osmo-mgw/openbsc/include/openbsc/mgcp_internal.h

234 lines
5.4 KiB
C
Raw Normal View History

/* MGCP Private Data */
/*
* (C) 2009-2012 by Holger Hans Peter Freyther <zecke@selfish.org>
* (C) 2009-2012 by On-Waves
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <osmocom/core/select.h>
#define CI_UNUSED 0
enum mgcp_connection_mode {
MGCP_CONN_NONE = 0,
MGCP_CONN_RECV_ONLY = 1,
MGCP_CONN_SEND_ONLY = 2,
MGCP_CONN_RECV_SEND = MGCP_CONN_RECV_ONLY | MGCP_CONN_SEND_ONLY,
MGCP_CONN_LOOPBACK = 4 | MGCP_CONN_RECV_SEND,
};
enum mgcp_trunk_type {
MGCP_TRUNK_VIRTUAL,
MGCP_TRUNK_E1,
};
struct mgcp_rtp_stream_state {
uint32_t ssrc;
uint16_t last_seq;
uint32_t last_timestamp;
uint32_t err_ts_counter;
int32_t last_tsdelta;
uint32_t last_arrival_time;
};
struct mgcp_rtp_state {
int initialized;
int patch_ssrc;
uint32_t orig_ssrc;
uint16_t base_seq;
int seq_offset;
int cycles;
int32_t timestamp_offset;
uint32_t packet_duration;
uint32_t jitter;
int32_t transit;
struct mgcp_rtp_stream_state in_stream;
struct mgcp_rtp_stream_state out_stream;
};
struct mgcp_rtp_end {
/* statistics */
unsigned int packets;
unsigned int octets;
unsigned int dropped_packets;
struct in_addr addr;
/* in network byte order */
int rtp_port, rtcp_port;
/* per endpoint data */
int payload_type;
uint32_t rate;
int channels;
uint32_t frame_duration_num;
uint32_t frame_duration_den;
int frames_per_packet;
uint32_t packet_duration_ms;
char *fmtp_extra;
char *audio_name;
char *subtype_name;
int output_enabled;
int force_output_ptime;
/* RTP patching */
int force_constant_ssrc; /* -1: always, 0: don't, 1: once */
int force_aligned_timing;
void *rtp_process_data;
/*
* Each end has a socket...
*/
struct osmo_fd rtp;
struct osmo_fd rtcp;
int local_port;
int local_alloc;
};
enum {
MGCP_TAP_BTS_IN,
MGCP_TAP_BTS_OUT,
MGCP_TAP_NET_IN,
MGCP_TAP_NET_OUT,
/* last element */
MGCP_TAP_COUNT
};
struct mgcp_rtp_tap {
int enabled;
struct sockaddr_in forward;
};
struct mgcp_lco {
char *string;
char *codec;
int pkt_period_min; /* time in ms */
int pkt_period_max; /* time in ms */
};
enum mgcp_type {
MGCP_RTP_DEFAULT = 0,
MGCP_RTP_TRANSCODED,
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
MGCP_OSMUX_BSC,
MGCP_OSMUX_BSC_NAT,
};
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
#include <openbsc/osmux.h>
struct mgcp_endpoint {
int allocated;
uint32_t ci;
char *callid;
struct mgcp_lco local_options;
int conn_mode;
int orig_mode;
/* backpointer */
struct mgcp_config *cfg;
struct mgcp_trunk_config *tcfg;
/* port status for bts/net */
struct mgcp_rtp_end bts_end;
struct mgcp_rtp_end net_end;
/*
* For transcoding we will send from the local_port
* of trans_bts and it will arrive at trans_net from
* where we will forward it to the network.
*/
struct mgcp_rtp_end trans_bts;
struct mgcp_rtp_end trans_net;
enum mgcp_type type;
/* sequence bits */
struct mgcp_rtp_state net_state;
struct mgcp_rtp_state bts_state;
/* fields for re-transmission */
char *last_trans;
char *last_response;
/* tap for the endpoint */
struct mgcp_rtp_tap taps[MGCP_TAP_COUNT];
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
/* osmux is enabled/disabled */
int osmux;
/* osmux internal to unbatch messages for this endpoint */
struct osmux_out_handle osmux_out;
};
#define ENDPOINT_NUMBER(endp) abs(endp - endp->tcfg->endpoints)
struct mgcp_msg_ptr {
unsigned int start;
unsigned int length;
};
int mgcp_send_dummy(struct mgcp_endpoint *endp);
int mgcp_bind_bts_rtp_port(struct mgcp_endpoint *endp, int rtp_port);
int mgcp_bind_net_rtp_port(struct mgcp_endpoint *endp, int rtp_port);
int mgcp_bind_trans_bts_rtp_port(struct mgcp_endpoint *enp, int rtp_port);
int mgcp_bind_trans_net_rtp_port(struct mgcp_endpoint *enp, int rtp_port);
int mgcp_free_rtp_port(struct mgcp_rtp_end *end);
/* For transcoding we need to manage an in and an output that are connected */
static inline int endp_back_channel(int endpoint)
{
return endpoint + 60;
}
struct mgcp_trunk_config *mgcp_trunk_alloc(struct mgcp_config *cfg, int index);
struct mgcp_trunk_config *mgcp_trunk_num(struct mgcp_config *cfg, int index);
void mgcp_rtp_end_config(struct mgcp_endpoint *endp, int expect_ssrc_change,
struct mgcp_rtp_end *rtp);
uint32_t mgcp_rtp_packet_duration(struct mgcp_endpoint *endp,
struct mgcp_rtp_end *rtp);
void mgcp_state_calc_loss(struct mgcp_rtp_state *s, struct mgcp_rtp_end *,
uint32_t *expected, int *loss);
uint32_t mgcp_state_calc_jitter(struct mgcp_rtp_state *);
/* payload processing default functions */
int mgcp_rtp_processing_default(struct mgcp_endpoint *endp, struct mgcp_rtp_end *dst_end,
char *data, int *len, int buf_size);
int mgcp_setup_rtp_processing_default(struct mgcp_endpoint *endp,
struct mgcp_rtp_end *dst_end,
struct mgcp_rtp_end *src_end);
void mgcp_get_net_downlink_format_default(struct mgcp_endpoint *endp,
int *payload_type,
const char**subtype_name,
const char**fmtp_extra);
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
enum {
MGCP_DEST_NET = 0,
MGCP_DEST_BTS,
};
#define MGCP_DUMMY_LOAD 0x23