The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
New define is available since libosmocore 1.1.0, and we already require
1.1.0, so no need to update dependenices.
Let's change it to avoid people re-using old BSC_FD_* symbols when
copy-pasting somewhere else.
Change-Id: I9b6463af713f76c06a144bdbf202c0d91eef4d21
That MGCP_DUMMY_LOAD is an old hack prior to Osmux spec update, and it's
not nice since it cannot be 100% distinguished from a usual AMR ft
frame.
Let's use the correct DUMMY ft type and build it according spec. Allow
handling differently the old format for a while until we are sure no old
implementations (like bsc-nat) exist sending that kind of message.
Change-Id: Ib17d20b87b28aade49ba60519b56a96e694819af
Remove old BTS/NET no longer in use and meaningless. Use new osmo-mgw
APIs to inject payload RTP<->Osmux on the correct socket and conn.
Change-Id: I60b6ba3ffdc74efff945ba13a0b736798bdf5d8c
Previously the local one was used but nobody cared because probably
everybody was using default 1984 on different IP addresses.
Change-Id: I01e590465fa247185d74103578681e9041249099
We also update code to allow setting up RTP related fields to succeed
during CRCX. We also update code to allow setting up RTP related fields to
succeed during CRCX.
Change-Id: Ia6e723d9a28ba38fc3382a4fb35ea6e5bab30c09
osmux_xfrm_input_open_circuit returns 0 on success and -1 on error.
Confusion comes from that function being implemented by calling
osmux_batch_add_circuit which returns NULL on error.
cherry-picked from: openbsc.git ac1b03c8e59408336d07527e2597171cb99ed654.
Change-Id: Iba018aa57901642ea4c486526a973fe6023e10cf
* Cleanup naming to make it far more clear
* Drop 2 variables holding CID values (allocated_cid, cid), in favour of
1 value holdinf the value and one bool stating whether the value is
used.
* Change conn_osmux_allocate_cid to allow allocating either next
available CID or a specific one, in preparation for forthcoming patches.
This commit can be merged straight away because anyway osmux cannot be
enabled in current status (blocked by vty config) and
(conn_)osmux_allocate_cid was/is not called anywhere. However, it helps
improving code base for future re-introduction of Osmux as it is
envisioned.
Change-Id: I737a248ac6c74add8e917fe2e2f36779d0f1d685
* Refactor code to have unified checks on all paths activating Osmux.
* Improve checkings at activation time and add logging.
* Code now enforces endp osmux status to be enabled before processing
the frame through endp->osmux.out. Before, a delayed or bad pkt could
arrive and be processed by an endp with osmux not enabled, using
endp->osmux.out that was not initialized and ended up crashing:
libosmo-netif/src/osmux.c:281:3: runtime error: member access within null pointer of type 'struct msgb'
This could also happen if a BSC started sending or we received (non legacy dummy) osmux
frames before we received the BSC CRCX ACK agreeing on osmux negotiation
and switching to ACTIVATING state.
Related: SYS#4350
Port from openbsc 4a2cc9eb0a0f9424c16b26fcb757483a39d67482.
Includes fixup from openbsc I438349bffaa46a10ad8983090a4b17aed7e00d82.
Change-Id: Iac11e447ec0d76e4e74ec982a6e3f63b35548978
State ACTIVATING is set once negotiation between the 2 parts went
successfuly.
Port from openbsc 96bd7b075a59eb051079152241b127ca944b0781.
Change-Id: Ic56eda1251be41369d869e687a1cf955df2c6d61
Prior to this commit, the check was only done on legacy dummy frames.
Port from openbsc a42d4584fd01c9cd1021fab609bdaaafe859c13a.
Change-Id: I5b6606d72a9f5ae593a8e3ab5fbbe7e1e5a0ae11
Otherwise we end up in a weird state where we have timers set up but
osmux is still flagged as not enabled.
Cherry-picked from openbsc cad739d2386640a68c24e3d470ddacdcaf377561.
Change-Id: I0a334842463d311bc80a980e60fb702a0a9ad610
Since that define is already used to allocate size of osmux_cid_bitmap,
let's use it here too instead of hardcoding its value.
Change-Id: Ib2e4febee8bc6bcc035ad0a65c5c1eb94ef5e6fb
Right now it's not a big issue since OSMUX_CID_MAX is 255, so 255+1 is
256 which fits array boundaries correctly (multiple of 8). However, if
for example OSMUX_CID_MAX was modified to be 12, 12+1/8 = 1, so we'd
have an undesired memory access when accessing last 4 CIDs.
A +1 should be kept on top, because OSMUX_CID_MAX specified the maximum
number used by a CID, that is (0,OSMUX_CID_MAX), and as a result we
require OSMUX_CID_MAX+1 slots.
Change-Id: Iaf9b93712dbd2a862b01e70dd8e11893bfa6b24c
In struct mgcp_rtp_end one finds unsigned int counters. Those should
be replaced with libosmocore rate counters
- replace packets_rx, octets_rx, packets_tx, octets_tx and
dropped_packets with libosmocore rate counters.
Change-Id: I47c5c9006df5044e59ddebb895e62adb849d72d5
Related: OS#2517
This commit actually doesn't fix the entire code, since anyway osmux
conns are not supported and mgcp_conn_get_rtp() will return NULL.
However, it makes the code more logical and easier to understand once
somebody refactors the code to make it work again.
