The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
The rate counter definition (enums) are still in mgcp.h.
Lets move them to mgcp_ratectr.h since it makes more sense
to keep them there.
Change-Id: Id37f66673bc20f9c2cc47a6b44cdfe75f728b936
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
The config under the node mgcp is written with an indentation that has
one space too much.
Change-Id: I2aefeaf3d7ad4a98b7bfcdc7cbc1ce6ebcbe0537
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
When a trunk is selected that does not exist, a new one is created. In
this case the VTY would print an error message but the function exits
early. The code that would print the error is unreachable.
Change-Id: Ie8c3b083174eb8209df2c06f65db6d7bbfaa87f7
fixes: CID#210637
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
The logging defines LOGPCONN and LOGPENDP are currently located in
mgcp_internal.h. However, there are specific header files for conn
(mgcp_conn.h) and endpoint (mgcp_endp.h) related stuff. Lets put LOGPCON
into mgcp_conn.h and LOGPENDP in mgcp_endp.h
Change-Id: I25ff37ee8108c27d169d294fd16ddcdde9b00195
I wanted to use gerrit to merge v1 of
I8d58281e1ff898638293c9e8cb000329462c7a70, but gerrit merged v2
nevertheless :(
Change-Id: I7b16912e66e91f0c30716e4ea1181b39906bacc1
struct mgcp_config contains a function pointer realloc_cb, which is
never popoulated nor used anywhere in the code. Lets remove it
Change-Id: I8d58281e1ff898638293c9e8cb000329462c7a70
Remove OpenSUSE bug report link, set version to @VERSION@, make it build
with CentOS 8 etc.
Related: OS#4550
Change-Id: I1d03ac87a7d0c3c600d187f3e485cb2dab8838bb
Not having a second leg of an MGCP endpoint is a normal situtation
and can't be treated as an ERROR message, especially not as an ERROR
message logged on every RTP packet. This happens routinely at
the beginning of call setup and we get tens of ERROR messages in
the logs for every call.
Change-Id: If741a742208772bda4e59236345d7ae650368d5a
New define is available since libosmocore 1.1.0, and we already require
1.1.0, so no need to update dependenices.
Let's change it to avoid people re-using old BSC_FD_* symbols when
copy-pasting somewhere else.
Change-Id: I9b6463af713f76c06a144bdbf202c0d91eef4d21
Right now a lot of errors with MGCP processing are invisible in rate
counters which makes them difficult to trace or even notice in
a production environment. E.g. reaching a limit of MGCP endpoints
is completely invisible even though it's a critical opertion alarm.
Change-Id: I6db68f044255c927dfd534fed880e405ec3ed4d6
Before this patch rate counters started right after trunk information
with no visual separation which was quite confusing. We're adding
a new line and a header to warn a user of the section change.
Change-Id: I3943def03ab821b05ac597f40bdfa4a3a71ddca3
As pointed out at https://github.com/libexpat/libexpat/issues/312
libtool does not play nice with clang sanitizer builds at all.
For those builds LD shoud be set to clang too (and LDFLAGS needs the
sanitizer flags as well), because the clang compiler driver knows how
linking to the sanitizer libs works, but then at a later stage libtool
fails to actually produce the shared libraries and the build fails. This
is fixed by this patch.
Addtionally LD_LIBRARY_PATH has no effect on conftest runs during
configure time, so the rpath needs to be set to the asan library path to
ensure the configure run does not fail due to a missing asan library,
i.e.:
SANS='-fsanitize=memory -fsanitize-recover=all -shared-libsan'
export CC=clang-10
ASANPATH=$(dirname `$CC -print-file-name=libclang_rt.asan-x86_64.so`)
export LDFLAGS="-Wl,-rpath,$ASANPATH $SANS $LDFLAGS"
Change-Id: I2314ef45e6f588e88d5aab8213cc7b5cdef11325
The example config bind the MGW to a random ip-address, lets use the
loopback address here, this will suit cases where osmo-bts runs on the
same machine as the MGW (nitb). For all other cases were an external BTS
is used the ip-address still needs to be changed.
Change-Id: Iae52c671c48953ea6b52b18c5d77347343cde0df
Enlarge the MGCP client workqueue maximum limit by factor 100.
During Abis load testing, a BSC trying to DLCX 200 conns at the same time hit
the limit of 10 very very quickly, and everything broke down.
Change-Id: I8980cce37bae0757828b28455b25c77bcb6316d0
We used to update only the per-connection rx/tx packet/byte counters
on-the-fly, but not the per-trunk global counters. The latter would
only be updated at the end of a connection. As MGCP connections
can last quite long (think of a long phone call) this is maybe
not the best of ideas.
Note: The all_rtp:err_tstmp_in and all_rt:err_tstmp_out are still
only updated at the end of a connection.
Change-Id: Ib3866cb8149d3257fcf39733846c97c33881c4ee
Related: OS#4437
OsmoMGW has a lot of nice built-in statistics (rate_ctr,...) but it
seems the only way to look at them is via the VTY. While libosmocore
contains automatic exposure of all rate counters via CTRL, the CTRL
interface simply is not used by osmo-mgw so far.
