Before this patch, the free CID with the smallest number was always
selected to be used. This caused more or less the same subset of CIDs to
be used all the time, while the CIDs with bigger numbers were mostly
unused.
Let's distribute the use so that all CIDs are used roughly the same.
This has the advantage, among others, that the same CID will not be
re-used immediatelly after being freed if a new call is established.
It is useful to leave the CIDs unused for some time since the other end
peer may know of the call being tear down with some delay.
Hence if a new call is established immediately after the CID was
released, the same CID would be allocated and passed at the peer, which
would then detect that the old call (in its view still active) would
already make use of that remote CID.
Change-Id: I9dfbcc5e4b4c61ce217020e533d68fbcfa6b9f56
Related: SYS#6161
Unfortunately "-std=c99" is not sufficient to make gcc ignore code that
uses constructs of earlier C standards, which were abandoned in C99.
See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for
some related discussion.
Change-Id: I98a3c0d5cfda2c4b020652efb4f445f8288342b6
Let's use the port part of the struct mgcp_rtp_end->addr field instead
of keeping it separate. This makes it easier passing around and
using/checking the RTP remote address + port, and avoids confusion
having to check stuff outside of the address, with its port part
potentially unset.
Change-Id: I294eb5d85fae79bf62d36eb9e818426e187d442c
This makes all lines operating on rate groups way shorter. The "ctrg"
naming is already used in tons of places in osmocom code.
Change-Id: I745eddbf66e7d811bb73c8ae9bb54ea93073c71b
AMR that has the payload format bandwith-efficient is the same codec as
AMR that has the payload format octet-aligned. Its the same codec, and a
comparison of the codec info with the function codecs_same() should
return true (=equal).
The affected function codecs_same() is used by mgcp_codec_pt_translate().
When the egress payload type number is looked up, the ingress and egress
codec information is compared. When one end is using AMR in
bandwith-efficient format and the other end is using it in
octet-alingned format. Then the codec still must be recognized as the
same codec. Othersiwse the payload type number translation would not
work, even though the codec is the same on both sides.
Change-Id: I64731570c287a75d39c79c10e1bc09a37bdd54d6
Related: SYS#5834
There is no obvious reason why we would want to complicate the code by
caching pointers, since pointer traversal is probably not a performance
bottleneck, and if it is we should rather take a look at our dozens of
linked lists first..
Change-Id: I2456ba63598f76200d53e00223abf60bb36a49c0
The two callback functions policy_cb and change_cb are essentially dead
code. They also make the code more difficult to read and understand.
Lets remove them.
Change-Id: I19f67db1c56473f47338b56114f6bbae8981d067
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
This is a corrected version of:
Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Change-Id: I6d3a74f6087512130d85002348787bffc672de81
Related: SYS#5201
This reverts commit 6bad138c96.
Reason for revert: heap-use-after-free during 'make check'
in mgcp_test.c test_retransmission()
Change-Id: I96792a719c9c7273676ab9ffe0b9e2aae4c23166
Related: OS#5201
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
Change-Id: Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Related: SYS#5535
the trunk_nr is in struct mgcp_trunk. The trunk number can not be
negative and there is no magic value that makes use of the fact that it
could be negative. Lets use unsigned int to make this less irretating.
Change-Id: I5d0e1d76adb8c92d84331a0aca2496908e41d621
Related: SYS#5535
On a deployed osmo-mgw with RTP traffic coming from a thirdparty
RTP source, it was usual to see log messages like following one from
time to time:
"The input timestamp has an alignment error of 159 on SSRC"
Doing a quick traffic analysis showed that the above mentioned RTP
source was generating traffic from time to time containing RTP packets
with the Marker (M) bit.
Those messages were logged because the verification & patching funcions
in osmo-mgw were not Marker-bit aware. Hence, this patch implements
support for Marker bit when handling RTP packets.
The Marker bit is usually used as a start of a talkspurt, and has to be
considered a syncrhonization point, where timestamp and relation to real
time don't need to match with last received RTP packet in the stream.
Related: SYS#5498
Change-Id: I1fb449eda49e82607649122b9b9d983a9e5983fa
use the recently new available API to check both remote address and
port, instead of only the port.
It doesn't make sense to configure a conn as sendrecv if we have no IP
address to send stuff to, similar to what was already being checked with
the port.
Change-Id: I6ce8cf52930d423d3db8c27251be8350a26a4ede
Several log messages showing "Failed to send dummy RTP packet." were
seen in a osmo-mgw on the field. Let's re-use the function to check and
provide more information on what's wrong to ease debugging.
