This makes all lines operating on rate groups way shorter. The "ctrg"
naming is already used in tons of places in osmocom code.
Change-Id: I745eddbf66e7d811bb73c8ae9bb54ea93073c71b
There is no obvious reason why we would want to complicate the code by
caching pointers, since pointer traversal is probably not a performance
bottleneck, and if it is we should rather take a look at our dozens of
linked lists first..
Change-Id: I2456ba63598f76200d53e00223abf60bb36a49c0
They are mostly not even as large as the talloc header used to
dynamically allocate them, and they are also not "shared" by anything.
Change-Id: I7b46d531c5d3b53984f2ce44538116973f6a074d
the trunk_nr is in struct mgcp_trunk. The trunk number can not be
negative and there is no magic value that makes use of the fact that it
could be negative. Lets use unsigned int to make this less irretating.
Change-Id: I5d0e1d76adb8c92d84331a0aca2496908e41d621
Related: SYS#5535
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
With just one E1 line, the 'show mgcp' command outputs
several hundred lines to the vty. Add a 'active' parameter to
only show endpoints that are active.
Change-Id: I23a26b4fdc03d8b2469d293dd6c06ed83ce739e9
This is useful for affecting the 802.1Q PCP value without any separate
external packet filter rules for classification.
Change-Id: I69136c6dd114c24b1dace034e75dba5157bac37e
Depends: libosmocore.git I89abffcd125e6d073338a5c6437b9433220e1823
We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
The E1 trunk lacks the VTY commands force-realloc and rtp-accept-all.
However, the function that write the E1 trunk config includes those
commands. Also they would be applicable, so lets add those two commands
also for E1 trunks.
Change-Id: Ief2bc7502bb8d1e0f9c784d42edbe1aed5ffb728
When a trunk 0 is created (which is legal) than it is impossible to
write this trunk back to the config. The reason for this that there is
still a filtering in place from the time where trunk 0 was not allowed.
This filter needs to be extended to filter only virtual trunk 0 but not
E1 trunk 0 out.
Change-Id: Iad6b577b5a711c35f98c477351fde567d8c87298
To make clear which configuration changes (configure terminal)
apply when, add appropriate user attributes to VTY commands.
Change-Id: I2d9487801b3b78f94577264b56d217c926ef76a9
Related: SYS#4937, OS#1601
The VTY command "bind early" is deprecated but it prints an error
message and the DEFUN is not set to DEFUN_DEPRECATED.
Change-Id: I594a87d2f63826a9d7b4f6a380586b08b3b79518
There exist trunk_loop commands, which sets an trunk->audio_loop
variable, however all it does is to turn on a log message. There is no
actual implementation present. Lets set the VTY commands to
DEFUN_DEPRECATED and remove the variable.
Change-Id: I72b0f8b908e32643e6e3db6ac024371b13c074a1
This commit allows for fully IPv6 systems to work fine. However, if a
remote endpoint still wants to use IPv4, it will fail since at this
point osmo-mgw still doesn't re-bind the local end of the connection to
an IPv4 after having initially bound it to an IPv6 one. This kind of
scenarios get fixed in next commits.
TODO: really bind the socket if a different IP address is requested.
Change-Id: I8ed94bd3f674f498e6ba315f44a351fff9c1be15
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
Due to the internal handling of the trunks it was not possible to allow
an E1 trunk that has the ID 0. However this limitation is no longer
present, so we now can allow an E1 trunk with ID 0.
Change-Id: I302c2007628f607033686e277c407232351e66ad
Related: OS#2659
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
At the moment the number of possible E1 endpoints (depends on the number
of E1 timeslots that should be used) is hardcoded and the configuration
of the number of virtual endpoints has an off-by-one problem.
For the E1 timeslots one might choose not to occupy all E1 timeslots of
once. A one TRX E1 BTS usually requires 3 E1 timeslots. One as D-Channel
timeslot and two to cover the voice channels. The voice channels
timeslots need to be set up in osmo-mgw, while the D-Channel timeslot
must not be touched. The VTY config needs to be able to reflect that.
Change-Id: I73b31e3c236a61ea0a6f76ef5ff98ce589f52c77
Related: OS#2547
The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
E1 endpoint names also represent different rates, this may mean that
some rate / subslot combinations are not possible because they overlap
within nthe timeslot. When the equipment (BSC) is properly configured,
this will be no problem, however invalid configuration may cause the
selection of overlapping endpoints and this needs to be prevented, and
logged. Also rate counters need to be in place.
