A new osmux bind-ip-v6 VTY command is added, similar to what's already
available for RTP. This way the user can decide whether to support IPv4,
IPv6 or both types of IP versions.
Both IP sockets are by default disabled, and must be explicitly enabled
by setting the bind-ip in the VTY configuration.
Change-Id: I446cd7da217e9f4a74995d7784ae55dcc60a29b7
Let's use the port part of the struct mgcp_rtp_end->addr field instead
of keeping it separate. This makes it easier passing around and
using/checking the RTP remote address + port, and avoids confusion
having to check stuff outside of the address, with its port part
potentially unset.
Change-Id: I294eb5d85fae79bf62d36eb9e818426e187d442c
They are mostly not even as large as the talloc header used to
dynamically allocate them, and they are also not "shared" by anything.
Change-Id: I7b46d531c5d3b53984f2ce44538116973f6a074d
The two callback functions policy_cb and change_cb are essentially dead
code. They also make the code more difficult to read and understand.
Lets remove them.
Change-Id: I19f67db1c56473f47338b56114f6bbae8981d067
When mgcp_udp_send() is called, the memory where *buf is pointing to is
never modified. It should be marked as const.
Change-Id: Iac90de5beb19bf52586ac6ffeab9eb5152edf339
This is useful for affecting the 802.1Q PCP value without any separate
external packet filter rules for classification.
Change-Id: I69136c6dd114c24b1dace034e75dba5157bac37e
Depends: libosmocore.git I89abffcd125e6d073338a5c6437b9433220e1823
libosmocore If22988735fe05e51226c6b091a5348dcf1208cdf introduces
an even more convenient mechanism for specifying the DSCP of
an IP socket via OSMO_SOCK_F_DSCP()
Change-Id: If0b11dea08716ed3952a25b546b2a9bd013857bf
This commit allows for fully IPv6 systems to work fine. However, if a
remote endpoint still wants to use IPv4, it will fail since at this
point osmo-mgw still doesn't re-bind the local end of the connection to
an IPv4 after having initially bound it to an IPv6 one. This kind of
scenarios get fixed in next commits.
TODO: really bind the socket if a different IP address is requested.
Change-Id: I8ed94bd3f674f498e6ba315f44a351fff9c1be15
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
The rate counter definition (enums) are still in mgcp.h.
Lets move them to mgcp_ratectr.h since it makes more sense
to keep them there.
Change-Id: Id37f66673bc20f9c2cc47a6b44cdfe75f728b936
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
struct mgcp_config contains a function pointer realloc_cb, which is
never popoulated nor used anywhere in the code. Lets remove it
Change-Id: I8d58281e1ff898638293c9e8cb000329462c7a70
Right now a lot of errors with MGCP processing are invisible in rate
counters which makes them difficult to trace or even notice in
a production environment. E.g. reaching a limit of MGCP endpoints
is completely invisible even though it's a critical opertion alarm.
Change-Id: I6db68f044255c927dfd534fed880e405ec3ed4d6
OsmoMGW has a lot of nice built-in statistics (rate_ctr,...) but it
seems the only way to look at them is via the VTY. While libosmocore
contains automatic exposure of all rate counters via CTRL, the CTRL
interface simply is not used by osmo-mgw so far.
Closes: OS#4441
Change-Id: I7ed6bdb9f4749c24ca11a5905a620546cfe42952
The callback function mgcp_get_format() is used to request the codec
parameters for a specific connection. This function returns the
parameters as idividual pointers. Since there is a struct that holds all
important codec information among the ones which are currently returned
by mgcp_get_format, lets just use this codec struct as single return
value.
Change-Id: I348f9141eb59ed1a986447b96ab4a24ddf326936
Related: OS#3807
There are different specifications around on how a GSM-HR frame should
be encapsulated into an RTP packet. RFC5593 specifies a ToC (Table of
Contents) byte to be prepended in front of the payload data.
The two formats can be distinguished easily by their length. Then the
data can be formatted into the corresponding opposite format and vice
versa.
