2018-03-30 21:04:04 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 12
2018-03-01 23:40:58 +00:00
===== test_reject_2nd_conn
2017-01-25 14:04:16 +00:00
- Location Update Request on one connection
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- Another Location Update Request from the same subscriber on another connection is rejected
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: A Location Updating process is already pending for this subscriber. Aborting.
2017-01-25 14:04:16 +00:00
- sending LU Reject for unknown, cause 22
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_CN_CLOSE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + release == 2 (0x101: compl_l3,release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
- BSSAP Clear --RAN_GERAN_A--> MS
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
DRR 901700000004620: internal error during Location Updating attempt
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use - compl_l3 == 1 (0x100: release)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
lu_result_sent == 2
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL Freeing subscriber connection with NULL subscriber
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
---
- The first connection can still complete its LU
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_2nd_conn: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_lu
2017-01-25 14:04:16 +00:00
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- Another Location Update Request from the same subscriber on the same conn is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use + dtap == 1 (0x2: dtap)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Cannot accept another LU, conn already busy establishing authenticity; extraneous LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - dtap == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- The first LU can still complete
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_lu: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_cm_during_lu
2017-01-25 14:04:16 +00:00
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- A CM Service Request in the middle of a LU is rejected
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use + dtap == 1 (0x2: dtap)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Cannot accept CM Service Request, conn already busy establishing authenticity
2018-04-06 00:57:51 +00:00
DMM -> CM SERVICE Reject cause: 22
2016-05-20 19:59:55 +00:00
DMSC msc_tx 3 bytes to IMSI:901700000004620 via RAN_GERAN_A
2018-04-06 00:57:51 +00:00
- DTAP --RAN_GERAN_A--> MS: GSM48_MT_MM_CM_SERV_REJ: 052216
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - dtap == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
cm_service_result_sent == 0
2018-04-02 20:46:55 +00:00
dtap_tx_confirmed == 1
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
---
- The first LU can still complete
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_cm_during_lu: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_lu
2017-01-25 14:04:16 +00:00
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- An erratic Paging Response is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use + dtap == 1 (0x2: dtap)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Ignoring Paging Response, conn already busy establishing authenticity
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - dtap == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- The first LU can still complete
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_lu: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_cm
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- Subscriber does a normal CM Service Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2017-01-25 14:04:16 +00:00
- sending CM Service Accept for MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + cm_service == 2 (0x9: compl_l3,cm_service)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: still awaiting first request after a CM Service Request
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
cm_service_result_sent == 1
msc_subscr_conn_is_accepted() == true
- A LU request on an open conn is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Cannot accept another LU, conn already established; extraneous LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
---
- subscriber detaches
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_IMSI_DETACH_IND
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_IMSI_DETACH_IND (0x5:0x1)
2017-01-25 14:04:16 +00:00
DMM IMSI DETACH INDICATION: MI(IMSI)=901700000004620
DREF VLR subscr MSISDN:46071 usage increases to: 3
DMM IMSI DETACH for MSISDN:46071
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_CN_CLOSE
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 3 (0x10a: dtap,cm_service,release)
DREF MSISDN:46071: MSC conn use - cm_service == 2 (0x102: dtap,release)
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-06 00:57:51 +00:00
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x100: release)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 0
DREF freeing VLR subscr MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_cm: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_cm_during_cm
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- Subscriber does a normal CM Service Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2017-01-25 14:04:16 +00:00
- sending CM Service Accept for MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + cm_service == 2 (0x9: compl_l3,cm_service)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: still awaiting first request after a CM Service Request
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
cm_service_result_sent == 1
msc_subscr_conn_is_accepted() == true
- A second CM Service Request on the same conn is accepted without another auth dance
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
DMM MSISDN:46071: re-using already accepted connection
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Updated ID
2017-01-25 14:04:16 +00:00
