It is not a good idea to use a personal write_config function for the
MGW node, since it's not meant to be a 1st level (top) node.
During write-config the node function will be called at an
implementation specific time (based on the order defined by the app in
the node type enum), so there's no real way to control that the output
of the MGW node will end up under the parent configured in
mgcp_client_pool_vty_init(). As mentioned the order can be tweaked based
on how the node enums are configured, installed, etc. but that's really
a nightmare, so let's better not rely on that.
Therefore, this patch introduces a new API which the users (apps such as
OsmoBSc and OsmoMSC) can use to write the config at the required time
(when writing its own parent node).
A hack is introduced internally to detect older versions of the users
which didn't call this function to still print stuff (up to to the app
if the order is correct).
Related: SYS#5987
Change-Id: I7a620cf47886d8ecab30ce369cf123d98ab842c5
This will be used by osmo-bsc to implement MGW-pinning for specific BTS.
This is useful for instance to keep all BTS connections targeting the
same MGW in order to make use of Osmux trunking optimizations (AMR
payload of different calls filling same underlaying UDP packet).
Related: SYS#5987
Change-Id: I75ce3e04cd3f6d9cc20d7b4fc0f51083780786c8
This way we don't need to worry about implementation details (struct
size) in the future in case they change (they will).
Related: OS#5987
Requires: libosmo-netif.git Change-Id Ie8df581f375c9a183a7af60b431561bda82f6e34
Change-Id: I2d0d8c152b8f1234ddfcd74d6cb04b1818b41510
The initially merged IuUP API and implementation in libosmocore assumed
that RFCI with ID was always in the position of its ID inside the list
of RFCIs. This was the case for messages sent by ip.access nano3g as well
as our own osmocom implementation. However it was noticed that other nodes
from other vendors actually use other order, as allowed by the IuUP message
format.
Hence, we need to break the assumption and provide explicit ID
information in the list.
NOTICE: This commit implies an API change when using libosmogsm.
However, the previous API was never available in any libosmogsm release,
and only available in both libosmogsm and osmo-mgw master, so we are
only breaking compatibility between different master versions, which is
acceptable.
Related: SYS#5969
Depends: libosmocore.git Change-Id Ib21cee2e30bf83dff4e167f79541796007af9845
Change-Id: I40ebf36ad37f5196751caf2297a340e538ad28bc
Depending on the usecase of osmo_mpcg_client it may be helpful to send a
DLCX to certain endpoints. Usually this would be a wildcarded endpoint
that resets the entire trunk to drop lingering RTP flows which may still
present after a restart/crash, but it might be also a group of specific
endpoints. The user may specify an arbitrary amount of endpoints where
the mgcp client will send a DLCX to. It does not matter if the endpoints
are wildcarded or not.
Change-Id: I47e7ff858d5067b46d52329be5f362ff61c0dff8
Related: SYS#5535
We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
I wanted to use gerrit to merge v1 of
I8d58281e1ff898638293c9e8cb000329462c7a70, but gerrit merged v2
nevertheless :(
Change-Id: I7b16912e66e91f0c30716e4ea1181b39906bacc1
struct mgcp_config contains a function pointer realloc_cb, which is
never popoulated nor used anywhere in the code. Lets remove it
Change-Id: I8d58281e1ff898638293c9e8cb000329462c7a70
RFC3267 specifies two framing modes for AMR packets. An octet aligned
mode is specified where all fields of the AMR packets are aligned to
octet boundaries. The second framing mode is the bandwith efficient mode
where the fields are directly packed one after another.
- add paring/generation functions for related SDP fmtp parameters
- add conversion function to convert AMR payload
Depends: libosmo-netif I5b5a0fa644d8dbb1f04f9d7e35312683c7b3d196
Change-Id: I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Related: OS#3807
Remove public API that makes no sense anymore and is dead code.
I see the dropped API as a dead-end initial misconception of the early mgcp
client, and it doesn't really make sense to drag this stuff along. It has not
been used by osmo-msc,-bsc for a long time now, and just confuses the reader.
It is public API, yes, and older versions of osmo-msc / osmo-bsc will not be
able to compile against this, but even if it did, the resulting MGCP client
would not work with the current osmo-mgw: this API is still based on the
premise that the MGCP client dictates the MGW endpoint numbers, a concept that
cannot be used with the current osmo-mgw. Instead, osmo-mgw expects a
wildcarded endpoint upon CRCX and assigns its own endpoint names.
Also, the bts-base configuration is unused and a legacy of when osmo-bsc_mgcp
had explicit BTS and CN sides.
Change-Id: I98a9f1f17a1c4ab20cea3b08c7d21663592134d6
The MGCP connection identifier is allocated by the MGW while processing
the CRCX, see RFC3435 2.1.3.2:. Including/Accepting a connection
identifier in CRCX is "forbidden" as per RFC3435 Section 3.2.2.
So the MGW side must *reject* a CRCX message with 'I' parameter, and
allocate a connection identifier which is subsequently returned in the
response.
Closes: OS#2648
Change-Id: Iab6a6038e7610c62f34e642cd49c93d11151252c
The MGCP spec in RFC3435 is quite clear: Connection Identifiers are
hexadecimal strings of up to 32 characters. We should not print and
parse them as integers on either client or server.
Change the internal uint32_t representation of connection identifiers
to a string representation in the client and also in the server.
Closes: OS#2649
Change-Id: I0531a1b670d00cec50078423a2868207135b2436
Let's track the API/ABI changes in libosmo*mgcp the same way we do it in
other libosmo* libraries.
Change-Id: Id0b8d55ea58bdb3d72b4c131ac983d8895b55ef8