We do not install any libraries so we don't need it: most likely it's a
forgotten leftover from pre-split repo time.
Change-Id: Ifabb26d1e6384659789061bc2abe23cb5ceca4cb
This requires I414e67a3de733fab407161b3264d3b89070ba537 in libosmocore
to avoid warning about discarded const.
Change-Id: Ie92637dd900b0f9eba891d5aad0b4ba0ee69c08c
Add new environment variables WITH_MANUALS and PUBLISH to control if
the manuals should be built and uploaded. Describe all environment vars
on top of the file.
When WITH_MANUALS is set, install osmo-gsm-manuals like any other
dependency and add --enable-manuals to the configure flags (for "make"
and "make distcheck"). Add the bin subdir of the installed files to
PATH, so osmo-gsm-manuals-check-depends can be used by ./configure.
Related: OS#3385
Change-Id: Ic45322c809f9f65d0fd24b828dab0cd929fa6267
Set AM_DISTCHECK_CONFIGURE_FLAGS in Makefile.am instead of
DISTCHECK_CONFIGURE_FLAGS. This is the recommended way from the
automake manual, as otherwise the flag can't be changed by the user
anymore.
Related: OS#3718
Change-Id: I5bf96adcf06f1844ffc888d8690d2cc0df48e3f9
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I0477d7c871413bd90b365d3064bac3cba23a0883
This is the first update since the libosmocore changes to the 'show
online-help' generated output. Hence the produced document now benefits from
the structural improvements:
- not repeating common commands for every node;
- using section names that match the VTY prompt.
Drop most of the sgsn_vty_additions.xml -- they merely repeat what the online
VTY doc already explains. Many of these more verbose explanations have been
absorbed into the VTY online doc in osmo-sgsn.git change-id
I35984014424412e91437b7ed71576aef3819cb1e.
Adjust remaining sgsn_vty_additions.xml to match the new node ID scheme.
Change-Id: I71863e5056ad369d2055e9882a52a00fa999ab04
Since the NITB split, GSUP is used in all three network elements, so
make the protocol a shared chapter
Change-Id: Id2d7c27ef16eb0ebe5f60d625a1fcf42f1603f4f
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
Reserve a new IE for the charging characteristics. We need to handle
them as a GGSN might otherwise reject the PDP context creation. For
the SGSN it is enough to send the two octets as it.
Pick the 0x1X range for the IEs as it is used with the PDP contexts.
Change-Id: I1d7423582e154728a240cf15c32772a06822f4ad
The arrow style used to desribe the flowcharts in gsup.adoc does not match
the arrow style used in the protocol descriptions which are included from
the common directory (gb.adoc, control_if.adoc, oap.adoc). This patch changes
the arrow style to match the already existing common parts.
Change-Id: I7faa0c97ee3705a64289a47bc63f311d05f988b3
The explaination of the access policy is a bit unclear. Users
that come from osmo-nitb might have trouble to grasp the functionality
of the access control list based approack correctly.
Change-Id: Iaae3035c4de3cb082f097441eff99289ee6dfc53
Add semicoli in fig-gprs-pcubts digraph.
Remove section from GMM Implementation about non-existence of HLR.
The SGSN can access osmo-hlr via GSUP (and will have to do so in the
libvlr future).
Change-Id: I0164f418e453672321eed00bbc454c1e223ea158
Unfortunately a glob like osmo-x__*.{svg,png} doesn't work, so have the
suffixes in separate globs.
Add dashes to indicate that failure should be ignored.
Change-Id: I6bc4d9ea72b43a573acbc860c23397f748de2c7b
Generate *.check files from asciidoc output and grep for WARNINGs.
Add *.check files to gitignore and to 'make clean'.
Change-Id: Ibccc83a3415930a528f2e8e4e4dda3b81c6d0b64
The GSUP protocol has been enhanced with
* Support for UMTS AKA in 'Auth Tuple' / SAI operations
* Authentication Failure Report
* CN Domain indicator
Let's update the documentation accordingly.
