The vty always checks if global_mgcp_client_conf exists. (there is also
an assert This check about global_mgcp_client_ctx).
global_mgcp_client_ctx and global_mgcp_client_conf are populated before
the VTY commands are installed. Unleass the caller uses the API wrong
and calls mgcp_client_vty_init with NULL pointers there cannot be a
problem with unpopulated pointers. Lets remove the checks as they are
not needed.
Change-Id: I892d14c588573f76640453cb9c194594289b59f1
Related: SYS#5091
Depending on the usecase of osmo_mpcg_client it may be helpful to send a
DLCX to certain endpoints. Usually this would be a wildcarded endpoint
that resets the entire trunk to drop lingering RTP flows which may still
present after a restart/crash, but it might be also a group of specific
endpoints. The user may specify an arbitrary amount of endpoints where
the mgcp client will send a DLCX to. It does not matter if the endpoints
are wildcarded or not.
Change-Id: I47e7ff858d5067b46d52329be5f362ff61c0dff8
Related: SYS#5535
The rate counter and stats item groups, which are allocated in
mgcp_ratectr.c are freed using a talloc destructor that is set in the
context of the item we just allocated using the stats / rate counter API
functions. When we do that, we risk overwriting an already existing
talloc destructor. Lets instead implement own free functions and set
those as talloc_destructor from above (trunk and MGCP config)
Change-Id: Ifc5091e9f95cc721e58d1eb2e55b97102c497706
Related: OS#5201
The two callback functions policy_cb and change_cb are essentially dead
code. They also make the code more difficult to read and understand.
Lets remove them.
Change-Id: I19f67db1c56473f47338b56114f6bbae8981d067
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
This is a corrected version of:
Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Change-Id: I6d3a74f6087512130d85002348787bffc672de81
Related: SYS#5201
The MGW domain name is usually checked while resolving the endpoint
after the trunk has been resolved. This was no problem before, but since
we allow wildcarded DLCX requests, which require only a trunk to work,
the check is not done correctly for wildcarded DLCX requests and invalid
domain names may slip through.
Checking the domain name earlier while the trunk is resolved makes sense
and it fixes the problem.
Change-Id: I9944a9103981fb5f4d0d8714ee2847ae020f76df
The logic when an endp pointer is guranteed and when we are able to
process the request without the endp pointer populated is qute complex.
This shows up as a bug to coverity.
Change-Id: I1d4221f2df13c43321d5466534485cf21f0d9010
Fixes: CID#237088
The request handler handle_delete_con currently rejects wildcarded DLCX
requests even though a wildcarded DLCX would be a valuable tool to
remove lingering connections from the trunk in case osmo-bsc has to be
restarted.
Change-Id: I5c2de6b2b61ee64ba9c0618fd20e8fc2fe6a5ed3
Related: SYS#5535
This reverts commit 6bad138c96.
Reason for revert: heap-use-after-free during 'make check'
in mgcp_test.c test_retransmission()
Change-Id: I96792a719c9c7273676ab9ffe0b9e2aae4c23166
Related: OS#5201
The function create_response_with_sdp calls add_params, which is rather short.
The code in there can also be put in create_response_with_sdp. The
decision whether the endpoint name (Z) should be added or not, should be
made by the caller.
Change-Id: I7e29c513f4386832646e96194ed6c2397405ed3b
Related: SYS#5535
There is not always an endp pointer present when mgcp_check_param() is
called but we always have a trunk pointer. Lets add a trunk parameter so
that the function can pick LOGPTRUNK when endp is not available.
Change-Id: I7327c5a105e7f0e20cabf64623ff9f36fd83bbb8
Related: SYS#5535
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
Change-Id: Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Related: SYS#5535
At the moment the MGCP request handling and message parsing is not
clearly separated. The function mgcp_parse_header() in mgcp_msg.c is
also responsible for resolving an endpoint. This leads to unclear layer
separation. We eventually end up in a situation where we can not execute
any request handler without beeing able to resolve an endpoint, however
this is necessary if we want to implement wildcarded DLCX resquests.
