The previous name is misleading since the function is not really sending
stuff over a socket, but rather handling/dispatching the incoming
message internally (and finally later it may be sent over a socket under
some conditions).
Change-Id: Idaf791997b8438a4aede50f614afa0d55ad41faa
First validate the origin of the message, then later the content
of the message and finally execute whatever triggers are necessary.
This way contents from unknown senders are not even parsed or acted
upon, avoiding useless potential harm.
Change-Id: I011a6d7d705768c32a35cec5cd7169725a21a670
The previous naming was quite confusing, since the function is not
really checking whether a conversion is needed, but rather whether the
codec has the AMR RTP mode defined explicitly and hence forced.
The previous naming didn't harm because the amr_oa_bwe_convert also
supports the conversion path OA<->OA and BE<->BE.
Hence nowadays the amr_oa_bwe_convert() function is called always if the
dst conn has its codec with AMR RTP mode explicitly set, no matter if
the src and dst conn have the same mode.
Related: SYS#6161
Change-Id: I8dce3038ebccf5e1e37e2908070a67d66693a96f
When converting IuUP to AMR/RTP, bridge_iuup_to_rtp_peer() sets the AMR
side's payload type number and then calls mgcp_send(). In mgcp_send(),
do not attempt to patch the payload type number a second time.
In mgcp_send(), skip patching payload type numbers if the source side is
IuUP. This matches exactly the case of converting IuUP to AMR/RTP.
There already is a check for IuUP, but for the wrong side. Drop that one
and explain in a comment why.
Move the comment about transcoding into the failure branch, where it is
relevant and doesn't clutter the new explanation of payload type
patching conditions.
Related: OS#5720
Related: SYS#5092
Change-Id: I7c722cd959f76bd104ae4941d182c77e5c025867
* Move all of them to an anonymous "osmux" substruct to have them all
together.
* Rename some fields to clarify its meanings, similar to what
was already done in osmo-bts.
* Move the port VTY config next to the ip address ones.
Change-Id: Icc1c1ce3ab3a8beb941cda7c112485a0db882a90
A new osmux bind-ip-v6 VTY command is added, similar to what's already
available for RTP. This way the user can decide whether to support IPv4,
IPv6 or both types of IP versions.
Both IP sockets are by default disabled, and must be explicitly enabled
by setting the bind-ip in the VTY configuration.
Change-Id: I446cd7da217e9f4a74995d7784ae55dcc60a29b7
Let's use the port part of the struct mgcp_rtp_end->addr field instead
of keeping it separate. This makes it easier passing around and
using/checking the RTP remote address + port, and avoids confusion
having to check stuff outside of the address, with its port part
potentially unset.
Change-Id: I294eb5d85fae79bf62d36eb9e818426e187d442c
There's no need to separate between BSS and CN side nowadays, the
different types are used nowehere. This separation dates from
osmo-bsc-nat code days.
Change-Id: I65effeddf033eb1955553e8d659c593b4e67f7bc
Documentation of rtp_bridge_cb was outdated, and caused confusion when
adding initial osmux support. Let's clear all the mess.
Change-Id: I42d1f2e2919eae3b1555ca4929e571855960792e
This makes all lines operating on rate groups way shorter. The "ctrg"
naming is already used in tons of places in osmocom code.
Change-Id: I745eddbf66e7d811bb73c8ae9bb54ea93073c71b
The local Osmux IP address (cfg->osmux_addr) was never applied in
generated MGCP messages. Instead, the RTP one was written into the
MGCP message.
Related: SYS#5987
Change-Id: I305f2501221e86d1eb0140446c03f36698f3194a
Make sure that RTCP packets do not enter the code path where AMR OA and BWE
is converted. The conversion will fail and the RTCP packet will be
dropped.
Change-Id: Ic850344d8b5f7710d12e4553a4033b733dced52b
Related: SYS#5902
Discovered while debugging wireshark CRC calculation and implementing
new IuUP code in libosmocore.
Change-Id: Ic8350d1f9a9e5dcefeb787462d267bfac08d778f
There is no obvious reason why we would want to complicate the code by
caching pointers, since pointer traversal is probably not a performance
bottleneck, and if it is we should rather take a look at our dozens of
linked lists first..
Change-Id: I2456ba63598f76200d53e00223abf60bb36a49c0
They are mostly not even as large as the talloc header used to
dynamically allocate them, and they are also not "shared" by anything.
Change-Id: I7b46d531c5d3b53984f2ce44538116973f6a074d
Trunk is safe, since it will not disappear sooner than the endpoints or
connections.
osmux still missing!
Change-Id: I15b01085f31e9a10a1ad381713ca2275356ca20c
The braces as put before this patch would read as {"is known", "is not
yet known"}, which is confusing the actual situation.
Change-Id: Icd1f22a9f4147a2758c2f068ecba46cf7f732604
On a deployed osmo-mgw with RTP traffic coming from a thirdparty
RTP source, it was usual to see log messages like following one from
time to time:
"The input timestamp has an alignment error of 159 on SSRC"
Doing a quick traffic analysis showed that the above mentioned RTP
source was generating traffic from time to time containing RTP packets
with the Marker (M) bit.
Those messages were logged because the verification & patching funcions
in osmo-mgw were not Marker-bit aware. Hence, this patch implements
support for Marker bit when handling RTP packets.
The Marker bit is usually used as a start of a talkspurt, and has to be
considered a syncrhonization point, where timestamp and relation to real
time don't need to match with last received RTP packet in the stream.
