2018-03-06 13:59:00 +00:00
<vtydoc xmlns= 'urn:osmocom:xml:libosmocore:vty:doc:1.0' >
<node id= '_common_cmds_' >
<name > Common Commands</name>
<description > These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
</node>
<node id= 'view' >
<name > view</name>
<command id= 'show version' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'version' doc= 'Displays program version' />
</params>
</command>
<command id= 'show online-help' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'online-help' doc= 'Online help' />
</params>
</command>
<command id= 'enable' >
<params >
<param name= 'enable' doc= 'Turn on privileged mode command' />
</params>
</command>
<command id= 'terminal length <0-512>' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'length' doc= 'Set number of lines on a screen' />
<param name= '<0-512>' doc= 'Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id= 'terminal no length' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'length' doc= 'Set number of lines on a screen' />
</params>
</command>
<command id= 'who' >
<params >
<param name= 'who' doc= 'Display who is on vty' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
<command id= 'show cs7 instance <0-15> users' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'users' doc= 'User Table' />
</params>
</command>
<command id= 'show cs7 (sua|m3ua|ipa) [<0-65534>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'sua' doc= 'SCCP User Adaptation' />
<param name= 'm3ua' doc= 'MTP3 User Adaptation' />
<param name= 'ipa' doc= 'IPA Multiplex (SCCP Lite)' />
<param name= '[<0-65534>]' doc= 'Port Number' />
</params>
</command>
<command id= 'show cs7 instance <0-15> asp' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'asp' doc= 'Application Server Process (ASP)' />
</params>
</command>
<command id= 'show cs7 instance <0-15> as (active|all|m3ua|sua)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'as' doc= 'Application Server (AS)' />
<param name= 'active' doc= 'Display all active ASs' />
<param name= 'all' doc= 'Display all ASs (default)' />
<param name= 'm3ua' doc= 'Display all m3ua ASs' />
<param name= 'sua' doc= 'Display all SUA ASs' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show cs7 instance <0-15> sccp addressbook' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'addressbook' doc= 'List all SCCP addressbook entries' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp users' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'users' doc= 'Show List of SCCP Users registered' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp ssn <0-65535>' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'ssn' doc= 'Find an SCCP User registered for the given SSN' />
<param name= '<0-65535>' doc= 'Subsystem Number (SSN)' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp connections' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'connections' doc= 'Show List of active SCCP connections' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp timers' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signaling Connection Control Part' />
<param name= 'timers' doc= 'Show List of SCCP timers' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'logging enable' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'enable' doc= 'Enables logging to this vty' />
</params>
</command>
<command id= 'logging disable' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'disable' doc= 'Disables logging to this vty' />
</params>
</command>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
<command id= 'logging print category-hex (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category-hex' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem nr in hex ('<000b>')' />
</params>
</command>
<command id= 'logging print level (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'level' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the log level name' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging print file (0|1|basename) [last]' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'file' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the source file and line' />
<param name= 'basename' doc= 'Prefix each log message with the source file's basename (strip leading paths) and line' />
2018-11-05 02:19:12 +00:00
<param name= '[last]' doc= 'Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
2018-03-06 13:59:00 +00:00
</params>
</command>
<command id= 'logging set-log-mask MASK' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'set-log-mask' doc= 'Set the logmask of this logging target' />
<param name= 'MASK' doc= 'List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'vlr' doc= 'Visitor Location Register' />
<param name= 'iucs' doc= 'Iu-CS Protocol' />
<param name= 'bssap' doc= 'BSSAP Protocol (A Interface)' />
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
<param name= 'ljibuf' doc= 'libosmo-netif Jitter Buffer' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level set-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'set-all' doc= 'Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'logging level force-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'no logging level force-all' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Release any globally forced log level set with 'logging level force-all <level>'' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'show logging vty' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'logging' doc= 'Show current logging configuration' />
<param name= 'vty' doc= 'Show current logging configuration for this vty' />
</params>
</command>
<command id= 'show alarms' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'alarms' doc= 'Show current logging configuration' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
<param name= 'tree' doc= 'Display only a specific memory chunk' />
<param name= 'ADDRESS' doc= 'Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
<param name= 'filter' doc= 'Filter chunks using regular expression' />
<param name= 'REGEXP' doc= 'Regular expression' />
</params>
</command>
<command id= 'show stats' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
</params>
</command>
<command id= 'show stats level (global|peer|subscriber)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Show global groups only' />
<param name= 'peer' doc= 'Show global and network peer related groups' />
<param name= 'subscriber' doc= 'Show global, peer, and subscriber groups' />
</params>
</command>
<command id= 'show asciidoc counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'asciidoc' doc= 'Asciidoc generation' />
<param name= 'counters' doc= 'Generate table of all registered counters' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show rate-counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'rate-counters' doc= 'Show all rate counters' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'show fsm NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'NAME' doc= 'Display information about a single named finite state machine' />
</params>
</command>
<command id= 'show fsm all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'all' doc= 'Display a list of all registered finite state machines' />
</params>
</command>
<command id= 'show fsm-instances NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'NAME' doc= 'Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id= 'show fsm-instances all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'all' doc= 'Display a list of all FSM instances of all finite state machine' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show subscriber (msisdn|extension|imsi|tmsi|id) ID' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'show subscriber cache' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Show information about subscribers' />
<param name= 'cache' doc= 'Display contents of subscriber cache' />
</params>
</command>
<command id= 'show connection' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'connection' doc= 'Subscriber Connections' />
</params>
</command>
<command id= 'show transaction' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'transaction' doc= 'Transactions' />
</params>
</command>
