When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
So far we hit a running T308 during CC release when caused by a BSSMAP Clear
Request, and we loudly log that as error.
However, now I understand that T308 is a direct cause of the dispatch of a REL
IND towards MNCC, which is used to indicate teardown to MNCC. So during
_gsm48_cc_trans_free(), we first clear all timers, then invoke
mncc_release_ind() which starts another timer (useful for graceful CC Release,
but in this code path the intention is immediate release). Simply immediately
cancel the timer again and release the conn.
A separate question is whether a BSSMAP Clear Request should be less aggressive
in releasing the connections; i.e. instead of calling trans_free() all around,
to rather ask each transaction to "please stop soon", somehow.
Related: OS#3062
Change-Id: I231fdb574a086a206321148474cbdc7ca9cf39f0
If an error on the MGW side occurs, the MSC may send out
a DLCX command that contains a wildcarded endpoint name.
Wildcarded DLCX commands are legal in principle but not
in the context of an error on a single endpoint. Apart
from that osmo-mgw is (not yet) capable to handle
wildcarded DLCX command.
The problem is caused by a wrong error handling. When the
first (RAN) CRCX fails the error handling logic tries to
perform a DLCX, but since we did not receive a specific
endpoint name yet, the buffer containing the endpoint name
is still initalized with the wildcarded enpoint name, but
the error handler and the code that generates the DLCX is
not aware of that.
- Perform a check in the error handler function that
checks if a DLCX can be made (a specific endpoint
name is set
- Correct the flags in the code that handles the first
CRCX so that no DLCX is requested in the case of error
Related OS#2882
Change-Id: I64c2a82016d854ad446fd49a5d76a28324e8bd4b
The logtext currently logs the pointer (address) of the string
variable that holds the endpoint name, rather then the endpoint
name itself.
- Use %s instead of %p in format string
Change-Id: I01b3d07aeedd72be60361249a5bf80fbb68b7bb8
I assumed that trans_free() would always be called before freeing the FSM. But
the actual conn free dance that tries to make sure a release is triggered from
all directions actually may run into a situation where conn->fi is NULL.
The situation is described in OS#3125.
For now simply drop the assert.
The subscr conn and FSM dealloc will soon be glued firmly together; but I want
to add a test against OS#3062 before that, and that would also hit above assertion.
Related: OS#3125 OS#3062
Change-Id: I5c30e0f9545fb76615776ff6cc16b56aeb5b043a
In the old days, OsmoNITB couldn't process any SMS that wasn't between
two subscribers on the same NITB.
We've long re-worked the internals in order to process SMS with
arbitrary sender MSISDN (e.g. from SMPP). However, the VTY command
"subscriber ... sms" was never updated, it seems.
Change-Id: I62b17e0a67989484415f0df2c8cb4ff1f94dbf2b
Closes: OS#3151
The DLCI field of the DTAP header indicates the SAPI as well as the
data link (main DCCH or SACCH). We must make sure to use the correct
DLCI when sending DTAP to the BSC.
We achieve this by
* storing the DLCI in the msgb->cb while parsing the DTAP header
* storing the received DLCI (from msgb->cb) in the transaction for
mobile-originated transactions
* using the trans->dlci to sent msgb->cb when transmitting L3
* filling the DTAP DLCI value from msgb->cb when transmitting DTAP
For MSC-originated transactions, we choose a DLCI value corresponding
to the service (SAPI=0 for CC, SAPI=3 for SMS) and store that in
trans->dlci.
Closes: OS#3150
Change-Id: If511b20f52575054cab1346d99a8cb68d827fdbf
The current msc_subscr_con_allocate() was in fact only used by msc_vlr_tests,
while both a_iface_bssap.c and iucs.c did their own duplicate code of
allocating the gsm_subscriber_connection struct. Unify.
Drop the old msc_subscr_con_allocate(), instead add msc_subscr_conn_alloc().
The new function also takes via_ran and lac arguments directly.
The conn allocation will soon be closely tied to the subscr_conn_fsm instance
allocation, so place the new function definition alongside the other
subscr_conn_fsm API, and match its naming ("conn").
Related: OS#3122
Change-Id: Ia57b42a149a43f9c370b1310e2e1f512183993ea
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
'subscr_conn_from' could mean anything: from what, RAN type? BSS identifier? MM
action? Clearly name it as the Complete Layer 3 kind it represents.
Related: OS#3122
Change-Id: I6263a80e6db01c2ca48df6c58b05e2fd19347057
Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
Move gsm48_* functions from common_cs.c to libmsc/gsm_04_08.c.
Drop sms_next_rp_msg_ref(), it is just a bunch of bloat around "next_rp_ref++".
Apply the "++" instead, in gsm_04_11.c.
libcommon-cs is now empty, to be removed in subsequent commit.
Change-Id: Ibc410803ce8e273b626124ab9fc934f04df3ae50
Move to libmsc/osmo_msc.c (for lack of a better place and reluctance to create
an own file just for gsm_network_init()).
Change-Id: I2279eee4db6f6687726bfd55841b3748d4930f15
classmark_is_r99() is only used in gsm_04_08.c, move there as static.
rrlp_mode_* is only used in msc_vty.c, move there as static.
Move ran_type_names[] to msc_ifaces.c.
Change-Id: I5381c72af6841829fbc65940fd7d6f4d5cf583df
Drop tall_bsc_ctx; in mncc_sock_init(), talloc the mncc_sock_state from
gsm_network.
In tests or utils, move from using an extern tall_bsc_ctx to a local root
context pointer.
Change-Id: I92c252be1d1e7634f1653de47d37c99d77d9501c
Apply more concise logging categories in each main scope. The bulk goes to
msc_main.c, obviously, while tests and utils get a slimmed down bunch of
logging categories.
Change-Id: I969a0662ba273f3721b6820d02151b7a5b8014b8
Now that all VTY definitions are in the same file, we no longer need
gsmnet_from_vty(). Just have one static struct gsm_network *gsmnet populated by
msc_vty_init() and use it in all VTY functions.
Change-Id: I5cb3712a4f4245feb62d42f1b041fe94de5fac1b
From openbsc.git, we still have osmo-msc's VTY definitions spread across
various places. Combine:
- Move the go_parent_cb() and is_config_node() to msc_main.c, drop
common_vty.c.
- Move all of vty_interface_layer3.c into msc_vty.c.
- Move all of common_cs_vty.c into msc_vty.c.
- Move bsc_vty_init_extra() into msc_vty_init().
