large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DLMGCP MGCP client: using endpoint domain '@mgw'
2018-03-30 21:04:04 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2019-04-27 21:45:37 +00:00
talloc_total_blocks(tall_bsc_ctx) == 19
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_cm_service_without_lu
2017-01-25 14:04:16 +00:00
- CM Service Request without a prior Location Updating
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
2017-01-25 14:04:16 +00:00
new conn
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msub_fsm{active}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: is child of msub_fsm
DMSC msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_VALIDATE_L3
DMSC dummy_msc_i{0}: Allocated
DMSC dummy_msc_i{0}: is child of msub_fsm
DREF msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: + rx_from_ms: now used by 1 (rx_from_ms)
DBSSAP msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: RAN decode: COMPL_L3
DRLL msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Dispatching 04.08 message: MM GSM48_MT_MM_CM_SERV_REQ
DMM msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_VALIDATE_L3}: Rx CM SERVICE REQUEST cm_service_type=Short-Messaging-Service
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_VALIDATE_L3}: + cm_service_sms: now used by 2 (rx_from_ms,cm_service_sms)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: is child of msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: proc_arq_fsm_done(IMSI_UNKNOWN_IN_VLR)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_DONE}: Process Access Request result: IMSI_UNKNOWN_IN_VLR
- sending CM Service Reject (Short-Messaging-Service) for IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ, cause: IMSI_UNKNOWN_IN_VLR
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_VALIDATE_L3}: Received Event MSC_A_EV_CN_CLOSE
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_RELEASING
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: Releasing: msc_a use is 2 (rx_from_ms,cm_service_sms)
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: Releasing: canceling still pending use: cm_service_sms (1)
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: - cm_service_sms: now used by 1 (rx_from_ms)
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: + wait-Clear-Complete: now used by 2 (rx_from_ms,wait-Clear-Complete)
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: RAN encode: CLEAR_COMMAND on GERAN-A
DMSC dummy_msc_i(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: subscriber not allowed to do a CM Service Request
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: RAN decode error (rc=-5) for COMPL_L3 from MSC-I
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: - rx_from_ms: now used by 1 (wait-Clear-Complete)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
- conn was released
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: RAN decode: CLEAR_COMPLETE
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: - wait-Clear-Complete: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASING}: state_chg to MSC_A_ST_RELEASED
DBSSAP msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASED}: Released: msc_a use is 0 (-)
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ))
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_DONE}: Removing from parent msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ)
DVLR Process_Access_Request_VLR(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){PR_ARQ_S_DONE}: Deferring: will deallocate with msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ)
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASED}: Removing from parent msub_fsm
DREF msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASED}: max total use count was 2
DMSC msub_fsm{active}: Received Event MSUB_EV_ROLE_TERMINATED
DMSC msub(unknown) MSC-A terminated
DMSC msub(unknown) 1 MSC-I still active
DMSC msub_fsm{active}: state_chg to terminating
DMSC msub_fsm{terminating}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_REGULAR, caused by: msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ))
DMSC dummy_msc_i(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){0}: Terminating in cascade, depth 3 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ))
DMSC dummy_msc_i(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){0}: Removing from parent msub_fsm
DMSC dummy_msc_i(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){0}: Deferring: will deallocate with msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ)
DMSC msub(unknown) Free
DMSC msub_fsm{terminating}: Deferring: will deallocate with msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ)
DMSC msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_RELEASED}: Deallocated, including all deferred deallocations
- msub gone
llist_count(&msub_list) == 0
2018-03-01 23:40:58 +00:00
===== test_cm_service_without_lu: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2019-04-27 21:45:37 +00:00
talloc_total_blocks(tall_bsc_ctx) == 19
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_two_lu
2017-01-25 14:04:16 +00:00
- Location Update request causes a GSUP LU request to HLR
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msub_fsm{active}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: is child of msub_fsm
DMSC msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_VALIDATE_L3
DMSC dummy_msc_i{0}: Allocated
DMSC dummy_msc_i{0}: is child of msub_fsm
DREF msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: + rx_from_ms: now used by 1 (rx_from_ms)