<command id= 'sms send pending' >
<params >
<param name= 'sms' doc= 'SMS related commands' />
<param name= 'send' doc= 'SMS Sending related commands' />
<param name= 'pending' doc= 'Send all pending SMS' />
</params>
</command>
<command id= 'sms delete expired' >
<params >
<param name= 'sms' doc= 'SMS related commands' />
<param name= 'delete' doc= 'SMS Database related commands' />
<param name= 'expired' doc= 'Delete all expired SMS' />
</params>
</command>
<command id= 'subscriber create imsi ID' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'create' doc= 'Create new subscriber' />
<param name= 'imsi' doc= 'Identify the subscriber by his IMSI' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-sms' doc= 'Silent SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'start' doc= 'Start silent call' />
<param name= 'any' doc= 'Any channel' />
<param name= 'tch/f' doc= 'TCH/F channel' />
<param name= 'tch/any' doc= 'Any TCH channel' />
<param name= 'sdcch' doc= 'SDCCH channel' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'stop' doc= 'Stop silent call' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ussd-notify' doc= 'Send a USSD notify to the subscriber' />
<param name= '0' doc= 'Alerting Level 0' />
<param name= '1' doc= 'Alerting Level 1' />
<param name= '2' doc= 'Alerting Level 2' />
<param name= '.TEXT' doc= 'Text of USSD message to send' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'close-loop' doc= 'Close a TCH Loop inside the MS' />
<param name= 'a' doc= 'Loop Type A' />
<param name= 'b' doc= 'Loop Type B' />
<param name= 'c' doc= 'Loop Type C' />
<param name= 'd' doc= 'Loop Type D' />
<param name= 'e' doc= 'Loop Type E' />
<param name= 'f' doc= 'Loop Type F' />
<param name= 'i' doc= 'Loop Type I' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'open-loop' doc= 'Open a TCH Loop inside the MS' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID paging' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'paging' doc= 'Issue an empty Paging for the subscriber (for debugging)' />
2018-03-06 13:59:00 +00:00
</params>
</command>
<command id= 'show statistics' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'statistics' doc= 'Display network statistics' />
</params>
</command>
<command id= 'show sms-queue' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'sms-queue' doc= 'Display SMSqueue statistics' />
</params>
</command>
<command id= 'logging filter imsi IMSI' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
</params>
</command>
<command id= 'show smpp esme' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'smpp' doc= 'SMPP Interface' />
<param name= 'esme' doc= 'SMPP Extrenal SMS Entity' />
</params>
</command>
</node>
<node id= 'enable' >
<name > enable</name>
<command id= 'disable' >
<params >
<param name= 'disable' doc= 'Turn off privileged mode command' />
</params>
</command>
<command id= 'configure terminal' >
<params >
<param name= 'configure' doc= 'Configuration from vty interface' />
<param name= 'terminal' doc= 'Configuration terminal' />
</params>
</command>
<command id= 'copy running-config startup-config' >
<params >
<param name= 'copy' doc= 'Copy configuration' />
<param name= 'running-config' doc= 'Copy running config to... ' />
<param name= 'startup-config' doc= 'Copy running config to startup config (same as write file)' />
</params>
</command>
<command id= 'show startup-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'startup-config' doc= 'Contentes of startup configuration' />
</params>
</command>
<command id= 'show version' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'version' doc= 'Displays program version' />
</params>
</command>
<command id= 'show online-help' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'online-help' doc= 'Online help' />
</params>
</command>
<command id= 'terminal length <0-512>' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'length' doc= 'Set number of lines on a screen' />
<param name= '<0-512>' doc= 'Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id= 'terminal no length' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'length' doc= 'Set number of lines on a screen' />
</params>
</command>
<command id= 'who' >
<params >
<param name= 'who' doc= 'Display who is on vty' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
<command id= 'terminal monitor' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'monitor' doc= 'Copy debug output to the current terminal line' />
</params>
</command>
<command id= 'terminal no monitor' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'monitor' doc= 'Copy debug output to the current terminal line' />
</params>
</command>
<command id= 'show cs7 instance <0-15> users' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'users' doc= 'User Table' />
</params>
</command>
<command id= 'show cs7 (sua|m3ua|ipa) [<0-65534>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'sua' doc= 'SCCP User Adaptation' />
<param name= 'm3ua' doc= 'MTP3 User Adaptation' />
<param name= 'ipa' doc= 'IPA Multiplex (SCCP Lite)' />
<param name= '[<0-65534>]' doc= 'Port Number' />
</params>
</command>
<command id= 'show cs7 instance <0-15> asp' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'asp' doc= 'Application Server Process (ASP)' />
</params>
</command>
<command id= 'show cs7 instance <0-15> as (active|all|m3ua|sua)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'as' doc= 'Application Server (AS)' />
<param name= 'active' doc= 'Display all active ASs' />
<param name= 'all' doc= 'Display all ASs (default)' />
<param name= 'm3ua' doc= 'Display all m3ua ASs' />
<param name= 'sua' doc= 'Display all SUA ASs' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show cs7 instance <0-15> sccp addressbook' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'addressbook' doc= 'List all SCCP addressbook entries' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp users' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'users' doc= 'Show List of SCCP Users registered' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp ssn <0-65535>' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'ssn' doc= 'Find an SCCP User registered for the given SSN' />
<param name= '<0-65535>' doc= 'Subsystem Number (SSN)' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp connections' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'connections' doc= 'Show List of active SCCP connections' />
</params>
</command>
<command id= 'show cs7 instance <0-15> sccp timers' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'An instance of the SS7 stack' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
<param name= 'sccp' doc= 'Signaling Connection Control Part' />
<param name= 'timers' doc= 'Show List of SCCP timers' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'logging enable' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'enable' doc= 'Enables logging to this vty' />
</params>
</command>
<command id= 'logging disable' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'disable' doc= 'Disables logging to this vty' />
</params>
</command>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
<command id= 'logging print category-hex (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category-hex' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem nr in hex ('<000b>')' />
</params>
</command>
<command id= 'logging print level (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'level' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the log level name' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging print file (0|1|basename) [last]' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'file' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the source file and line' />
<param name= 'basename' doc= 'Prefix each log message with the source file's basename (strip leading paths) and line' />
2018-11-05 02:19:12 +00:00
<param name= '[last]' doc= 'Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
2018-03-06 13:59:00 +00:00
</params>
</command>
<command id= 'logging set-log-mask MASK' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'set-log-mask' doc= 'Set the logmask of this logging target' />