- Drop some unused definitions
No functional nor cosmetic changes have been made in the moved code, plain
copy-paste moving (even though the unidiff might look like edits in some
places). I might have adjusted some blank lines though.
Change-Id: Ia818c00ab613a19a34080b160d763b55c19f76b1
In trans_free(), call subscr_conn_release_when_unused(), so that we are sure to
clean up after the last transaction is done.
This fixes an error where a conn lingered after a CC failure, because that code
path forgot to trigger cleanup.
Rationale: so far we were triggering the release check after each DTAP dispatch
(compl_l3 and "normal" DTAP), which is sufficient for properly closed
transactions. We also need a check for when a timeout clears an erratic trans.
Adjust test expectation of test_call_mo_to_unknown_timeout to show that the
error is now fixed.
msc_vlr_test_reject_concurrency now sees an additional release checking event
when the SMS transaction is done, which is expected and does not affect the
test otherwise.
Related: OS#2779
Change-Id: I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb
It's pretty amazing that we print error messages anrd return error
codes, but nobody ever looks at the error code and/or closes the
connection. Let's change that.
Change-Id: Iec693d8012a7816d1ded8206c2d979ac0546fb6e
If both sides are sending RESET at the same time, they are not aware
of each other. This leads to synchronization problems in wich
the remote side is transmitting e.g. a COMPL L3 INFO after receiving
a RESET ACK, but before even receiving or processing the RESET in
the inverse direction. So let's treat receiving a RESET as an implicit
RESET ACK to any RESET we may have sent.
Change-Id: I0ae34fbb3735592bb7cffa5aaf421b14a8acc90e
Fixes several of these type of warnings:
include/osmocom/core/fsm.h:123:38: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘char *’ [-Wformat=]
LOGP((fi)->fsm->log_subsys, level, "%s{%s}: " fmt, \
^
src/libmsc/msc_mgcp.c:277:71: note: format string is defined here
"CRCX/RAN: creating connection for the RAN side on MGW endpoint:0x%x...\n", mgcp_ctx->rtp_endpoint);
~^
Change-Id: I17b7bed8fc39612286ba66f250b6b26da01d38c0
The higher layers (gsm_04_08.c) are informed errors occur. But it
is not checked if the call was already released. If an error occurs
after the call control stack calls msc_mgcp_call_release() then
the higher layers might already have cleaned up and the code
accesses memory that is already freed (trans)
- fix use after free by guarding the call to mncc_tx_to_cc()
Change-Id: I78f1b6a9149488a4ad3f120c1e190a83c07d4b89
Related OS#2881
Related OS#2882
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
gsm_04_08.c seems to contain some lines of old debug code that
is commented out. Presumably the commented lines are a leftover
from a debug session.
- remove those commented code lines
Change-Id: Ifb84e4b0696fef1326c3f9ebc8427581057db44f
Use the new gsm0808_dec_cell_id_list2() API to decode the cell
identifier in the bssap COMPLETE LAYER 3 information message.
Also, actually compare the MCC-MNC in WHOLE_GLOBAL and LAI_AND_LAC
cell identifiers to the network configuration, and drop messages
with mismatching MCC-MNC (addresses OS#2980).
Related: OS#2847
Related: OS#2980
Change-Id: I855477507e4d65fb9890da0ceea26dd2c4dfaf82
osmo-msc still uses endpoints that are allocated locally by the
MGCP-Client. Since osmo-mgw now supports the more comfortable,
dynamic variant we should make use of it.
- Replace the endpoint numer allocation by the client with a
wildcarded CRCX. Use the endpoint that is assigned by the
MGW.
Related: OS#2710
Change-Id: Iee3e446b6689626516f01c521abe3d4603cd3e13
When a truncation check (osmo_strlcpy()) fails handle_error()
is called with MGCP_ERR_NOMEM as cause code. Which finally
results in an "out of memory" message. MGCP_ERR_NOMEM is only
used for failed truncation checks, so it makes sense to choose
a message that describes the cause of the problem better.
- rename MGCP_ERR_NOMEM to MGCP_ERR_TOOLONG
- replace error message string
Change-Id: Ifedb85c1933a30b2aa491b495119919f45782e2c
Make sure to deactivate trans.cc.timer when freeing a CC transaction.
Log an error if should be necessary.
This prevents a segfault when we receive a BSSMAP Clear Request from BSC during
an ongoing CC operation. The BSSMAP Clear Request currently triggers immediate
freeing of the conn, while we should still do a graceful release first. While
this patch does not fix the underlying error, it does prevent the MSC from
crashing due to a stale timer, whatever the cause might be.
Related: OS#3062
Change-Id: I86b666f23402a6d94af2d903e514770d1fd5157f
When the FSM reaches ST_HALT it frees itsself and all context
information but it is not ensured that there are still pending
MGW transactions that might hit late and eventually cause a use after
free situation.
- if an MGW transaction is still pending, cancel it.
Change-Id: I8ff55e48a95cc4c556a97ad2593bad1cc1aa69bd
When the MGW does not respond to an MGCP message then the mgcp FSM
terminates, but the CC handler (gsm_04_08.c) is not informed. This
lets the CC handler think that the MGCP connection would be successful,
so it also does not take any action to release the non functional
connection.
- make sure the CC handler is always informed on any kind of
error, especially on MGW timeouts
Change-Id: I3fcd0d71fad53274e82f6d87c80042d06283bc5d
Related OS#2881
Related OS#2882
Since commit 2483f1b050 the function
gsm48_tx_mm_info() was not called anymore. No MM info messages were
transmitted to phones even if MM info messages were enabled via VTY.
With this commit, we call gsm48_tx_mm_info() after successfully
processing an IMSI ATTACH location update.
Change-Id: Ice5963d84253eb8c803cd2dfa8b25a4db5382827
Related: OS#2850
struct gsm0808_cell_id_list in libosmocore is deprecated by
https://gerrit.osmocom.org/#/c/6509/
This updates the only API user I am aware of.
Change-Id: I67377270cf3b081ac5dc9cd7b4dc28f74143753a
Depends: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Define the struct vlr_ciph_result member .imeisv not as a char* but a char[] of
appropriate length, to avoid the need to point to external memory.
Thus fix a use-after-free in msc_cipher_mode_compl(), which defined the
imeisv[] buffer in a sub-scope within that function, so that the .imeisv
pointer was already invalid when fed to vlr_subscr_rx_ciph_res().
Did you notice that the commit summary rhymes?
Closes: OS#3053
Change-Id: I90cfb952a7dec6d104200872164ebadb25d0260d
Do not interpret the SRES/RES length returned in the auth response as the R99
capability bit, instead determine it from the actual Classmark information
associated with the conn.