DBSSAP msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: RAN decode: COMPL_L3
DRLL msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Dispatching 04.08 message: MM GSM48_MT_MM_LOC_UPD_REQUEST
DMM msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: LOCATION UPDATING REQUEST: MI=IMSI-901700000004620 LU-type=IMSI-ATTACH
DMM msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: USIM: old LAI: 001-868-1
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + mm_rx_loc_upd_req: now used by 2 (rx_from_ms,mm_rx_loc_upd_req)
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + lu: now used by 3 (rx_from_ms,mm_rx_loc_upd_req,lu)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: is child of msc_a(IMSI-901700000004620:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2019-02-19 01:36:35 +00:00
DREF VLR subscr unknown + _lu_fsm_associate_vsub: now used by 1 (_lu_fsm_associate_vsub)
2017-01-25 14:04:16 +00:00
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DREF VLR subscr IMSI-901700000004620 + active-conn: now used by 2 (_lu_fsm_associate_vsub,active-conn)
DMSC msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: Received Event MSC_A_EV_COMPLETE_LAYER_3_OK
DMSC msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_AUTH_CIPH
DREF VLR subscr IMSI-901700000004620 - _lu_fsm_associate_vsub: now used by 1 (active-conn)
2019-05-06 11:09:55 +00:00
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node1_pre()
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f02801020a0101
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - mm_rx_loc_upd_req: now used by 2 (rx_from_ms,lu)
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - rx_from_ms: now used by 1 (lu)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f10a0101
DREF VLR subscr IMSI-901700000004620 + vlr_gsup_rx: now used by 2 (active-conn,vlr_gsup_rx)
2017-01-25 14:04:16 +00:00
DVLR IMSI:901700000004620 has MSISDN:46071
2019-02-19 01:36:35 +00:00
DVLR SUBSCR(IMSI-901700000004620:MSISDN-46071) VLR: update for IMSI=901700000004620 (MSISDN=46071)
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_gsup_rx: now used by 1 (active-conn)
2017-01-25 14:04:16 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- having received subscriber data does not mean acceptance
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
msc_a_is_accepted() == false
2017-01-25 14:04:16 +00:00
requests shall be thwarted
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: CC GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: MM unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: RR GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: SMS SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_gsup_rx: now used by 2 (active-conn,vlr_gsup_rx)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
- sending LU Accept for IMSI-901700000004620:MSISDN-46071:GERAN-A:LU
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + attached: now used by 3 (active-conn,vlr_gsup_rx,attached)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU))
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Deferring: will deallocate with upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Received Event MSC_A_EV_AUTHENTICATED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: state_chg to MSC_A_ST_AUTHENTICATED
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: - lu: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: state_chg to MSC_A_ST_RELEASING
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: Releasing: msc_a use is 0 (-)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + msc_a_fsm_releasing_onenter: now used by 4 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_subscr_cancel_attach_fsm: now used by 5 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter,vlr_subscr_cancel_attach_fsm)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_subscr_cancel_attach_fsm: now used by 4 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: + wait-Clear-Complete: now used by 1 (wait-Clear-Complete)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN encode: CLEAR_COMMAND on GERAN-A
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - msc_a_fsm_releasing_onenter: now used by 3 (active-conn,vlr_gsup_rx,attached)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Deallocated, including all deferred deallocations
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_gsup_rx: now used by 2 (active-conn,attached)
2018-04-01 18:55:54 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN decode: CLEAR_COMPLETE
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: - wait-Clear-Complete: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: state_chg to MSC_A_ST_RELEASED
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Released: msc_a use is 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Removing from parent msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Removing from parent msub_fsm
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: max total use count was 3
DMSC msub_fsm{active}: Received Event MSUB_EV_ROLE_TERMINATED
DMSC msub(IMSI-901700000004620:MSISDN-46071) MSC-A terminated
DMSC msub(IMSI-901700000004620:MSISDN-46071) 1 MSC-I still active
DMSC msub_fsm{active}: state_chg to terminating
DMSC msub_fsm{terminating}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_REGULAR, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Terminating in cascade, depth 3 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Removing from parent msub_fsm
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msub(IMSI-901700000004620:MSISDN-46071) Free
