osmo-gsm-tester

History

Pau Espin 317cdf64e2 default-suites.conf: Make sure we use fr codec with IPA dyn TS IPA style dynamic timeslots (TCH/F_PDCH) support only TCH/F and thus only full rate codecs are to be used. On the other hand, OSMO style dynamic timeslots (TCH/F_TCH/H_PDCH) can use both full rate and half rate, so no need to be restrictive there. Change-Id: I0039ef60b323ed72cfe00d8fd9e9287e9c82d49f		2018-10-30 16:24:25 +01:00
..
scenarios	default-suites.conf: Make sure we use fr codec with IPA dyn TS	2018-10-30 16:24:25 +01:00
README.txt	put the example suite in /example, not /selftest/real_suite	2017-05-04 16:42:50 +02:00
default-suites.conf	default-suites.conf: Make sure we use fr codec with IPA dyn TS	2018-10-30 16:24:25 +01:00
defaults.conf	defaults.conf: Set valid default codec_list matching avail TS types	2018-10-29 17:47:01 +01:00
paths.conf	paths: have one common parent dir /var/tmp/osmo-gsm-tester	2017-05-11 17:39:02 +02:00
resources.conf.prod	osmo-bts-trx: Add support for osmo-trx-lms	2018-10-10 09:39:58 +00:00
resources.conf.rnd	osmo-trx: Enable multi_arfcn for B200 and only in multiTRX setup	2018-10-02 15:58:32 +02:00

README.txt

This a real gsm test suite configured and ready to use.
The only thing missing is a trial dir containing binaries.

You can point osmo-gsm-tester.py at this config using the OSMO_GSM_TESTER_CONF
environment variable:

    export OSMO_GSM_TESTER_CONF="$PWD"

When there is no OSMO_GSM_TESTER_CONF set, osmo-gsm-tester will instead look
for conf files in several locations like ~/.config/osmo-gsm-tester,
/usr/local/etc/osmo-gsm-tester, /etc/osmo-gsm-tester.

If you have your trial with binary tar archives in ~/my_trial
you can run the suite for example like this:

    osmo-gsm-tester.py ~/my_trial

Specifically, from this dir:

    OSMO_GSM_TESTER_CONF="$PWD" ../src/osmo-gsm-tester.py ~/my_trial

Alternatively you can setup this example as permanent config using something
like:

    mkdir -p ~/.config
    ln -s "$PWD" ~/.config/osmo-gsm-tester

A ./state dir will be created to store the current osmo-gsm-tester state. If
you prefer not to write to $PWD, set up an own configuration pointing at a
different path (see paths.conf: 'state_dir').