osmo-msc/src/libmsc/msc_ifaces.c

424 lines
12 KiB
C
Raw Normal View History

mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
/* Implementation for MSC decisions which interface to send messages out on. */
/* (C) 2016 by sysmocom s.m.f.c GmbH <info@sysmocom.de>
*
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <osmocom/core/logging.h>
#include <openbsc/debug.h>
#include <openbsc/gsm_data.h>
#include <openbsc/msc_ifaces.h>
#include <openbsc/gsm_subscriber.h>
#include <openbsc/transaction.h>
#include <osmocom/legacy_mgcp/mgcp.h>
#include <osmocom/legacy_mgcp/mgcpgw_client.h>
#include <openbsc/vlr.h>
#include <openbsc/a_iface.h>
#include "../../bscconfig.h"
#ifdef BUILD_IU
#include <osmocom/ranap/iu_client.h>
extern struct msgb *ranap_new_msg_rab_assign_voice(uint8_t rab_id,
uint32_t rtp_ip,
uint16_t rtp_port,
bool use_x213_nsap);
#else
#include <openbsc/iu_dummy.h>
#endif /* BUILD_IU */
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
static int msc_tx(struct gsm_subscriber_connection *conn, struct msgb *msg)
{
if (!conn)
return -EINVAL;
if (!msg)
return -EINVAL;
DEBUGP(DMSC, "msc_tx %u bytes to %s via %s\n",
msg->len, vlr_subscr_name(conn->vsub),
ran_type_name(conn->via_ran));
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
switch (conn->via_ran) {
case RAN_GERAN_A:
msg->dst = conn;
return a_iface_tx_dtap(msg);
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
case RAN_UTRAN_IU:
msg->dst = conn->iu.ue_ctx;
return ranap_iu_tx(msg, 0);
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
default:
LOGP(DMSC, LOGL_ERROR,
"msc_tx(): conn->via_ran invalid (%d)\n",
conn->via_ran);
return -1;
}
}
int msc_tx_dtap(struct gsm_subscriber_connection *conn,
struct msgb *msg)
{
return msc_tx(conn, msg);
}
/* 9.2.5 CM service accept */
int msc_gsm48_tx_mm_serv_ack(struct gsm_subscriber_connection *conn)
{
struct msgb *msg;
struct gsm48_hdr *gh;
if (!conn)
return -EINVAL;
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
msg = gsm48_msgb_alloc_name("GSM 04.08 SERV ACC");
gh = (struct gsm48_hdr *) msgb_put(msg, sizeof(*gh));
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
gh->proto_discr = GSM48_PDISC_MM;
gh->msg_type = GSM48_MT_MM_CM_SERV_ACC;
DEBUGP(DMM, "-> CM SERVICE ACCEPT %s\n",
vlr_subscr_name(conn->vsub));
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
return msc_tx_dtap(conn, msg);
}
/* 9.2.6 CM service reject */
int msc_gsm48_tx_mm_serv_rej(struct gsm_subscriber_connection *conn,
enum gsm48_reject_value value)
{
struct msgb *msg;
if (!conn)
return -EINVAL;
conn->received_cm_service_request = false;