This fixes the is_r99 flag passed in to vlr_subscr_rx_auth_resp(), which ends
up in the struct vlr_auth_resp_par dispatched to the auth_fi and influences the
authentication acceptance.
Though the effect of a wrongly-set-to-false R99 flag is not harmful in this
code path, let's not get this confused.
Change-Id: Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
Instead of just closing down the conn hard, actually feed invalid auth response
data to vlr_subscr_rc_auth_resp() in order to trigger all the actions we want
to see with a failed authentication:
- a GSUP signal that the auth failed,
- a LU reject.
Verify this in new test_wrong_sres_length() in msc_vlr_test_gsm_authen.c.
Note that in gsm48_rx_mm_auth_resp(), the is_r99 flag is falsely derived from
the RES length, which upcoming commit Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
will fix.
Change-Id: I4179a290069ac61d0662de4ec7ca3edb76988899
In gsm_silent_call_{start,stop}(), return meaningful error codes and interpret
them on the VTY to clearly indicate the result.
Change-Id: Id5abb8f2ba901689e03040af8e51483b6c618e7f
Rationale: in the HLR, it is called 'msisdn' after the database column, so a
user going back and forth between osmo-hlr and osmo-msc would appreciate being
able to type 'msisdn' in the MSC's vty as well.
Change-Id: I7b46f9736421e8edd8a95ae89e025ebe486fde4c
Before this, it was for example possible to crash the MSC by the vty 'show
subscriber' command, which would dereference a potentially stale
vsub->msc_conn_ref pointer.
Related: OS#3050
Change-Id: Ia4105d9f135ba3216ad3c86157be7658b1d568fb
When osmo-msc restarts it looses all information about the BSC. The
BSC will not be aware of the reboot and on the next communication
attemt it will notice that something is wrong and start the reset
procedure on his side. osmo-msc will receive the reset messages
and send a reset.
The reset is received. Osmo-msc detects that no context information
is created yet. The context is created. Then it is checked if the
UNITTDATA message that came in is a reset. If it is one. Nothing
happens. The UNITTDATA is passed on and triggers the RESET-ACK
some layers above. Unfortunately by the current code this also
means that no reset FSM is created and therefore a_reset_conn_ready()
can never be true. Which means it will also drop any legitimate
reset from the BSC in the future.
- Ensure that the reset FSM is always created when a new BSC
context is created
- Make sure that reset related traffic always passes so that
the higher layers can handle the procedure properly
Change-Id: I3fdcec5dbeaa0e21fd6a92568a623faa368239be
The vlr_subscr_get() can return NULL if its argument is NULL
(which isn't checked for) so before dereferencing it's result
we should check for it.
Change-Id: I13632908d0b67323202effa9dd6f29732a12cc91
Actually call msc_vlr_set_ciph_mode() and wrap away a_iface_tx_cipher_mode()
and ranap_iu_tx_sec_mode_cmd(). Hence we'll see decisions and errors in
msc_vlr_set_ciph_mode() as well.
Change-Id: Id23bc245d4b5707edcd27c44db272fbb211bf9bd
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore)
Change-Id: I82f0016d9512ee8722a3489a3cb4b6c704a271fc
The FSM (fsm_msc_mgcp) lacks a proper definition of the FSM event
names. This causes problems when inspecting the FSM using the VTY.
- Add proper FSM Event names
Closes: OS#2924
Change-Id: I6823756a63b08a71e5518130e49751aa073dbcd2
Call osmo_fsm_vty_add_cmds() to make osmo_fsm VTY commands available
in osmo-msc's VTY interface.
Change-Id: Iaf970f6039c3f668f275dd8c21fb9071774a5d9e
Related: OS#2967
Change I0d57ac214e574e267fa9752daf76566197b9aa64 forgot to remove this
file along with meas_feed.c.
Note also the weirdness: that patch removes the proper
include/osmocom/msc/meas_feed.h, but there's also this other one.
This libmsc/meas_feed.h always existed from the start as an unused
orphan, see:
https://git.osmocom.org/osmo-bsc/diff/openbsc/src/libmsc/Makefile.am?id=b4771a6871efb3cf12b371aedc575912984ca528
No need to drop from Makefile.am, since it is already gone from there.
(meas_feed from the old osmo-nitb (openbsc.git) has / should have moved to
osmo-bsc. There are no measurement reports in the MSC. Refer to osmo-bsc.git
instead from now on.)
Change-Id: Ib2566013dd30b21ce2774cd4cc7dcba2408f938f
The ID will include the type of connection (GERAN_A, UTRAN_IU) followed
by the SCCP conn_id.
This can be used for the fsm instance ID before we know the IMSI.
Change-Id: I4b875772e3994ad3458ee60dbf880604486d9afd
OsmoMSC is using whatever reject cause is apropriate in the given
situation. This user-configurable reject cause only had relevance
in OsmoNITB, and hence it is an unused parameter that can be removed
in OsmoMSC.
Related: OS#2528
Change-Id: Ie1f39e706477aaf42051877b52d4b3ae1c5f138e
When we receive bearer capabilities from MNCC and encode thme into
a CC message, we have to also update our "cache" inside 'struct
gsm_trans'. Only that way, the BSSMAP ASSIGNMENT code is aware of
the actual current/present bearer capabilities such as permitted speech
codecs.
This will in practise only work if the related CC/MNCC message with
berer_cap IE will happen before the MSC performs the BSSMAP ASSIGNMENT
procedure. Our logic still needs to change in a way that the CC/MNCC
code in gsm_04_08.c detects if trans->bearer_cap != new bearer_cap, and
in that case triggers a new follow-up BSSMAP ASSIGNMENT.
Change-Id: I6838dc0c8c4c2c6bba385da548c92f3fc91060c1
Closes: OS#2854
When we receive a MNCC_SETUP_REQ primitive from the external MNCC
handler, we must not only encode it into the TS 04.08 CC SETUP, but
also keep it around in the "trans" structure representing this voice
call, as it is needed e.g. at BSSMAP ASSIGNMENT time.
Change-Id: Ib6919d148ff6687112e8166dbde947be19e70a76
Related: OS#2322
Closes: OS#2929
There is no encoding of speech version / preference on Abis, only
on L3. L3 is carried on Um, Abis and A. Hence, referrin to Abis
in function names and comments is irritating.
Change-Id: Id226cd1414ca2a92356801bc71f43102d03ba37e
We cannot use conn->a.conn_id after conn has been free'd inside
msc_clear_request(). Let's store conn_id before that call to
ensure we avoid an use-after-free situation.
