We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
In change I55605ea083565b6950d0820e3f72c50c9dc19ffa, the default
number of endpoints was increased to 512, however the
configuration examples were not updated.
Change-Id: I449a612065a5208c9f70ae74f594e8d45eb344cf
Related: OS#4711, SYS#5262
In this example, we are using the first span (0) of the first DAHDI card
and use it as 'trunk 1' in the MGW.
Change-Id: I0a97da5163a94379b327403b1258696855836bad
The example config bind the MGW to a random ip-address, lets use the
loopback address here, this will suit cases where osmo-bts runs on the
same machine as the MGW (nitb). For all other cases were an external BTS
is used the ip-address still needs to be changed.
Change-Id: Iae52c671c48953ea6b52b18c5d77347343cde0df
Leave the old osmo-bsc_mgcp and libosmo-legacy-mgcp as it is; on a copy thereof
(added by a previous commit), apply changes to initially implement the new
osmo-mgw.
Adjust build system and debian packaging to accomodate the new libosmo-mgcp and
osmo-mgw.
The main differences:
*) use a list to manage rtp connections.
Aggregate all rtp related information inside a single struct.
Use a linked list to manage the both connections (net and bts).
The idea behind using a list is that we might support conference
calls at some later point.
Store the linked list in struct mgcp_endpoint, have a private linked
list for each endpoint. The list contains connection items which are
implemented in struct mgcp_conn. A connection is allocated and freed
using the functions in mgcp_conn.c. A connection is allocated on the
reception of a CRCX command and freed with the reception of a DLCX
command.
*) remove external transcoder feature
Fortunatelly the external transcoder feature is not needed
anymore. This patch removes the related code.
*) vty: get rid of CONN_BTS and CONN_NET
Since the new connection model does not make a difference
between BTS and NET connections the VTY should not use
the fixed CONN_BTS and CONN_NET constants.
- Handle the conns list inside the endpoint directly
- introduce function to dump basic rtp connection info
- introduce human readable names for connections
Parts of the code adjusted to use generalized connections instead of explicit
BTS/NET ones:
- teach mgcp_send_dummy() to send dummy packets to any RTP connection
- network: generalize mgcp_bind_net/bts_rtp_port()
- network: generalize mgcp_send()
- tap: generalize call tapping feature
- stat: generalize statistics
- Replace rtp_data_net() and rtp_data_bts() with generalized rtp_data_rx()
*) mgcp_protocol.c fixes:
- check ci string before it is converted:
In case of missing ci, a nullpointer is delivered to strtoul().
Add a function that takes ci, checks it and converts it to an
uint32_t. Use the return code to react on missing ci.
- output error message on missing CI.
- when parsing the mode, print log message when mode is missing.
- use mode_orig when mode is missing.
- fix ptime formatstring to use %u rather than %d.
- cosmetic: log when connection is deleted on DLCX.
- change loglevels of CRCX, MDCX, DLCX events from DEBUG to NOTICE.
*) mgcp_test
- apply rename of strline_r() to mgcp_strline().
- MGCP command macros:
- Add 'I: 1' parameters.
- Use proper port numbers:
from m=audio 0 RTP/AVP 126
to m=audio 16002 RTP/AVP 128
- Change ptime to 'a=ptime:40' because this is what the MGW currently
returns. CRCX generally feed a ptime:40 and this is expected to be
returned.
- struct mgcp_test: Use only one ptype, there are no explicit BTS and NET
endpoints anymore.
Hence remove one column from tests[].
- test_messages():
- Enable: remove '#if 0'
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway.
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_retransmission():
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_packet_error_detection():
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- remove endpoint init, now done internally.
- add false assert in error case.
- Assert that a conn really vanishes on DLCX, previously the conn would
remain and just be unused, now it is actually discarded.
- test_no_cycle()
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- test_no_name()
- Enable: remove '#if 0'.
- remove endpoint init, now done internally.
- add false assert in error case.
