libosmocore required version increased due to include used from
libosmo-netif including an include from libosmocore which in previous
versions misses including an include from a symbol used.
Change-Id: I1d5f14b1ad36b2ed94343fca71fdc622424403d3
This way we can avoid the runtime overhead of checking whether or not
it is initialized over and over again. It also brings this code more
in line with other users of osmo_fsm_register().
Change-Id: Ia73ba8e46c13d925e88203e08a8966839e573183
API doc: require osmo_fsm_set_dealloc_ctx().
mgcp_client during delete: do not reparent the FSM when it is already
terminating.
I have recently discovered a vulnerability: if an endpoint FSM deallocates
during event handling of a successful MGCP response, this causes a
use-after-free; and once that is fixed, a state change on the already
terminated FSM causes a pointer corruption by using already cleaned data
structures. osmo_fsm_set_dealloc_ctx() fixes the use-after-free, and
osmo_fsm_set_term_stops_actions() fixes the pointer corruption.
Related: Ib7fce7b7d54dfb87af97544796680919e5929a50 (osmo-bsc),
I08c03946605aa12e0a5ce8b3c773704ef5327a7a (osmo-msc)
Depends: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78 (libosmocore),
I0adc13a1a998e953b6c850efa2761350dd07e03a (libosmocore)
Change-Id: I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3
SDP is an optional part of MGCP messages. Do not fail when there is no SDP part.
Practically this is useful to compose simpler MGCP responses from TTCN3 tests.
osmo-mgw itself always includes SDP, so there is no real impact on operating
libosmo-mgcp-client with osmo-mgw from osmo-bsc or osmo-msc.
Change-Id: I608001626459ea72415fb142f857550bbb90c683
If an API user only has access to the ci FSM (which is managed via an opaque
struct), provide this function to obtain the backpointer to the parent endpoint
FSM, mostly to be able to call osmo_mgcpc_ep_cancel_notify() on it.
osmo-msc's rtp_stream FSM will use this in
I351bb8e8fbc46eb629bcd599f6453e2c84c15015.
Change-Id: I14f7a46031327fb2b2047b998eae6ad0bb7324ad
There is a use-after-free problem if a 'notify' FSM as passed to
osmo_mgcpc_ep_ci_request() deallocates before the notify event has been
dispatched. To avoid that, add API to allow cancelling a notify.
Change-Id: I41687d7f3a808587ab7f7520f46dcc3c29cff92d
In case the ep gets deallocated during event dispatch, move all ci[] cleanup to
*before* dispatching a DLCX OK event. Afterwards, it might become a
use-after-free.
Change-Id: Ib2032e5566e465c02a9a525ccd38f9dcc84fb669
Upcoming patches introduce copying notify information. Prepare by combining
notify info into a separate sub-struct.
Change-Id: I47c0dd112011b8cb4dc88e8efd010466d4ba6308
If an MGCP operation on one conn of an endpoint fails, no longer carry out
other pending requests for that endpoint. Only allow pending DLCX to be sent.
If the caller schedules two CRCX at the same time, the first CRCX is sent with
a wildcarded endpoint name like "rtpbridge/*@mgw". Only when the OK for that
returns an allocated endpoint, will the second CRCX be sent, using that actual
allocated endpoint name. But, if the first CRCX fails, then we should not send
another wildcard CRCX, but rather assume both as failed.
Since a failed MGCP message means that the endpoint becomes unusable /
undefined and typically deallocates directly, we can actually discard all other
pending requests except for DLCX.
Change-Id: Icb1d485224bb486b84eff6329f0bd95932e63246
During FSM instance cleanup, a DLCX message composition may fail if a preceding
received MGCP message was missing parameters. If that occurs, don't crash, just
log an error and deallocate.
Change-Id: Ic1c3c4deeb4703b60e870af9d5d7be216a87fff8
If a ptmap appears in the SDP, always store it in the ptmap array. No longer
attempt to drop entries if they match the conventional payload type number.
- One reason is that the past code only matched full explicit "FOO/8000/1"
strings, while the channel number "/1" can be omitted to imply 1; by simply
storing everything received in the SDP, there is no need to add complexity
to match both "FOO/8000" and "FOO/8000/1".
- The other reason is to rather parse exactly what was received, instead of
filtering entries, to take away a degree of implied magic.
Change-Id: I2a69c21e68c602daf804744212d335ab1eafd81b
- move the error logging up to the actual errors. Each appear only once, no
goto labels needed.