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - active-conn: now used by 1 (attached)
DMSC msub_fsm{terminating}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Deallocated, including all deferred deallocations
- msub gone
llist_count(&msub_list) == 0
2017-01-25 14:04:16 +00:00
- verify that the MS can send another LU request
- Location Update request causes a GSUP LU request to HLR
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msub_fsm{active}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: is child of msub_fsm
DMSC msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_VALIDATE_L3
DMSC dummy_msc_i{0}: Allocated
DMSC dummy_msc_i{0}: is child of msub_fsm
DREF msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: + rx_from_ms: now used by 1 (rx_from_ms)
DBSSAP msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: RAN decode: COMPL_L3
DRLL msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Dispatching 04.08 message: MM GSM48_MT_MM_LOC_UPD_REQUEST
DMM msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: LOCATION UPDATING REQUEST: MI=IMSI-901700000004620 LU-type=IMSI-ATTACH
DMM msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: USIM: old LAI: 001-868-1
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + mm_rx_loc_upd_req: now used by 2 (rx_from_ms,mm_rx_loc_upd_req)
DREF msc_a(IMSI-901700000004620:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + lu: now used by 3 (rx_from_ms,mm_rx_loc_upd_req,lu)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: is child of msc_a(IMSI-901700000004620:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(IMSI-901700000004620:GERAN-A:LU){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2019-02-19 01:36:35 +00:00
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + _lu_fsm_associate_vsub: now used by 2 (attached,_lu_fsm_associate_vsub)
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + active-conn: now used by 3 (attached,_lu_fsm_associate_vsub,active-conn)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: Received Event MSC_A_EV_COMPLETE_LAYER_3_OK
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_AUTH_CIPH
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - _lu_fsm_associate_vsub: now used by 2 (attached,active-conn)
2019-05-06 11:09:55 +00:00
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node1_pre()
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f02801020a0101
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - mm_rx_loc_upd_req: now used by 2 (rx_from_ms,lu)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - rx_from_ms: now used by 1 (lu)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f10a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_gsup_rx: now used by 3 (attached,active-conn,vlr_gsup_rx)
2017-01-25 14:04:16 +00:00
DVLR IMSI:901700000004620 has MSISDN:46071
2019-02-19 01:36:35 +00:00
DVLR SUBSCR(IMSI-901700000004620:MSISDN-46071) VLR: update for IMSI=901700000004620 (MSISDN=46071)
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_gsup_rx: now used by 2 (attached,active-conn)
2017-01-25 14:04:16 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- having received subscriber data does not mean acceptance
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
msc_a_is_accepted() == false
2017-01-25 14:04:16 +00:00
requests shall be thwarted
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: CC GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: MM unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: RR GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: SMS SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_gsup_rx: now used by 3 (attached,active-conn,vlr_gsup_rx)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
- sending LU Accept for IMSI-901700000004620:MSISDN-46071:GERAN-A:LU
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Deferring: will deallocate with upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Received Event MSC_A_EV_AUTHENTICATED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: state_chg to MSC_A_ST_AUTHENTICATED
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: - lu: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: state_chg to MSC_A_ST_RELEASING
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: Releasing: msc_a use is 0 (-)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + msc_a_fsm_releasing_onenter: now used by 4 (attached,active-conn,vlr_gsup_rx,msc_a_fsm_releasing_onenter)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_subscr_cancel_attach_fsm: now used by 5 (attached,active-conn,vlr_gsup_rx,msc_a_fsm_releasing_onenter,vlr_subscr_cancel_attach_fsm)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_subscr_cancel_attach_fsm: now used by 4 (attached,active-conn,vlr_gsup_rx,msc_a_fsm_releasing_onenter)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: + wait-Clear-Complete: now used by 1 (wait-Clear-Complete)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN encode: CLEAR_COMMAND on GERAN-A
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - msc_a_fsm_releasing_onenter: now used by 3 (attached,active-conn,vlr_gsup_rx)
DVLR upd_hlr_vlr_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Deallocated, including all deferred deallocations
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_gsup_rx: now used by 2 (attached,active-conn)
2018-04-01 18:55:54 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN decode: CLEAR_COMPLETE
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: - wait-Clear-Complete: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASING}: state_chg to MSC_A_ST_RELEASED