- sending CM Service Accept for MSISDN:46071
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
cm_service_result_sent == 1
llist_count(&net->subscr_conns) == 1
---
- subscriber detaches
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_IMSI_DETACH_IND
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_IMSI_DETACH_IND (0x5:0x1)
2017-01-25 14:04:16 +00:00
DMM IMSI DETACH INDICATION: MI(IMSI)=901700000004620
DREF VLR subscr MSISDN:46071 usage increases to: 3
DMM IMSI DETACH for MSISDN:46071
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_CN_CLOSE
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 3 (0x10a: dtap,cm_service,release)
DREF MSISDN:46071: MSC conn use - cm_service == 2 (0x102: dtap,release)
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-06 00:57:51 +00:00
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x100: release)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 0
DREF freeing VLR subscr MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
2018-03-01 23:40:58 +00:00
===== test_reject_cm_during_cm: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_cm
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- Subscriber does a normal CM Service Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2017-01-25 14:04:16 +00:00
- sending CM Service Accept for MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + cm_service == 2 (0x9: compl_l3,cm_service)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: still awaiting first request after a CM Service Request
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
cm_service_result_sent == 1
msc_subscr_conn_is_accepted() == true
---
- An erratic Paging Response on the same conn is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Ignoring Paging Response, conn already established
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
---
- The original CM Service Request can conclude
2018-06-15 16:57:30 +00:00
- Concluding CM Service Request
DREF MSISDN:46071: MSC conn use - cm_service == 0 (0x0: )
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
- all requests serviced, conn has been released
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(CM_SERVICE_REQ:901700000004620)
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(CM_SERVICE_REQ:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(CM_SERVICE_REQ:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_cm: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_paging_resp
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- an SMS is sent, MS is paged
DREF VLR subscr MSISDN:46071 usage increases to: 2
llist_count(&vsub->cs.requests) == 0
DREF VLR subscr MSISDN:46071 usage increases to: 3
2016-05-20 19:59:55 +00:00
DMM Subscriber MSISDN:46071 not paged yet, start paging.
2017-11-22 01:55:52 +00:00
RAN_GERAN_A sends out paging request to IMSI 901700000004620, TMSI 0xffffffff, LAC 23
2016-05-20 19:59:55 +00:00
strcmp(paging_expecting_imsi, imsi) == 0
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
llist_count(&vsub->cs.requests) == 1
DREF VLR subscr MSISDN:46071 usage decreases to: 3
paging_sent == 1
paging_stopped == 0
- MS replies with Paging Response, we deliver the SMS
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
2017-01-25 14:04:16 +00:00
DRR PAGING RESPONSE: MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage increases to: 5
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2016-05-20 19:59:55 +00:00
DPAG Paging success for MSISDN:46071 (event=0)
DPAG Calling paging cbfn.
2018-03-12 22:59:37 +00:00
DCC (ti 00 sub MSISDN:46071 callref 40000001) New transaction
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 6
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + trans_sms == 2 (0x21: compl_l3,trans_sms)
2016-05-20 19:59:55 +00:00
DMSC msc_tx 91 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x01: 09015801000791447758100650004c0005806470f1000007101000000000445079da1e1ee7416937485e9ea7c965373d1d6683c270383b3d0ed3d36ff71c949e83c22072799e9687c5ec32a81d96afcbf4b4fb0c7ac3e9e9b7db05
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 5
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: connection still has active transaction: SMS
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 4
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
dtap_tx_confirmed == 1
paging_stopped == 1
- conn is still open to wait for SMS ack dance
llist_count(&net->subscr_conns) == 1
---
- MS sends erratic LU Request, which is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Cannot accept another LU, conn already established; extraneous LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- MS replies with CP-ACK for received SMS
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x04
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x04 (0x9:0x4)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMMUNICATING
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_COMMUNICATING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
- MS also sends RP-ACK, MSC in turn sends CP-ACK for that
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x01
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x01 (0x9:0x1)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_COMMUNICATING
2016-05-20 19:59:55 +00:00
DMSC msc_tx 2 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x04: 0904
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - trans_sms == 1 (0x2: dtap)
DREF MSISDN:46071: MSC conn use - dtap == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
dtap_tx_confirmed == 1
bssap_clear_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
- SMS is done
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_lu_during_paging_resp: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_accept_cm_during_paging_resp
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- an SMS is sent, MS is paged
DREF VLR subscr MSISDN:46071 usage increases to: 2
llist_count(&vsub->cs.requests) == 0
DREF VLR subscr MSISDN:46071 usage increases to: 3
2016-05-20 19:59:55 +00:00
DMM Subscriber MSISDN:46071 not paged yet, start paging.