- instead of strstr("rtpmap"), use osmo_str_startswith("a=rtpmap:") to more
concisely trigger on the actual syntax of the audio parameters. Same for
"a=ptime:".
Change-Id: I730111e245da8485c1b5e8811f75d140e379cec6
Return variable specified by strtoul() is "unsigned long int". If
"unsigned int" is used, according to Coverity the return value can never
be ULONG_MAX:
CID 202173: Integer handling issues (CONSTANT_EXPRESSION_RESULT)
"pt == 18446744073709551615UL /* 9223372036854775807L * 2UL + 1UL */" is always false regardless of the values of its operands. This occurs as the logical second operand of "&&".
Furthermore, PT is 7 bit in RTP header [1], so let's avoid accepting
incorrect values.
[1] https://tools.ietf.org/html/rfc3550#section-5
Fixes: c5c1430a1c ("Catch unsigned integer MGCP parsing errors with strtoul")
Fixes: Coverity CID#202172
FIxes: Coverity CID#202173
Change-Id: Ice9eee6a252fab73dbab5ebf3cfc83c1b354fd08
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I4f7b07b77c2946e9cd6f0eeca00011bd905126dd
During MDCX state is already changed to ACTIVATING but we still want to
send the local CID back to announce that we still use same local CID.
Change-Id: If182a48743ebe03f97caf9034e49b9947014bdf9
Recent commit moved mgw_endpoint_fsm from osmo-bsc.git here as
osmo_mgcpc_ep_fsm. Some API name changes were applied to avoid
collisions, but FSM was kept and it is registered during startup with
__attribute__((constructor)). As a result, with old osmo-bsc (+tests)
try to allocate its copy of mgw_endpoint_fsm, it fails because that name
is already registered.
Fixes: 538d2c53d9
Change-Id: I694ce58baa43f536b7e594b003edc891f029aa4a
The first CRCX responds with the actual MGW endpoint name that is assigned (at
least for rtpbridge/*@mgw requests).
If multiple CRCX are scheduled at the same time on a fresh MGW endpoint, both
get fired with a '*' and each creates a separate MGW endpoint.
Make mgcp_client_endpoint_fsm avoid this, and schedule only one CRCX at first,
and the rest once the MGW endpoint name is fixated. It is thus possible to
safely issue two osmo_mgcpc_ep_ci_request() at the same time.
Change-Id: I92a9944acc96398acd6649f9c3c5badec5dd6dcc
Move mgw_endpoint_fsm from osmo-bsc here as osmo_mgcpc_ep_fsm. Apply various
renames for consistency. Use osmo_tdef from libosmocore instead of osmo-bsc's
(so far) local T_defs API.
Change T23042 to T2427001, which is a slightly less arbitrary number and
slightly more extendable in the future (2427 corresponds to the default MGCP
port at osmo-mgw, 001 is the first MGCP timer and so far the only one).
Change-Id: I9a3effd38e72841529df6c135c077116981dea36
* Get rid of string define containing printf statements
* Split name from rest of checks to easily add new names later
Change-Id: I46e05a7a3432733976760bbf1c5deb4f7610db11
RFC3267 specifies two framing modes for AMR packets. An octet aligned
mode is specified where all fields of the AMR packets are aligned to
octet boundaries. The second framing mode is the bandwith efficient mode
where the fields are directly packed one after another.
- add paring/generation functions for related SDP fmtp parameters
- add conversion function to convert AMR payload
Depends: libosmo-netif I5b5a0fa644d8dbb1f04f9d7e35312683c7b3d196
Change-Id: I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Related: OS#3807
Add conn_mode to struct mgcp_conn_peer, to allow setting an explicit connection
mode instead of implicit MGCP_CONN_RECV_ONLY / MGCP_CONN_RECV_SEND depending on
remote RTP port presence. Default to old behavior if this is left unset.
Rationale:
For IuUP Initialization, osmo-msc currently still uses a hack at osmo-mgw to
echo the IuUP Initialization back to the sender as an ACK. For sanity checking
reasons, this is done iff the CRCX created the CI in loopback mode. So, in
order to be able to switch to the mgcp_client_fsm in osmo-msc instead of
"manual" MGCP message composition and yet still be able to support IuUP and
IuCS, we need to be able to set the conn mode upon CRCX to loopback.
If we merged the IuUP patch (which is already on a branch somewhere) to
osmo-mgw, we wouldn't bother with this patch, but adding this conn mode choice
has these benefits:
- post-IuUP-fix osmo-msc versions can interop with older osmo-mgw IuUP for
IuCS.