A more elegant (but more intrusive) solution would be to
move the SCCP connection clearing into the FSM itself.
Change-Id: Ibe41aa503e9f7cbeb05dce4b1a20b3eac85e619f
Closes: OS#2922
As in GSM/3GPP networks emergency calls carry no explicit destination
number/address, add a VTY commadn to patch in some destination handler
in the EMERGENCY SETUP before delivering to [internal or external] MNCC.
Change-Id: I7c9f43ba312fadda2b9a9483b3cf50e4abca9599
When we receive a msgb-wrapped primitive from the SCCP provider (stack),
it transfers msgb ownership to us (the SCCP user). The existing code
passed the msgb ownership down into all the various downstream
functions, which each then had to take care of msgb free'ing.
Not all of the paths did eventually free the msgb. And at least one
path used data from the primitive *after* the free
Let's restructure this in a way that no msgb ownership is transferred
down the call chain. Instead, there's one common msgb_free() in
sccp_sap_up(). We can do this as nobody is queueing or otherwise
keeping the msgb.
Change-Id: Ie65616ccb55ec58a0224bbe3c8e004e6029ef3e6
SUMMARY: AddressSanitizer: heap-use-after-free /home/laforge/projects/git/osmo-msc/src/libmsc/a_iface.c:538 in sccp_sap_up
Having all BSSAP related logs in the "DMSC" category is overly
generic, and dosn't provide useful granularity.
Change-Id: Id1e52dad03840dfd026fb23f3845a8771c8cc308
There's little point in resolving the gsm_subscriber_connection in each
and every function handling connection-oriented messages. We can
resolve it once and dispatch the already-resolved conn into the
function, instead of passing the raw sccp_user and a_conn_info.
Change-Id: Iea85527ea4d4cde7b36cc28a8027362c1570518f
Clean up the log statements in a_iface*.c, which was very inconsistent.
For example "BSC sending" is very confusing. We are receiving from the BSC,
and it did already send the message, it is no longer in the process of
sending it if we have already received it in the MSC.
Change-Id: Id50e964d86713ae506d4e7657159797e09501d99
During normal operation, regular messages occurring during processing
of a call / transaction should not be higher than LOGL_INFO.
Change-Id: Ibd04ade47b249406696c7d0b660474afc4f4adee
If the BSC is contacting us for the first time and sending a BSSMAP
RESET, then we should simply ACK that and transition into the
"connected" state, where connection-oriented and connectionless
procedures are permitted.
This patch is a bit large for such a seemingly simple behavioural
change, but the existing data model didn't permit a more
straight-forward implementation.
Change-Id: Ie67e7ed20a6c42afe99bafef96d85a4e083dd057
Closes: OS#2914
Using this argument we can create the state machine in the
"already connected" state, i.e. without starting an outbound
RESET procedure.
Change-Id: Ibf569d57300965cd47084fa0bff54aa67679e2a1
It is quite important to have some way of runtime state introspection
about the major objects inside osmo-msc. This patch adds some basic
capabilities to dump the most important information about
subscriber_connections and transactions (like calls/sms).
OsmoMSC> show connection
--ConnId ------------Subscriber RAN --LAC Use --Tokens CSA A5 State
00000001 IMSI:26242000000006 A 23 1 00000004 --- /0 SUBSCR_CONN_S_COMMUNICATING
Change-Id: I1c457c1eac20188f67b8379a36cfda3a085fcef4
The MGCP FSM implements a timeout when waiting for the RAN to complete
the call (assignment complete, alerting, connect...). This timeout
is currently set to 10sec. This means if the other end did not pick
up after 10sec, the MGCP connection will be lost while the phone keeps
ringing. When the other end finally picks up, the call gets
disconnected.
This behavior is odd and requires a proper fix. For now increasing the
timeout to 120sec. will decrese the probability that he problem occurs.
- Increas RAN timeout to 120sec (2 min).
Change-Id: I5a11d53f9701d9b11b18d7026ff2241c7c0b57f5
We don't usually put space before in-place increment or decrement. Let's
make code look similar to other Osmocom projects.
Change-Id: I5962431ad16c97e412939dc1b8949f6361a5c26e
in the current implementation we still use osmo-bsc_mgcp, which
has many problems and is also obsoleted by osmo-mgw.
integrate osmo-mgw and re-implement the current switching using
an osmo fsm.
Depends: osmo-mgw Iab6a6038e7610c62f34e642cd49c93d11151252c
Depends: osmo-iuh I3c1a0455c5f25cae41ee19229d6daf299e023062
Closes: OS#2605
Change-Id: Ieea9630358b3963261fa1993cf1f3b563ff23538
Using following semantic patch:
@@ expression A, B, C; @@
- osmo_strlcpy(A, B, sizeof(A));
+ OSMO_STRLCPY_ARRAY(A, B);
Which was applied using following command:
spatch --dir src -I src --sp-file strlcpy.spatch --in-place --recursive-includes
All the calls to osmo_strlcpy() which use destination buffer obtained
via sizeof() were replaced with the corresponding wrapper macro.
Change-Id: I67b482dedfa11237ac21894fc5930039e12434ab
Related: OS#2864
According to TS 24.007 Section 11.2.3.2.3, it is possible that uplink L3
messages are duplicated in some scenarios, particularly during
assignment/handover procedure.
To avoid L3 entities from seeing duplicated messages, there's a modulo-2
or modulo-4 message sequence counter, based on which the MSC can detect
and suppress such duplicate messages.
It appears that even our unit tests were wrong in that regard so far.
Rather than manually adjusting each and every message, let's make sure
that the sequence number generation always increments as expected, and
that during matching of incoming messages, sequence numbers are masked
out.
Note: the tests will only pass from libosmocore Change-Id
Iec875a77f5458322dfbef174f5abfc0e8c09d464 onwards, due to
gsm48_hdr_msg_type() being broken in earlier versions.
Change-Id: Id15e399ab7e1b05dcd426b292886fa19d36082b1
Closes: #2908
Make the submit_to_sms() funcion aware of the message mode. If the
message does not require real-time "transactional/forward mode" we
can store it in the SMS database even if subscriber B cannot be
found in the VLR at this point in time.
This should should make the esme_ms_sms_storeforward test in
osmo-gsm-tester pass (a tweak to this test's expectations will
be needed as well, because the test currently assumes that an
invalid phone number for subscriber B will fail immediately,
rather than cause the message to eventually expire).
