This is an auxiliary example config file, which should not be installed
to /etc/ and hence not be in OSMOCONF_FILES
This fixes the following rpm packaging error:
[ 149s] error: Installed (but unpackaged) file(s) found:
[ 149s] /etc/osmocom/sgsnemu.conf
Change-Id: Id31f6542590405531ff61a9434041c15e779865b
Fixes: Icd6f3efcf5a9ef50237a3d0a76d4cce55051f447
This is an auxiliary example config file, which should not be installed
to /etc/ and hence not be in OSMOCONF_FILES
This fixes the following rpm packaging error:
[ 149s] error: Installed (but unpackaged) file(s) found:
[ 149s] /etc/osmocom/osmo-ggsn-kernel-gtp.cfg
Change-Id: If118ed26491a1edda83eda7f95479e165ca4c150
Fixes: I6fbe8a8e55bad41532e9aed3cf71ebebffdcee52
Add a copy of osmo-ggsn.cfg, with gtpu-mode set to kernel-gtp and apn
inet6 and inet46 removed (as the kernel module only supports ipv4).
Related: OS#3209
Change-Id: I6fbe8a8e55bad41532e9aed3cf71ebebffdcee52
Remove ggsn_vty_reference from the source tree.
In manuals/Makefile.am use the new BUILT_REFERENCE_XML feature recently added
to osmo-gsm-manuals, and add a build target to generate the XML using the new
osmo-ggsn --vty-ref-xml cmdline switch.
Change-Id: I772293cc78a6c95e07565a7048c1c8dadf87d2fc
Depends: I613d692328050a036d05b49a436ab495fc2087ba
Related: OS#5041
The example config for osmo-sgsn suggests to use 127.0.0.6 as bind ip.
(the ip-address where the SGSN tries to connect) Lets use 127.0.0.2
instead to match the default config of osmo-sgsn.
Change-Id: I513ab64896dee47fd92dbc5ef495fe1c6e734ec3
The default configuration has a random ip-address as first DNS server.
This might cause unnedessary trouble for people who try osmo-ggsn the
first time. Lets have some public DNS here, just to be sure.
Change-Id: I5876a806185bb3aea356fb6996d1925b8d0d1758
"An address '192.168.7.1' is specified without prefix length. The behavior
of parsing addresses without prefix length will be changed in the future
release. Please specify prefix length explicitly."
Change-Id: I51777c6344191182fb87bae6f0048ce422802541
This patch is quite big because implementing echo req/resp and recovery
requires having knowledge and managing differentiated state for each GSN
peer attached/connected to osmo-ggsn. This kind of information was not
available in osmo-ggsn nor in libgtp.
So osmo-ggsn is now able to track GSN peers connected to a
ggsn_ctx (associated gsn_t from libgtp) by means of "sgsn_peer" data
structure, and accessible from the ggsn through a list. The instances of
sgsn_peer are currently allocated and destroyed dynamically based on
discovered peer who have at least a pdp context attached to us (we are
not interested in peers without pdp contexts because we don't need to
send echo requests/responses and maintain state in that case).
A new private pointer (pdp_t->priv) data structure struct pdp_priv_t is
added to be able to relate a pdp_t to an sgsn as well as the already
existing pointer to an apn.
An "echo-interval <0-36000>" VTY command is added which allows
configuring time wait between echo requests being sent to each
sgsn_peer. Transmission of echo requests is disabled by default.
Finally, a new "show sgsn" VTY command is introduced, and its output is
also printed during "show ggsn".
Related: OS#4165
Change-Id: Id2c84165dc59dff495106758146a701ca488834f
Other similar commands already do it. This way we also get rid of
deprecated APIs, supporting search when more than one GSN is set up.
Related: OS#2873
Change-Id: I8357e20076348c8ded5e9f5b8e7252566b0fbfea
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I14533676d5774ee0d0ee5054ba77d7dac32cff43
Apply VTY reference changes from libosmocore: change node IDs from index
numbers to meaningful names from VTY node prompts.
Introduce section with common commands, do not repeat the common commands on
each child node.
Populate section names (so far empty).
Add apn / gpdu VTY reference.
This is generated using the recent libosmocore vty doc patches that conclude in
libosmocore change-id Iedd67750539b676271de0e0e9316d4e6f794406a.
Change-Id: Ia269c4bda0aa0b905abcccc75338f5f808e01727
To omit whitespace changes in an upcoming patch that updates the VTY reference
and will use '\n' line breaks, convert line breaks from '\r\n' to '\n' without
any other changes.
Change-Id: Id0d1a3a82c3d670cbb041884554b5d79fdfb0f28
Add examples for 'ip addr add' and mention correspondence to config file,
add examples for enabling masquerading and IP forwarding,
place the non-root config in its own section and highlight the diffs.
Add tiny hint at systemd-networkd.
Change-Id: I02bd9cfa35c7f2fb338d5d92c2e968fe80574a78
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
* Some people want to manually create/configure their tun devices,
show them how to do this using ip with the correct parameters
* Let's not call the network device 'ggsn' but rather 'apn0', as
the device has a 1:1 correspondence to the APN, not to the GGSN.
Change-Id: I2fef818bfcb8cb521397136539f492922d5f6def
Osmocom has maintained this program since about 7 years now, while
the original author / copyright holder has completely disappeared.
With the introduction of Osmocom-style CTRL and VTY interfaces,
the way how the program is used and configured has substantially
changed. In order to avoid confusion in terms of configuration file
format etc, let's rename it to OsmoGGSN.
Change-Id: I2da30f7d4828e185bfac1a4e2d8414b01cbe4f9d
All those will be re-generated by "autoreconf -i" anyway, so
there's no point in keeping them in the repository.
Also, the 'bootstrap' script is no longer working with recent
autotools versions anyway.
Harald Welte
Oliver Smith
Pau Espin
Philipp Maier
Vadim Yanitskiy
Daniel Willmann