Change-Id: I18e90b10648a7e504371179ad144645fc82e1c27
Related: OS#2547
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
The config under the node mgcp is written with an indentation that has
one space too much.
Change-Id: I2aefeaf3d7ad4a98b7bfcdc7cbc1ce6ebcbe0537
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
When a trunk is selected that does not exist, a new one is created. In
this case the VTY would print an error message but the function exits
early. The code that would print the error is unreachable.
Change-Id: Ie8c3b083174eb8209df2c06f65db6d7bbfaa87f7
fixes: CID#210637
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
Right now a lot of errors with MGCP processing are invisible in rate
counters which makes them difficult to trace or even notice in
a production environment. E.g. reaching a limit of MGCP endpoints
is completely invisible even though it's a critical opertion alarm.
Change-Id: I6db68f044255c927dfd534fed880e405ec3ed4d6
Before this patch rate counters started right after trunk information
with no visual separation which was quite confusing. We're adding
a new line and a header to warn a user of the section change.
Change-Id: I3943def03ab821b05ac597f40bdfa4a3a71ddca3
It can be used together with LCLS, just make sure to also enable
keep-alive packets.
In OS#3429 it was pointed out, that during LCLS the media path remains
active but is not used. Without any traffic flowing, this looks like a
timed out connection and so it will be killed if conn-timeout is set.
However, OsmoBSC and OsmoMSC have an option to enable RTP keep-alive
packets (through libosmo-mgcp, originally intended to keep connections
behind NAT open). If that option is enabled, the keep-alive packets
should also prevent the conn-timeout.
Related: OS#3783
Change-Id: Ib4d19104d558a26a444a80fb36f4b7b33bc5cc59
VTY command to disable conn-timeout again, after it has been enabled.
conn-timeout was introduced in [1].
[1] Change-Id I18886052e090466f73829133c24f011806cc1fe0.
Change-Id: I7dee7dafaaf4bb93fd692ea06b52b9e012beac6d
* Cleanup naming to make it far more clear
* Drop 2 variables holding CID values (allocated_cid, cid), in favour of
1 value holdinf the value and one bool stating whether the value is
used.
* Change conn_osmux_allocate_cid to allow allocating either next
available CID or a specific one, in preparation for forthcoming patches.
This commit can be merged straight away because anyway osmux cannot be
enabled in current status (blocked by vty config) and
(conn_)osmux_allocate_cid was/is not called anywhere. However, it helps
improving code base for future re-introduction of Osmux as it is
envisioned.
Change-Id: I737a248ac6c74add8e917fe2e2f36779d0f1d685
There are different specifications around on how a GSM-HR frame should
be encapsulated into an RTP packet. RFC5593 specifies a ToC (Table of
Contents) byte to be prepended in front of the payload data.
The two formats can be distinguished easily by their length. Then the
data can be formatted into the corresponding opposite format and vice
versa.
- Add new VTY rtp-patch options
- Add conversion function
Change-Id: Iceef19e5619f8c92dfa7c8cdecb2e9b15f0a11a1
Related: OS#3807
Add a watchdog timer to connections, and close these connections when
the watchdog timer expires. Kick the watchdog whenever RTP messages or
the relevant MGCP messages arrive. Add the currently remaining timeout
to "show mgcp stats" in the VTY.
This feature is disabled by default, as it is incompatible with LCLS
(connections in LCLS state appear to be inactive). Enable it with the
new "conn-timeout" VTY setting. In general, this feature can be used to
work around interoperability problems causing connections to stay open
forever, and slowly exhausting all available ports. This happened for
various reasons already.
MDCX is the only relevant MGCP message:
- CRCX creates the conn and timer
- DLCX deletes the conn and timer
- MDCX is the only remaining supported MGCP message that indicates a CI
- Can't easily generically parse a CI for all MGCP messages, parsing is
done in handle_modify_con().
Related: OS#3429
Change-Id: I18886052e090466f73829133c24f011806cc1fe0
Add a counter group for DLCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of DLCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'
While here, rename MGCP_MDCX_FAIL_DEFERRED_BY_POLICY to
MGCP_MDCX_DEFERRED_BY_POLICY; we have decided that deferred connections
aren't failures, and this keeps names used by DLCX and MDCX in sync.