- mgcp_test.ok: adjust expected results to status quo:
- We now see two dummy packets instead of one, now sent to both sides because
we don't know of BTS or NET side. (maybe drop dummy packets later...)
- packet duration, conn mode: now sane defaults show instead of unset.
- various whitespace and formatting changes from lindent.
Change-Id: Ie008599136c7ed8a0dfbb0cf803188975a499fc5
This a cosmetic commit, copying libosmo-legacy-mgcp to libosmo-mgcp and
osmo-bsc_mgcp to osmo-mgw 1:1 at first, to provide a basis for next patches
that highlight the changes from legacy to new code.
Until osmo-msc and osmo-bsc are adjusted to operate with the new code, we will
keep the legacy code alongside the new code. The legacy code might be dropped
later.
Change-Id: Idf54481754a1765bdb2d0d7033bc0d7dc2018024
Use one space to indent mgcp.cfg, like all the other osmo*.cfg examples.
Tweak the header comment.
Remove the password and line vty commands.
Change-Id: I52e481dbf4778dd187ce6b67d879a04ef61e8b47
These either remain from openbsc.git or slipped in while applying recent
patches from openbsc.git and do not belong in osmo-mgw.
The ctrl_test_runner.py from openbsc.git still sticks around, but osmo-bsc_mgcp
has no CTRL interface (yet). If it gets one, we can re-add the
ctrl_test_runner.
Change-Id: I623ba8c053bef91a327e58de214e05f0d6768605
In SGSN, actually place the port in the SGSN config by default, so that the
gsup port may now be omitted in the VTY config (the IP address suffices).
Adjust the osmo-sgsn.cfg example.
Depends: I4222e21686c823985be8ff1f16b1182be8ad6175 (libosmocore)
Change-Id: I50f2040e2eb0baacb43849e93cfed10cbc2fc156
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
A number of the GSM timers (including T3109) had no reasonable
default values if not specified in the VTY / config file. Together
with unconditional writing to the config file, this created
config files with a persistent setting for important timers as '0'.
To make things worse, many of our example cofig files suffered from the
same problem.
Let's avoid this from happening by
* having reasonable defaults if nothing specified in the config file
* conditionally savingg timers only if they differ from default
* reject any timer values that state zero during start-up (see previous
commit)
Change-Id: Iaac0bfca423852b61d8b9eb1438157ef00d0d8c8
Closes: OS#2380
For the vty tests, add osmo-sgsn-accept-all.cfg (that does not need an HLR) and
use in vty_test_runner.py, otherwise the 'show sgsn' command will reply that it
could not connect to the HLR, failing the vty test which expects empty.
Change-Id: Ie3b2013198d3e2b780a4e31c36b89b58129dcacd
This helps in providing 3G software packages for the sysmoNITB hardware, which
uses 10.23.24.1 for SGSN and 10.23.24.2 for GGSN.
However, in order to not break the python tests, the osmo-sgsn.cfg example
still uses 127.0.0.1 as local address.
Change the GGSN address to 127.0.0.2, because SGSN and GGSN cannot co-exist on
the same address (the GTP port number is fixed by spec: no IE to communicate a
differing port, so it has to be the standard GTP port for both).
Change-Id: Ie3a25f6771ed6e620cb2b315638c622a9a24e530
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
- bscs.config needed by the vty tests was not picked up as a dist file, because
its suffix is not 'cfg'. Rename to *.cfg. Apply this rename in
vty_test_runner.py and osmo-bsc_nat.cfg.
- Remove restart counters after external tests, otherwise distcheck complains
about uncleaned files.
- Add contrib/ipa.py to EXTRA_DIST, hence add a Makefile.am to contrib/.
Otherwise the python tests cannot find that dependency.
Change-Id: I42b55cb1125099afc3a8e3f87c0e398426b2e2a9
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Harald Welte
Vadim Yanitskiy
Philipp Maier
Pau Espin
Neels Hofmeyr
Neels Hofmeyr
Daniel Willmann