Related: SYS#5498
Change-Id: I1fb449eda49e82607649122b9b9d983a9e5983fa
The following sequence of events was seen frequently in a osmo-mgw
instance running on the field with heavy traffic:
"""
endpoint:rtpbridge/1@mgw CRCX: creating new connection ...
mgcp_network.c:236 endpoint:rtpbridge/1@mgw CI:1C8CCFA9 Failed to send dummy RTP packet.
"""
Allegedly, that happens because at CRCX time the remote address may
still not be known, hence we end up trying to send a dummy rtp packet
to, for instance, host 0.0.0.0 port 0, which will of course fail.
Let's avoid sending it if the address is not yet known.
Similary, same issue could be seen during MDCX, since at MDCX we don't
necessarily need to have a valid addr+port (there could be several MDCX
and only last one set it).
Finally, the keepalive timer also needs the check, since it iterates
over all connections, and it could be that some is still not fully
configured.
Related: SYS#5498
Change-Id: I8ceafda691146823b12232b4a804b4ce74acbdc8
Several log messages showing "Failed to send dummy RTP packet." were
seen in a osmo-mgw on the field. Let's re-use the function to check and
provide more information on what's wrong to ease debugging.
Related: SYS#5498
Change-Id: Iee6ac1f4d24c131e3bf40c37e6fdc252e5208ec8
This is a preparation for next commit, where one of the function will
require an static function available before it in the file.
Moving the functions also make sense, in order to have the 3 mgcp send
functions together for more easy understanding.
This commit does small style changes to fix followint linter errors:
"""
src/libosmo-mgcp/mgcp_network.c:1036: ERROR:SPACING: space required after that ',' (ctx:VxV)
src/libosmo-mgcp/mgcp_network.c:1091: WARNING:BRACES: braces {} are not necessary for any arm of this statement
src/libosmo-mgcp/mgcp_network.c:1145: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
src/libosmo-mgcp/mgcp_network.c:1163: ERROR:ELSE_AFTER_BRACE: else should follow close brace '}'
src/libosmo-mgcp/mgcp_network.c:1204: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
src/libosmo-mgcp/mgcp_network.c:1226: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
"""
Change-Id: Iff8dab942182a0d909519acddb86be75d9cda7ae
The constant MGCP_DUMMY_LOAD is used ambigously. Sometimes it is used as
initalizer for an array, sometimes it is used as a single byte. Also the
name is not very expressive. Lets refactor this.
Change-Id: I21d96cefeeb647958bfa1e22a0ea030884746fad
Related: OS#4005
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
When mgcp_udp_send() is called, the memory where *buf is pointing to is
never modified. It should be marked as const.
Change-Id: Iac90de5beb19bf52586ac6ffeab9eb5152edf339
A call agent may send a CRCX to create a connection in LOOPBACK mode but
without specifiying the destination address. In those cases the MGW
should deduct the destination address from the first incoming RTP
packet.
Unfortunately this is currently blocked by an OSMO_ASSERT that checks the
current sa_familiy against the sa_family from the incoming packet. This
makes no sense since the current sa_family is still uninitalized, which
is expected and not an error since the code that follows will initalize
it.
It also makes sense not to access the osmo_sockaddr struct members
individually but rather copy the address as a wohle.
Since the event only happens once and since it is also somewhat special
it makes sense to log the event as well.
Change-Id: I2dbd6f62170a7f62e5287d04a4ee6716b8786c26
Related: OS#5123
This is useful for affecting the 802.1Q PCP value without any separate
external packet filter rules for classification.
Change-Id: I69136c6dd114c24b1dace034e75dba5157bac37e
Depends: libosmocore.git I89abffcd125e6d073338a5c6437b9433220e1823
libosmocore If22988735fe05e51226c6b091a5348dcf1208cdf introduces
an even more convenient mechanism for specifying the DSCP of
an IP socket via OSMO_SOCK_F_DSCP()
Change-Id: If0b11dea08716ed3952a25b546b2a9bd013857bf
We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
There exist trunk_loop commands, which sets an trunk->audio_loop
variable, however all it does is to turn on a log message. There is no
actual implementation present. Lets set the VTY commands to
DEFUN_DEPRECATED and remove the variable.
Change-Id: I72b0f8b908e32643e6e3db6ac024371b13c074a1
Otherwise some state is kept, like the previous CallId, which may then
provoke issues next time the endpoint is to be used.
Change-Id: I3ac4f4542c1c8c877127c64acce6c82b458f697f
It doesn't make sense to call the function several times since anyway we
are only binding during
allocate_port()->mgcp_bind_net_rtp_port()->bind_rtp()->mgcp_create_bind()->osmo_sock_init2().
Let's better calculate the local IP addr once and use that stored value.
THis is a previous step towards next commit updating the local IP addr
and re-bindng if encessary.
Change-Id: I803b99c5e5fe0f92a5bf6796d8c25df88d1608e6
This commit allows for fully IPv6 systems to work fine. However, if a
remote endpoint still wants to use IPv4, it will fail since at this
point osmo-mgw still doesn't re-bind the local end of the connection to
an IPv4 after having initially bound it to an IPv6 one. This kind of
scenarios get fixed in next commits.
TODO: really bind the socket if a different IP address is requested.
Change-Id: I8ed94bd3f674f498e6ba315f44a351fff9c1be15
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
Instead of numerous arguments (buf, len and context data), use a msgb, like
most other osmo programs do, with a msb->cb pointing at a context data struct.
This opens the future for adding/stripping IuUP header data from the msgb
easily.
(Checked to pass current ttcn3-mgw-tests.)
Change-Id: I3af40b63bc49f8636d4e7ea2f8f83bb67f6619ee
Pau Espin
Neels Hofmeyr
Philipp Maier
Eric Wild
Neels Hofmeyr
Harald Welte