<param name= 'MASK' doc= 'List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'vlr' doc= 'Visitor Location Register' />
<param name= 'iucs' doc= 'Iu-CS Protocol' />
<param name= 'bssap' doc= 'BSSAP Protocol (A Interface)' />
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
<param name= 'ljibuf' doc= 'libosmo-netif Jitter Buffer' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level set-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'set-all' doc= 'Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'logging level force-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'no logging level force-all' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Release any globally forced log level set with 'logging level force-all <level>'' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'show logging vty' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'logging' doc= 'Show current logging configuration' />
<param name= 'vty' doc= 'Show current logging configuration for this vty' />
</params>
</command>
<command id= 'show alarms' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'alarms' doc= 'Show current logging configuration' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
<param name= 'tree' doc= 'Display only a specific memory chunk' />
<param name= 'ADDRESS' doc= 'Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id= 'show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'talloc-context' doc= 'Show talloc memory hierarchy' />
<param name= 'application' doc= 'Application's context' />
<param name= 'all' doc= 'All contexts, if NULL-context tracking is enabled' />
<param name= 'full' doc= 'Display a full talloc memory hierarchy' />
<param name= 'brief' doc= 'Display a brief talloc memory hierarchy' />
<param name= 'DEPTH' doc= 'Specify required maximal depth value' />
<param name= 'filter' doc= 'Filter chunks using regular expression' />
<param name= 'REGEXP' doc= 'Regular expression' />
</params>
</command>
<command id= 'show stats' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
</params>
</command>
<command id= 'show stats level (global|peer|subscriber)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Show global groups only' />
<param name= 'peer' doc= 'Show global and network peer related groups' />
<param name= 'subscriber' doc= 'Show global, peer, and subscriber groups' />
</params>
</command>
<command id= 'show asciidoc counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'asciidoc' doc= 'Asciidoc generation' />
<param name= 'counters' doc= 'Generate table of all registered counters' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show rate-counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'rate-counters' doc= 'Show all rate counters' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'show fsm NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'NAME' doc= 'Display information about a single named finite state machine' />
</params>
</command>
<command id= 'show fsm all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'all' doc= 'Display a list of all registered finite state machines' />
</params>
</command>
<command id= 'show fsm-instances NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'NAME' doc= 'Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id= 'show fsm-instances all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'all' doc= 'Display a list of all FSM instances of all finite state machine' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'show subscriber (msisdn|extension|imsi|tmsi|id) ID' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'show subscriber cache' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Show information about subscribers' />
<param name= 'cache' doc= 'Display contents of subscriber cache' />
</params>
</command>
<command id= 'show connection' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'connection' doc= 'Subscriber Connections' />
</params>
</command>
<command id= 'show transaction' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'transaction' doc= 'Transactions' />
</params>
</command>
<command id= 'sms send pending' >
<params >
<param name= 'sms' doc= 'SMS related commands' />
<param name= 'send' doc= 'SMS Sending related commands' />
<param name= 'pending' doc= 'Send all pending SMS' />
</params>
</command>
<command id= 'sms delete expired' >
<params >
<param name= 'sms' doc= 'SMS related commands' />
<param name= 'delete' doc= 'SMS Database related commands' />
<param name= 'expired' doc= 'Delete all expired SMS' />
</params>
</command>
<command id= 'subscriber create imsi ID' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'create' doc= 'Create new subscriber' />
<param name= 'imsi' doc= 'Identify the subscriber by his IMSI' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-sms' doc= 'Silent SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'start' doc= 'Start silent call' />
<param name= 'any' doc= 'Any channel' />
<param name= 'tch/f' doc= 'TCH/F channel' />
<param name= 'tch/any' doc= 'Any TCH channel' />
<param name= 'sdcch' doc= 'SDCCH channel' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'stop' doc= 'Stop silent call' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ussd-notify' doc= 'Send a USSD notify to the subscriber' />
<param name= '0' doc= 'Alerting Level 0' />
<param name= '1' doc= 'Alerting Level 1' />
<param name= '2' doc= 'Alerting Level 2' />
<param name= '.TEXT' doc= 'Text of USSD message to send' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'close-loop' doc= 'Close a TCH Loop inside the MS' />
<param name= 'a' doc= 'Loop Type A' />
<param name= 'b' doc= 'Loop Type B' />
<param name= 'c' doc= 'Loop Type C' />
<param name= 'd' doc= 'Loop Type D' />
<param name= 'e' doc= 'Loop Type E' />
<param name= 'f' doc= 'Loop Type F' />
<param name= 'i' doc= 'Loop Type I' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'open-loop' doc= 'Open a TCH Loop inside the MS' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID paging' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'paging' doc= 'Issue an empty Paging for the subscriber (for debugging)' />
2018-03-06 13:59:00 +00:00
</params>
</command>
<command id= 'show statistics' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'statistics' doc= 'Display network statistics' />
</params>
</command>
<command id= 'show sms-queue' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'sms-queue' doc= 'Display SMSqueue statistics' />
</params>
</command>
<command id= 'logging filter imsi IMSI' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID expire' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'expire' doc= 'Expire the subscriber Now' />
</params>
</command>
<command id= 'sms-queue trigger' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'trigger' doc= 'Trigger sending messages' />
</params>
</command>
<command id= 'sms-queue max-pending <1-500>' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'max-pending' doc= 'SMS to deliver in parallel' />
<param name= '<1-500>' doc= 'Amount' />
</params>
</command>
<command id= 'sms-queue clear' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'clear' doc= 'Clear the queue of pending SMS' />
</params>
</command>
<command id= 'sms-queue max-failure <1-500>' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'max-failure' doc= 'Maximum amount of delivery failures' />
<param name= '<1-500>' doc= 'Amount' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'subscriber (msisdn|extension|imsi|tmsi|id) ID sms pending-send' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2018-11-05 02:19:12 +00:00
<param name= 'msisdn' doc= 'Identify subscriber by MSISDN (phone number)' />
<param name= 'extension' doc= 'Legacy alias for 'msisdn'' />
2018-03-06 13:59:00 +00:00
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'pending-send' doc= 'Send pending SMS' />
</params>
</command>
<command id= 'show smpp esme' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'smpp' doc= 'SMPP Interface' />
<param name= 'esme' doc= 'SMPP Extrenal SMS Entity' />
</params>
</command>
</node>
<node id= 'config' >
<name > config</name>
<command id= 'hostname WORD' >
<params >
<param name= 'hostname' doc= 'Set system's network name' />
