The standard osmo VTY terminology is 'remote-ip', 'remote-port', 'local-ip',
'local-port'. Conform to that. osmo-hnbgw is so far not rolled out widely, so
it makes sense to do this now.
Change-Id: Ifda2653bf58044552a5f1477cd7008dec3fb9100
Add the option to allow UE Register Requests with a TMSI identity.
Add VTY command to enable this option, 'hnbap-allow-tmsi'.
Add hnbgw_tx_ue_register_acc_tmsi().
HNBGW so far keeps track of UEs that have registered, with their IMSI. When a
UE registers with only a TMSI, we obviously can't store an IMSI. However, since
we're so far never *using* the list of UEs in osmo-hnbgw, we might as well just
accept the TMSI registration and carry on as usual. All that is needed for
proper operation is a valid UE context.
This is aimed at the ip.access nano3G femto cell, as it apparently feeds
whichever identification the UE sends through to HNBAP (TMSI+LAI, pTMSI+RAI),
instead of an IMSI as expected. So far this caused failures and the need to
make the UE clear its TMSI (wait several minutes or attempt to subscribe to a
different network), so that UE registration switched back to IMSI. When simply
accepting the TMSI in osmo-hngw, no problems are apparent in our current code
state.
For example, a Samsung Galaxy S4 seems to send a UE_Identity_PR_tMSILAI (CS
identity), and a GT-I9100 seems to send a UE_Identity_PR_pTMSIRAI (PS identity)
upon first registration to the network.
Recording the IMSI in hnbgw: we could use the subscriber list during paging, to
page a UE on only its last seen HNB. On the other hand, it doesn't hurt to
anyway always page to all HNBs connected to osmo-hnbgw. The paging procedure
does include a page-to-all-HNBs in case the first HNB paging fails. But we must
be aware that UEs that register by TMSI will simply not have an IMSI recorded
in the list of UE contexts, so a lookup based on IMSI may fail.
Patch-by: Harald Welte <laforge@gnumonks.org>, me
Change-Id: I87bc1aa3e85815ded7ac1dbdca48f1680b468589
To prepare for an upcoming commit that accepts TMSI identification upon UE
Register Requests:
Add tmsi arg to ue_context_alloc().
Add ue_context_by_tmsi().
This is aimed at the ip.access nano3G femto cell, as it apparently feeds
whichever identification the UE sends through to HNBAP (TMSI+LAI, pTMSI+RAI),
instead of an IMSI as expected.
See the upcoming commit that enables accepting TMSI identities for further
detail.
Change-Id: I138458443319cc4cbea5ee7906cf5dd72d582130
This came up while fixing 'make distcheck'; this is certainly not the easiest
way but it makes sense to have the headers in include/, like we do in openbsc.
The easy alternative might be to add -I$(top_srcdir)/src to src/Makefile.am.
Remove -I$(top_srcdir)/src from src/tests/Makefile.am, no longer needed.
Change-Id: I5a82e029dcdc4df0a60a31271a4883393fe59234
fix extraneous rebuild for each make invocation: touch the ranap.stamp file in
src/ as the make target suggests.
fix for 'make distcheck': ranap gen: move generated sources to builddir, not
srcdir. Thus we also -I the builddir include to pick up those headers.
hnbap and rua have the same situation as ranap (they generate numerous files
from a single make rule). Use the same makefile semantics for those two
(commit for ranap gen omitted the same changes for hnbap and rua).
The generated headers are thus moved to include/osmocom/*/, so adjust #include
statements accordingly (*_common.h, *_ies_defs.h).
Also move hnbap_common.h to include/osmocom/hnbap and rua_common.h to
include/osmocom/rua, since the *_ies_defs.h want to include them; and since
*_ies_defs.h are now in include/osmocom/*, we want a '<foo>' include now.
Also adjust gitignore.
Change-Id: I32213666fcdfc144008fa7d46497c0938d093e86
Add use_x213_nsap arg to ranap_new_msg_rab_assign_voice() and
new_transp_info_rtp(). Pass this to new_transp_layer_addr() to compose 32bit
addresses when use_x213_nsap == false.
This is analogous to ranap_new_msg_rab_assign_data().
Particularly, the ip.access nano3G does not accept x213 NSAP 56bit addresses,
so we want to send 32bit addresses there.
Change-Id: I0c3c95d709c8a2b1c48d7a187faca34102226329
Add include/osmocom/iuh/ named after this project (osmo-iuh), and add vty.h to
define VTY node enum values. Also add (to) Makefile.am and configure.ac to
include in the build.
An upcoming commit will add the actual first config item to the hnbgw/iuh node.
Change-Id: I71545823d3bd81cb888c85df8e298a56c98bf131
The formerly existing make rule caused a race condition in parallel builds and
wrongly stated the .c files as targets, which caused make to execute the
rule twice (once for each target). This was actually only fallout of the
attempt to express the fact that those two files are generated by the rule.
The generated file ranap_ies_defs.h was moved by one make job, another
job then tried to access the file in the old location and failed.
parallel build verified with:
$ for i in $(seq 1 10)
do
echo "XXXX iteration $i"
git clean -xfd
autoreconf -i
./configure
make -j${i} || break
done
Coauthored by Andreas Rottmann <mail@rotty.xx.vu>
Change-Id: I439edcb4b7742de861c99ed401114f51061f8088
Reviewed-on: https://gerrit.osmocom.org/65
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Allow the *caller* of ranap_new_msg_rab_assign_data() to make the decision for
using 32 bit or longer IP addresses in RAB Assignment Request messages.
This requires a follow-up change in openbsc branch sysmocom/iu.
A bit hacky: the ranap_ies_defs.h is generated together with the
ranap_encoder.c and ranap_decoder.c. See comments in src/Makefile.am and
include/osmocom/ranap/Makefile.am.
Do all remaining changes necessary for a working build.
Add Makefile.am files in include/... subdirs.
Remove noinst_HEADERS directives from src/*/Makefile.am, but keep the headers
list to feed to move-asn1-header-files.sh.
Adjust all #includes in src/*_common.h and elsewhere. In hnbap_common.h,
separate the ASN.1 "primitive" headers from the others, and include them
without a subdir path, as before.
Neels Hofmeyr
Neels Hofmeyr
Alexander Huemer
Daniel Willmann
Harald Welte