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
Log line actually makes more sense out of the function where IMSI acq is
resolved. We can then get rid of msg param which may cause confusion and
add complexitiy to code for no good reason.
Change-Id: I6716a260e12a3cf36af0501ce611c6c1e608f537
It makes no sense to print every stored_msg with BVCI from msg, same for
routing. This will allow getting rid of "msg" completelly in next
commit.
Change-Id: I95eafbf41012be3e02c68fc996773dd02b174fe6
The only use inside the function is only to log information which should
actually be provided by tmp_parse_ctx of each stored msg.
Change-Id: Ic186b92fa9bd0a2b853a0cf525c6f6feb9493897
gbproxy process was aborted with following message during APN patching:
<000e> gb_proxy_patch.c:129 Patching ACT_PDP_REQ to SGSN: Replacing APN 'foo' -> 'bar'
msgb(0x5555558797d0): Sub area is not fully contained in the msg data
During osmo-sgsn 107fb59e84b12bbf6bdfdd4fc241dbcda7332706 old copy of
gprs_msgb_resize_area was replaced by more modern libosmocore version
called msgb_resize_area. They are mostly identical but the later has
some extra verification asserts. One of this asserts was triggering the
process abort, but the bug has always been there as far as I could see
in git history.
The assert triggers because the bssgp buffer and parse_ctx point to
"stored_msg", while the data buffer comes from a different msbg "msg",
which is clearly wrong behavior.
In the modified line, "msg" (the one which provided the imsi now already
stored in link_info through gbproxy_update_link_state_ul()->gbproxy_assign_imsi())
is really not needed anymore, and we want to patch the stored msg going
to be forwarded.
Related: SYS#4397
Change-Id: I7226fc5bcfbf58c349431d0a39cdb904fefd9e9c
In case of multiple bts peers we use '\n' as individual entries
separator.
This reverts commit fffd6cb0d8011442bb69974675f86ad087b7d8db.
Change-Id: I1ea17919ec3ed7e26044df8b5f8324717ee9e32c
Return number of BTS peers. This is especially useful when no peers are
available because "gbproxy-state" command returns empty sstring in this
case.
Change-Id: I29b0664e60f7c81c3c7b495c1c8f2700e3f7e033
Related: SYS#2655
In ctrl protocol we don't need any explicit formatting as it might
interfere with client processing our response. Let's drop trailing '\n'.
Change-Id: I3f32e01dd50a53991c292aeee57a78d81cdc5429
Related: SYS#2655
Coverity points out we forgot to check the return value of
osmo_shift_v_fixed() in some places. Add checks which verify
the expected length of data which is skipped by the parser.
Change-Id: I20406f411810e966443d6fd5a4620b9a66cd9809
Related: CID#135160
libosmocore commit 797558ea1768e464f9559c5f7a4f3f4285c5de25
changed the order of NS_UNBLOCK_ACK transmission dispatching
of the NS_UNBLOCK signal. Update expected output of gbproxy
tests accordingly to make these tests pass again.
Change-Id: Ia3df811755b1c88cf7a27a466677b24a6c32fd8e
Related: OS#2388
Avoid explicit memset which confuses coverity, use strnlen() and
osmo_strlcpy() to handle strings.
Change-Id: I73fd54ad3a4ab8be5aff0fee5c722597ad766e9d
Fixes: CID163626
The two existing enums defined in gprs_sndcp_xid.h, for protocol
and data compression algorithm numbers respectively, were assigned
to 'int' variables when their values were copied to other structures.
This prevented the compiler from checking the enum value coverage
during switch statements and also tripped up Coverity scans looking
for enum value mismatch problems.
So instead of copying enums to ints, make use of the enums throughout.
Structures which can contain values from both enums now use a union
of both, forcing us to be very explicit about which set of values
we are dealing with.
Change-Id: I3771a5c59f4e6fee24083b3c914965baf192cbd7
Depends: If6f3598cd6da4643ff2214e21c0d21f6eff0eb67
Depends: I8444c1ed052707c76a979fb06cb018ac678defa7
Related: CID#149102
Max
Oliver Smith
Harald Welte
Pau Espin
Philipp Maier