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Released: msc_a use is 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Removing from parent msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){VLR_ULA_S_DONE}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Removing from parent msub_fsm
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: max total use count was 3
DMSC msub_fsm{active}: Received Event MSUB_EV_ROLE_TERMINATED
DMSC msub(IMSI-901700000004620:MSISDN-46071) MSC-A terminated
DMSC msub(IMSI-901700000004620:MSISDN-46071) 1 MSC-I still active
DMSC msub_fsm{active}: state_chg to terminating
DMSC msub_fsm{terminating}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_REGULAR, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Terminating in cascade, depth 3 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Removing from parent msub_fsm
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){0}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msub(IMSI-901700000004620:MSISDN-46071) Free
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - active-conn: now used by 1 (attached)
DMSC msub_fsm{terminating}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:LU){MSC_A_ST_RELEASED}: Deallocated, including all deferred deallocations
- msub gone
llist_count(&msub_list) == 0
2017-01-25 14:04:16 +00:00
- subscriber detaches
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_IMSI_DETACH_IND
2017-01-25 14:04:16 +00:00
new conn
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msub_fsm{active}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: is child of msub_fsm
DMSC msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_VALIDATE_L3
DMSC dummy_msc_i{0}: Allocated
DMSC dummy_msc_i{0}: is child of msub_fsm
DREF msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: + rx_from_ms: now used by 1 (rx_from_ms)
DBSSAP msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: RAN decode: COMPL_L3
DRLL msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Dispatching 04.08 message: MM GSM48_MT_MM_IMSI_DETACH_IND
2017-01-25 14:04:16 +00:00
DMM IMSI DETACH INDICATION: MI(IMSI)=901700000004620
2019-02-19 01:36:35 +00:00
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + gsm48_rx_mm_imsi_detach_ind: now used by 2 (attached,gsm48_rx_mm_imsi_detach_ind)
2019-01-03 01:32:14 +00:00
DMM IMSI DETACH for IMSI-901700000004620:MSISDN-46071
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + active-conn: now used by 3 (attached,gsm48_rx_mm_imsi_detach_ind,active-conn)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_subscr_cancel_attach_fsm: now used by 4 (attached,gsm48_rx_mm_imsi_detach_ind,active-conn,vlr_subscr_cancel_attach_fsm)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_subscr_cancel_attach_fsm: now used by 3 (attached,gsm48_rx_mm_imsi_detach_ind,active-conn)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - attached: now used by 2 (gsm48_rx_mm_imsi_detach_ind,active-conn)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - gsm48_rx_mm_imsi_detach_ind: now used by 1 (active-conn)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Received Event MSC_A_EV_CN_CLOSE
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_RELEASING
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: Releasing: msc_a use is 1 (rx_from_ms)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + msc_a_fsm_releasing_onenter: now used by 2 (active-conn,msc_a_fsm_releasing_onenter)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 + vlr_subscr_cancel_attach_fsm: now used by 3 (active-conn,msc_a_fsm_releasing_onenter,vlr_subscr_cancel_attach_fsm)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - vlr_subscr_cancel_attach_fsm: now used by 2 (active-conn,msc_a_fsm_releasing_onenter)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: + wait-Clear-Complete: now used by 2 (rx_from_ms,wait-Clear-Complete)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: RAN encode: CLEAR_COMMAND on GERAN-A
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - msc_a_fsm_releasing_onenter: now used by 1 (active-conn)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: - rx_from_ms: now used by 1 (wait-Clear-Complete)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: RAN decode: CLEAR_COMPLETE
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: - wait-Clear-Complete: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASING}: state_chg to MSC_A_ST_RELEASED
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASED}: Released: msc_a use is 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASED}: Removing from parent msub_fsm
DREF msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASED}: max total use count was 2
DMSC msub_fsm{active}: Received Event MSUB_EV_ROLE_TERMINATED
DMSC msub(IMSI-901700000004620:MSISDN-46071) MSC-A terminated
DMSC msub(IMSI-901700000004620:MSISDN-46071) 1 MSC-I still active
DMSC msub_fsm{active}: state_chg to terminating
DMSC msub_fsm{terminating}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_REGULAR, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){0}: Terminating in cascade, depth 3 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){0}: Removing from parent msub_fsm
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){0}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE)
DMSC msub(IMSI-901700000004620:MSISDN-46071) Free
DREF VLR subscr IMSI-901700000004620:MSISDN-46071 - active-conn: now used by 0 (-)
DVLR freeing VLR subscr IMSI-901700000004620:MSISDN-46071 (max total use count was 5)