In the current situation a wildcarded DLCX is not possible to implement
as we always have to resolve a an to get to the trunk which we need to
iterate. However, we just can't resolve a free endpoint in a situation
where all endpoints on te trunk are in use.
We have to refactor the request handler so that the parsing in mgcp_msg
only extracts us the endpoint name. The resolving is then done in
mgcp_handle_message() in mgcp_protocol.c. Then we are able to decide
what to do if we are unable to resolve an endpoint but still be able to
resolve the trunk.
This patch does not change the behaviour of osmo-mgw yet, but it lays
the foundation for request handler implementations that can still
perform useful actions if no endpoint but a trunk has been resolved. A
wilcarded DLCX is such a case. It does not need an endpoint, just the
trunk.
Change-Id: I9f519d8a0ee8a513fa1e74acf3ee7dbc0991cdde
Related: SYS#5535
the trunk_nr is in struct mgcp_trunk. The trunk number can not be
negative and there is no magic value that makes use of the fact that it
could be negative. Lets use unsigned int to make this less irretating.
Change-Id: I5d0e1d76adb8c92d84331a0aca2496908e41d621
Related: SYS#5535
the various types of MGCP requests are implemented in request handlers
functions. The function pointers to those functions are held in an array
that is used to find the right handler and call it then. The struct used
to model the array is defined somewhat away from the array definition
and there is also a macro in between that does not help to make the code
more understandable. Lets refactor this a bit to have it more distinct.
Change-Id: I2ef167b2ac179d2b0683a27a095f9662fda460bf
Related: SYS#5535
There is verbose debug logging on MGCP messages sent out to the MGW, but
none on received MGCP messages. Add Rx logging.
Related: SYS#5529
Change-Id: Id76230896aa87c1a12bd5ad87a62430c048a2873
To see state transitions and events on LMGCP DEBUG logging, actually set
the log_subsys of the mgcp_client_fsm.
Related: SYS#5529
Change-Id: I6e84d5f7b85752a7a54f17be1d074b01d1467f26
When the mgcp_client_endpoint_fsm terminates, do not directly pull each
conn FSM instance (mgcp_client_fsm) into oblivion as well. Those should
emit a DLCX and wait for the "OK" response before deallocating.
In programs using the mgcp client endpoint FSM (osmo-bsc, osmo-msc),
this gets rid of false LMGCP ERROR logging related to DLCX like this:
Cannot find matching MGCP transaction for trans_id 71998
Related: SYS#5529
Change-Id: I8fbfec5533e9be9cc7ea550df1e6639a0a215973
Upon mgcp_conn_delete(), we unparent the FSM instance. Instead of
setting the talloc ctx to NULL, place the deleting conn under the
struct mgcp_client talloc ctx.
Related: SYS#5529
Change-Id: Ia12749e0d7d520f24a967c2df9a4651267e1019e
osmo-mgw currently does only a very simple detection method for
wildcarded requests, but it makes sense to split this detection
off into a separate function so that it can be used from different code
locations and we still have it at one place only.
Change-Id: I27018c01afb8acabfcf5d435c996cc9806e52d6b
Related: SYS#5535
The rate counter group is currently only referenced by an index. In a
system with multiple trunks this makes it difficult to say which rate
counter group belongs to which trunk sinde the index that is used does
not necessarly corespond to a specific trunk.
Since rate counter groups can now get a human readable name assigned, we
should do that.
Also E1 specific rate counters only make sense for E1-trunks, so they
should not be present on the virtual trunk.
Change-Id: I5e7f0e9081a06af48e284afa5c36a095b2847704
The braces as put before this patch would read as {"is known", "is not
yet known"}, which is confusing the actual situation.
Change-Id: Icd1f22a9f4147a2758c2f068ecba46cf7f732604
The loop that resets all endpoints in read_call_agent() starts counting
at endpoint index 1, but it should begin counting at index 0
Change-Id: I82a385e547e54d82eff95213652317ed2fdaadd8
The logic in mgcp_keepalive_timer_cb() only sends dummy packets for
endpoints 1-N, leaving out endpoint 0, this is not correct it should
include all endpoints (0-N).