<param name= 'WORD' doc= 'This system's network name' />
</params>
</command>
<command id= 'no hostname [HOSTNAME]' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'hostname' doc= 'Reset system's network name' />
<param name= '[HOSTNAME]' doc= 'Host name of this router' />
</params>
</command>
<command id= 'password (8|) WORD' >
<params >
<param name= 'password' doc= 'Assign the terminal connection password' />
<param name= '8' doc= 'Specifies a HIDDEN password will follow' />
<param name= '' doc= 'dummy string ' />
<param name= 'WORD' doc= 'The HIDDEN line password string' />
</params>
</command>
<command id= 'password LINE' >
<params >
<param name= 'password' doc= 'Assign the terminal connection password' />
<param name= 'LINE' doc= 'The UNENCRYPTED (cleartext) line password' />
</params>
</command>
<command id= 'enable password (8|) WORD' >
<params >
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
<param name= '8' doc= 'Specifies a HIDDEN password will follow' />
<param name= '' doc= 'dummy string ' />
<param name= 'WORD' doc= 'The HIDDEN 'enable' password string' />
</params>
</command>
<command id= 'enable password LINE' >
<params >
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
<param name= 'LINE' doc= 'The UNENCRYPTED (cleartext) 'enable' password' />
</params>
</command>
<command id= 'no enable password' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
</params>
</command>
<command id= 'banner motd default' >
<params >
<param name= 'banner' doc= 'Set banner string' />
<param name= 'motd' doc= 'Strings for motd' />
<param name= 'default' doc= 'Default string' />
</params>
</command>
<command id= 'banner motd file [FILE]' >
<params >
<param name= 'banner' doc= 'Set banner' />
<param name= 'motd' doc= 'Banner for motd' />
<param name= 'file' doc= 'Banner from a file' />
<param name= '[FILE]' doc= 'Filename' />
</params>
</command>
<command id= 'no banner motd' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'banner' doc= 'Set banner string' />
<param name= 'motd' doc= 'Strings for motd' />
</params>
</command>
<command id= 'service terminal-length <0-512>' >
<params >
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'terminal-length' doc= 'System wide terminal length configuration' />
<param name= '<0-512>' doc= 'Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id= 'no service terminal-length [<0-512>]' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'terminal-length' doc= 'System wide terminal length configuration' />
<param name= '[<0-512>]' doc= 'Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id= 'line vty' >
<params >
<param name= 'line' doc= 'Configure a terminal line' />
<param name= 'vty' doc= 'Virtual terminal' />
</params>
</command>
<command id= 'service advanced-vty' >
<params >
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'advanced-vty' doc= 'Enable advanced mode vty interface' />
</params>
</command>
<command id= 'no service advanced-vty' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'advanced-vty' doc= 'Enable advanced mode vty interface' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
<command id= 'cs7 instance <0-15>' >
<params >
<param name= 'cs7' doc= 'ITU-T Signaling System 7' />
<param name= 'instance' doc= 'Configure a SS7 Instance' />
<param name= '<0-15>' doc= 'An instance of the SS7 stack' />
</params>
</command>
<command id= 'ctrl' >
<params >
<param name= 'ctrl' doc= 'Configure the Control Interface' />
</params>
</command>
<command id= 'log stderr' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'stderr' doc= 'Logging via STDERR of the process' />
</params>
</command>
<command id= 'no log stderr' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'stderr' doc= 'Logging via STDERR of the process' />
</params>
</command>
<command id= 'log file .FILENAME' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'file' doc= 'Logging to text file' />
<param name= '.FILENAME' doc= 'Filename' />
</params>
</command>
<command id= 'no log file .FILENAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'file' doc= 'Logging to text file' />
<param name= '.FILENAME' doc= 'Filename' />
</params>
</command>
<command id= 'log alarms <2-32700>' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'alarms' doc= 'Logging alarms to osmo_strrb' />
<param name= '<2-32700>' doc= 'Maximum number of messages to log' />
</params>
</command>
<command id= 'no log alarms' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'alarms' doc= 'Logging alarms to osmo_strrb' />
</params>
</command>
<command id= 'log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
<param name= 'authpriv' doc= 'Security/authorization messages facility' />
<param name= 'cron' doc= 'Clock daemon (cron/at) facility' />
<param name= 'daemon' doc= 'General system daemon facility' />
<param name= 'ftp' doc= 'Ftp daemon facility' />
<param name= 'lpr' doc= 'Line printer facility' />
<param name= 'mail' doc= 'Mail facility' />
<param name= 'news' doc= 'News facility' />
<param name= 'user' doc= 'Generic facility' />
<param name= 'uucp' doc= 'UUCP facility' />
</params>
</command>
<command id= 'log syslog local <0-7>' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
<param name= 'local' doc= 'Syslog LOCAL facility' />
<param name= '<0-7>' doc= 'Local facility number' />
</params>
</command>
<command id= 'no log syslog' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
</params>
</command>
<command id= 'log gsmtap [HOSTNAME]' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'gsmtap' doc= 'Logging via GSMTAP' />
<param name= '[HOSTNAME]' doc= 'Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
<command id= 'stats reporter statsd' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'statsd' doc= 'Report to a STATSD server' />
</params>
</command>
<command id= 'no stats reporter statsd' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'statsd' doc= 'Report to a STATSD server' />
</params>
</command>
<command id= 'stats reporter log' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'log' doc= 'Report to the logger' />
</params>
</command>
<command id= 'no stats reporter log' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'log' doc= 'Report to the logger' />
</params>
</command>
<command id= 'stats interval <1-65535>' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'interval' doc= 'Set the reporting interval' />
<param name= '<1-65535>' doc= 'Interval in seconds' />
</params>
</command>
<command id= 'network' >
<params >
<param name= 'network' doc= 'Configure the GSM network' />
</params>
</command>
<command id= 'msc' >
<params >
<param name= 'msc' doc= 'Configure MSC options' />
</params>
</command>
<command id= 'mncc-int' >
<params >
<param name= 'mncc-int' doc= 'Configure internal MNCC handler' />
</params>
</command>
<command id= 'hlr' >
<params >
<param name= 'hlr' doc= 'Configure connection to the HLR' />
</params>
</command>
<command id= 'smpp' >
<params >
<param name= 'smpp' doc= 'Configure SMPP SMS Interface' />
</params>
</command>
</node>
<node id= 'config-log' >
<name > config-log</name>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
<command id= 'logging print category-hex (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category-hex' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem nr in hex ('<000b>')' />
</params>
</command>
<command id= 'logging print level (0|1)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'level' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the log level name' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging print file (0|1|basename) [last]' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'file' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with the source file and line' />
<param name= 'basename' doc= 'Prefix each log message with the source file's basename (strip leading paths) and line' />
2018-11-05 02:19:12 +00:00
<param name= '[last]' doc= 'Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
2018-03-06 13:59:00 +00:00
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'vlr' doc= 'Visitor Location Register' />
<param name= 'iucs' doc= 'Iu-CS Protocol' />
<param name= 'bssap' doc= 'BSSAP Protocol (A Interface)' />