Related: SYS#5498
Change-Id: Iee6ac1f4d24c131e3bf40c37e6fdc252e5208ec8
The constant MGCP_DUMMY_LOAD is used ambigously. Sometimes it is used as
initalizer for an array, sometimes it is used as a single byte. Also the
name is not very expressive. Lets refactor this.
Change-Id: I21d96cefeeb647958bfa1e22a0ea030884746fad
Related: OS#4005
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
Due to the internal handling of the trunks it was not possible to allow
an E1 trunk that has the ID 0. However this limitation is no longer
present, so we now can allow an E1 trunk with ID 0.
Change-Id: I302c2007628f607033686e277c407232351e66ad
Related: OS#2659
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
Instead of numerous arguments (buf, len and context data), use a msgb, like
most other osmo programs do, with a msb->cb pointing at a context data struct.
This opens the future for adding/stripping IuUP header data from the msgb
easily.
(Checked to pass current ttcn3-mgw-tests.)
Change-Id: I3af40b63bc49f8636d4e7ea2f8f83bb67f6619ee
Some of the unit-tests initalize a second trunk (trunk2) but the test
never do anything with this trunk. Lets remove it.
Change-Id: I228aa45160152091baac9d9c2e6486b774278b6a
Related: OS#2659
At the moment the number of possible E1 endpoints (depends on the number
of E1 timeslots that should be used) is hardcoded and the configuration
of the number of virtual endpoints has an off-by-one problem.
For the E1 timeslots one might choose not to occupy all E1 timeslots of
once. A one TRX E1 BTS usually requires 3 E1 timeslots. One as D-Channel
timeslot and two to cover the voice channels. The voice channels
timeslots need to be set up in osmo-mgw, while the D-Channel timeslot
must not be touched. The VTY config needs to be able to reflect that.
Change-Id: I73b31e3c236a61ea0a6f76ef5ff98ce589f52c77
Related: OS#2547
The test assumes that the endpoint "rtpbridge/X@mgw" is at array
position X in many places. This does not necessarly have to match.
Accessing the array elements directly was the prefered way when the MGW
did use integer numbers and not strings to identify endpoints. Since the
endpoint name strings are used to access the endpoints the unit-test
should also reflect this.
Lets replace the integer variable last_endpoint with a string variable
and do related verifications based on strings.
Change-Id: Ic950c427f23be4a792af94972554637c2b0fbdf2
Related: OS#2659
The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
The E1 trunk number is currently not parsed, whenever a trunk prefix is
detected that indicates an E1 trunk, then the entire request is
rejected.
Parse the trunk number and select the trunk accordingly
Related: OS#2547
Change-Id: Ifdaab953544151e73b58cc3e95d21afdb40765f4
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
Currently in handle_create_con(), mgcp_conn_alloc() is called with NULl
ctx. As soon as this ctx is changed to be part of the trunk's endpoint
array (tcfg->endpoints), test will segfault because some fds from
previous tcfg are still registered after the whole tcfg object was freed
with talloc_free() by previous test. That's because
mgcp_endpoint_release() must be called on all endpoints to make sure all
registered components are correctly unplugged.
Related: OS#3950
Change-Id: I813d52b518ed0bb8db4e42dff83e040b0891fee2
In codecs_same(), do not compare the complete audio_name. The parts of it are
already checked individually:
- subtype_name ("AMR"),
- rate ("8000"; defaults to 8000 if omitted) and
- channels ("1"; defaults to 1 if omitted)
So by also checking the complete audio_name, we brushed over the match of
implicit "/8000" and "/8000/1", which otherwise works out fine.
As a result, translating payload type numbers in RTP headers now also works if
one conn of an endpoint set an rtpmap with "AMR/8000" and the other conn set
"AMR/8000/1".
It seems to me that most PBX out there generate ptmaps omitting the "/1", so
fixing this should make us more interoperable with third party SDP.
See IETF RFC4566 section 6. SDP Attributes:
For audio streams, <encoding parameters> indicates the number
of audio channels. This parameter is OPTIONAL and may be
omitted if the number of channels is one, provided that no
additional parameters are needed.
Also allowing to omit the "/8000" is a mere side effect of this patch.
Omitting the rate does not seem to be specified in an RFC, but is logical for
audio codecs defined to require exactly 8000 set as rate (most GSM codecs).
Add tests in mgcp_test.c.