Change-Id: I99a9b572eac26780bc1286a8dd63c4c5652fda4f
On a deployed osmo-mgw with RTP traffic coming from a thirdparty
RTP source, it was usual to see log messages like following one from
time to time:
"The input timestamp has an alignment error of 159 on SSRC"
Doing a quick traffic analysis showed that the above mentioned RTP
source was generating traffic from time to time containing RTP packets
with the Marker (M) bit.
Those messages were logged because the verification & patching funcions
in osmo-mgw were not Marker-bit aware. Hence, this patch implements
support for Marker bit when handling RTP packets.
The Marker bit is usually used as a start of a talkspurt, and has to be
considered a syncrhonization point, where timestamp and relation to real
time don't need to match with last received RTP packet in the stream.
Related: SYS#5498
Change-Id: I1fb449eda49e82607649122b9b9d983a9e5983fa
use the recently new available API to check both remote address and
port, instead of only the port.
It doesn't make sense to configure a conn as sendrecv if we have no IP
address to send stuff to, similar to what was already being checked with
the port.
Change-Id: I6ce8cf52930d423d3db8c27251be8350a26a4ede
The following sequence of events was seen frequently in a osmo-mgw
instance running on the field with heavy traffic:
"""
endpoint:rtpbridge/1@mgw CRCX: creating new connection ...
mgcp_network.c:236 endpoint:rtpbridge/1@mgw CI:1C8CCFA9 Failed to send dummy RTP packet.
"""
Allegedly, that happens because at CRCX time the remote address may
still not be known, hence we end up trying to send a dummy rtp packet
to, for instance, host 0.0.0.0 port 0, which will of course fail.
Let's avoid sending it if the address is not yet known.
Similary, same issue could be seen during MDCX, since at MDCX we don't
necessarily need to have a valid addr+port (there could be several MDCX
and only last one set it).
Finally, the keepalive timer also needs the check, since it iterates
over all connections, and it could be that some is still not fully
configured.
Related: SYS#5498
Change-Id: I8ceafda691146823b12232b4a804b4ce74acbdc8
Several log messages showing "Failed to send dummy RTP packet." were
seen in a osmo-mgw on the field. Let's re-use the function to check and
provide more information on what's wrong to ease debugging.
Related: SYS#5498
Change-Id: Iee6ac1f4d24c131e3bf40c37e6fdc252e5208ec8
This is a preparation for next commit, where one of the function will
require an static function available before it in the file.
Moving the functions also make sense, in order to have the 3 mgcp send
functions together for more easy understanding.
This commit does small style changes to fix followint linter errors:
"""
src/libosmo-mgcp/mgcp_network.c:1036: ERROR:SPACING: space required after that ',' (ctx:VxV)
src/libosmo-mgcp/mgcp_network.c:1091: WARNING:BRACES: braces {} are not necessary for any arm of this statement
src/libosmo-mgcp/mgcp_network.c:1145: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
src/libosmo-mgcp/mgcp_network.c:1163: ERROR:ELSE_AFTER_BRACE: else should follow close brace '}'
src/libosmo-mgcp/mgcp_network.c:1204: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
src/libosmo-mgcp/mgcp_network.c:1226: ERROR:POINTER_LOCATION: "(foo*)" should be "(foo *)"
"""
Change-Id: Iff8dab942182a0d909519acddb86be75d9cda7ae
The functions add_lco and add_sdp assert when the codec string can not
be generated. This is the case when an unexpected codec is addressed in
the input parameter mgcp_msg for mgcp_msg_gen(). Even though the API
user is expected only to use the codec identifiers in mgcp_client.h the
check should not be done with an assert. Instead mgcp_msg_gen() should
just return NULL imediately.
Also all generation functions should not use magic numbers as return
codes. Instead constants from errno.h should be used. It is also
problematic that the return codes from msgb_printf are added up.
Depending. It makes more sense to use an OR operator since msgb_printf
only returns 0 or -EINVAL, so the end result will be -EINVAL if one or
more msgb_printf fail and not just a random negative value.