2017-11-22 01:55:52 +00:00
RAN_GERAN_A sends out paging request to IMSI 901700000004620, TMSI 0xffffffff, LAC 23
2016-05-20 19:59:55 +00:00
strcmp(paging_expecting_imsi, imsi) == 0
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
llist_count(&vsub->cs.requests) == 1
DREF VLR subscr MSISDN:46071 usage decreases to: 3
paging_sent == 1
paging_stopped == 0
- MS replies with Paging Response, we deliver the SMS
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
2017-01-25 14:04:16 +00:00
DRR PAGING RESPONSE: MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage increases to: 5
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2016-05-20 19:59:55 +00:00
DPAG Paging success for MSISDN:46071 (event=0)
DPAG Calling paging cbfn.
2018-03-12 22:59:37 +00:00
DCC (ti 00 sub MSISDN:46071 callref 40000002) New transaction
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 6
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + trans_sms == 2 (0x21: compl_l3,trans_sms)
2016-05-20 19:59:55 +00:00
DMSC msc_tx 91 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x01: 09015801000791447758100650004c0005806470f1000007101000000000445079da1e1ee7416937485e9ea7c965373d1d6683c270383b3d0ed3d36ff71c949e83c22072799e9687c5ec32a81d96afcbf4b4fb0c7ac3e9e9b7db05
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 5
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: connection still has active transaction: SMS
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 4
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
dtap_tx_confirmed == 1
paging_stopped == 1
- conn is still open to wait for SMS ack dance
llist_count(&net->subscr_conns) == 1
---
- CM Service Request during open connection is accepted
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_CM_SERV_REQ
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_CM_SERV_REQ (0x5:0x24)
2017-01-25 14:04:16 +00:00
DMM <- CM SERVICE REQUEST serv_type=0x08 MI(IMSI)=901700000004620
DMM MSISDN:46071: re-using already accepted connection
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + cm_service == 3 (0x2a: dtap,cm_service,trans_sms)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Updated ID
2017-01-25 14:04:16 +00:00
- sending CM Service Accept for MSISDN:46071
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 2 (0x28: cm_service,trans_sms)
2017-01-25 14:04:16 +00:00
cm_service_result_sent == 1
llist_count(&net->subscr_conns) == 1
g_conn->received_cm_service_request == 1
- MS replies with CP-ACK for received SMS
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x04
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 3 (0x2a: dtap,cm_service,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x04 (0x9:0x4)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMMUNICATING
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_COMMUNICATING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 2 (0x28: cm_service,trans_sms)
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
- MS also sends RP-ACK, MSC in turn sends CP-ACK for that
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x01
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 3 (0x2a: dtap,cm_service,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x01 (0x9:0x1)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_COMMUNICATING
2016-05-20 19:59:55 +00:00
DMSC msc_tx 2 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x04: 0904
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - trans_sms == 2 (0xa: dtap,cm_service)
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x8: cm_service)
2017-01-25 14:04:16 +00:00
dtap_tx_confirmed == 1
- SMS is done
llist_count(&net->subscr_conns) == 1
---
- subscriber detaches
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_IMSI_DETACH_IND
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0xa: dtap,cm_service)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_IMSI_DETACH_IND (0x5:0x1)
2017-01-25 14:04:16 +00:00
DMM IMSI DETACH INDICATION: MI(IMSI)=901700000004620
DREF VLR subscr MSISDN:46071 usage increases to: 3
DMM IMSI DETACH for MSISDN:46071
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_CN_CLOSE
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 3 (0x10a: dtap,cm_service,release)
DREF MSISDN:46071: MSC conn use - cm_service == 2 (0x102: dtap,release)
2018-04-06 00:57:51 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 2
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-06 00:57:51 +00:00
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x100: release)