Change-Id: Ic3d78919568ad9252b4d19c3ddab5068d1c52db2
Related: OS#2354
There's no point of ever asking a MS to perform ciphering using an
algorithm it advertises no support for. Let's hence use CLASSMARK
information to figure out the intersection between MSC policy (VTY
command) and MS-reported CLASSMARK.
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
NOTE: Like the previous code, OsmoMSC does *not yet check* whether
the configured cipher is compatible with the MS capabilities as
reported in CLASSMARK! The network hence might choose an algorithm
not supported by the phone. Fixing this is subject to another patch.
Closes: OS#2460
Change-Id: I79a4e2892eb5fbecc3d84e11dceffb7149db264b
The VLR code seems to have the assumption that there is one particular
algorithm to be used, as opposed to one of a set of algorithms.
What's missing is basically to decide when/where to pick the best
algorithm within the capabilities of the phone (classmark) and the
network configuration (net->a5_encryption_mask). So far, libvlr has no
notion of classmark. Rather, libmsc has.
Why does the VLR care about the particular algorithm at all? The VLR
should probably simply decide if it should use encryption or not, and if
so, the MSC will figure which algorithm to use.
Change-Id: I5ed80ca2086560a5975a758ec568a034a9a8ab89
Delete expired SMS whenever we are done processing an SMS-related signal.
In order to minimize additional latency only one SMS is removed at a time.
Change-Id: I56cbe716e52b679c4b94f6cbb4a171306975be2e
Related: OS#2354
Accept any SMS and store it in the database, even if the receiver of
the message cannot be determined when the message arrives at the MSC.
This fixes https://osmocom.org/issues/2354 ("SMSC: Store&Forward not
working for subscribed but unregistered MS").
Change-Id: I833c3abd290d2bc5fceec7457e3933c9600e6c24
Depends: Icd6093b7b5d8db84b19a0aa47c68182566113ee2
Depends: I56cbe716e52b679c4b94f6cbb4a171306975be2e
Depends: Icf786f9b1efabfe7407fb6414ec0d326d8f7244a
Related: OS#2354
We already delete SMS which have been sent successfully. However, there
are plans to accept SMS for any subscriber in order to fix the problem
described in https://osmocom.org/issues/2354 ("SMSC: Store&Forward not
working for subscribed but unregistered MS").
This means we may end up storing SMS which never get sent, e.g. because
the B subscriber doesn't actually exist. This could lead to a higher
degree of SMS database growth over time, and therefore we need a way
to keep database size under control.
As a first step, introduce a DB function which removes an expired SMS,
and add a VTY command which removes all expired SMS from the DB.
Later commits will build upon this to remove expired SMS automatically.
The SMS expiry time period is currently hard-coded to 2 weeks.
We could make this configurable in the future if desired.
Change-Id: Icd6093b7b5d8db84b19a0aa47c68182566113ee2
Related: OS#2354
osmo-msc still had large amounts of dead code that came along from
openbsc.git. This commit removes a lot of it, mostly stuff relevant
only to the BSC side of things (or even GPRS).
Change-Id: I247def85da2dc3ec461389fb74414a0d964e7e3c
Related: OS#2528
According to TS 44.008 Section 3.2.1.31, the "Layer 3 Message Contents"
IE of the BSSMAP Cipher Mode Complete is optional. The BSC may hence
inlcude that IE or not include it.
Without this patch, OsmoMSC is crashing if that IE was missing:
<000a> a_iface_bssap.c:699 Rx BSC DT: 00 03 55 2c 02
<000a> a_iface_bssap.c:629 Rx MSC DT1 BSSMAP CIPHER MODE COMPLETE
<001f> a_iface_bssap.c:91 Found A subscriber for conn_id 1
<000a> a_iface_bssap.c:415 BSC sends cipher mode complete (conn_id=1)
==5611== Invalid read of size 8
==5611== at 0x128D0F: msc_cipher_mode_compl (osmo_msc.c:159)
==5611== by 0x114F62: bssmap_rx_ciph_compl.isra.8 (a_iface_bssap.c:432)
==5611== by 0x113267: sccp_sap_up (a_iface.c:520)
Change-Id: I722f9b468b157b3736918f090daaa9489a6028ee
Closes: OS#2871
Even if we're not implementing CM re-establishment, we should give
the MS a clear indication that we don't do and follow the related
procedures of TS 24.008 by sending CM SERVICE REJECT.
Closes: OS#2869
Change-Id: I1c0473647295456fd635b8df6079ee48695dcf2e
Measurement reporting (and the relate feed) are functions of the BSC,
not the MSC. This code should never have been inherited from OsmoNITB
to OsmoMSC in the first place, let's remove it.
Change-Id: I0d57ac214e574e267fa9752daf76566197b9aa64
When we receive a CM Service Request, OsmoMSC should eventually verify
what kind of service it is the phone requests, and whether we support
that service.
Change-Id: I499730d760dc9ac7f599e09959c6eac4452f2eab
Closes: OS#2668
OsmoMSC rejects an Emergency Call with IMEI as mobile identity with
"semantically incorrect message" which is clearly wrong. According to TS
24.008 4.5.1.5 we should reject with cause 5 "IMEI not accepted"
Found with TTCN-3 test case MSC_Tests.TC_emerg_call_imei
Change-Id: I2f7ab0e32b914a112c0b17c523d149ccd0299099
Closes: #2866
MNCC has a MNCC_F_EMERGENCY flag to indicate that the mncc.emergency
field is present. However, OsmoMSC never sets this flag.
Change-Id: I0ebd8f88e483172988f4a0cb0636b4160688d8ad
Closes: OS#2865
An emergency call should be logged different from a normal call,
and we also increase the log level from INFO to NOTICE in such a
situation.
Change-Id: I83f3b8bd0aeda70f03aa7b8d264a9008d10d5687
There appears to have been no input validation whatsoever on MNCC
messages. Hence it was very easy for an external MNCC handler to
crash OsmoMSC, such as in OS#2853
Change-Id: Idaf3b8e409c84564b1eb26d01a19c605f89b14f4
Closes: OS#2853
Quote the argument to sqlite's datetime(). Otherwise, the timestamp
stored in the database reads back as a negative value for some reason.