DMSC msub_fsm{terminating}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:NONE){MSC_A_ST_RELEASED}: Deallocated, including all deferred deallocations
- msub gone
llist_count(&msub_list) == 0
2018-03-01 23:40:58 +00:00
===== test_two_lu: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2019-04-27 21:45:37 +00:00
talloc_total_blocks(tall_bsc_ctx) == 19
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_lu_unknown_tmsi
2017-01-25 14:04:16 +00:00
- Location Update request with unknown TMSI sends ID Request for IMSI
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msub_fsm{active}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: Allocated
DMSC msc_a{MSC_A_ST_VALIDATE_L3}: is child of msub_fsm
DMSC msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_VALIDATE_L3
DMSC dummy_msc_i{0}: Allocated
DMSC dummy_msc_i{0}: is child of msub_fsm
DREF msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: + rx_from_ms: now used by 1 (rx_from_ms)
DBSSAP msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: RAN decode: COMPL_L3
DRLL msc_a(unknown:GERAN-A:NONE){MSC_A_ST_VALIDATE_L3}: Dispatching 04.08 message: MM GSM48_MT_MM_LOC_UPD_REQUEST
DMM msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: LOCATION UPDATING REQUEST: MI=TMSI-0x23422342 LU-type=IMSI-ATTACH
DMM msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: USIM: old LAI: 001-868-1
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + mm_rx_loc_upd_req: now used by 2 (rx_from_ms,mm_rx_loc_upd_req)
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: + lu: now used by 3 (rx_from_ms,mm_rx_loc_upd_req,lu)
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: is child of msc_a(TMSI-0x23422342:GERAN-A:LU)
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2019-02-19 01:36:35 +00:00
DREF VLR subscr unknown + _lu_fsm_associate_vsub: now used by 1 (_lu_fsm_associate_vsub)
2017-01-25 14:04:16 +00:00
DVLR New subscr, TMSI: 0x23422342
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DREF VLR subscr TMSI-0x23422342 + active-conn: now used by 2 (_lu_fsm_associate_vsub,active-conn)
DMSC msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: Received Event MSC_A_EV_COMPLETE_LAYER_3_OK
DMSC msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_VALIDATE_L3}: state_chg to MSC_A_ST_AUTH_CIPH
DREF VLR subscr TMSI-0x23422342 - _lu_fsm_associate_vsub: now used by 1 (active-conn)
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: vlr_loc_upd_want_imsi()
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_IMSI
2019-10-07 19:41:18 +00:00
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Sending DTAP: MM GSM48_MT_MM_ID_REQ
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN encode: DTAP on GERAN-A
2018-12-25 23:40:18 +00:00
- DTAP --GERAN-A--> MS: GSM48_MT_MM_ID_REQ: 051801
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DMSC dummy_msc_i(TMSI-0x23422342:GERAN-A:LU){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - mm_rx_loc_upd_req: now used by 2 (rx_from_ms,lu)
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - rx_from_ms: now used by 1 (lu)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
msc_a_is_accepted() == false
2017-01-25 14:04:16 +00:00
requests shall be thwarted
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: CC GSM48_MT_CC_SETUP
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_CC_SETUP
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: MM unknown 0x33
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: unknown 0x33
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: RR GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: SMS SMS:0x01
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: SMS:0x01
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
2017-01-25 14:04:16 +00:00
- MS tells us the IMSI, causes a GSUP LU request to HLR
2018-12-25 23:40:18 +00:00
MSC <--GERAN-A-- MS: GSM48_MT_MM_ID_RESP
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: + rx_from_ms: now used by 2 (lu,rx_from_ms)
DBSSAP msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: MM GSM48_MT_MM_ID_RESP
2019-01-10 23:04:32 +00:00
DMM IDENTITY RESPONSE: MI=IMSI-901700000004620
2017-01-25 14:04:16 +00:00
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: Received Event VLR_ULA_E_ID_IMSI
2017-01-25 14:04:16 +00:00
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
2019-05-06 11:09:55 +00:00
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: vlr_loc_upd_node1_pre()
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_IMSI}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(TMSI-0x23422342:GERAN-A:LU)
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f02801020a0101
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DREF msc_a(TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: - rx_from_ms: now used by 1 (lu)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f10a0101
DREF VLR subscr IMSI-901700000004620:TMSI-0x23422342 + vlr_gsup_rx: now used by 2 (active-conn,vlr_gsup_rx)
2017-01-25 14:04:16 +00:00
DVLR IMSI:901700000004620 has MSISDN:46071
2019-02-19 01:36:35 +00:00
DVLR SUBSCR(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342) VLR: update for IMSI=901700000004620 (MSISDN=46071)
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 - vlr_gsup_rx: now used by 1 (active-conn)
2017-01-25 14:04:16 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- having received subscriber data does not mean acceptance
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
msc_a_is_accepted() == false
2017-01-25 14:04:16 +00:00
requests shall be thwarted
