This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
Existing mgcp_client_test code required the '.' to trigger the same code
path, since with this commit we do extra checks and without a dot the
address is not accepted as IPv4 by osmo_ip_str_type().
Change-Id: I936bf57d37f5f0607dfe7fc66c37e424c3793f9b
Due to the internal handling of the trunks it was not possible to allow
an E1 trunk that has the ID 0. However this limitation is no longer
present, so we now can allow an E1 trunk with ID 0.
Change-Id: I302c2007628f607033686e277c407232351e66ad
Related: OS#2659
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
Instead of numerous arguments (buf, len and context data), use a msgb, like
most other osmo programs do, with a msb->cb pointing at a context data struct.
This opens the future for adding/stripping IuUP header data from the msgb
easily.
(Checked to pass current ttcn3-mgw-tests.)
Change-Id: I3af40b63bc49f8636d4e7ea2f8f83bb67f6619ee
Some of the unit-tests initalize a second trunk (trunk2) but the test
never do anything with this trunk. Lets remove it.
Change-Id: I228aa45160152091baac9d9c2e6486b774278b6a
Related: OS#2659
At the moment the number of possible E1 endpoints (depends on the number
of E1 timeslots that should be used) is hardcoded and the configuration
of the number of virtual endpoints has an off-by-one problem.
For the E1 timeslots one might choose not to occupy all E1 timeslots of
once. A one TRX E1 BTS usually requires 3 E1 timeslots. One as D-Channel
timeslot and two to cover the voice channels. The voice channels
timeslots need to be set up in osmo-mgw, while the D-Channel timeslot
must not be touched. The VTY config needs to be able to reflect that.
Change-Id: I73b31e3c236a61ea0a6f76ef5ff98ce589f52c77
Related: OS#2547
The test assumes that the endpoint "rtpbridge/X@mgw" is at array
position X in many places. This does not necessarly have to match.
Accessing the array elements directly was the prefered way when the MGW
did use integer numbers and not strings to identify endpoints. Since the
endpoint name strings are used to access the endpoints the unit-test
should also reflect this.
Lets replace the integer variable last_endpoint with a string variable
and do related verifications based on strings.
Change-Id: Ic950c427f23be4a792af94972554637c2b0fbdf2
Related: OS#2659
mgcp_client.h offers functions to generate endpoint names for wildcarded
request. This is used in osmo-bsc, lets now also add a function that can
generate e1-endpoint names.
Change-Id: Iec35b5bae8a7b07ddb3559f7114a24dcd10e8f14
Related: OS#2547
The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
The E1 trunk number is currently not parsed, whenever a trunk prefix is
detected that indicates an E1 trunk, then the entire request is
rejected.
Parse the trunk number and select the trunk accordingly
Related: OS#2547
Change-Id: Ifdaab953544151e73b58cc3e95d21afdb40765f4
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
SDP is an optional part of MGCP messages. Do not fail when there is no SDP part.
Practically this is useful to compose simpler MGCP responses from TTCN3 tests.
osmo-mgw itself always includes SDP, so there is no real impact on operating
libosmo-mgcp-client with osmo-mgw from osmo-bsc or osmo-msc.
Change-Id: I608001626459ea72415fb142f857550bbb90c683
Currently in handle_create_con(), mgcp_conn_alloc() is called with NULl
ctx. As soon as this ctx is changed to be part of the trunk's endpoint
array (tcfg->endpoints), test will segfault because some fds from
previous tcfg are still registered after the whole tcfg object was freed
with talloc_free() by previous test. That's because
mgcp_endpoint_release() must be called on all endpoints to make sure all
registered components are correctly unplugged.
Related: OS#3950
Change-Id: I813d52b518ed0bb8db4e42dff83e040b0891fee2
In codecs_same(), do not compare the complete audio_name. The parts of it are
already checked individually:
- subtype_name ("AMR"),
- rate ("8000"; defaults to 8000 if omitted) and
- channels ("1"; defaults to 1 if omitted)
So by also checking the complete audio_name, we brushed over the match of
implicit "/8000" and "/8000/1", which otherwise works out fine.
As a result, translating payload type numbers in RTP headers now also works if
one conn of an endpoint set an rtpmap with "AMR/8000" and the other conn set
"AMR/8000/1".
It seems to me that most PBX out there generate ptmaps omitting the "/1", so
fixing this should make us more interoperable with third party SDP.
See IETF RFC4566 section 6. SDP Attributes:
For audio streams, <encoding parameters> indicates the number
of audio channels. This parameter is OPTIONAL and may be
omitted if the number of channels is one, provided that no
additional parameters are needed.
Also allowing to omit the "/8000" is a mere side effect of this patch.
Omitting the rate does not seem to be specified in an RFC, but is logical for
audio codecs defined to require exactly 8000 set as rate (most GSM codecs).
Add tests in mgcp_test.c.
Change-Id: Iab00bf9a55b1847f85999077114b37e70fb677c2
Instead of manually entering codec values, use mgcp_codec_add() to populate
test conns with codecs. The idea is to better test what actually happens when
parsing SDP codec strings.