Before:
1032 validity_timestamp = dbi_result_get_datetime(result, "valid_until");
(gdb) p validity_timestamp
$2 = -1516814654
After:
1032 validity_timestamp = dbi_result_get_datetime(result, "valid_until");
(gdb) p validity_timestamp
$2 = 1516814654
Change-Id: Icf786f9b1efabfe7407fb6414ec0d326d8f7244a
As the include file gsm_data.h is generic (does not depend on osmo-iuh0s
iu_client.h), rab_assign_addr_enc is declared as "int" instead of "enum ranap_nsap_addr_enc".
osmo-msc/src/libmsc/msc_vty.c: In function ‘msc_vty_init’:
osmo-msc/src/libmsc/msc_vty.c:212:30: warning: passing argument 2 of ‘ranap_iu_vty_init’ from incompatible pointer type [-Wincompatible-pointer-types]
ranap_iu_vty_init(MSC_NODE, &msc_network->iu.rab_assign_addr_enc);
^
Change-Id: I1b63ee350911bdf772a2324fff55035275a455c4
Compute a validity timestamp based on SMS validity time.
Store the computed value in the database and recompute the validity
time when an SMS is read from the database.
Change-Id: Id27c250d3a64cd109416450e8ca155b18a8b9568
Currently the SMS database keeps accumulating entries for each SMS.
These entries are never deleted automatically. With this change, we
start deleting SMS which have successfully been sent to subscriber B.
Change-Id: I3749855fe25d9d4e37ec96b0c2bffbc692b66a78
If we cannot open a connection to the sqlite3 database, show the name of the
database we failed to access, and also hint at the fact that a likely reason
for the problem is a missing sqlite3 driver for libdbi.
Change-Id: If1c0026e882984b4358ce116ec4a7ad40340517c
There is no any significant reason to define static function
'send_own_number' after the code that calls it.
Change-Id: I7f76f278c09489dccd96921610e8d06efa679ff2
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
The expire_lu is never used but is printed for every subscriber. Let's
remove it to avoid confusion.
Change-Id: I6f7ad1670836384d1e6a58f47a13464fdbbf8509
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
These rx functions are only used for the A interface, hence the names should
not suggest general SCCP rx (which Iu also has).
Change-Id: I6815c3d4dea4c2abfdff1cf0239ada6a9254f351
Add LOGPBSCCONN for struct bsc_conn.
Use LOGPCONN or LOGPBSCCONN whereever possible.
Tweak a few log messages and remove one redundant log.
Change-Id: If9cb0e7a5cef2ec37a1a7c548aecf11a11c22eec
The target buffer in libsmpp is 16 bytes long, and snprintf() may omit the
terminating zero. There seems to be no handling for unterminated strings, so
osmo_strlcpy() is the safer (and presumably more optimal) choice.
Change-Id: I5845666201f945ea9f83da62f2dd4bec52eb74cf
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
So far we were always sending the Kc retrieved from osmo-hlr. If the 2G auth
algo is set to milenage, the 2G Kc coincides with the one derived from 3G
tokens, but if 2G is set to a different algorithm, the Kc received from the
osmo-hlr is not usable for ciphering when UMTS AKA was used for authentication
(on R99 capable GERAN and MS).
Implementation: To decide whether to use UMTS AKA derived Kc or the Kc from the
auth vector, use the umts_aka flag added to set_ciph_mode() in a previous
patch. Use osmo_auth_c3() to derive the GSM AKA Kc from the UMTS AKA CK and KI.
Related: OS#2745
Requires: I85a1d6ae95ad9e5ce9524ef7fc06414848afc2aa (libosmocore)
Change-Id: If04e405426c55a81341747a9b450a69188525d5c
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
To decide (in an upcoming patch) whether to use UMTS AKA derived Kc or the Kc
from the auth vector, the set_ciph_mode() from vlr_ops needs to know whether
UMTS AKA is being used. This could possibly derived from the msc_conn_ref, but
all flags are already available in the vlr_lu_fsm and vlr_access_req_fsm. Hence
add a umts_aka flag to the set_ciph_mode() callback invocation. The VLR FSMs
thus decide whether UMTS AKA or GSM AKA is to be used during Ciphering Mode
Command, which makes more sense than re-implementing the same decision process
in the MSC.
I considered placing the Kc derivation in vlr_set_ciph_mode() and only tell the
MSC's set_ciph_mode() implementation the precise keys it should use, but the
RAN particulars, and whether a Kc is used at all, rather belong with the MSC.
Related: OS#2745
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I983c48347faf4ee1b405d8174b4e006c904157cf
a_iface_tx_cipher_mode() is a bit too far away from the VLR to be handling its
ciphering enums. Instead, construct the gsm0808_encrypt_info in the
msc_vlr_set_ciph_mode() callback.
Greatly simplify the sanity checking code: a_iface_tx_cipher_mode() no longer
needs to re-verify the presence of the gsm0808_encrypt_info contents.
Change-Id: Id46f9a513b555d0a481f7124c9984c2b5b196b3e
The bit shifting is performed in gsm0808_enc_encrypt_info(), and must not be
done when populating the gsm0808_encrypt_info struct.
Provide vlr_ciph_to_gsm0808_alg_id() to translate the enum vlr_ciph to the
GSM0808_* constants we need to put in the gsm0808_encrypt_info struct instead.
Related: OS#2745
Change-Id: If75f95e8a5cc8b9979610ce6d746c1f0073ee39a
When the subscriber has no MSISDN, we might construct an invalid SQL statement
such as
... AND dest_addr= AND ...
Instead, don't even query for empty MSISDNs.
Related: OS#2706
Change-Id: I7d6169d774b2da04b3051957e364fe620feed51e
Adjust test expectations accordingly.
The error was:
==16084==ERROR: AddressSanitizer: heap-use-after-free on address 0x61500000f5f4 at pc 0x561be639ac2b bp 0x7ffc0aabbe40 sp 0x7ffc0aabbe38
READ of size 4 at 0x61500000f5f4 thread T0
#0 0x561be639ac2a in _msc_subscr_conn_put ../../../../src/osmo-msc/src/libmsc/osmo_msc.c:384
#1 0x561be636070b in rx_from_ms ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:204
#2 0x561be6360b21 in ms_sends_msg ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:217
#3 0x561be635b40a in test_call_mt ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_test_call.c:328
#4 0x561be6363bb7 in run_tests ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:802
#5 0x561be63524ea in main ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:849
#6 0x7f6eebb3e2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
#7 0x561be6352fb9 in _start (/n/s/osmo/make-3G/osmo-msc/tests/msc_vlr/msc_vlr_test_call+0xdafb9)
Related: OS#2672
Change-Id: If0659a878deb383ed0300217e2c41c8c79b2b6a5
If a conn is attempted to be used when in release, log an error, but don't skip
tracking.
No current code path apparently hits this, according to msc_vlr_tests. Just
making sure that we will prominently see such errors when we introduce any.