Change-Id: Iab00bf9a55b1847f85999077114b37e70fb677c2
Instead of manually entering codec values, use mgcp_codec_add() to populate
test conns with codecs. The idea is to better test what actually happens when
parsing SDP codec strings.
Rewrite current test_mgcp_codec_pt_translate() from procedural to a data model
with human readable stdout logging.
This prepares to enable interpreting codec strings like "FOO/8000/1" as
equivalent with "FOO/8000": the SDP standard defines the final "/1", indicating
the nr of channels, as optional for a single channel, but osmo-mgw currently is
unable to match these two formats as identical. So prepare the
test_mgcp_codec_pt_translate() so that upcoming patches can incorporate strings
with and without the final "/1" by extending the struct arrays.
Change-Id: I888000d77512cfecb0f199b86ef6003e7fc0e6cb
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I51dc1cdcbe2a5587769335fbecb5039ef22cae5d
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I4da93dfc69b5585a197a7e201a1afb72c2f97030
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I48252415f9d0cd985ad097f334aa4c1665f52511
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: Ic28a5eacc4c441d68e8a20d2743956ab2e01125d
* Cleanup naming to make it far more clear
* Drop 2 variables holding CID values (allocated_cid, cid), in favour of
1 value holdinf the value and one bool stating whether the value is
used.
* Change conn_osmux_allocate_cid to allow allocating either next
available CID or a specific one, in preparation for forthcoming patches.
This commit can be merged straight away because anyway osmux cannot be
enabled in current status (blocked by vty config) and
(conn_)osmux_allocate_cid was/is not called anywhere. However, it helps
improving code base for future re-introduction of Osmux as it is
envisioned.
Change-Id: I737a248ac6c74add8e917fe2e2f36779d0f1d685
RFC3267 specifies two framing modes for AMR packets. An octet aligned
mode is specified where all fields of the AMR packets are aligned to
octet boundaries. The second framing mode is the bandwith efficient mode
where the fields are directly packed one after another.
- add paring/generation functions for related SDP fmtp parameters
- add conversion function to convert AMR payload
Depends: libosmo-netif I5b5a0fa644d8dbb1f04f9d7e35312683c7b3d196
Change-Id: I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Related: OS#3807
Add a watchdog timer to connections, and close these connections when
the watchdog timer expires. Kick the watchdog whenever RTP messages or
the relevant MGCP messages arrive. Add the currently remaining timeout
to "show mgcp stats" in the VTY.
This feature is disabled by default, as it is incompatible with LCLS
(connections in LCLS state appear to be inactive). Enable it with the
new "conn-timeout" VTY setting. In general, this feature can be used to
work around interoperability problems causing connections to stay open
forever, and slowly exhausting all available ports. This happened for
various reasons already.
MDCX is the only relevant MGCP message:
- CRCX creates the conn and timer
- DLCX deletes the conn and timer
- MDCX is the only remaining supported MGCP message that indicates a CI
- Can't easily generically parse a CI for all MGCP messages, parsing is
done in handle_modify_con().
Related: OS#3429
Change-Id: I18886052e090466f73829133c24f011806cc1fe0
The Connection Identifier is defined as a hex string, so clients may send the
ID back with or without leading zeros. Ignore all leading zeros when comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier with
leading zeros removed, which would mismatch pefore this patch.
Extend test_conn_id_matching() in mgcp_test.c to include leading zero tests.
Now, mgcp_conn_get() would match a valid id with *any* amount of leading zeros,
even if that far surpasses the permitted conn id length. Valid lengths of
incoming conn ids should be and is checked elsewhere.
Related: OS#3509
Change-Id: If55a64a2da47b6eff035711c08e4114d70dbec91
The Connection Identifier is defined as a hex string, so clients may send the
ID back in lower case. Convert to upper case before comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier in lower
case, which would mismatch pefore this patch.
Add test_conn_id_matching() in mgcp_test.c to verify case insensitivity.
Cosmetic: use strcmp(), not strncmp(). In the presence of a terminating nul as
we can assume here, this makes no functional difference, but it clarifies the
code.
Related: OS#3508
Depends: Ib0ee1206b9f31d7ba25c31f8008119ac55440797 (libosmocore)
Change-Id: I8e52278c3abe9e9c8c848c2b1538bce443f68a43
Oliver Smith
Pau Espin
Harald Welte
Philipp Maier
Eric Wild
Neels Hofmeyr
Neels Hofmeyr