2018-04-01 18:55:54 +00:00
bssap_clear_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 0
DREF freeing VLR subscr MSISDN:46071
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
2018-03-01 23:40:58 +00:00
===== test_accept_cm_during_paging_resp: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_paging_resp
2017-01-25 14:04:16 +00:00
---
- Subscriber does a normal LU
- Location Update Request
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_MM_LOC_UPD_REQUEST (0x5:0x8)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
2017-01-25 14:04:16 +00:00
DMM LOCATION UPDATING REQUEST: MI(IMSI)=901700000004620 type=IMSI ATTACH
2017-11-22 01:55:52 +00:00
DMM LU/new-LAC: 1/23
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Allocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: is child of Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: rev=GSM net=GERAN (no Auth)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: Received Event VLR_ULA_E_UPDATE_LA
2017-01-25 14:04:16 +00:00
DREF VLR subscr unknown usage increases to: 1
DVLR set IMSI on subscriber; IMSI=901700000004620 id=901700000004620
DVLR New subscr, IMSI: 901700000004620
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
2017-07-18 13:39:27 +00:00
DREF VLR subscr IMSI:901700000004620 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node1()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_auth()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_post_ciph()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: vlr_loc_upd_node_4()
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_IDLE}: state_chg to VLR_ULA_S_WAIT_HLR_UPD
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Allocated
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: Received Event UPD_HLR_VLR_E_START
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 04010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_UPDATE_LOCATION_REQUEST: 04010809710000004026f0
2018-04-02 21:17:50 +00:00
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_INIT}: state_chg to UPD_HLR_VLR_S_WAIT_FOR_DATA
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_AUTH_CIPH
2018-04-09 18:44:56 +00:00
DREF IMSI:901700000004620: MSC conn use - compl_l3 == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Awaiting results for Auth+Ciph, overruling event SUBSCR_CONN_E_UNUSED
2017-01-25 14:04:16 +00:00
lu_result_sent == 0
llist_count(&net->subscr_conns) == 1
- HLR sends _INSERT_DATA_REQUEST, VLR responds with _INSERT_DATA_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: 10010809710000004026f00804036470f1
DVLR GSUP rx 17: 10010809710000004026f00804036470f1
DREF VLR subscr IMSI:901700000004620 usage increases to: 2
DVLR IMSI:901700000004620 has MSISDN:46071
2017-12-27 12:23:44 +00:00
DVLR SUBSCR(MSISDN:46071) VLR: update for IMSI=901700000004620 (MSISDN=46071, used=2)
2017-01-25 14:04:16 +00:00
DVLR GSUP tx: 12010809710000004026f0
GSUP --> HLR: OSMO_GSUP_MSGT_INSERT_DATA_RESULT: 12010809710000004026f0
DREF VLR subscr MSISDN:46071 usage decreases to: 1
<-- GSUP rx OSMO_GSUP_MSGT_INSERT_DATA_REQUEST: vlr_gsupc_read_cb() returns 0
lu_result_sent == 0
- HLR also sends GSUP _UPDATE_LOCATION_RESULT
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: 06010809710000004026f0
DVLR GSUP rx 11: 06010809710000004026f0
DREF VLR subscr MSISDN:46071 usage increases to: 2
2018-04-02 21:17:50 +00:00
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_HLR_LU_RES
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: Received Event UPD_HLR_VLR_E_UPD_LOC_ACK
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_WAIT_FOR_DATA}: state_chg to UPD_HLR_VLR_S_DONE
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Freeing instance
DVLR upd_hlr_vlr_fsm(LU:901700000004620){UPD_HLR_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: Received Event VLR_ULA_E_UPD_HLR_COMPL
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_HLR_UPD}: state_chg to VLR_ULA_S_WAIT_LU_COMPL
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Allocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: is child of vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: Received Event LU_COMPL_VLR_E_START
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_INIT}: state_chg to LU_COMPL_VLR_S_WAIT_SUB_PRES
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Allocated
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: is child of lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: Received Event SUB_PRES_VLR_E_START