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
<param name= 'ljibuf' doc= 'libosmo-netif Jitter Buffer' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'logging level set-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'set-all' doc= 'Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'logging level force-all (debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'no logging level force-all' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'logging' doc= 'Configure logging' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'force-all' doc= 'Release any globally forced log level set with 'logging level force-all <level>'' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'logging filter imsi IMSI' >
<params >
<param name= 'logging' doc= 'Configure logging' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
</params>
</command>
</node>
<node id= 'config-stats' >
<name > config-stats</name>
<command id= 'local-ip ADDR' >
<params >
<param name= 'local-ip' doc= 'Set the IP address to which we bind locally' />
<param name= 'ADDR' doc= 'IP Address' />
</params>
</command>
<command id= 'no local-ip' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'local-ip' doc= 'Set the IP address to which we bind locally' />
</params>
</command>
<command id= 'remote-ip ADDR' >
<params >
<param name= 'remote-ip' doc= 'Set the remote IP address to which we connect' />
<param name= 'ADDR' doc= 'IP Address' />
</params>
</command>
<command id= 'remote-port <1-65535>' >
<params >
<param name= 'remote-port' doc= 'Set the remote port to which we connect' />
<param name= '<1-65535>' doc= 'Remote port number' />
</params>
</command>
<command id= 'mtu <100-65535>' >
<params >
<param name= 'mtu' doc= 'Set the maximum packet size' />
<param name= '<100-65535>' doc= 'Size in byte' />
</params>
</command>
<command id= 'no mtu' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'mtu' doc= 'Set the maximum packet size' />
</params>
</command>
<command id= 'prefix PREFIX' >
<params >
<param name= 'prefix' doc= 'Set the item name prefix' />
<param name= 'PREFIX' doc= 'The prefix string' />
</params>
</command>
<command id= 'no prefix' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'prefix' doc= 'Set the item name prefix' />
</params>
</command>
<command id= 'level (global|peer|subscriber)' >
<params >
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Report global groups only' />
<param name= 'peer' doc= 'Report global and network peer related groups' />
<param name= 'subscriber' doc= 'Report global, peer, and subscriber groups' />
</params>
</command>
<command id= 'enable' >
<params >
<param name= 'enable' doc= 'Enable the reporter' />
</params>
</command>
<command id= 'disable' >
<params >
<param name= 'disable' doc= 'Disable the reporter' />
</params>
</command>
</node>
<node id= 'config-line' >
<name > config-line</name>
<command id= 'login' >
<params >
<param name= 'login' doc= 'Enable password checking' />
</params>
</command>
<command id= 'no login' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'login' doc= 'Enable password checking' />
</params>
</command>
<command id= 'bind A.B.C.D' >
<params >
<param name= 'bind' doc= 'Accept VTY telnet connections on local interface' />
<param name= 'A.B.C.D' doc= 'Local interface IP address (default: 127.0.0.1)' />
</params>
</command>
</node>
<node id= 'config-ctrl' >
<name > config-ctrl</name>
<command id= 'bind A.B.C.D' >
<params >
<param name= 'bind' doc= 'Set bind address to listen for Control connections' />
<param name= 'A.B.C.D' doc= 'Local IP address (default 127.0.0.1)' />
</params>
</command>
</node>
<node id= 'config-cs7' >
<name > config-cs7</name>
<command id= 'description .TEXT' >
<params >
<param name= 'description' doc= 'Save human-readable description of the object' />
<param name= '.TEXT' doc= 'Text until the end of the line' />
</params>
</command>
<command id= 'network-indicator (international | national | reserved | spare)' >
<params >
<param name= 'network-indicator' doc= 'Configure the Network Indicator' />
<param name= 'international' doc= 'International Network' />
<param name= 'national' doc= 'National Network' />
<param name= 'reserved' doc= 'Reserved Network' />
<param name= 'spare' doc= 'Spare Network' />
</params>
</command>
<command id= 'point-code POINT_CODE' >
<params >
<param name= 'point-code' doc= 'Configure the local Point Code' />
<param name= 'POINT_CODE' doc= 'Point Code' />
</params>
</command>
<command id= 'point-code format <1-24> [<1-23>] [<1-22>]' >
<params >
<param name= 'point-code' doc= 'Point Code' />
<param name= 'format' doc= 'Configure Point Code Format' />
<param name= '<1-24>' doc= 'Length of first PC component' />
<param name= '[<1-23>]' doc= 'Length of second PC component' />
<param name= '[<1-22>]' doc= 'Length of third PC component' />
</params>
</command>
<command id= 'point-code format default' >
<params >
<param name= 'point-code' doc= 'Point Code' />
<param name= 'format' doc= 'Configure Point Code Format' />
<param name= 'default' doc= 'Default Point Code Format (3.8.3)' />
</params>
</command>
<command id= 'point-code delimiter (default|dash)' >
<params >
<param name= 'point-code' doc= 'Point Code' />
<param name= 'delimiter' doc= 'Configure Point Code Delimiter' />
<param name= 'default' doc= 'Use dot as delimiter' />
<param name= 'dash' doc= 'User dash as delimiter' />
</params>
</command>
<command id= 'xua rkm routing-key-allocation (static-only|dynamic-permitted)' >
<params >
<param name= 'xua' doc= 'SIGTRAN xxxUA related' />
<param name= 'rkm' doc= 'Routing Key Management' />
<param name= 'routing-key-allocation' doc= 'Routing Key Management Allocation Policy' />
<param name= 'static-only' doc= 'Only static (pre-confgured) Routing Keys permitted' />
<param name= 'dynamic-permitted' doc= 'Dynamically allocate Routing Keys for what ASPs request' />
</params>
</command>
<command id= 'asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)' >
<params >
<param name= 'asp' doc= 'Configure Application Server Process' />
<param name= 'NAME' doc= 'Name of ASP' />
<param name= '<0-65535>' doc= 'Remote SCTP port number' />
<param name= '<0-65535>' doc= 'Local SCTP port number' />
<param name= 'sua' doc= 'SCCP User Adaptation' />
<param name= 'm3ua' doc= 'MTP3 User Adaptation' />
<param name= 'ipa' doc= 'IPA Multiplex (SCCP Lite)' />
</params>
</command>
<command id= 'no asp NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'asp' doc= 'Disable Application Server Process' />
<param name= 'NAME' doc= 'Name of ASP' />
</params>
</command>
<command id= 'as NAME (sua|m3ua|ipa)' >
<params >
<param name= 'as' doc= 'Configure an Application Server' />
<param name= 'NAME' doc= 'Name of the Application Server' />
<param name= 'sua' doc= 'SCCP User Adaptation' />
<param name= 'm3ua' doc= 'MTP3 User Adaptation' />
<param name= 'ipa' doc= 'IPA Multiplex (SCCP Lite)' />
</params>
</command>
<command id= 'no as NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'as' doc= 'Disable Application Server' />
<param name= 'NAME' doc= 'Name of AS' />
</params>
</command>
<command id= 'sccp-address NAME' >
<params >
<param name= 'sccp-address' doc= 'Create/Modify an SCCP addressbook entry' />
<param name= 'NAME' doc= 'Name of the SCCP Address' />
</params>
</command>
<command id= 'no sccp-address NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'sccp-address' doc= 'Delete an SCCP addressbook entry' />
<param name= 'NAME' doc= 'Name of the SCCP Address' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>' >
<params >
<param name= 'sccp-timer' doc= 'Configure SCCP timer values, see ITU-T Q.714' />
<param name= 'conn_est' doc= 'Waiting for connection confirm message, 1 to 2 minutes (default: 60)' />
<param name= 'ias' doc= 'Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' />
<param name= 'iar' doc= 'Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' />
<param name= 'rel' doc= 'Waiting for release complete message, 10 to 20 seconds (default: 10)' />
<param name= 'repeat_rel' doc= 'Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' />
<param name= 'int' doc= 'Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' />
<param name= 'guard' doc= 'Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' />