Change-Id: I8dd20ee56ce5ad7a90fcd03a06604c383e5eed54
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
The BSC rate counters are a leftover from the nitb split.
Accessing them would result into a null-pointer exception,
because the struct isn't initialized.
Change-Id: I8c72ab8bf781d3f9a436eb1a27ac4d13df5e656b
If dispatching a conn timeout, the conn fsm will already have been discarded,
and we cannot fire any more events to it.
The expected test output changes illustrate that we are now omitting event
dispatches that happen *after* the same FSM was already deallocated.
Change-Id: I25af3e5a1b04e3a5c9f41956cbcbbdd8439c6457
The log message after the nullpointer check for conn tricks Coverity
Scan into detecting a nullpointer deref.
Include the log message into else branch to state the program flow
more clearly
Fixes: Coverity CID#178656
Change-Id: If6e962f4033c955ecd3539a719031a83c9b6205a
The reset context contains a string buffer to allow for setting
a human readable name, that is then displayed in the logs. Since
OSMO-FSMs already have such a feature there is no need for an
extra name variable.
Use LOGPFSML and the name parameter of osmo_fsm_inst_alloc()
to display the name of the FSM
Fixes: Coverity CID#178664
Change-Id: I5b051606791c5e085ca6bb1be20592127d48ceb5
Wen there's no SMPP support compiled in, and routing was successful,
we shouldn't return an uninitialized value.
Change-Id: I4abbbb5ab336a7e8da08d682f396baec3b56fa3a
Fixes: Coverity CID#174176
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: I34708c73d8084db4e6c83a39be8fdaeaa492d743
libmsc/a_iface.c and libmsc/a_iface_bssap.c still include
osmocom/sccp/sccp_types.h to get access to enums defining SCCP
cause values. Until that is resolved, we have to keep the build
dependency to libosmo-sccp-dev
Change-Id: I957dcb2bcce216d0fd81a58bfe869aca0e4624a8
Related: OS#2601
Currently, OSMO_ASSERT() is defined such that it ends in a semicolon, hence an
added ';' is redundant. However, the usual way this kind of macro should be
defined is
#define OSMO_ASSERT(x) do { ... } while(0)
so that the compiler requires a trailing semicolon.
To prepare for such a change possibly coming up in libosmocore, add ';' to all
OSMO_ASSERT() users.
Change-Id: Ic79c8b8f98a7f3bef761751d55a7e6125cf2c46d
Since Ifb8f3fc2b399662a9dbba174e942352a1a21df3f libosmo-mgcp-client has its own
definitions in mgcp_common.h, which conflict with legacy_mgcp/mgcp.h. This
cross-inclusion to support libosmo-mgcp-client is no longer necessary.
In the future, including libosmo-mgcp-client together with libosmo-mgcp will be
made possible, but not with libosmo-legacy-mgcp (because we don't care enough).
That is why including libosmo-legacy-mgcp headers would cause build failure.
Depends: Ifb8f3fc2b399662a9dbba174e942352a1a21df3f
Change-Id: I8e3359bedf973077c0a038aa04f5371a00c48fa0
The MSC should not fiddle with low-level SI details like rest octets
anyway. Unfortunately simply removing the header is impossible as it
causes massive fallout due to missing includes. Fixed it as well.
The only other parameter which required removal is cell_ro_sel_par which
is not referenced anywhere in the code anyway.
Change-Id: Ibff77330de056fad4288cd4c48d016aad8105354
I would have liked to add a regression test to verify this, but currently there
is no easy way to run CTRL tests and at the same time have access to the
osmo-msc in a way that simulates an attached subscriber.
Related: OS#2285
Change-Id: I003542b208ecf3713e9e67712d84ccb4c61af14e
After osmo-mgw changes I8e0b2d2a399b77086a36606f5e427271c6242df1 and
I99f7faab637cfcc22ece64a1dbcbe590f2042187, apply linking of new
libosmo-mgcp-client and renames to drop the "gw" from mgcp_client_*.
Also rename the gsm_network.mgcpgw to mgw, to indicate that the MGCP client is
used to contact the MGW (Media Gateway).
Depends: I8e0b2d2a399b77086a36606f5e427271c6242df1 (osmo-mgw)
I99f7faab637cfcc22ece64a1dbcbe590f2042187 (osmo-mgw)
Change-Id: I093ad02ca0e532f659447c785e09678b3e6f220d
The function gsm0408_dispatch() accepts a message buffer pointer
and accesses the l3h pointer. Even in a properly allocated
message buffer, this may lead into a segfault if the user forgets
to set the l3h pointer. This commit adds assertions to popup a
more expressive error message.
Change-Id: I43bd9bd1c170559aaa8dacaef25dba090744bcd5
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
libsmpp34 already converts received TLV integer values to native
endianess in libsmpp34_(un)pack.
Converting them again at receive time swaps the 2 bytes of
user_message_reference, then using a wrong value. As GSM03.40 spec
uses only 1 byte for the id, then only the high byte of the initial
value is used and eventually sent back to the ESME. Again, at that time,
htons() is not needed because libsmpp34 already handles that part.
See OS-#2429 for more details.
Change-Id: If748548a4a223e529a1110c89e483b599b406e8b
I already stumbled into 2 compilation environments which had Werror
enabled for -Wmaybe-uninitialized and the build failed, so let's
workaround this warning.
| smpp_openbsc.c: In function 'handle_smpp_submit':
| smpp_openbsc.c:216:9: error: 'sms_msg_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| memcpy(sms->user_data, sms_msg, sms_msg_len);
| ^
| smpp_openbsc.c💯15: note: 'sms_msg_len' was declared here
| unsigned int sms_msg_len;
| ^
| cc1: some warnings being treated as errors
Change-Id: I0901ddadb5f72e1585cb1797ac22c8ab95e83146
gsm_04_11.c sms_report_alloc()
Use the sms->text, not the sms->user_data to construct the report body.
This also prevents the potential output of non printable characters to
the log and or vty.
Change-Id: Id51bc9483ad6f52d6da74135605cfd12434c7c96
gsm_04_11.c: gsm340_gen_sms_status_report_tpdu()
When we construct the status report PDU, use sms->src
instead of sms->dst as the destination address
This way we tell the MS that the message was delivered
to the destination and not to itself.
This is relevant for phones that display a textual
representation of the delivery report.
Change-Id: I2d4f87ac777465de9bfb5a775a789a2691755ee9
Use new definitions in libsmpp34 to set the registered_delivery field
accordingly, as provided by I5b3afff1b3b77cccd949e0606914c7ac3ba6114c.