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_INIT}: state_chg to SUB_PRES_VLR_S_DONE
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Removing from parent lu_compl_vlr_fsm(LU:901700000004620)
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Freeing instance
DVLR sub_pres_vlr_fsm(LU:901700000004620){SUB_PRES_VLR_S_DONE}: Deallocated
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: Received Event LU_COMPL_VLR_E_SUB_PRES_COMPL
2017-01-25 14:04:16 +00:00
- sending LU Accept for MSISDN:46071
DREF VLR subscr MSISDN:46071 usage increases to: 3
2018-04-02 21:17:50 +00:00
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_WAIT_SUB_PRES}: state_chg to LU_COMPL_VLR_S_DONE
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: Received Event VLR_ULA_E_LU_COMPL_SUCCESS
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Removing from parent vlr_lu_fsm(LU:901700000004620)
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Freeing instance
DVLR lu_compl_vlr_fsm(LU:901700000004620){LU_COMPL_VLR_S_DONE}: Deallocated
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_WAIT_LU_COMPL}: state_chg to VLR_ULA_S_DONE
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: Received Event SUBSCR_CONN_E_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_AUTH_CIPH}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage decreases to: 3
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 2
<-- GSUP rx OSMO_GSUP_MSGT_UPDATE_LOCATION_RESULT: vlr_gsupc_read_cb() returns 0
bssap_clear_sent == 1
- LU was successful, and the conn has already been closed
lu_result_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Removing from parent Subscr_Conn(LU:901700000004620)
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: fsm_lu_cleanup called with cause OSMO_FSM_TERM_PARENT
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Freeing instance
DVLR vlr_lu_fsm(LU:901700000004620){VLR_ULA_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
2018-04-01 18:55:54 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(LU:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 0
---
- an SMS is sent, MS is paged
DREF VLR subscr MSISDN:46071 usage increases to: 2
llist_count(&vsub->cs.requests) == 0
DREF VLR subscr MSISDN:46071 usage increases to: 3
2016-05-20 19:59:55 +00:00
DMM Subscriber MSISDN:46071 not paged yet, start paging.
2017-11-22 01:55:52 +00:00
RAN_GERAN_A sends out paging request to IMSI 901700000004620, TMSI 0xffffffff, LAC 23
2016-05-20 19:59:55 +00:00
strcmp(paging_expecting_imsi, imsi) == 0
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
llist_count(&vsub->cs.requests) == 1
DREF VLR subscr MSISDN:46071 usage decreases to: 3
paging_sent == 1
paging_stopped == 0
- MS replies with Paging Response, we deliver the SMS
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2017-01-25 14:04:16 +00:00
new conn
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Subscr_Conn{SUBSCR_CONN_S_NEW}: Allocated
2018-04-09 18:44:56 +00:00
DREF unknown: MSC conn use + compl_l3 == 1 (0x1: compl_l3)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
2017-01-25 14:04:16 +00:00
DRR PAGING RESPONSE: MI(IMSI)=901700000004620
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Updated ID
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Allocated
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: is child of Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: rev=GSM net=GERAN (no Auth)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: Received Event PR_ARQ_E_START
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 4
DREF VLR subscr MSISDN:46071 usage increases to: 5
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_vlr_fn_post_imsi()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_ciph()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_node2_post_vlr()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_pres()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_trace()
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: _proc_arq_vlr_post_imei()
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: proc_arq_fsm_done(PASSED)
2018-04-02 21:17:50 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_INIT}: state_chg to PR_ARQ_S_DONE
2018-04-06 00:57:51 +00:00
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Process Access Request result: PASSED
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: Received Event SUBSCR_CONN_E_ACCEPTED
2016-05-20 19:59:55 +00:00
DPAG Paging success for MSISDN:46071 (event=0)
DPAG Calling paging cbfn.