- Add new VTY rtp-patch options
- Add conversion function
Change-Id: Iceef19e5619f8c92dfa7c8cdecb2e9b15f0a11a1
Related: OS#3807
Add a watchdog timer to connections, and close these connections when
the watchdog timer expires. Kick the watchdog whenever RTP messages or
the relevant MGCP messages arrive. Add the currently remaining timeout
to "show mgcp stats" in the VTY.
This feature is disabled by default, as it is incompatible with LCLS
(connections in LCLS state appear to be inactive). Enable it with the
new "conn-timeout" VTY setting. In general, this feature can be used to
work around interoperability problems causing connections to stay open
forever, and slowly exhausting all available ports. This happened for
various reasons already.
MDCX is the only relevant MGCP message:
- CRCX creates the conn and timer
- DLCX deletes the conn and timer
- MDCX is the only remaining supported MGCP message that indicates a CI
- Can't easily generically parse a CI for all MGCP messages, parsing is
done in handle_modify_con().
Related: OS#3429
Change-Id: I18886052e090466f73829133c24f011806cc1fe0
Add a counter group for DLCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of DLCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'
While here, rename MGCP_MDCX_FAIL_DEFERRED_BY_POLICY to
MGCP_MDCX_DEFERRED_BY_POLICY; we have decided that deferred connections
aren't failures, and this keeps names used by DLCX and MDCX in sync.
Also remove some allocation failure checks with OSMO_ASSERT(); such
checks aren't en vogue anymore.
Change-Id: Ie0dde2faf02fd68a69f986973d39b1bea367039b
Depends: I80d36181600901ae2e0f321dc02b5d54ddc94139I
Related: OS#2660
Add a counter group for aggregated RTP connection statistics.
This group contains RTP counters which aggregate values of the
ephemeral RTP counters maintained per connection (mgcp_conn).
This provides a global overview of RTP processing for each
trunk throughout the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
While here, fix a typo in an item of the mgcp_conn_rate_ctr_desc array:
"rtp:octets_rx" was displayed for outbound packes; now says "_tx".
Change-Id: I80d36181600901ae2e0f321dc02b5d54ddc94139
Related: OS#2660
Add a counter group for MDCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of MDCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
Change-Id: I79c27425ba40c3a85edc6cd846cba325d847298c
Depends: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Related: OS#2660
Add counters for error conditions which I overlooked in
commit 1e174875bf
Change-Id: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Depends: If4f097c5e441914eaa24c7657813ebb3f9a49916
Related: OS#2660
Add a counter group for CRCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of CRCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
For example, after running the TTCN3 mgw test suite, the counters show
the following values:
OsmoMGW> show rate-counters
crxc statistics:
crcx:success: 88 (0/s 88/m 0/h 0/d) CRCX command processed successfully.
crcx:bad_action: 0 (0/s 0/m 0/h 0/d) bad action in CRCX command.
crcx:unhandled_param: 1 (0/s 1/m 0/h 0/d) unhandled parameter in CRCX command.
crcx:missing_callid: 1 (0/s 1/m 0/h 0/d) missing CallId in CRCX command.
crcx:invalid_mode: 1 (0/s 1/m 0/h 0/d) connection invalid mode in CRCX command.
crcx:limit_exceeded: 0 (0/s 0/m 0/h 0/d) limit of concurrent connections was reached.
crcx:unkown_callid: 0 (0/s 0/m 0/h 0/d) unknown CallId in CRCX command.
crcx:alloc_conn_fail: 0 (0/s 0/m 0/h 0/d) connection allocation failure.
crcx:no_remote_conn_desc: 1 (0/s 1/m 0/h 0/d) no opposite end specified for connection.
crcx:start_rtp_failure: 0 (0/s 0/m 0/h 0/d) failure to start RTP processing.
crcx:conn_rejected: 0 (0/s 0/m 0/h 0/d) connection rejected by policy.
OsmoMGW>
These same counters are now also shown by 'show mgcp stats'
in the context of the trunk which they belong to.
With input from Philipp Maier.