mscsplit: various preparations to separate MSC from BSC Disable large parts of the code that depend on BSC presence. The code sections disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of adding the A-interface. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC, this will be done with an external MGCP gateway. Remove LCHAN_MODIFY from internal MNCC state machine. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. Employ fake paging shims in order for msc_vlr_tests to still work. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc gsm_subscriber_connection: put the LAC here, so that it is available without accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of transition: Iu and A will use this new field to pass the LAC around, but in a completely separate OsmoBSC this is not actually needed. It can be removed again from osmo-bsc.git when the time has come. Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall be added in osmo-bsc once the A-Interface code has settled. See OS#2389. Related: OS#1845 OS#2257 OS#2389 Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
2017-05-08 13:12:20 +00:00
msg = gsm48_create_mm_serv_rej(value);
if (!msg) {
LOGP(DMM, LOGL_ERROR, "Failed to allocate CM Service Reject.\n");
return -1;
}
DEBUGP(DMM, "-> CM SERVICE Reject cause: %d\n", value);
return msc_tx_dtap(conn, msg);
}
int msc_tx_common_id(struct gsm_subscriber_connection *conn)
{
if (!conn)
return -EINVAL;
/* Common ID is only sent over IuCS */
if (conn->via_ran != RAN_UTRAN_IU) {
LOGP(DMM, LOGL_INFO,
"%s: Asked to transmit Common ID, but skipping"
" because this is not on UTRAN\n",
vlr_subscr_name(conn->vsub));
return 0;
}
DEBUGP(DIUCS, "%s: tx CommonID %s\n",
vlr_subscr_name(conn->vsub), conn->vsub->imsi);
return ranap_iu_tx_common_id(conn->iu.ue_ctx, conn->vsub->imsi);
}
static int iu_rab_act_cs(struct ranap_ue_conn_ctx *uectx, uint8_t rab_id,
uint32_t rtp_ip, uint16_t rtp_port)
{
#ifdef BUILD_IU
struct msgb *msg;
bool use_x213_nsap;
uint32_t conn_id = uectx->conn_id;
use_x213_nsap = (uectx->rab_assign_addr_enc == RANAP_NSAP_ADDR_ENC_X213);
LOGP(DIUCS, LOGL_DEBUG, "Assigning RAB: conn_id=%u, rab_id=%d,"
" rtp=%x:%u, use_x213_nsap=%d\n", conn_id, rab_id, rtp_ip,
rtp_port, use_x213_nsap);
msg = ranap_new_msg_rab_assign_voice(rab_id, rtp_ip, rtp_port,
use_x213_nsap);
msg->l2h = msg->data;
if (ranap_iu_rab_act(uectx, msg))
LOGP(DIUCS, LOGL_ERROR, "Failed to send RAB Assignment:"
" conn_id=%d rab_id=%d rtp=%x:%u\n",
conn_id, rab_id, rtp_ip, rtp_port);
return 0;
#else
LOGP(DMSC, LOGL_ERROR, "Cannot send Iu RAB Assignment: built without Iu support\n");
return -ENOTSUP;
#endif
}
static void mgcp_response_rab_act_cs_crcx(struct mgcp_response *r, void *priv)
{
struct gsm_trans *trans = priv;
struct gsm_subscriber_connection *conn = trans->conn;
uint32_t rtp_ip;
int rc;
if (r->head.response_code != 200) {
LOGP(DMGCP, LOGL_ERROR,
"MGCPGW response yields error: %d %s\n",
r->head.response_code, r->head.comment);
goto rab_act_cs_error;
}
rc = mgcp_response_parse_params(r);
if (rc) {
LOGP(DMGCP, LOGL_ERROR,
"Cannot parse MGCP response, for %s\n",
vlr_subscr_name(trans->vsub));
goto rab_act_cs_error;
}
conn->rtp.port_cn = r->audio_port;
rtp_ip = mgcpgw_client_remote_addr_n(conn->network->mgcpgw.client);
if (trans->conn->via_ran == RAN_UTRAN_IU) {
/* Assign a voice channel via RANAP on 3G */
if (iu_rab_act_cs(conn->iu.ue_ctx, conn->iu.rab_id, rtp_ip, conn->rtp.port_subscr))
goto rab_act_cs_error;