- It is conceivable that some MGCP clients prefer explicit conn modes instead
of the implicit MGCP_CONN_RECV_ONLY / MGCP_CONN_RECV_SEND choice. This opens
the possibility to switch between conn modes with MDCX messages.
Change-Id: I26be5c4b06a680f25f19797407ab56a5a4880ddc
So far, both osmo-msc and osmo-bsc always pass endpoint names of the form
'...@mgw' to osmo-mgw. Allow configuring the 'mgw' part.
Note that the actual way to pass a differing name is to pass a composed
'rtpbridge/*@foo' to mgcp_msg_gen() in the struct mgcp_msg. So this merely adds
a common VTY config for the domain name part, changes to clients are necessary.
- add mgcp_client_rtpbridge_wildcard() (useful for AoIP endpoints)
- add mgcp_client_endpoint_domain() (useful for SCCPlite endpoints)
- add mgcp client vty cfg 'mgw endpoint-domain NAME'
Rationale: reading pcaps becomes so much easier when each of osmo-bsc and
osmo-msc address their MGW with differing domain names. Otherwise, both will
have a '0@mgw' endpoint and it gets really confusing.
Also: our MGCP clients osmo-bsc and osmo-msc use code dup to compose the
initial 'rtpbridge/*@mgw' rtpbridge wildcard. It should be defined by this API
instead.
This will be used by:
* osmo-msc I87ac11847d1a6d165ee9a2b5d8a4978e7ac73433
* osmo-bsc I492023e9dca0233ec0a077032455d9f2e3880f78
After these, with according configuration, there can be a '0@bsc' and a '0@msc'
endpoint on two separate osmo-mgw instances:
osmo-mgw-for-bsc.cfg:
mgcp
domain bsc
osmo-bsc.cfg:
msc 0
mgw endpoint-domain bsc
osmo-mgw-for-msc.cfg:
mgcp
domain msc
osmo-msc.cfg:
msc
mgw endpoint-domain msc
There can also be '0@bsc' and '1@msc' endpoints on one single osmo-mgw instance with:
osmo-mgw.cfg:
mgcp
domain *
and same osmo-{bsc,msc}.cfg as above.
(By default, everything will still use '@mgw')
Change-Id: Ia662016f29dd8727d9c4626d726729641e21e1f8
Fix typos, use osmo_sock_get_name2() to show the tx source and target IP:port,
shorten some wording.
Depends: I8ad89ac447c9c582742e70d082072bdd40a5a398 (libosmocore)
Change-Id: Iae728192f499330d16836d9435648f6b8ed213b6
Remove public API that makes no sense anymore and is dead code.
I see the dropped API as a dead-end initial misconception of the early mgcp
client, and it doesn't really make sense to drag this stuff along. It has not
been used by osmo-msc,-bsc for a long time now, and just confuses the reader.
It is public API, yes, and older versions of osmo-msc / osmo-bsc will not be
able to compile against this, but even if it did, the resulting MGCP client
would not work with the current osmo-mgw: this API is still based on the
premise that the MGCP client dictates the MGW endpoint numbers, a concept that
cannot be used with the current osmo-mgw. Instead, osmo-mgw expects a
wildcarded endpoint upon CRCX and assigns its own endpoint names.
Also, the bts-base configuration is unused and a legacy of when osmo-bsc_mgcp
had explicit BTS and CN sides.
Change-Id: I98a9f1f17a1c4ab20cea3b08c7d21663592134d6
If the vty client enters multiple local / remote addresses, that leaks talloc
memory of the previously set addresses. Free those first, if any, using
osmo_talloc_replace_string().
Change-Id: I331b3d53b5eb330b87d798f952077a043674d409
mgcp_do_write() is the final stage of writing data towards the MGCP server
(MGW). In that function, drop an unconditional iteration and copy of the MGCP
message to a static string buffer for no apparent reason besides debug logging.
Instead, use osmo_escape_str() with a limited length, which can just be an
inline format argument in the LOGP() statement. This way, the string mangling
is simpler and only gets run when DMGCP is actually on debug log level.
Change-Id: Id6877ed7fd7dbe009b2ece8792d5160d040c1aaa
So far, MGCP_CONN_ID_LENGTH was often used as exactly the length of the
Connection Identifier. To indicate this length as a maximum, introduce the
MGCP_CONN_ID_MAXLEN and use it everywhere. Keep the old name as an alias.