<param name= 'reset' doc= 'Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' />
<param name= 'reassembly' doc= 'Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' />
<param name= '<1-999999>' doc= 'Timer value, in seconds' />
</params>
</command>
2018-03-06 13:59:00 +00:00
</node>
<node id= 'config-cs7-as' >
<name > config-cs7-as</name>
<command id= 'description .TEXT' >
<params >
<param name= 'description' doc= 'Save human-readable description of the object' />
<param name= '.TEXT' doc= 'Text until the end of the line' />
</params>
</command>
<command id= 'asp NAME' >
<params >
<param name= 'asp' doc= 'Specify that a given ASP is part of this AS' />
<param name= 'NAME' doc= 'Name of ASP to be added to AS' />
</params>
</command>
<command id= 'no asp NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'asp' doc= 'Specify ASP to be removed from this AS' />
<param name= 'NAME' doc= 'Name of ASP to be removed' />
</params>
</command>
<command id= 'traffic-mode (broadcast | loadshare | roundrobin | override)' >
<params >
<param name= 'traffic-mode' doc= 'Specifies traffic mode of operation of the ASP within the AS' />
<param name= 'broadcast' doc= 'Broadcast to all ASP within AS' />
<param name= 'loadshare' doc= 'Share Load among all ASP within AS' />
<param name= 'roundrobin' doc= 'Round-Robin between all ASP within AS' />
<param name= 'override' doc= 'Override' />
</params>
</command>
<command id= 'recovery-timeout <1-2000>' >
<params >
<param name= 'recovery-timeout' doc= 'Specifies the recovery timeout value in milliseconds' />
<param name= '<1-2000>' doc= 'Recovery Timeout in Milliseconds' />
</params>
</command>
<command id= 'qos-class <0-255>' >
<params >
<param name= 'qos-class' doc= 'Specity QoS Class of AS' />
<param name= '<0-255>' doc= 'QoS Class of AS' />
</params>
</command>
<command id= 'routing-key RCONTEXT DPC' >
<params >
<param name= 'routing-key' doc= 'Define a routing key' />
<param name= 'RCONTEXT' doc= 'Routing context number' />
<param name= 'DPC' doc= 'Destination Point Code' />
</params>
</command>
<command id= 'routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)' >
<params >
<param name= 'routing-key' doc= 'Define a routing key' />
<param name= 'RCONTEXT' doc= 'Routing context number' />
<param name= 'DPC' doc= 'Destination Point Code' />
<param name= 'si' doc= 'Match on Service Indicator' />
<param name= 'aal2' doc= 'ATM Adaption Layer 2' />
<param name= 'bicc' doc= 'Bearer Independent Call Control' />
<param name= 'b-isup' doc= 'Broadband ISDN User Part' />
<param name= 'h248' doc= 'H.248' />
<param name= 'isup' doc= 'ISDN User Part' />
<param name= 'sat-isup' doc= 'Sattelite ISDN User Part' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'tup' doc= 'Telephony User Part' />
</params>
</command>
<command id= 'routing-key RCONTEXT DPC ssn SSN' >
<params >
<param name= 'routing-key' doc= 'Define a routing key' />
<param name= 'RCONTEXT' doc= 'Routing context number' />
<param name= 'DPC' doc= 'Destination Point Code' />
<param name= 'ssn' doc= 'Match on Sub-System Number' />
<param name= 'SSN' doc= 'Sub-System Number to match on' />
</params>
</command>
<command id= 'routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN' >
<params >
<param name= 'routing-key' doc= 'Define a routing key' />
<param name= 'RCONTEXT' doc= 'Routing context number' />
<param name= 'DPC' doc= 'Destination Point Code' />
<param name= 'si' doc= 'Match on Service Indicator' />
<param name= 'aal2' doc= 'ATM Adaption Layer 2' />
<param name= 'bicc' doc= 'Bearer Independent Call Control' />
<param name= 'b-isup' doc= 'Broadband ISDN User Part' />
<param name= 'h248' doc= 'H.248' />
<param name= 'isup' doc= 'ISDN User Part' />
<param name= 'sat-isup' doc= 'Sattelite ISDN User Part' />
<param name= 'sccp' doc= 'Signalling Connection Control Part' />
<param name= 'tup' doc= 'Telephony User Part' />
<param name= 'ssn' doc= 'Match on Sub-System Number' />
<param name= 'SSN' doc= 'Sub-System Number to match on' />
</params>
</command>
<command id= 'point-code override dpc PC' >
<params >
<param name= 'point-code' doc= 'Point Code Specific Features' />
<param name= 'override' doc= 'Override (force) a point-code to hard-coded value' />
<param name= 'dpc' doc= 'Override Source Point Code' />
<param name= 'PC' doc= 'Override Destination Point Code' />
</params>
</command>
</node>
<node id= 'config-cs7-asp' >
<name > config-cs7-asp</name>
<command id= 'description .TEXT' >
<params >
<param name= 'description' doc= 'Save human-readable description of the object' />
<param name= '.TEXT' doc= 'Text until the end of the line' />
</params>
</command>
<command id= 'remote-ip A.B.C.D' >
<params >
<param name= 'remote-ip' doc= 'Specify Remote IP Address of ASP' />
<param name= 'A.B.C.D' doc= 'Remote IP Address of ASP' />
</params>
</command>
<command id= 'local-ip A.B.C.D' >
<params >
<param name= 'local-ip' doc= 'Specify Local IP Address from which to contact ASP' />
<param name= 'A.B.C.D' doc= 'Local IP Address from which to contact of ASP' />
</params>
</command>
<command id= 'qos-class <0-255>' >
<params >
<param name= 'qos-class' doc= 'Specify QoS Class of ASP' />
<param name= '<0-255>' doc= 'QoS Class of ASP' />
</params>
</command>
<command id= 'block' >
<params >
<param name= 'block' doc= 'Allows a SCTP Association with ASP, but doesn't let it become active' />
</params>
</command>
<command id= 'shutdown' >
<params >
<param name= 'shutdown' doc= 'Terminates SCTP association; New associations will be rejected' />
</params>
</command>
</node>
<node id= 'config-cs7-sccpaddr' >
<name > config-cs7-sccpaddr</name>
<command id= 'no point-code' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'point-code' doc= 'Remove point-code Number' />
</params>
</command>
<command id= 'no subsystem-number' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'subsystem-number' doc= 'Remove Subsystem Number' />
</params>
</command>
<command id= 'no global-title' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'global-title' doc= 'Remove Global Title' />
</params>
</command>
<command id= 'routing-indicator (GT|PC|IP)' >
<params >
<param name= 'routing-indicator' doc= 'Add Routing Indicator' />
<param name= 'GT' doc= 'by global-title' />
<param name= 'PC' doc= 'by point-code' />
<param name= 'IP' doc= 'by ip-address' />
</params>
</command>
<command id= 'point-code POINT_CODE' >
<params >
<param name= 'point-code' doc= 'Add point-code Number' />
<param name= 'POINT_CODE' doc= 'PC' />
</params>
</command>
<command id= 'subsystem-number <0-4294967295>' >
<params >
<param name= 'subsystem-number' doc= 'Add Subsystem Number' />
<param name= '<0-4294967295>' doc= 'SSN' />
</params>
</command>
<command id= 'global-title' >
<params >
<param name= 'global-title' doc= 'Add/Modify Global Title' />
</params>
</command>
</node>
<node id= 'config-cs7-sccpaddr-gt' >
<name > config-cs7-sccpaddr-gt</name>
<command id= 'global-title-indicator <0-15>' >
<params >
<param name= 'global-title-indicator' doc= 'Set Global Title Indicator' />
<param name= '<0-15>' doc= 'GTI' />
</params>
</command>
<command id= 'translation-type <0-255>' >
<params >
<param name= 'translation-type' doc= 'Set Global Title Translation Type' />
<param name= '<0-255>' doc= 'TT' />
</params>
</command>
<command id= 'numbering-plan-indicator <0-15>' >
<params >
<param name= 'numbering-plan-indicator' doc= 'Set Global Title Numbering Plan Indicator' />
<param name= '<0-15>' doc= 'NPI' />
</params>
</command>
<command id= 'nature-of-address-indicator <0-127>' >
<params >
<param name= 'nature-of-address-indicator' doc= 'Set Global Title Nature of Address Indicator' />
<param name= '<0-127>' doc= 'NAI' />
</params>
</command>
<command id= 'digits DIGITS' >
<params >
<param name= 'digits' doc= 'Set Global Title Digits' />
<param name= 'DIGITS' doc= 'Number digits' />
</params>
</command>
</node>
<node id= 'config-net' >
<name > config-net</name>
<command id= 'network country code <1-999>' >
<params >
<param name= 'network' doc= 'Set the GSM network country code' />
<param name= 'country' doc= 'Country commands' />
<param name= 'code' doc= 'Code commands' />
<param name= '<1-999>' doc= 'Network Country Code to use' />