Rewrite current test_mgcp_codec_pt_translate() from procedural to a data model
with human readable stdout logging.
This prepares to enable interpreting codec strings like "FOO/8000/1" as
equivalent with "FOO/8000": the SDP standard defines the final "/1", indicating
the nr of channels, as optional for a single channel, but osmo-mgw currently is
unable to match these two formats as identical. So prepare the
test_mgcp_codec_pt_translate() so that upcoming patches can incorporate strings
with and without the final "/1" by extending the struct arrays.
Change-Id: I888000d77512cfecb0f199b86ef6003e7fc0e6cb
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I51dc1cdcbe2a5587769335fbecb5039ef22cae5d
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I4da93dfc69b5585a197a7e201a1afb72c2f97030
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I48252415f9d0cd985ad097f334aa4c1665f52511
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: Ic28a5eacc4c441d68e8a20d2743956ab2e01125d
* Cleanup naming to make it far more clear
* Drop 2 variables holding CID values (allocated_cid, cid), in favour of
1 value holdinf the value and one bool stating whether the value is
used.
* Change conn_osmux_allocate_cid to allow allocating either next
available CID or a specific one, in preparation for forthcoming patches.
This commit can be merged straight away because anyway osmux cannot be
enabled in current status (blocked by vty config) and
(conn_)osmux_allocate_cid was/is not called anywhere. However, it helps
improving code base for future re-introduction of Osmux as it is
envisioned.
Change-Id: I737a248ac6c74add8e917fe2e2f36779d0f1d685
RFC3267 specifies two framing modes for AMR packets. An octet aligned
mode is specified where all fields of the AMR packets are aligned to
octet boundaries. The second framing mode is the bandwith efficient mode
where the fields are directly packed one after another.
- add paring/generation functions for related SDP fmtp parameters
- add conversion function to convert AMR payload
Depends: libosmo-netif I5b5a0fa644d8dbb1f04f9d7e35312683c7b3d196
Change-Id: I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Related: OS#3807
Add a watchdog timer to connections, and close these connections when
the watchdog timer expires. Kick the watchdog whenever RTP messages or
the relevant MGCP messages arrive. Add the currently remaining timeout
to "show mgcp stats" in the VTY.
This feature is disabled by default, as it is incompatible with LCLS
(connections in LCLS state appear to be inactive). Enable it with the
new "conn-timeout" VTY setting. In general, this feature can be used to
work around interoperability problems causing connections to stay open
forever, and slowly exhausting all available ports. This happened for
various reasons already.
MDCX is the only relevant MGCP message:
- CRCX creates the conn and timer
- DLCX deletes the conn and timer
- MDCX is the only remaining supported MGCP message that indicates a CI
- Can't easily generically parse a CI for all MGCP messages, parsing is
done in handle_modify_con().
Related: OS#3429
Change-Id: I18886052e090466f73829133c24f011806cc1fe0
So far, both osmo-msc and osmo-bsc always pass endpoint names of the form
'...@mgw' to osmo-mgw. Allow configuring the 'mgw' part.
Note that the actual way to pass a differing name is to pass a composed
'rtpbridge/*@foo' to mgcp_msg_gen() in the struct mgcp_msg. So this merely adds
a common VTY config for the domain name part, changes to clients are necessary.
- add mgcp_client_rtpbridge_wildcard() (useful for AoIP endpoints)
- add mgcp_client_endpoint_domain() (useful for SCCPlite endpoints)
- add mgcp client vty cfg 'mgw endpoint-domain NAME'
Rationale: reading pcaps becomes so much easier when each of osmo-bsc and
osmo-msc address their MGW with differing domain names. Otherwise, both will
have a '0@mgw' endpoint and it gets really confusing.
Also: our MGCP clients osmo-bsc and osmo-msc use code dup to compose the
initial 'rtpbridge/*@mgw' rtpbridge wildcard. It should be defined by this API
instead.
This will be used by:
* osmo-msc I87ac11847d1a6d165ee9a2b5d8a4978e7ac73433
* osmo-bsc I492023e9dca0233ec0a077032455d9f2e3880f78
After these, with according configuration, there can be a '0@bsc' and a '0@msc'
endpoint on two separate osmo-mgw instances:
osmo-mgw-for-bsc.cfg:
mgcp
domain bsc
osmo-bsc.cfg:
msc 0
mgw endpoint-domain bsc
osmo-mgw-for-msc.cfg:
mgcp
domain msc
osmo-msc.cfg:
msc
mgw endpoint-domain msc
There can also be '0@bsc' and '1@msc' endpoints on one single osmo-mgw instance with:
osmo-mgw.cfg:
mgcp
domain *
and same osmo-{bsc,msc}.cfg as above.
(By default, everything will still use '@mgw')
Change-Id: Ia662016f29dd8727d9c4626d726729641e21e1f8
Remove public API that makes no sense anymore and is dead code.