Also remove some allocation failure checks with OSMO_ASSERT(); such
checks aren't en vogue anymore.
Change-Id: Ie0dde2faf02fd68a69f986973d39b1bea367039b
Depends: I80d36181600901ae2e0f321dc02b5d54ddc94139I
Related: OS#2660
Add a counter group for aggregated RTP connection statistics.
This group contains RTP counters which aggregate values of the
ephemeral RTP counters maintained per connection (mgcp_conn).
This provides a global overview of RTP processing for each
trunk throughout the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
While here, fix a typo in an item of the mgcp_conn_rate_ctr_desc array:
"rtp:octets_rx" was displayed for outbound packes; now says "_tx".
Change-Id: I80d36181600901ae2e0f321dc02b5d54ddc94139
Related: OS#2660
Add a counter group for MDCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of MDCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
Change-Id: I79c27425ba40c3a85edc6cd846cba325d847298c
Depends: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Related: OS#2660
Make the 'mgcp show stats' VTY command display TX/RX counters
for an RTP stream. This command was already showing the counter
for dropped packets from the same counter group, so it seems
natural to display other relevant counters in the group as well.
Change-Id: I1313e64d7d8b49964f21fc8d213cba6c9fb6c7cf
Related: OS#2660
Add a counter group for CRCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of CRCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
For example, after running the TTCN3 mgw test suite, the counters show
the following values:
OsmoMGW> show rate-counters
crxc statistics:
crcx:success: 88 (0/s 88/m 0/h 0/d) CRCX command processed successfully.
crcx:bad_action: 0 (0/s 0/m 0/h 0/d) bad action in CRCX command.
crcx:unhandled_param: 1 (0/s 1/m 0/h 0/d) unhandled parameter in CRCX command.
crcx:missing_callid: 1 (0/s 1/m 0/h 0/d) missing CallId in CRCX command.
crcx:invalid_mode: 1 (0/s 1/m 0/h 0/d) connection invalid mode in CRCX command.
crcx:limit_exceeded: 0 (0/s 0/m 0/h 0/d) limit of concurrent connections was reached.
crcx:unkown_callid: 0 (0/s 0/m 0/h 0/d) unknown CallId in CRCX command.
crcx:alloc_conn_fail: 0 (0/s 0/m 0/h 0/d) connection allocation failure.
crcx:no_remote_conn_desc: 1 (0/s 1/m 0/h 0/d) no opposite end specified for connection.
crcx:start_rtp_failure: 0 (0/s 0/m 0/h 0/d) failure to start RTP processing.
crcx:conn_rejected: 0 (0/s 0/m 0/h 0/d) connection rejected by policy.
OsmoMGW>
These same counters are now also shown by 'show mgcp stats'
in the context of the trunk which they belong to.
With input from Philipp Maier.
Change-Id: Ida82fc340d5c66180e5fe9a0d195e9be6dc64c61
Related: OS#2660
Add VTY commands "show mgcp endpoint NAME" and
"show mgcp trunk <0-64> endpoint NAME" which
show information about specific endpoints.
Change-Id: I5330e697ec34bf215de91d44209048a8dc226d51
Related: OS#2660
Make the 'domain NAME' vty doc more descriptive, and add the hint that '*'
means any domain.
In check_domain_name(), exit early in success if the configured domain name is
'*'.
(Do not implement other wildcard functionality for partial matches or the
like, just the single '*'.)
Related: OS#3490
Change-Id: Ie0220c88d2f5cee15f2a90390b3c4590ac61d5eb
When creating the mgcp statistics (DLCX) and also when printing
values in the VTY. The printf placeholder %lu is used. However,
this is not portable when the same code is compiled on a machine
with different integer size (e.g. armv7).
- Use PRIu64 when printing ->current value of the rate counters
Change-Id: Ifb8944cec83868845f74ad84551eb090f812daf8
In struct mgcp_rtp_end one finds unsigned int counters. Those should
be replaced with libosmocore rate counters
- replace packets_rx, octets_rx, packets_tx, octets_tx and
dropped_packets with libosmocore rate counters.
Change-Id: I47c5c9006df5044e59ddebb895e62adb849d72d5
Related: OS#2517
Pau Espin
Eric Wild
Philipp Maier
Keith Whyte
Harald Welte
Alexander Chemeris
Oliver Smith