Change-Id: I1117003c7614e98535d5c201d002e459c01bdc3f
Instead of just silently truncating the conn ID if it is too long, rather
verify its length and return an error where applicable.
Adjust expected test output.
Change-Id: If2a1aab1f13e771a6705c430e3c75bd42477a23b
The change Ie51cc86e90ffeca5b66bcb8f6db0d389241abe57 has replaced the
functions make_crcx_msg_bind() and make_crcx_msg_bind_connect() with
make_crcx_msg() and add_audio(). When a bidirectional connection is
needed, the user calls add_audio() to add the remaining connection
details. Unfortunately add_audio() leaves the conn_mode struct member
unchanged. Which means the connection is still at MGCP_CONN_RECV_ONLY,
which will instruct the MGW not to forward any of the received packets.
- Make sure that conn_mode is set to MGCP_CONN_RECV_SEND when
add_audio() is called.
Change-Id: Id12de37797de5af5cc447642d2fbb1af7de680df
Closes: OS#3511
The format is
CRCX ...
C: ...
M: ...
X-Osmo-IGN: C
So far the only ignorable element is C, i.e. the CallID. Any other items may be
added in the future.
(I initially intended to also add '@' to ignore the endpoint name's domain
part, but in the osmo-mgw code base the domain part is verified long before any
additional headers are even parsed, so sparing that refactoring for now.)
The intention is that osmo-bsc will issue "X-Osmo-IGN: C" for all SCCPlite
calls, because we are unable to retrieve the CallID that the MSC sends to
osmo-mgw for the network side of the endpoint.
Testing with a specific SCCPlite MSC, I actually observe that all CallIDs are
1, even for concurrent calls. So, an alternative hacky solution would have been
to always pass CallID == 1 for SCCPlite connections from osmo-bsc.
Related: I257ad574d8060fef19afce9798bd8a5a7f8c99fe (osmo-bsc)
Change-Id: Id7ae275ffde8ea9389270cfe3db087ee8db00b51
Both make_crcx_msg_bind() and make_crcx_msg_bind_connect() were mostly
identical. Rather, compose the CRCX bits in one common function and just add
the audio bits in another.
Prepares cosmetically for adding X-Osmo-IGN header.
Change-Id: Ie51cc86e90ffeca5b66bcb8f6db0d389241abe57
When the user has set a local port for the mgcp client we want the
client to exit if this port is already occupied. If no port is set the
IETF default port is configured automatically. When we find this port
occupied we try up to 100 times the next port to find a useable port.
Since the for loop that controls the attempts always sets the port
config it uses for its checks it will mistakenly assume that the user
has set a port on the second cycle.
- Make sure we only check for the default port in the first cycle
Change-Id: Ic1fd1018d68fcac94961321615bfdd726465532d
The IETF has designated port 2727 for call agents (clients). This
works as long as only one call agent is running. As soon as two
call agents (e.g. osmo-bsc and osmo-msc) run on the same machine.
The port numbers will collide.
To avoid such a situation we will first try the IETF port and if
we fail to use it we increment the port number until we found a
usable port. However, we should only do this if the user has not
configured a non standard port. (The rationale behind this is that
if there is a non standard port configured the choice must have
been made conciously by the user and therefor we should fail hard
so that the user gets aware of the problem.)
Change-Id: Iaa5f41fdb43ec6bf4feaefa174fd82622e37d4d0
Related: OS#2874
The regular version of the mgcp_client supports the configuration of of
custom payload types. In case some corner cases require a specific
dynamic paylod type number that is not according to 3GPP standards has
to be used the user can override the standard settings. However the fsm
based variant of the mgcp_client does not have that feature but it
should have it as well.
- add struct members for ptmap config.
- pass configuration values down to the underlying magcp client.
Change-Id: If176a3719dd9e888da16196d5fc0bdb53cc2a5f2
Related: OS#2728
Related: OS#3384
The current implementation does not support any way to influence the
codec that is negotiated via SDP or LCO. The client statically
negotitates AMR on an invalid payload type number. Also we ignore
any codec information in the responses.
- Add struct members to allow setting of user defined codec information.
- Add struct members to retrieve parsed codec info from responses.
- Add code to generate codec information in SDP
- Add code to parse SDP codec info in MGCP responses
Change-Id: I78e72d41b73acfcb40599a0ff4823f17c3642059
Related: OS#2728
Related: OS#3334