Change-Id: Ida82fc340d5c66180e5fe9a0d195e9be6dc64c61
Related: OS#2660
The function setup_rtp_processing() in mgcp_protocol.c executes a
function pointer setup_rtp_processing_cb(). The function pointer
gets two struct mgcp_rtp_end pointers as parameter. To get those
parameters it has to dereference them from struct mgcp_conn_rtp
pointers. The variable conn_src is such a struct pointer and there
are conditions where this pointer may be NULL. The function at the
function pointer should get the conn pointers directly instead of
the dereferenced end (rtp) pointers. This also gives additional
flexibility to the implementation behind the function pointer,
which is not yet defined (the function pointer points always to
a stub function since we donot support transcoding yet.
- give conn pointers directly to setup_rtp_processing_cb() insed
of dereferencing conn_src->end
Change-Id: Id46e9bfba88613387026639eb4957221cce6820a
Closes OS#3406
At the moment the MGW has a fixed domain name string that is not even
checked properly.
- Make domain name configurable, use the current "mgw" string as
defualt to maintain compatibility
- Check the domain name with each request. If the endpoint contains
an unexpected domain name, the request must be rejected.
Change-Id: Ia91ac428ba83ac1f9b52a0ec8dbf00ef7876da9e
The variable number_endpoints is used as a length indicator
for the array that contains the trunk endpoints at all times.
When osmo-mgw is startet up, the variable is set and osmo-mgw
will allocate the memory for the endpoints. However, it is
still possible to manipulate the variable via the telnet
interface. When the value is increased osmo-mgw might start
using unallocated memory at some point.
Store subsequent changes of number_enspoints in a separate
variable in order to write them to the config file. The
changes will then take effect after a restart.
Closes: OS#2632
Change-Id: I3994af016fb96427263edbba05f560743f85fdd4
Currently there are two ways to set the rtp bind ip-address (local
ip address where the rtp streams are bound to). It is possible to
set no set an rtp bind ip, if none no address is configured, then
the ip address where the mgcp service is bound to is used.
On a system with multiple network interfaces it is likely that
there are the remote end is not reachable through the interface
that has been configured. In this case rtp ip-probing can be
enabled via vty option in order to automatically detect the
ip address of the interface that points towards the remote end.
The autodetection can only work if the ip-address is known when
a CRCX is performed. For this the remote entity must include the
remote ip address in the sdp trailer.
Implement probing to determine te right local ip address
Add debug log to display which ip address is actually used
Add a VTY option for the probing functionality.
Change-Id: Ia57cf7dab8421fd3ab6e1515727db0080373485e
The way how osmo-mgw decides when to send a dummy packet and
when not is not very obvious.
use more explicit if statements, and define constants. Also add
comments that explain how it works.
Change-Id: Ie7ee9409baec50a09fb357d655b5253434fae924
the functions rtp_calculate_port(), mgcp_timeslot_to_endpoint(),
mgcp_endpoint_to_timeslot() were a hack to map CIC addresses
to endpoints and ports. This is no longer needed.
Remove the affected functions.
Change-Id: I9ef14396dc9f97e570d9bcfb4d9b4a94e650ad46
mgcp.h includes mgcp_ep.h but does not use anything from it. This
does not hurt the mgcp code internally, but when mgcp.h is included
by an application compilation fails because mgcp_ep.h is not
installed.
remove mgcp_ep.h from include list in mgcp.h
add mgcp_ep.h to include list in mgcp_conn.c where it is needed.
Change-Id: Ib58a8ed64f729055282c2b9673f7684cdfdb5936
Remove mgcp_common.c and replace with mgcp_common.h.
Move mgcp_common.h from mgcp_client/ to mgcp/;
Place a compile-time copy of it back in mgcp_client/.
Add builddir/include to compiler -I paths to find generated header.
Rationale:
- Keep separate copies of the file for each of the library to not require
debian dependencies between the two libraries.
- Avoid code dup by copying during 'make' (think: a generated header, BUILT_SOURCE).
- The copy does not have implications for linking (like mgcp_common.c did) nor
is it a source for build confusion or fallout in other projects, because it
does not reach across several git source trees (like gsm_data_shared.h did).
mgcp_connection_mode_strs are not actually used in libosmo-mgcp, so drop them.
(It would make semantic sense to have then in mgcp, but we can add it when it
is needed. A similar value string array remains in libosmo-mgcp-client.)