</params>
</command>
<command id= 'mobile network code <0-999>' >
<params >
<param name= 'mobile' doc= 'Set the GSM mobile network code' />
<param name= 'network' doc= 'Network Commands' />
<param name= 'code' doc= 'Code commands' />
<param name= '<0-999>' doc= 'Mobile Network Code to use' />
</params>
</command>
<command id= 'short name NAME' >
<params >
<param name= 'short' doc= 'Set the short GSM network name' />
<param name= 'name' doc= 'Name Commands' />
<param name= 'NAME' doc= 'Name to use' />
</params>
</command>
<command id= 'long name NAME' >
<params >
<param name= 'long' doc= 'Set the long GSM network name' />
<param name= 'name' doc= 'Name Commands' />
<param name= 'NAME' doc= 'Name to use' />
</params>
</command>
<command id= 'encryption a5 <0-3> [<0-3>] [<0-3>] [<0-3>]' >
<params >
<param name= 'encryption' doc= 'Encryption options' />
<param name= 'a5' doc= 'GSM A5 Air Interface Encryption' />
<param name= '<0-3>' doc= 'A5/n Algorithm Number' />
<param name= '[<0-3>]' doc= 'A5/n Algorithm Number' />
<param name= '[<0-3>]' doc= 'A5/n Algorithm Number' />
<param name= '[<0-3>]' doc= 'A5/n Algorithm Number' />
</params>
</command>
<command id= 'authentication (optional|required)' >
<params >
<param name= 'authentication' doc= 'Whether to enforce MS authentication in 2G' />
<param name= 'optional' doc= 'Allow MS to attach via 2G BSC without authentication' />
<param name= 'required' doc= 'Always do authentication' />
</params>
</command>
<command id= 'rrlp mode (none|ms-based|ms-preferred|ass-preferred)' >
<params >
<param name= 'rrlp' doc= 'Radio Resource Location Protocol' />
<param name= 'mode' doc= 'Set the Radio Resource Location Protocol Mode' />
<param name= 'none' doc= 'Don't send RRLP request' />
<param name= 'ms-based' doc= 'Request MS-based location' />
<param name= 'ms-preferred' doc= 'Request any location, prefer MS-based' />
<param name= 'ass-preferred' doc= 'Request any location, prefer MS-assisted' />
</params>
</command>
<command id= 'mm info (0|1)' >
<params >
<param name= 'mm' doc= 'Mobility Management' />
<param name= 'info' doc= 'Send MM INFO after LOC UPD ACCEPT' />
<param name= '0' doc= 'Disable' />
<param name= '1' doc= 'Enable' />
</params>
</command>
<command id= 'timezone <-19-19> (0|15|30|45)' >
<params >
<param name= 'timezone' doc= 'Set the Timezone Offset of the network' />
<param name= '<-19-19>' doc= 'Timezone offset (hours)' />
<param name= '0' doc= 'Timezone offset (00 minutes)' />
<param name= '15' doc= 'Timezone offset (15 minutes)' />
<param name= '30' doc= 'Timezone offset (30 minutes)' />
<param name= '45' doc= 'Timezone offset (45 minutes)' />
</params>
</command>
<command id= 'timezone <-19-19> (0|15|30|45) <0-2>' >
<params >
<param name= 'timezone' doc= 'Set the Timezone Offset of the network' />
<param name= '<-19-19>' doc= 'Timezone offset (hours)' />
<param name= '0' doc= 'Timezone offset (00 minutes)' />
<param name= '15' doc= 'Timezone offset (15 minutes)' />
<param name= '30' doc= 'Timezone offset (30 minutes)' />
<param name= '45' doc= 'Timezone offset (45 minutes)' />
<param name= '<0-2>' doc= 'DST offset (hours)' />
</params>
</command>
<command id= 'no timezone' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'timezone' doc= 'Disable network timezone override, use system tz' />
</params>
</command>
<command id= 'periodic location update <6-1530>' >
<params >
<param name= 'periodic' doc= 'Periodic Location Updating Interval' />
<param name= 'location' doc= 'Periodic Location Updating Interval' />
<param name= 'update' doc= 'Periodic Location Updating Interval' />
<param name= '<6-1530>' doc= 'Periodic Location Updating Interval in Minutes' />
</params>
</command>
<command id= 'no periodic location update' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'periodic' doc= 'Periodic Location Updating Interval' />
<param name= 'location' doc= 'Periodic Location Updating Interval' />
<param name= 'update' doc= 'Periodic Location Updating Interval' />
</params>
</command>
</node>
<node id= 'config-msc' >
<name > config-msc</name>
<command id= 'assign-tmsi' >
<params >
<param name= 'assign-tmsi' doc= 'Assign TMSI during Location Updating.' />
</params>
</command>
2018-11-05 02:19:12 +00:00
<command id= 'mncc-guard-timeout <0-255>' >
<params >
<param name= 'mncc-guard-timeout' doc= 'Set global guard timer for mncc interface activity' />
<param name= '<0-255>' doc= 'guard timer value (sec.)' />
</params>
</command>
2018-03-06 13:59:00 +00:00
<command id= 'no assign-tmsi' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'assign-tmsi' doc= 'Assign TMSI during Location Updating.' />
</params>
</command>
<command id= 'auth-tuple-max-reuse-count <-1-2147483647>' >
<params >
<param name= 'auth-tuple-max-reuse-count' doc= 'Configure authentication tuple re-use' />
<param name= '<-1-2147483647>' doc= '0 to use each auth tuple at most once (default), >0 to limit re-use, -1 to re-use infinitely (vulnerable!).' />
</params>
</command>
<command id= 'auth-tuple-reuse-on-error (0|1)' >
<params >
<param name= 'auth-tuple-reuse-on-error' doc= 'Configure authentication tuple re-use when HLR is not responsive' />
<param name= '0' doc= '0 = never re-use auth tuples beyond auth-tuple-max-reuse-count (default)' />
<param name= '1' doc= '1 = if the HLR does not deliver new tuples, do re-use already available old ones.' />
</params>
</command>
<command id= 'cs7-instance-a <0-15>' >
<params >
<param name= 'cs7-instance-a' doc= 'Set SS7 to be used by the A-Interface.' />
<param name= '<0-15>' doc= 'SS7 instance reference number' />
</params>
</command>
<command id= 'cs7-instance-iu <0-15>' >
<params >
<param name= 'cs7-instance-iu' doc= 'Set SS7 to be used by the Iu-Interface.' />
<param name= '<0-15>' doc= 'SS7 instance reference number' />
</params>
</command>
<command id= 'paging response-timer (default|<1-65535>)' >
<params >
<param name= 'paging' doc= 'Configure Paging' />
<param name= 'response-timer' doc= 'Set Paging timeout, the minimum time to pass between (unsuccessful) Pagings sent towards BSS or RNC' />
<param name= 'default' doc= 'Set to default timeout (10 seconds)' />
<param name= '<1-65535>' doc= 'Set paging timeout in seconds' />
</params>
</command>
<command id= 'emergency-call route-to-msisdn MSISDN' >
<params >
<param name= 'emergency-call' doc= 'Configure Emergency Call Behaviour' />
<param name= 'route-to-msisdn' doc= 'MSISDN to which Emergency Calls are Dispatched' />
<param name= 'MSISDN' doc= 'MSISDN (E.164 Phone Number)' />
</params>
</command>
<command id= 'mgw local-ip A.B.C.D' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'local-ip' doc= 'local bind to connect to MGW from' />
<param name= 'A.B.C.D' doc= 'local bind IP address' />
</params>
</command>
<command id= 'mgw local-port <0-65535>' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'local-port' doc= 'local port to connect to MGW from' />
<param name= '<0-65535>' doc= 'local bind port' />
</params>
</command>
<command id= 'mgw remote-ip A.B.C.D' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'remote-ip' doc= 'remote IP address to reach the MGW at' />
<param name= 'A.B.C.D' doc= 'remote IP address' />
</params>
</command>
<command id= 'mgw remote-port <0-65535>' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'remote-port' doc= 'remote port to reach the MGW at' />
<param name= '<0-65535>' doc= 'remote port' />
</params>
</command>
<command id= 'mgw endpoint-range <1-65534> <1-65534>' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'endpoint-range' doc= 'usable range of endpoint identifiers' />
<param name= '<1-65534>' doc= 'set first usable endpoint identifier' />
<param name= '<1-65534>' doc= 'set last usable endpoint identifier' />
</params>
</command>
<command id= 'mgw bts-base <0-65534>' >
<params >
<param name= 'mgw' doc= 'Configure MGCP connection to Media Gateway' />
<param name= 'bts-base' doc= 'First UDP port allocated for the BTS side' />
<param name= '<0-65534>' doc= 'UDP Port number' />
</params>
</command>
<command id= 'iu rab-assign-addr-enc (x213|v4raw)' >
<params >
<param name= 'iu' doc= 'Iu interface protocol options' />
<param name= 'rab-assign-addr-enc' doc= 'Choose RAB Assignment's Transport Layer Address encoding' />