} else if (trans->conn->via_ran == RAN_GERAN_A) {
/* Assign a voice channel via A on 2G */
if (a_iface_tx_assignment(trans))
goto rab_act_cs_error;
} else
goto rab_act_cs_error;
/* Respond back to MNCC (if requested) */
if (trans->tch_rtp_create) {
if (gsm48_tch_rtp_create(trans))
goto rab_act_cs_error;
}
return;
rab_act_cs_error:
/* FIXME abort call, invalidate conn, ... */
LOGP(DMSC, LOGL_ERROR, "%s: failure during assignment\n",
vlr_subscr_name(trans->vsub));
return;
}
int msc_call_assignment(struct gsm_trans *trans)
{
struct gsm_subscriber_connection *conn;
struct mgcpgw_client *mgcp;
struct msgb *msg;
uint16_t bts_base;
if (!trans)
return -EINVAL;
if (!trans->conn)
return -EINVAL;
conn = trans->conn;
mgcp = conn->network->mgcpgw.client;
#ifdef BUILD_IU
/* FIXME: HACK. where to scope the RAB Id? At the conn / subscriber / ranap_ue_conn_ctx? */
static uint8_t next_iu_rab_id = 1;
if (conn->via_ran == RAN_UTRAN_IU)
conn->iu.rab_id = next_iu_rab_id ++;
#endif
conn->rtp.mgcp_rtp_endpoint =
mgcpgw_client_next_endpoint(conn->network->mgcpgw.client);
/* This will calculate the port we assign to the BTS via AoIP
* assignment command (or rab-assignment on 3G) The BTS will send
* its RTP traffic to that port on the MGCPGW side. The MGCPGW only
* gets the endpoint ID via the CRCX. It will do the same calculation
* on his side too to get knowledge of the rtp port. */
bts_base = mgcpgw_client_conf_actual(mgcp)->bts_base;
conn->rtp.port_subscr = bts_base + 2 * conn->rtp.mgcp_rtp_endpoint;
/* Establish the RTP stream first as looping back to the originator.
* The MDCX will patch through to the counterpart. TODO: play a ring
* tone instead. */
msg = mgcp_msg_crcx(mgcp, conn->rtp.mgcp_rtp_endpoint,
conn->rtp.mgcp_rtp_endpoint, MGCP_CONN_LOOPBACK);
return mgcpgw_client_tx(mgcp, msg, mgcp_response_rab_act_cs_crcx, trans);
}
static void mgcp_response_bridge_mdcx(struct mgcp_response *r, void *priv);
static void mgcp_bridge(struct gsm_trans *from, struct gsm_trans *to,
enum bridge_state state,
enum mgcp_connection_mode mode)
{
struct gsm_subscriber_connection *conn1 = from->conn;
struct gsm_subscriber_connection *conn2 = to->conn;
struct mgcpgw_client *mgcp = conn1->network->mgcpgw.client;
const char *ip;
struct msgb *msg;
OSMO_ASSERT(mgcp);
from->bridge.peer = to;
from->bridge.state = state;
/* Loop back to the same MGCP GW */
ip = mgcpgw_client_remote_addr_str(mgcp);
msg = mgcp_msg_mdcx(mgcp,
conn1->rtp.mgcp_rtp_endpoint,
ip, conn2->rtp.port_cn,
mode);
if (mgcpgw_client_tx(mgcp, msg, mgcp_response_bridge_mdcx, from))
LOGP(DMGCP, LOGL_ERROR,
"Failed to send MDCX message for %s\n",
vlr_subscr_name(from->vsub));
}
static void mgcp_response_bridge_mdcx(struct mgcp_response *r, void *priv)
{
struct gsm_trans *trans = priv;
struct gsm_trans *peer = trans->bridge.peer;
switch (trans->bridge.state) {
case BRIDGE_STATE_LOOPBACK_PENDING:
trans->bridge.state = BRIDGE_STATE_LOOPBACK_ESTABLISHED;
switch (peer->bridge.state) {
case BRIDGE_STATE_LOOPBACK_PENDING:
/* Wait until the other is done as well. */
return;