Change-Id: I7a5d3b9a2eb90be7e34b95efa529429f2e6c3ed8
Leave the old osmo-bsc_mgcp and libosmo-legacy-mgcp as it is; on a copy thereof
(added by a previous commit), apply changes to initially implement the new
osmo-mgw.
Adjust build system and debian packaging to accomodate the new libosmo-mgcp and
osmo-mgw.
The main differences:
*) use a list to manage rtp connections.
Aggregate all rtp related information inside a single struct.
Use a linked list to manage the both connections (net and bts).
The idea behind using a list is that we might support conference
calls at some later point.
Store the linked list in struct mgcp_endpoint, have a private linked
list for each endpoint. The list contains connection items which are
implemented in struct mgcp_conn. A connection is allocated and freed
using the functions in mgcp_conn.c. A connection is allocated on the
reception of a CRCX command and freed with the reception of a DLCX
command.
*) remove external transcoder feature
Fortunatelly the external transcoder feature is not needed
anymore. This patch removes the related code.
*) vty: get rid of CONN_BTS and CONN_NET
Since the new connection model does not make a difference
between BTS and NET connections the VTY should not use
the fixed CONN_BTS and CONN_NET constants.
- Handle the conns list inside the endpoint directly
- introduce function to dump basic rtp connection info
- introduce human readable names for connections
Parts of the code adjusted to use generalized connections instead of explicit
BTS/NET ones:
- teach mgcp_send_dummy() to send dummy packets to any RTP connection
- network: generalize mgcp_bind_net/bts_rtp_port()
- network: generalize mgcp_send()
- tap: generalize call tapping feature
- stat: generalize statistics
- Replace rtp_data_net() and rtp_data_bts() with generalized rtp_data_rx()
*) mgcp_protocol.c fixes:
- check ci string before it is converted:
In case of missing ci, a nullpointer is delivered to strtoul().
Add a function that takes ci, checks it and converts it to an
uint32_t. Use the return code to react on missing ci.
- output error message on missing CI.
- when parsing the mode, print log message when mode is missing.
- use mode_orig when mode is missing.
- fix ptime formatstring to use %u rather than %d.
- cosmetic: log when connection is deleted on DLCX.
- change loglevels of CRCX, MDCX, DLCX events from DEBUG to NOTICE.
*) mgcp_test
- apply rename of strline_r() to mgcp_strline().
- MGCP command macros:
- Add 'I: 1' parameters.
- Use proper port numbers:
from m=audio 0 RTP/AVP 126
to m=audio 16002 RTP/AVP 128
- Change ptime to 'a=ptime:40' because this is what the MGW currently
returns. CRCX generally feed a ptime:40 and this is expected to be
returned.
- struct mgcp_test: Use only one ptype, there are no explicit BTS and NET
endpoints anymore.
Hence remove one column from tests[].
- test_messages():
- Enable: remove '#if 0'
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway.
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_retransmission():
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_packet_error_detection():
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- remove endpoint init, now done internally.
- add false assert in error case.
- Assert that a conn really vanishes on DLCX, previously the conn would
remain and just be unused, now it is actually discarded.
- test_no_cycle()
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- test_no_name()
- Enable: remove '#if 0'.
- remove endpoint init, now done internally.
- add false assert in error case.
- mgcp_test.ok: adjust expected results to status quo:
- We now see two dummy packets instead of one, now sent to both sides because
we don't know of BTS or NET side. (maybe drop dummy packets later...)
- packet duration, conn mode: now sane defaults show instead of unset.
- various whitespace and formatting changes from lindent.
Change-Id: Ie008599136c7ed8a0dfbb0cf803188975a499fc5
This a cosmetic commit, copying libosmo-legacy-mgcp to libosmo-mgcp and
osmo-bsc_mgcp to osmo-mgw 1:1 at first, to provide a basis for next patches
that highlight the changes from legacy to new code.
Until osmo-msc and osmo-bsc are adjusted to operate with the new code, we will
keep the legacy code alongside the new code. The legacy code might be dropped
later.
Change-Id: Idf54481754a1765bdb2d0d7033bc0d7dc2018024
Pau Espin
Eric Wild
Philipp Maier
Harald Welte
Alexander Chemeris
Oliver Smith