Closes: OS#4441
Change-Id: I7ed6bdb9f4749c24ca11a5905a620546cfe42952
If a config file doesn't have a 'number endpoints' config line,
we would use -1 as unsigned integer and end up with
number endpoints 4294967295
if the config file is re-written
Change-Id: I05a3814117b1d6e0cdc30740da31709ce333df4b
Closes: OS#4034
libosmocore required version increased due to include used from
libosmo-netif including an include from libosmocore which in previous
versions misses including an include from a symbol used.
Change-Id: I1d5f14b1ad36b2ed94343fca71fdc622424403d3
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I48f4c2c520e8285aff5d6d65f95bd041c13466e8
This way we can avoid the runtime overhead of checking whether or not
it is initialized over and over again. It also brings this code more
in line with other users of osmo_fsm_register().
Change-Id: Ia73ba8e46c13d925e88203e08a8966839e573183
API doc: require osmo_fsm_set_dealloc_ctx().
mgcp_client during delete: do not reparent the FSM when it is already
terminating.
I have recently discovered a vulnerability: if an endpoint FSM deallocates
during event handling of a successful MGCP response, this causes a
use-after-free; and once that is fixed, a state change on the already
terminated FSM causes a pointer corruption by using already cleaned data
structures. osmo_fsm_set_dealloc_ctx() fixes the use-after-free, and
osmo_fsm_set_term_stops_actions() fixes the pointer corruption.
Related: Ib7fce7b7d54dfb87af97544796680919e5929a50 (osmo-bsc),
I08c03946605aa12e0a5ce8b3c773704ef5327a7a (osmo-msc)
Depends: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78 (libosmocore),
I0adc13a1a998e953b6c850efa2761350dd07e03a (libosmocore)
Change-Id: I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3
SDP is an optional part of MGCP messages. Do not fail when there is no SDP part.
Practically this is useful to compose simpler MGCP responses from TTCN3 tests.
osmo-mgw itself always includes SDP, so there is no real impact on operating
libosmo-mgcp-client with osmo-mgw from osmo-bsc or osmo-msc.
Change-Id: I608001626459ea72415fb142f857550bbb90c683
If an API user only has access to the ci FSM (which is managed via an opaque
struct), provide this function to obtain the backpointer to the parent endpoint
FSM, mostly to be able to call osmo_mgcpc_ep_cancel_notify() on it.
osmo-msc's rtp_stream FSM will use this in
I351bb8e8fbc46eb629bcd599f6453e2c84c15015.
Change-Id: I14f7a46031327fb2b2047b998eae6ad0bb7324ad
There is a use-after-free problem if a 'notify' FSM as passed to
osmo_mgcpc_ep_ci_request() deallocates before the notify event has been
dispatched. To avoid that, add API to allow cancelling a notify.
Change-Id: I41687d7f3a808587ab7f7520f46dcc3c29cff92d
In case the ep gets deallocated during event dispatch, move all ci[] cleanup to
*before* dispatching a DLCX OK event. Afterwards, it might become a
use-after-free.
Change-Id: Ib2032e5566e465c02a9a525ccd38f9dcc84fb669
Upcoming patches introduce copying notify information. Prepare by combining
notify info into a separate sub-struct.
Change-Id: I47c0dd112011b8cb4dc88e8efd010466d4ba6308
If an MGCP operation on one conn of an endpoint fails, no longer carry out
other pending requests for that endpoint. Only allow pending DLCX to be sent.
If the caller schedules two CRCX at the same time, the first CRCX is sent with
a wildcarded endpoint name like "rtpbridge/*@mgw". Only when the OK for that
returns an allocated endpoint, will the second CRCX be sent, using that actual
allocated endpoint name. But, if the first CRCX fails, then we should not send
another wildcard CRCX, but rather assume both as failed.
Since a failed MGCP message means that the endpoint becomes unusable /
undefined and typically deallocates directly, we can actually discard all other
pending requests except for DLCX.
Change-Id: Icb1d485224bb486b84eff6329f0bd95932e63246
During FSM instance cleanup, a DLCX message composition may fail if a preceding
received MGCP message was missing parameters. If that occurs, don't crash, just
log an error and deallocate.
Change-Id: Ic1c3c4deeb4703b60e870af9d5d7be216a87fff8
Currently in handle_create_con(), mgcp_conn_alloc() is called with NULl
ctx. As soon as this ctx is changed to be part of the trunk's endpoint
array (tcfg->endpoints), test will segfault because some fds from
previous tcfg are still registered after the whole tcfg object was freed
with talloc_free() by previous test. That's because
mgcp_endpoint_release() must be called on all endpoints to make sure all
registered components are correctly unplugged.
Related: OS#3950
Change-Id: I813d52b518ed0bb8db4e42dff83e040b0891fee2
If a ptmap appears in the SDP, always store it in the ptmap array. No longer
attempt to drop entries if they match the conventional payload type number.
- One reason is that the past code only matched full explicit "FOO/8000/1"
strings, while the channel number "/1" can be omitted to imply 1; by simply
storing everything received in the SDP, there is no need to add complexity
to match both "FOO/8000" and "FOO/8000/1".
- The other reason is to rather parse exactly what was received, instead of
filtering entries, to take away a degree of implied magic.
Change-Id: I2a69c21e68c602daf804744212d335ab1eafd81b
Philipp Maier
Harald Welte
Oliver Smith
Alexander Chemeris
Pau Espin
Eric Wild