Change-Id: Ibb788343e0bec9c0eaf33e6e4727d4d36c100017
Related: OS#5119
The constant MGCP_DUMMY_LOAD is used ambigously. Sometimes it is used as
initalizer for an array, sometimes it is used as a single byte. Also the
name is not very expressive. Lets refactor this.
Change-Id: I21d96cefeeb647958bfa1e22a0ea030884746fad
Related: OS#4005
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
When mgcp_udp_send() is called, the memory where *buf is pointing to is
never modified. It should be marked as const.
Change-Id: Iac90de5beb19bf52586ac6ffeab9eb5152edf339
So far an mgcp_client user can get the RTP address+port information that
the MGW has returned upon a CRCX. Add this function to return the other
RTP end, i.e. address+port that the MGW was told to send RTP to.
This will be used to fix the MGCP in osmo-bsc, which so far mixes up the
two RTP ends and compares the MSC's RTP address+port with the MGW's one
and hence fails to skip unnecessary MDCX.
Change-Id: Ibb488925827d9dc0ccb1f8d6d84728745d086793
A call agent may send a CRCX to create a connection in LOOPBACK mode but
without specifiying the destination address. In those cases the MGW
should deduct the destination address from the first incoming RTP
packet.
Unfortunately this is currently blocked by an OSMO_ASSERT that checks the
current sa_familiy against the sa_family from the incoming packet. This
makes no sense since the current sa_family is still uninitalized, which
is expected and not an error since the code that follows will initalize
it.
It also makes sense not to access the osmo_sockaddr struct members
individually but rather copy the address as a wohle.
Since the event only happens once and since it is also somewhat special
it makes sense to log the event as well.
Change-Id: I2dbd6f62170a7f62e5287d04a4ee6716b8786c26
Related: OS#5123
Sending a DLCX upon FSM cleanup is not unusual. Move the log about that
DLCX to INFO, and also print the endpoint and conn identifier.
Change-Id: Id723d949f101b66fb75296d01489d9dac350c7c8
If the mgcp_client_fsm gets terminated in ST_DLCX_RESP, it has already
sent a DLCX to the MGW. So do not send a second one.
I noticed the duplicate DLCX for the same endpoint conn identifier while
running TTCN3 tests and watching the network trace of test teardown.
Change-Id: I35e415f67946b73c74408afe265618cfe4f72b0b
With just one E1 line, the 'show mgcp' command outputs
several hundred lines to the vty. Add a 'active' parameter to
only show endpoints that are active.
Change-Id: I23a26b4fdc03d8b2469d293dd6c06ed83ce739e9
This is useful for affecting the 802.1Q PCP value without any separate
external packet filter rules for classification.
Change-Id: I69136c6dd114c24b1dace034e75dba5157bac37e
Depends: libosmocore.git I89abffcd125e6d073338a5c6437b9433220e1823
libosmocore If22988735fe05e51226c6b091a5348dcf1208cdf introduces
an even more convenient mechanism for specifying the DSCP of
an IP socket via OSMO_SOCK_F_DSCP()
Change-Id: If0b11dea08716ed3952a25b546b2a9bd013857bf
We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
The E1 trunk lacks the VTY commands force-realloc and rtp-accept-all.
However, the function that write the E1 trunk config includes those
commands. Also they would be applicable, so lets add those two commands
also for E1 trunks.
Change-Id: Ief2bc7502bb8d1e0f9c784d42edbe1aed5ffb728
When a trunk 0 is created (which is legal) than it is impossible to
write this trunk back to the config. The reason for this that there is
still a filtering in place from the time where trunk 0 was not allowed.
This filter needs to be extended to filter only virtual trunk 0 but not
E1 trunk 0 out.
Change-Id: Iad6b577b5a711c35f98c477351fde567d8c87298
To make clear which configuration changes (configure terminal)
apply when, add appropriate user attributes to VTY commands.