case BRIDGE_STATE_LOOPBACK_ESTABLISHED:
/* Now that both are in loopback, switch both to
* forwarding. */
mgcp_bridge(trans, peer, BRIDGE_STATE_BRIDGE_PENDING,
MGCP_CONN_RECV_SEND);
mgcp_bridge(peer, trans, BRIDGE_STATE_BRIDGE_PENDING,
MGCP_CONN_RECV_SEND);
break;
default:
LOGP(DMGCP, LOGL_ERROR,
"Unexpected bridge state: %d for %s\n",
trans->bridge.state, vlr_subscr_name(trans->vsub));
break;
}
break;
case BRIDGE_STATE_BRIDGE_PENDING:
trans->bridge.state = BRIDGE_STATE_BRIDGE_ESTABLISHED;
break;
default:
LOGP(DMGCP, LOGL_ERROR,
"Unexpected bridge state: %d for %s\n",
trans->bridge.state, vlr_subscr_name(trans->vsub));
break;
}
}
int msc_call_connect(struct gsm_trans *trans, uint16_t port, uint32_t ip)
{
/* With this function we inform the MGCP-GW where (ip/port) it
* has to send its outgoing voic traffic. The receiving end will
* usually be a PBX (e.g. Asterisk). The IP-Address we tell, will
* not only be used to direct the traffic, it will also be used
* as a filter to make sure only RTP packets from the right
* remote end will reach the BSS. This is also the reason why
* inbound audio will not work until this step is performed */
/* NOTE: This function is used when msc_call_bridge(), is not
* applicable. This is usually the case when an external MNCC
* is in use */
struct gsm_subscriber_connection *conn;
struct mgcpgw_client *mgcp;
struct msgb *msg;
if (!trans)
return -EINVAL;
if (!trans->conn)
return -EINVAL;
if (!trans->conn->network)
return -EINVAL;
if (!trans->conn->network->mgcpgw.client)
return -EINVAL;
mgcp = trans->conn->network->mgcpgw.client;
struct in_addr ip_addr;
ip_addr.s_addr = ntohl(ip);
conn = trans->conn;
msg = mgcp_msg_mdcx(mgcp,
conn->rtp.mgcp_rtp_endpoint,
inet_ntoa(ip_addr), port, MGCP_CONN_RECV_SEND);
if (mgcpgw_client_tx(mgcp, msg, NULL, trans))
LOGP(DMGCP, LOGL_ERROR,
"Failed to send MDCX message for %s\n",
vlr_subscr_name(trans->vsub));
return 0;
}
int msc_call_bridge(struct gsm_trans *trans1, struct gsm_trans *trans2)
{
if (!trans1)
return -EINVAL;
if (!trans2)
return -EINVAL;
/* First setup as loopback and configure the counterparts' endpoints,
* so that when transmission starts the originating addresses are
* already known to be valid. The mgcp callback will continue. */
mgcp_bridge(trans1, trans2, BRIDGE_STATE_LOOPBACK_PENDING,
MGCP_CONN_LOOPBACK);
mgcp_bridge(trans2, trans1, BRIDGE_STATE_LOOPBACK_PENDING,
MGCP_CONN_LOOPBACK);
return 0;
}
void msc_call_release(struct gsm_trans *trans)
{
struct msgb *msg;
struct gsm_subscriber_connection *conn;
struct mgcpgw_client *mgcp;
if (!trans)
return;
if (!trans->conn)
return;
if (!trans->conn->network)
return;
conn = trans->conn;
mgcp = conn->network->mgcpgw.client;
/* Send DLCX */
msg = mgcp_msg_dlcx(mgcp, conn->rtp.mgcp_rtp_endpoint,
conn->rtp.mgcp_rtp_endpoint);
if (mgcpgw_client_tx(mgcp, msg, NULL, NULL))
LOGP(DMGCP, LOGL_ERROR,
"Failed to send DLCX message for %s\n",
vlr_subscr_name(trans->vsub));
/* Release endpoint id */
mgcpgw_client_release_endpoint(conn->rtp.mgcp_rtp_endpoint, mgcp);
}