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: CC GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_CC_SETUP
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: MM unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: unknown 0x33
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: RR GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: GSM48_MT_RR_SYSINFO_1
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode: DTAP
DRLL msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Dispatching 04.08 message: SMS SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Message not permitted for initial conn: SMS:0x01
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: RAN decode error (rc=-13) for DTAP from MSC-I
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f00a0101
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 + vlr_gsup_rx: now used by 2 (active-conn,vlr_gsup_rx)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
- sending LU Accept for IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 + attached: now used by 3 (active-conn,vlr_gsup_rx,attached)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU))
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DVLR lu_compl_vlr_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){LU_COMPL_VLR_S_DONE}: Deferring: will deallocate with upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: Received Event MSC_A_EV_AUTHENTICATED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTH_CIPH}: state_chg to MSC_A_ST_AUTHENTICATED
DREF msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: - lu: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_AUTHENTICATED}: state_chg to MSC_A_ST_RELEASING
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: Releasing: msc_a use is 0 (-)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 + msc_a_fsm_releasing_onenter: now used by 4 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 + vlr_subscr_cancel_attach_fsm: now used by 5 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter,vlr_subscr_cancel_attach_fsm)
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 - vlr_subscr_cancel_attach_fsm: now used by 4 (active-conn,vlr_gsup_rx,attached,msc_a_fsm_releasing_onenter)
DREF msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: + wait-Clear-Complete: now used by 1 (wait-Clear-Complete)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN encode: CLEAR_COMMAND on GERAN-A
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){0}: Received Event MSC_I_EV_FROM_A_FORWARD_ACCESS_SIGNALLING_REQUEST
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 - msc_a_fsm_releasing_onenter: now used by 3 (active-conn,vlr_gsup_rx,attached)
DVLR upd_hlr_vlr_fsm(TMSI-0x23422342:GERAN-A:LU){UPD_HLR_VLR_S_DONE}: Deallocated, including all deferred deallocations
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 - vlr_gsup_rx: now used by 2 (active-conn,attached)
2018-04-01 18:55:54 +00:00
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
large refactoring: support inter-BSC and inter-MSC Handover
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: RAN decode: CLEAR_COMPLETE
DREF msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: - wait-Clear-Complete: now used by 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: Received Event MSC_A_EV_UNUSED
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASING}: state_chg to MSC_A_ST_RELEASED
DBSSAP msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASED}: Released: msc_a use is 0 (-)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_DONE}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU))
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_DONE}: Removing from parent msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){VLR_ULA_S_DONE}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASED}: Removing from parent msub_fsm
DREF msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASED}: max total use count was 3
DMSC msub_fsm{active}: Received Event MSUB_EV_ROLE_TERMINATED
DMSC msub(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342) MSC-A terminated
DMSC msub(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342) 1 MSC-I still active
DMSC msub_fsm{active}: state_chg to terminating
DMSC msub_fsm{terminating}: Terminating in cascade, depth 2 (cause = OSMO_FSM_TERM_REGULAR, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){0}: Terminating in cascade, depth 3 (cause = OSMO_FSM_TERM_PARENT, caused by: msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU))
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){0}: Removing from parent msub_fsm
DMSC dummy_msc_i(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){0}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DMSC msub(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342) Free
DREF VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 - active-conn: now used by 1 (attached)
DMSC msub_fsm{terminating}: Deferring: will deallocate with msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU)
DMSC msc_a(IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342:GERAN-A:LU){MSC_A_ST_RELEASED}: Deallocated, including all deferred deallocations
- msub gone
llist_count(&msub_list) == 0
DVLR freeing VLR subscr IMSI-901700000004620:MSISDN-46071:TMSI-0x23422342 (max total use count was 5)
2018-03-01 23:40:58 +00:00
===== test_lu_unknown_tmsi: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2019-04-27 21:45:37 +00:00
talloc_total_blocks(tall_bsc_ctx) == 19
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2019-04-27 21:45:37 +00:00
talloc_total_blocks(tall_bsc_ctx) == 19
2017-01-25 14:04:16 +00:00