Moreover, do not set this header field to zero if status reports are
off, the deliver_t structure has been already zeroed so this not
required.
Change-Id: Ie78e17323796120f576b9c0e1bc5ccc32da8ee12
Replace magic numbers by esm_class definitions, which
have been added to latest libsmpp34 in Change-Id
I91afd8b462b8fd3b2c4c5b54f4eeb7ec5b730b65
Change-Id: I6c458690da60c8f3637680efbd718f6e8c6feb4c
submit_to_sms() now handles two TLVs, so find_tlv() is suboptiomal and
it can be removed, since it would result in two passes on the TLV list.
Use new smpp34_tlv_for_each() helper to iterate over the list of TLVs
that is available since I446929feed049d0411e1629ca263e2bc41f714cc.
Change-Id: I53a65164a6cc4abc6bf57d9a8dc275cf21c90222
The change-id I7276d356d805a83ebeec72b02c8563b7135ea0b6 added msg_ref to
the databse but forgot to remove the comment stating it's not being
stored.
Change-Id: I204f098c8f2a480405446113e2181b2c53700cf3
gsm340_gen_oa() returns a negative value if the output buffer that the
caller passes is too small, so we have to check the return value of this
function.
Fixes: CID 174178
Fixes: CID 174179
Change-Id: I47215d7d89771730a7f84efa8aeeb187a0911fdb
This patch adds gsm340_sms_send_status_report_tpdu() to build a
status-report. Moreover, set sms->report field if we see a SMPP
SUBMIT_SM with Delivery Acknowledgment esm_class, so this identifies
that this is a delivery report.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| | SUBMIT-SM |
| | esm_class = Delivery Ack |
| |<-------------------------------|
| | SUBMIT-SM-RESP |
| |------------------------------->|
| | |
| SMS-STATUS-REPORT | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | |
There is a FIXME message in this patch, that I just copied from
gsm340_gen_sms_deliver_tpdu() since TP-MMS is not supported by OpenBSC.
Change-Id: Ib70e534840308ed315f7add440351e649de3f907
SMPP DELIVER_SM messages with esm_class = Delivery Receipt need to send
this message reference (that the mobile phone allocates) to the ESME.
Thus, the ESME propagates it via SUBMIT_SM with esm_class = Delivery
Acknoledgment so that the SMSC sends the GSM 03.40 status-report to the
origin including this. Given this field is useful for status-reports, we
need to store it in the HLR database.
Moreover, we need a new field that specifies if the entry represents a
SMS status-report, to do the right handling from the gsm411_send_sms() -
such new handling comes in a follow up patch entitled "libmsc: handle
delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report".
This patch includes the migration routines to the new database schema
revision 5, it's quite a bit of dbi boilerplate code - copied-pasted and
adapted.
Change-Id: I7276d356d805a83ebeec72b02c8563b7135ea0b6
If the mobile phone requests a status report via SMS, send a DELIVER_SM
with esm_class = Delivery Receipt to ESME to indicate that the SMS has
been already delivered to its destination.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-DELIVER | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | DELIVER-SM |
| | esm_class = Delivery Receipt |
| |------------------------------->|
| | DELIVER-SM-RESP |
| |<-------------------------------|
| | |
This patch implements "Appendix B. Delivery Receipt Format" as specified
in the SMPP 3.4 specs. This string is conveyed in the SMS message as
data, and it is only meaningful to the ESME, for logging purposes. The
"submit date" and "done date" are not yet set, and other fields are just
sent with dummy values, so they are left to be finished as future work.
The new SMPP TLV tag TLVID_user_message_reference is added to the SMPP
messages inconditionally now since this information is required by
delivery-reports to associate the status-report with the original SMS.
Change-Id: Ic1a9023074bfa938099377980b6aff9b262fab2a
Propagate the status report request field to the SMPP message through
the registered_delivery field, so the ESME knows that the mobile phone
is asking for explicit delivery acknowledgment is required. See SMPP 3.4
specs section 5.2.17.
Change-Id: I59af60fa89cd10ae973c5e122789e3e03e3728ee
Move the sms message-type-identifier (mti) handling away from the
routing logic. This patch allows us to reuse the sms_route_mt_sms()
function in a follow up patch for sms reports send through SMPP
DELIVER_SM with esm_class = Delivery Receipt whose Change-Id is
Ic1a9023074bfa938099377980b6aff9b262fab2a.
Change-Id: I3f3d30e0762b91e2099243b0be1a4b67cbb5e9c0
No need to cache the sms object, just cache what we need into the
smpp_cmd structure. This simplifies what that I introduced in
93ffbd0029 ("libmsc: send RP-ACK to MS after ESME sends SMPP
DELIVER-SM-RESP").
Change-Id: Iba5f864f9bb963baff95969e306b1b7cff00c1e3
The following branch:
if (!rc && !gsms->receiver)
rc = GSM411_RP_CAUSE_MO_NUM_UNASSIGNED;
at the end of sms_route_mt_sms() always evaluates false.
Just a bit before, in such function, we have this:
if (!gsms->receiver) {
...
#ifdef BUILD_SMPP
...
#else
...
#endif
return rc;
}
So, if there is no receiver, we just stop running code and return the RP
cause via the rc variable. Same applies to the smpp_first check under
the BUILD_SMPP ifdef (that I have removed in this snippet to keep this
commit message small).
Change-Id: Ic3502b5b169bc7a73a67fd6ff53d8b6c0dc045c8
A valid subscriber is indespensible when allocating a new
transaction. Return NULL if no subscriber is supplied. This
will cause unidentified subscribers to be rejected.
Note: Under normal conditions, the problem does not occour,
but it is still possible that a misbehaving MS might trigger
the problem by sending a SETUP command before authenticating
the subscriber. (unencrypted networks)
Change-Id: Ia8739b6e329ab02c0064270d02ad1d6ee245520d
TS 04.14 (TS 44.014) specifies a series of commands specific to
conformance testing. Let's add some VTY commands to play (at least
initially) with closing and opening voice loops in the MS.
Change-Id: I38b1ee9dbf26f5689c38cb83b1b3c5e9eaad7678
On incoming 04.08 messages, we log only the protocol discriminator in
decimal. Enhance: log pdisc and message type in hex, and also log the
protocol and message type as human readable string.
Also adjust the msc_vlr tests' log statements for wrapped rx/tx functions
of dtap from/to the MS.
Adjust the expected output of msc_vlr_tests.
Change-Id: Ida205d217e304337d816b14fd15e2ee435e7397d
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7