<param name= 'x213' doc= 'ITU-T X.213 compliant address encoding (default)' />
<param name= 'v4raw' doc= '32bit length raw IPv4 address (for ip.access nano3G)' />
</params>
</command>
<command id= 'asn1 debug (1|0)' >
<params >
<param name= 'asn1' doc= 'ASN.1 settings' />
<param name= 'debug' doc= 'Enable ASN.1 debug messages' />
<param name= '1' doc= 'Log ASN.1 debug messages to stderr' />
<param name= '0' doc= 'Do not log ASN.1 debug messages to stderr' />
</params>
</command>
<command id= 'asn1 xer-print (1|0)' >
<params >
<param name= 'asn1' doc= 'ASN.1 settings' />
<param name= 'xer-print' doc= 'Log human readable representations of all ASN.1 messages to stderr' />
<param name= '1' doc= 'Log XML representation of all ASN.1 messages to stderr' />
<param name= '0' doc= 'Do not log decoded ASN.1 messages to stderr' />
</params>
</command>
</node>
<node id= 'config-mncc-int' >
<name > config-mncc-int</name>
<command id= 'default-codec tch-f (fr|efr|amr)' >
<params >
<param name= 'default-codec' doc= 'Set default codec' />
<param name= 'tch-f' doc= 'Codec for TCH/F' />
<param name= 'fr' doc= 'Full-Rate' />
<param name= 'efr' doc= 'Enhanced Full-Rate' />
<param name= 'amr' doc= 'Adaptive Multi-Rate' />
</params>
</command>
<command id= 'default-codec tch-h (hr|amr)' >
<params >
<param name= 'default-codec' doc= 'Set default codec' />
<param name= 'tch-h' doc= 'Codec for TCH/H' />
<param name= 'hr' doc= 'Half-Rate' />
<param name= 'amr' doc= 'Adaptive Multi-Rate' />
</params>
</command>
</node>
<node id= 'config-smpp' >
<name > config-smpp</name>
<command id= 'smpp-first' >
<params >
<param name= 'smpp-first' doc= 'Try SMPP routes before the subscriber DB' />
</params>
</command>
<command id= 'no smpp-first' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'smpp-first' doc= 'Try SMPP before routes before the subscriber DB' />
</params>
</command>
<command id= 'local-tcp-port <1-65535>' >
<params >
<param name= 'local-tcp-port' doc= 'Set the local TCP port on which we listen for SMPP' />
<param name= '<1-65535>' doc= 'TCP port number' />
</params>
</command>
<command id= 'local-tcp-ip A.B.C.D <1-65535>' >
<params >
<param name= 'local-tcp-ip' doc= 'Set the local IP address and TCP port on which we listen for SMPP' />
<param name= 'A.B.C.D' doc= 'Local IP address' />
<param name= '<1-65535>' doc= 'TCP port number' />
</params>
</command>
<command id= 'system-id ID' >
<params >
<param name= 'system-id' doc= 'Set the System ID of this SMSC' />
<param name= 'ID' doc= 'Alphanumeric SMSC System ID' />
</params>
</command>
<command id= 'policy (accept-all|closed)' >
<params >
<param name= 'policy' doc= 'Set the authentication policy of this SMSC' />
<param name= 'accept-all' doc= 'Accept all SMPP connections independeint of system ID / passwd' />
<param name= 'closed' doc= 'Accept only SMPP connections from ESMEs explicitly configured' />
</params>
</command>
<command id= 'esme NAME' >
<params >
<param name= 'esme' doc= 'Configure a particular ESME' />
<param name= 'NAME' doc= 'Alphanumeric System ID of the ESME to be configured' />
</params>
</command>
<command id= 'no esme NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'esme' doc= 'Remove ESME configuration' />
<param name= 'NAME' doc= 'Alphanumeric System ID of the ESME to be removed' />
</params>
</command>
</node>
<node id= 'config-smpp-esme' >
<name > config-smpp-esme</name>
<command id= 'password PASSWORD' >
<params >
<param name= 'password' doc= 'Set the password for this ESME' />
<param name= 'PASSWORD' doc= 'Alphanumeric password string' />
</params>
2018-11-05 02:19:12 +00:00
</command> <command id= 'no password' >
2018-03-06 13:59:00 +00:00
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'password' doc= 'Remove the password for this ESME' />
</params>
</command>
<command id= 'route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX' >
<params >
<param name= 'route' doc= 'Configure a route for MO-SMS to be sent to this ESME' />
<param name= 'prefix' doc= 'Prefix-match route' />
<param name= 'unknown' doc= 'Unknown type-of-number' />
<param name= 'international' doc= 'International type-of-number' />
<param name= 'national' doc= 'National type-of-number' />
<param name= 'network' doc= 'Network specific type-of-number' />
<param name= 'subscriber' doc= 'Subscriber type-of-number' />
<param name= 'alpha' doc= 'Alphanumeric type-of-number' />
<param name= 'abbrev' doc= 'Abbreviated type-of-number' />
<param name= 'unknown' doc= 'Unknown numbering plan' />
<param name= 'isdn' doc= 'ISDN (E.164) numbering plan' />
<param name= 'x121' doc= 'X.121 numbering plan' />
<param name= 'f69' doc= 'F.69 numbering plan' />
<param name= 'e212' doc= 'E.212 numbering plan' />
<param name= 'national' doc= 'National numbering plan' />
<param name= 'private' doc= 'Private numbering plan' />
<param name= 'ermes' doc= 'ERMES numbering plan' />
<param name= 'ip' doc= 'IP numbering plan' />
<param name= 'wap' doc= 'WAP numbeing plan' />
<param name= 'PREFIX' doc= 'Destination number prefix' />
</params>
</command>
<command id= 'no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'route' doc= 'Configure a route for MO-SMS to be sent to this ESME' />
<param name= 'prefix' doc= 'Prefix-match route' />
<param name= 'unknown' doc= 'Unknown type-of-number' />
<param name= 'international' doc= 'International type-of-number' />
<param name= 'national' doc= 'National type-of-number' />
<param name= 'network' doc= 'Network specific type-of-number' />
<param name= 'subscriber' doc= 'Subscriber type-of-number' />
<param name= 'alpha' doc= 'Alphanumeric type-of-number' />
<param name= 'abbrev' doc= 'Abbreviated type-of-number' />
<param name= 'unknown' doc= 'Unknown numbering plan' />
<param name= 'isdn' doc= 'ISDN (E.164) numbering plan' />
<param name= 'x121' doc= 'X.121 numbering plan' />
<param name= 'f69' doc= 'F.69 numbering plan' />
<param name= 'e212' doc= 'E.212 numbering plan' />
<param name= 'national' doc= 'National numbering plan' />
<param name= 'private' doc= 'Private numbering plan' />
<param name= 'ermes' doc= 'ERMES numbering plan' />
<param name= 'ip' doc= 'IP numbering plan' />
<param name= 'wap' doc= 'WAP numbeing plan' />
<param name= 'PREFIX' doc= 'Destination number prefix' />
</params>
</command>
<command id= 'default-route' >
<params >
<param name= 'default-route' doc= 'Set this ESME as default-route for all SMS to unknown destinations' />
</params>
</command>
<command id= 'no default-route' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'default-route' doc= 'Remove this ESME as default-route for all SMS to unknown destinations' />
</params>
</command>
<command id= 'deliver-src-imsi' >
<params >
<param name= 'deliver-src-imsi' doc= 'Enable the use of IMSI as source address in DELIVER' />
</params>
</command>
<command id= 'no deliver-src-imsi' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'deliver-src-imsi' doc= 'Disable the use of IMSI as source address in DELIVER' />
</params>
</command>
<command id= 'osmocom-extensions' >
<params >
<param name= 'osmocom-extensions' doc= 'Enable the use of Osmocom SMPP Extensions for this ESME' />
</params>
</command>
<command id= 'no osmocom-extensions' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'osmocom-extensions' doc= 'Disable the use of Osmocom SMPP Extensions for this ESME' />
</params>
</command>
<command id= 'dcs-transparent' >
<params >
<param name= 'dcs-transparent' doc= 'Enable the transparent pass-through of TP-DCS to SMPP DataCoding' />
</params>
</command>
<command id= 'no dcs-transparent' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'dcs-transparent' doc= 'Disable the transparent pass-through of TP-DCS to SMPP DataCoding' />
</params>
</command>
</node>
<node id= 'config-hlr' >
<name > config-hlr</name>
<command id= 'remote-ip A.B.C.D' >
<params >
<param name= 'remote-ip' doc= 'Remote GSUP address of the HLR' />
<param name= 'A.B.C.D' doc= 'Remote GSUP address (default: 127.0.0.1)' />
</params>
</command>
<command id= 'remote-port <1-65535>' >
<params >
<param name= 'remote-port' doc= 'Remote GSUP port of the HLR' />
<param name= '<1-65535>' doc= 'Remote GSUP port (default: MSC_HLR_REMOTE_PORT_DEFAULT)' />
</params>
</command>
</node>
</vtydoc>