2018-03-12 22:59:37 +00:00
DCC (ti 00 sub MSISDN:46071 callref 40000003) New transaction
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 6
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + trans_sms == 2 (0x21: compl_l3,trans_sms)
2016-05-20 19:59:55 +00:00
DMSC msc_tx 91 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x01: 09015801000791447758100650004c0005806470f1000007101000000000445079da1e1ee7416937485e9ea7c965373d1d6683c270383b3d0ed3d36ff71c949e83c22072799e9687c5ec32a81d96afcbf4b4fb0c7ac3e9e9b7db05
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 5
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_NEW}: state_chg to SUBSCR_CONN_S_ACCEPTED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: subscr_conn_fsm_has_active_transactions: connection still has active transaction: SMS
2017-01-25 14:04:16 +00:00
DREF VLR subscr MSISDN:46071 usage decreases to: 4
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMPLETE_LAYER_3
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - compl_l3 == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
dtap_tx_confirmed == 1
paging_stopped == 1
- conn is still open to wait for SMS ack dance
llist_count(&net->subscr_conns) == 1
---
- MS sends another erratic Paging Response which is dropped silently
2017-03-10 01:15:20 +00:00
MSC <--RAN_GERAN_A-- MS: GSM48_MT_RR_PAG_RESP
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2017-03-10 01:15:20 +00:00
DRLL Dispatching 04.08 message GSM48_MT_RR_PAG_RESP (0x6:0x27)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DMM Ignoring Paging Response, conn already established
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
- MS replies with CP-ACK for received SMS
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x04
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x04 (0x9:0x4)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: Received Event SUBSCR_CONN_E_COMMUNICATING
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_ACCEPTED}: state_chg to SUBSCR_CONN_S_COMMUNICATING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - dtap == 1 (0x20: trans_sms)
2017-01-25 14:04:16 +00:00
llist_count(&net->subscr_conns) == 1
- MS also sends RP-ACK, MSC in turn sends CP-ACK for that
2018-01-24 21:53:00 +00:00
MSC <--RAN_GERAN_A-- MS: SMS:0x01
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + dtap == 2 (0x22: dtap,trans_sms)
2018-01-24 21:53:00 +00:00
DRLL Dispatching 04.08 message SMS:0x01 (0x9:0x1)
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_COMMUNICATING
2016-05-20 19:59:55 +00:00
DMSC msc_tx 2 bytes to MSISDN:46071 via RAN_GERAN_A
2018-01-24 21:53:00 +00:00
- DTAP --RAN_GERAN_A--> MS: SMS:0x04: 0904
2017-01-25 14:04:16 +00:00
- DTAP matches expected message
DREF VLR subscr MSISDN:46071 usage decreases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - trans_sms == 1 (0x2: dtap)
DREF MSISDN:46071: MSC conn use - dtap == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_COMMUNICATING}: state_chg to SUBSCR_CONN_S_RELEASING
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use + release == 1 (0x100: release)
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DREF VLR subscr MSISDN:46071 usage increases to: 3
DREF VLR subscr MSISDN:46071 usage decreases to: 2
- BSSAP Clear --RAN_GERAN_A--> MS
2018-04-01 18:55:54 +00:00
dtap_tx_confirmed == 1
bssap_clear_sent == 1
- BSS sends BSSMAP Clear Complete
2018-04-09 18:44:56 +00:00
DREF MSISDN:46071: MSC conn use - release == 0 (0x0: )
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: Received Event SUBSCR_CONN_E_UNUSED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASING}: state_chg to SUBSCR_CONN_S_RELEASED
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Terminating (cause = OSMO_FSM_TERM_PARENT)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Removing from parent Subscr_Conn(PAGING_RESP:901700000004620)
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Freeing instance
DVLR Process_Access_Request_VLR(PAGING_RESP:901700000004620){PR_ARQ_S_DONE}: Deallocated
refactor subscr_conn and subscr_conn_fsm de-/alloc
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
2018-03-30 22:02:14 +00:00
DRLL MSISDN:46071: Freeing subscriber connection
DREF VLR subscr MSISDN:46071 usage decreases to: 1
2018-04-02 21:17:50 +00:00
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Freeing instance
DMM Subscr_Conn(PAGING_RESP:901700000004620){SUBSCR_CONN_S_RELEASED}: Deallocated
2017-01-25 14:04:16 +00:00
- SMS is done
llist_count(&net->subscr_conns) == 0
DREF freeing VLR subscr MSISDN:46071
2018-03-01 23:40:58 +00:00
===== test_reject_paging_resp_during_paging_resp: SUCCESS
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
2018-03-30 21:04:04 +00:00
talloc_total_blocks(tall_bsc_ctx) == 12
2017-01-25 14:04:16 +00:00