Change-Id: I2d9487801b3b78f94577264b56d217c926ef76a9
Related: SYS#4937, OS#1601
The initialization of the E1 line in mgcp_e1.c is controlled internally,
there is no need to expose the function mgcp_e1_init(), lets make it
static and remove the prefix mgcp_
Change-Id: I6aba1c55c9b1d729709ee1fba2994c77bd848a9b
The VTY command "bind early" is deprecated but it prints an error
message and the DEFUN is not set to DEFUN_DEPRECATED.
Change-Id: I594a87d2f63826a9d7b4f6a380586b08b3b79518
There exist trunk_loop commands, which sets an trunk->audio_loop
variable, however all it does is to turn on a log message. There is no
actual implementation present. Lets set the VTY commands to
DEFUN_DEPRECATED and remove the variable.
Change-Id: I72b0f8b908e32643e6e3db6ac024371b13c074a1
The error message: "abrupt FSM termination with connections still
present, sending unconditional DLCX..." implies a more serious problem
than in actually is. Even when connections are present on the
mgcp_client_fsm while it terminates, normal operation is still possible.
Lets change the loglevel to NOTICE and remove the "aprupt" from the
phrase.
Change-Id: I9749c024e208835bd4188bace13f723008de54c8
Related: SYS#5082
libosmo-mgcp-client looks up this timer in a caller provided osmo_tdef
definition. So far, all of our libosmo-mgcp-client callers do not configure
such a timer, so that we always use the default timer value.
We have introduced X timers (negative numbers) to indicate Osmocom specific
timers, and reserve T timers for 3GPP specified ones. So now is still a good
chance to move this timer to the Osmocom X realm.
Remove a comment about this timer at an unrelated place. It is still described
at osmo_mgcpc_ep_alloc().
Change-Id: If097f52701fd81f29bcca1d252f4fb4fca8a04f7
It is currently done upon receival of RTP packets in rx_rtp for pure RTP
conns, but nothing similar is done for Osmux conns, which eventually
trigger a connection time out.
Change-Id: Id592d7db7b9399a497176e0d28cc826b3bce48c0
Otherwise some state is kept, like the previous CallId, which may then
provoke issues next time the endpoint is to be used.
Change-Id: I3ac4f4542c1c8c877127c64acce6c82b458f697f
MDCX may provide a new remote address, which means we may need to update
our announced IP addr and re-bind our local end. This can happen for
instance if MGW initially provided an IPv4 during CRCX ACK, and now MDCX
tells us the remote has an IPv6 address.
Change-Id: Iaed424e2c209e1753e1f579752fc684aaad7a512
It doesn't make sense to call the function several times since anyway we
are only binding during
allocate_port()->mgcp_bind_net_rtp_port()->bind_rtp()->mgcp_create_bind()->osmo_sock_init2().
Let's better calculate the local IP addr once and use that stored value.
THis is a previous step towards next commit updating the local IP addr
and re-bindng if encessary.
Change-Id: I803b99c5e5fe0f92a5bf6796d8c25df88d1608e6
This commit allows for fully IPv6 systems to work fine. However, if a
remote endpoint still wants to use IPv4, it will fail since at this
point osmo-mgw still doesn't re-bind the local end of the connection to
an IPv4 after having initially bound it to an IPv6 one. This kind of
scenarios get fixed in next commits.
TODO: really bind the socket if a different IP address is requested.
Change-Id: I8ed94bd3f674f498e6ba315f44a351fff9c1be15
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
This is needed in case MGW changes the local IP address (for instance
because it initlaly offered an IPv4 address, and a client submitted a
remote IPv6 address, so MGW needs then to offer a local IPv6 address for
the RTP connection to be possible).
Change-Id: Ie964412b81fe6e10914790baaea724ca5f772adc
The API and related implementation fields are not used internally nor
externally, and only support IPv4. Let's simply deprecate the API and
drop all the uneeded implementation.
Change-Id: I905d4c4efabb6b4a4bc5c02e956808777243cadc
Existing mgcp_client_test code required the '.' to trigger the same code
path, since with this commit we do extra checks and without a dot the
address is not accepted as IPv4 by osmo_ip_str_type().
Change-Id: I936bf57d37f5f0607dfe7fc66c37e424c3793f9b
The VTY default for the number of endpoints is 32. This is sufficient
for small setups and lab testing, but for medium sized setupts the limit
might be reached soon. Lets increase the default to 512 virtual endpoints.