I see the dropped API as a dead-end initial misconception of the early mgcp
client, and it doesn't really make sense to drag this stuff along. It has not
been used by osmo-msc,-bsc for a long time now, and just confuses the reader.
It is public API, yes, and older versions of osmo-msc / osmo-bsc will not be
able to compile against this, but even if it did, the resulting MGCP client
would not work with the current osmo-mgw: this API is still based on the
premise that the MGCP client dictates the MGW endpoint numbers, a concept that
cannot be used with the current osmo-mgw. Instead, osmo-mgw expects a
wildcarded endpoint upon CRCX and assigns its own endpoint names.
Also, the bts-base configuration is unused and a legacy of when osmo-bsc_mgcp
had explicit BTS and CN sides.
Change-Id: I98a9f1f17a1c4ab20cea3b08c7d21663592134d6
The Connection Identifier is defined as a hex string, so clients may send the
ID back with or without leading zeros. Ignore all leading zeros when comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier with
leading zeros removed, which would mismatch pefore this patch.
Extend test_conn_id_matching() in mgcp_test.c to include leading zero tests.
Now, mgcp_conn_get() would match a valid id with *any* amount of leading zeros,
even if that far surpasses the permitted conn id length. Valid lengths of
incoming conn ids should be and is checked elsewhere.
Related: OS#3509
Change-Id: If55a64a2da47b6eff035711c08e4114d70dbec91
The Connection Identifier is defined as a hex string, so clients may send the
ID back in lower case. Convert to upper case before comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier in lower
case, which would mismatch pefore this patch.
Add test_conn_id_matching() in mgcp_test.c to verify case insensitivity.
Cosmetic: use strcmp(), not strncmp(). In the presence of a terminating nul as
we can assume here, this makes no functional difference, but it clarifies the
code.
Related: OS#3508
Depends: Ib0ee1206b9f31d7ba25c31f8008119ac55440797 (libosmocore)
Change-Id: I8e52278c3abe9e9c8c848c2b1538bce443f68a43
MGCP_CONN_ID_MAXLEN actually includes a terminating nul, so we need to compare
strlen() against MGCP_CONN_ID_MAXLEN-1.
Log the length if it is too long.
Add MDCX_TOO_LONG_CI test to mgcp_test.c, testing a conn id of 33 characters.
Before this patch, the test returns error code 515 meaning "not found", while
now it returns 510 meaning "invalid", showing the off-by-one. Same is
illustrated by the error log ("not found" before, "too long" now), but the
error log is not verified by mgcp_test.c.
Change-Id: I8d6cc96be252bb486e94f343a8c7cae641ff9429
Instead of just silently truncating the conn ID if it is too long, rather
verify its length and return an error where applicable.
Adjust expected test output.
Change-Id: If2a1aab1f13e771a6705c430e3c75bd42477a23b
Add a full length (32 characters according to spec) conn ID in a CRCX response,
as well as a too long one.
The too long one is currently silently truncated, a subsequent patch will
improve on that (If2a1aab1f13e771a6705c430e3c75bd42477a23b).
Change-Id: I5f2d52f086ea2d330fcce88a176488ace972bf79
The separator between MGCP and SDP section is typically "\r\n\r\n". For some
reason the test so far used "\n\n" instead, rather use the standard separator.
Change-Id: I41c73722e5fae00663bcf96de0b57b7155809a06
I want to test arbitrary length Conn IDs ('I:'), and hence don't want to pass
the conn_id as int, but rather just include it in the message string. Prepare
for that by eliminating the extra conn_id arg and just pass a params string.
Change-Id: Ib2e718dda3aa1f6e9979dee823d973dd002e2318
This function is set on conn ID length of 32 characters. Make it detect a
shorter length also when parsing 'o=-' headers. Before, this failed to
recognize a space as the end of the conn ID, now sees any non-hex char as end.
Related: OS#3507
Change-Id: I762c273bac172acb6d0aae6ea6267603ab654cbf
Flip logic to accurately log whether an 'I:' is included, instead of logging
the opposite.
Note that it isn't possible to log the actual conn ID, because they are random
and differ in every test run, which would collide with the fixed expected
output file mgcp_test.ok.
Change-Id: Idcd731b9daf618b97d8f7e6a776266071cd29e08
Adjust the X-Osmo-IGN parsing to use string tokens instead of parsing single
characters.
Reconsidering the first implementation as a poor choice, rather specify the
format of X-Osmo-IGN as any-length string tokens separated by spaces, which is
more flexible and more future proof.
See also osmo-gsm-manuals If15a88c3b5b40fd1d24ad0f94f3231f678669ab1 which
defines the X-Osmo-IGN format as string tokens, matching this patch.
In mgcp_test, add an unknown X-Osmo-IGN item. Though the output is not checked
by the testsuite.at, running manually shows the error log about the unkown
X-Osmo-IGN item.
Change-Id: Ia6fe5ead4b601931c1bf41b29fc1b237aac37d2c
Pau Espin
Philipp Maier
Neels Hofmeyr
Harald Welte
Eric Wild
Oliver Smith