This way we get rid of object related content in resource.py and we can
finally move it to core/ in next commit.
Change-Id: Ia5b861115ae3ae1b90149863c4265dcc730b8cd4
This way we benefit from:
* knowing which attributes are used/required by each object class and
subclass
* Having validation function definitions near the class going to use them
Change-Id: I8fd6773c51d19405a585977af4ed72cad2b21db1
similar to the eNB patches this fixes the CA and MIMO radio
parameters. In pricinple this could also be reused for the
AmarisoftUE but since we currently don't have a means to test
it I left it for a future commit.
Change-Id: I16b00009f97d61a9ab4715e5d727024661d3d0be
this patch moves the rf_dev_args creation for both eNB types
into the eNB base class, since they are identical.
the patch also fixes the arguments for all CA and MIMO configurations
Change-Id: I8ca3ed83e65dc07927385267e5970bc4f5b120d5
The B200 device being used in the physical setup doesn't support several
RF ports, so let's hardcode it to 0 for now.
Change-Id: Id4c31be2bd0c75f469e2293ade011c7b7ceedb1c
Two implementations are provided:
* Amarisoft Ctrl interface (websocket)
* Mini-Circuits Programmable Attenuator (HW, HTTP API) [1]
in Amarisoft ENBs, if no rfemu is configured explicitly, the Ctrl
interface one is used by default, while still being possible to use the
HW one.
[1] https://www.minicircuits.com/pdfs/RC4DAT-6G-60.pdf
Change-Id: Ie98a3fb9bcd2b87b96ecbb5b79e0f53981892a32
Recent commit changed the import line so it runs only when required, but
added a typo making tests uing it fail.
Change-Id: Id3e5c16adc763a9b79cc464937c541abd15f98de
Fixes: 2b959580b9
This way we avoid unconditionally importing all subclass dependencies,
and make them optional based on whether the setup has devices of that
type or not.
Change-Id: I0d2f8b26364b45f0d837cc51078784d1d0fa7ea1
this allows to optionally specify a the GTP bind_address for a enb object
in the resources.conf
this address is then used for binding the listening socket for gtp connections
which, in turn, allows to run the enb and epc on the same host.
when gtp_bind_addr is not specified, addr is used by default
this is especially useful if eNB and EPC run on the same host
and ZMQ is used for RF between eNB and UE. Two eNB addresses
are needed in this case, one bind address and one "remote-accessable"
address for the UEs ZMQ radio to connect to
Change-Id: I4fe38f31401428ed3e74e1d0b64960f0af122d37
Some older iperf3 versions don't support the --logfile arg. Let's
instead parse the json from stdout. Old --logfile behavior is left in
code but disabled since it's a nicer (less hacky) way to get results,
because parsing from stdout means we need to avoid reading some content.
Change-Id: Ia1b7fa4dae074089878963aeddf0006aea68e31f
For some reason these classes were still not inheriting from the base
class (probably because it was added after they existed) and they
started failing after recent changes which presumed they where already
inheriting.
Change-Id: I88217baf490ec45373d0743585377ed2639a8cfd
Use the ifup script to set up the netns + configure the tun device
created by lteue. Use it also as a hook to know when the UE is attached.
Since tun setup is done by arch-optimized lte-avx(2) binaries, we also
need to give capabilitites to them (instead of allowing inheritance of
caps in general in the setcap script).
Change-Id: I1e228b1296eac8e4cb183c2faa735b0468abe124
Commit 12ae6d79a5 switched the rf_dev_type
to be in lowercase but forgot to change these conditions.
Change-Id: I91d3877381b4e6343dc4aa0465e699341ed6648d
the Amarisoft UE seems to be only working with UHD when the bandwidth
param is provided. It seems the set_bandwidth() API is used.
Change-Id: I3f20a5a8ca80c63374f0ad500fd2794e2dc45479
this commit adds basic support for configuring measurements in the
eNB config. It currently support A1, A2, and A3 events.
By default UE measurements are turned off and need to be enabled by
configuring an event with:
+mod-enb-meas-event@{name},{report_type},{value},{hysterisis},{time to trigger}
For example one can update the a2 and a3 event with:
+mod-enb-meas-event@a2,rsrq,-40,2,480+mod-enb-meas-event@a3,rsrp,6,1,512
Change-Id: Ia7657be2396886840570bc41645450a268b4cfff
the num_carriers is parsed as a string in the conf dict and therefore
needs to converted to int before matching
also changed the num_carriers to be of type UINT
Change-Id: I1386812d32e1181ba666720bbb875bf9bbce0f51
the num_cells modifier allows to create multiple cells in a single enb
both cells are by default configured for CA
Change-Id: Ie9f16ce06ee56002c01097f2d338278f09ea4337
This allows selecting modem by supported network type. It will allow
using 4G modems with type different than srsue in 4g suite in the future.
Change-Id: I38bcf6abf789f52c3ed0bee7911567fa872e2491