Change-Id: I55605ea083565b6950d0820e3f72c50c9dc19ffa
Related: OS#4711
The struct member trunk->e1.line is never set. Also it is always
possible to use e1inp_line_find() to get a pointer to the e1.line.
Lets remove it.
Change-Id: Id4ff52285917ce3885b8dad3a16270999c9da0aa
The E1 timeslot initalization may fail silently in the last steps. There
is an error code returned, but no log lines are printed. This can make
debugging difficult.
Change-Id: I9aab17fc1ba6666c81b14035a8f1f17e5a55adaf
It contained name from a different program, probably due to main.c being
copied over during project start.
Change-Id: I4bfa40eec0277705f5d3335d779bff35518470a8
Due to the internal handling of the trunks it was not possible to allow
an E1 trunk that has the ID 0. However this limitation is no longer
present, so we now can allow an E1 trunk with ID 0.
Change-Id: I302c2007628f607033686e277c407232351e66ad
Related: OS#2659
When endpoints become unavailable when MDCX/CRCX/DLCX are executed on
them a major problem may be the cause, lets make sure that those events
are logged.
Change-Id: I059b7e29f960e75a53bfb5dfb2b83ab3d79e84f3
The function e1inp_line_update() is called without assigning its return
code to the rc variable.
Change-Id: Ia72ea2dca210b038766151d547f66b7b7139a2c4
Fixes: CID#212160
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
The function allocate_port() has pointer a variable end, it even does an
OSMO_ASSERT on it, but it never uses it. Lets remove it.
Change-Id: I369361389c6276e5511c683ebd630093713bdd37
This problem was noticed while running several LCLS test cases from
ttcn3-bsc-test. Every test case makes osmo-bsc leak at least two
chunks named 'struct mgcp_response_pending'.
Here is the related osmo-bsc output with additional debug messages:
DRLL ERROR mgcp_client_fsm.c:525 MGCP_CONN(to-MSC)[0x612000016120]{ST_READY}:
MGW/DLCX: abrupt FSM termination with connections still present,
sending unconditional DLCX...
DLMGCP DEBUG mgcp_client.c:1010 mgcp_client_next_trans_id(id=35): new trans ID
DLMGCP DEBUG mgcp_client.c:918 mgcp_client_pending_add(id=35): allocated and queued
DLMGCP DEBUG mgcp_client.c:962 Queued 53 bytes for MGCP GW
DLMGCP DEBUG mgcp_client.c:725 Tx MGCP: r=127.0.0.1:2427<->l=127.0.0.1:2727:
len=53 'DLCX 35 rtpbridge/1@mgw MGCP 1.0\r\nC: 5\r\nI:'...
DLMGCP ERROR mgcp_client.c:704 Failed to read: r=127.0.0.1:2427<->l=127.0.0.1:2727:
111='Connection refused'
The MGCP client FSM enqueues a DLCX from its fsm_cleanup_cb(), and
terminates. Thus if the remote MGCP peer becomes unavailable (e.g.
due to a network failure), we would never get a response, and since
the FSM is already terminated, nobody would pop and free() the
response handler from the queue (mgcp->responses_pending).
As a simple workaround, let's avoid allocating dummy entries of
'struct mgcp_response_pending' without a response handler. The
only case where an MGCP message is sent without a handler is
exactly during the FSM termination.
Change-Id: I83938ff47fa8570b8d9dc810a184864a0c0b58aa
Related: OS#4619
Instead of numerous arguments (buf, len and context data), use a msgb, like
most other osmo programs do, with a msb->cb pointing at a context data struct.
This opens the future for adding/stripping IuUP header data from the msgb
easily.
(Checked to pass current ttcn3-mgw-tests.)
Change-Id: I3af40b63bc49f8636d4e7ea2f8f83bb67f6619ee
Philipp Maier
Neels Hofmeyr
Neels Hofmeyr
Pau Espin
Keith Whyte
Harald Welte
Vadim Yanitskiy