Change-Id: Ib57e12e5a36b5842c40673c236907bbcbfc390f3
The short term of endpoint has always been "endp" througout the whole
project and not "ep".
- rename mcgp_ep.c to mgcp_endp.c
- rename mgcp_ep.h to mgcp_endp.h
Change-Id: Id52047bb2d0407655ac272c858ed3412b8ae9e6d
The endpoint and the define that computes the endpoint number is
defined in mgcp_internal.h. Since we have a dedicated module for
endpoint related code it makes sense to move the endpoint related
parts there.
- move struct mgcp_endpoint to mgcp_ep.h
- move #define ENDPOINT_NUMBER(endp) to mgcp_ep.h
Change-Id: Ibae55e1859bd41e2d1918eda433418b4bf8365fe
The MGCP spec in RFC3435 is quite clear: Connection Identifiers are
hexadecimal strings of up to 32 characters. We should not print and
parse them as integers on either client or server.
Change the internal uint32_t representation of connection identifiers
to a string representation in the client and also in the server.
Closes: OS#2649
Change-Id: I0531a1b670d00cec50078423a2868207135b2436
in point_lookup() the connection pointer is determined using
mgcp_conn_get_rtp() this function may return 0. At the moment
there are no nullpointer checks implemented
Add checks to test for nullpointer.
Fixes: Coverity CID#178662
Change-Id: If9a3c1ac002bc8adc90ca1c1c3dd1db4feea07ac
Leave the old osmo-bsc_mgcp and libosmo-legacy-mgcp as it is; on a copy thereof
(added by a previous commit), apply changes to initially implement the new
osmo-mgw.
Adjust build system and debian packaging to accomodate the new libosmo-mgcp and
osmo-mgw.
The main differences:
*) use a list to manage rtp connections.
Aggregate all rtp related information inside a single struct.
Use a linked list to manage the both connections (net and bts).
The idea behind using a list is that we might support conference
calls at some later point.
Store the linked list in struct mgcp_endpoint, have a private linked
list for each endpoint. The list contains connection items which are
implemented in struct mgcp_conn. A connection is allocated and freed
using the functions in mgcp_conn.c. A connection is allocated on the
reception of a CRCX command and freed with the reception of a DLCX
command.
*) remove external transcoder feature
Fortunatelly the external transcoder feature is not needed
anymore. This patch removes the related code.
*) vty: get rid of CONN_BTS and CONN_NET
Since the new connection model does not make a difference
between BTS and NET connections the VTY should not use
the fixed CONN_BTS and CONN_NET constants.
- Handle the conns list inside the endpoint directly
- introduce function to dump basic rtp connection info
- introduce human readable names for connections
Parts of the code adjusted to use generalized connections instead of explicit
BTS/NET ones:
- teach mgcp_send_dummy() to send dummy packets to any RTP connection
- network: generalize mgcp_bind_net/bts_rtp_port()
- network: generalize mgcp_send()
- tap: generalize call tapping feature
- stat: generalize statistics
- Replace rtp_data_net() and rtp_data_bts() with generalized rtp_data_rx()
*) mgcp_protocol.c fixes:
- check ci string before it is converted:
In case of missing ci, a nullpointer is delivered to strtoul().
Add a function that takes ci, checks it and converts it to an
uint32_t. Use the return code to react on missing ci.
- output error message on missing CI.
- when parsing the mode, print log message when mode is missing.
- use mode_orig when mode is missing.
- fix ptime formatstring to use %u rather than %d.
- cosmetic: log when connection is deleted on DLCX.
- change loglevels of CRCX, MDCX, DLCX events from DEBUG to NOTICE.
*) mgcp_test
- apply rename of strline_r() to mgcp_strline().
- MGCP command macros:
- Add 'I: 1' parameters.
- Use proper port numbers:
from m=audio 0 RTP/AVP 126
to m=audio 16002 RTP/AVP 128
- Change ptime to 'a=ptime:40' because this is what the MGW currently
returns. CRCX generally feed a ptime:40 and this is expected to be
returned.
- struct mgcp_test: Use only one ptype, there are no explicit BTS and NET
endpoints anymore.
Hence remove one column from tests[].
- test_messages():
- Enable: remove '#if 0'
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway.
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_retransmission():
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_packet_error_detection():
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- remove endpoint init, now done internally.
- add false assert in error case.
- Assert that a conn really vanishes on DLCX, previously the conn would
remain and just be unused, now it is actually discarded.
- test_no_cycle()
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- test_no_name()
- Enable: remove '#if 0'.
- remove endpoint init, now done internally.
- add false assert in error case.
- mgcp_test.ok: adjust expected results to status quo:
- We now see two dummy packets instead of one, now sent to both sides because
we don't know of BTS or NET side. (maybe drop dummy packets later...)
- packet duration, conn mode: now sane defaults show instead of unset.
- various whitespace and formatting changes from lindent.
Change-Id: Ie008599136c7ed8a0dfbb0cf803188975a499fc5
This a cosmetic commit, copying libosmo-legacy-mgcp to libosmo-mgcp and
osmo-bsc_mgcp to osmo-mgw 1:1 at first, to provide a basis for next patches
that highlight the changes from legacy to new code.
Until osmo-msc and osmo-bsc are adjusted to operate with the new code, we will
keep the legacy code alongside the new code. The legacy code might be dropped
later.
Change-Id: Idf54481754a1765bdb2d0d7033bc0d7dc2018024