"127.0.0.1" is changed to "localhost" to let local NSS decide whether to
use IPv4 or IPv6. In newish systems, IPv6 ::1 will be selected since
IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail. In any case, since
the default remote address is a local one and it's the client side,
there's no real logical change since the kernel would anyway should have
taken a local address anyway.
Change-Id: I2f599e1aa449d44136ef20ba5f516ca9b61f3223
3GPP TS 48.018 Section 8.4:
> After any failure affecting the NSE, the party (BSS or SGSN) where
> the failure resided shall reset the signalling BVC. After sending or
> receiving a BVC-RESET PDU for the signalling BVC, the BSS shall stop all
> traffic and initiate the BVC-RESET procedure for all BVCs corresponding
> to PTP functional entities of the underlying network service entity. The
> BSS must complete the BVC-RESET procedure for signalling BVC before
> starting PTP BVC-RESET procedures.
TODO: We should not just trigger a single outbound BVC-RESET message,
but we should re-transmit them until we get a response. This would
likely entail adding FSMs to libosmogb, which we will leave for a later
point - it's anticipated that the NS + BSSGP code is undergoing quite
some changes in the coming months anyway, so leave it for then.
Change-Id: I0b46035b40709c38bb9ab9493c11031a577e3ee0
Closes: OS#4629
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
The osmo_ prefix should be only used for official struct/apis of libosmocore.
This commit was done via `sed -i 's/osmo_sockaddr/sgsn_sockaddr/g'`.
In prepartion of introducing a different api of osmo_sockaddr to
libosmocore.
Change-Id: Ibb1ddce9ff1ffe7494de5cdb8ea1843c45fe4566
The MS notifies movement to GMM SUSPEND state because it is for instance
handling a call and cannot use PDCH anymore. Once it releases the TCH it
will ASAP move to either dedicated mode or trigger RAU, which means it
will get out of SUSPEND state. So it doesn't make sense to try paging
the MS when in that state.
This change makes test TC_suspend_nopaging pass.
Related: OS#4616
Change-Id: Ia245899eb9f16c7f839785def4ceb721a1c3a11b
Fix the final nibble of all IMSI BCD digits to 0xf, since it is a filler digit.
The encoded IMSI has an even amount of digits (14) and must contain a 0xf
filler nibble at the end. The test data looked correct due to repeated '1'
digits.
wrong hex: 11 12 13 14 15 16 17 18
correct: 11 12 13 14 15 16 17 f8
order: 1T 32 54 76 98 ba dc Xe T = type, X = filler, 1..e = 14 digits
This error was found when applying the new osmo_mobile_identity API.
Change-Id: Ia006a3da6779ad1984f642e8ea29790a4daeb8b9
We so far only resumed from suspend upon receiving an explicit BSSGP
RESUME message from the BSS. The latter is only possible in
BSC-colocated PCU, where the BSC can trigger the message when releasing
the dedicated channel. In BTS-colocated PCUs, this is not possible,
and we have to rely on the MS resuming by RAU.
See 3GPP TS 23.060 section 16.2.1.1.1 clause 6:
The MS shall resume GPRS services by sending a Routeing Area Update Request message to the SGSN:
* if the BSS did not successfully request the SGSN to resume GPRS services,
* if the RR Channel Release message was not received before the MS left dedicated mode,
* if the MS locally determines that the conditions for the GPRS suspension have disappeared
Without this patch, the GMM state would forever be stuck in SUSPEND,
which in turn causes the SGSN to page the MS all the time.
Change-Id: I3c09187a27483d95fa0070bbb467f94a2ea3978f
Related: OS4616
As msgb ownership is not passed along, we need to free the message
buffer memory we allocate in defrag_segments() after calling
sgsn_rx_sndcp_ud_ind().
Change-Id: I1185b1aa99bb167d616eb469e5445e4ed5ad949d
Closes: OS#4603
Remove OpenSUSE bug report link, set version to @VERSION@, make it build
with CentOS 8 etc.
Related: OS#4550
Change-Id: I824b67f2d590ac2aa9f2e4fa4387a5283cf22521
At 36c3, osmo-hlr was run with a patch that records the RAN type of attached
subscribers. Even though this is not in osmo-hlr master, it is nice information
to send along.
Change-Id: I5dbe610738aed7ea1edf6b33543b1c03818cc274
This caused frequent crashes at 36c3. The "proper" fix is probably elsewhere
(lynxis mentions an unfinished patch), but at least this prevented some crashes
during active operation.
Once this is merged, we can (re)enable SGSN_Tests_Iu.TC_geran_attach_iu_rau,
which tests exactly for this scenario: A Subscriber / MM context that is so
far attached via GERAN, but now receives a RAU via UTRAN/Iu.
Closes: OS#4339
Change-Id: Ifde15dc4151d84748f0e67b32c9c260cb2d9d8fc
New define is available since libosmocore 1.1.0, and we already require
1.2.0, so no need to update dependenices.
Let's change it to avoid people re-using old BSC_FD_* symbols when
copy-pasting somewhere else.
Change-Id: Iaebd049e383b02204a12f39cc6c932a53d25fd72
/usr/bin/ld: ../../src/gtphub/gtphub.o:/home/laforge/projects/git/osmo-sgsn/src/gtphub/gtphub.c:50: multiple definition of `osmo_gtphub_ctx'; gtphub_test.o:/home/laforge/projects/git/osmo-sgsn/tests/gtphub/gtphub_test.c:57: first defined here
collect2: error: ld returned 1 exit status
See also https://alioth-lists.debian.net/pipermail/debian-mobcom-maintainers/Week-of-Mon-20200413/000653.html
Change-Id: I19c1eef6649d2747f0b624f5292d7ae47c4ca839
As pointed out at https://github.com/libexpat/libexpat/issues/312
libtool does not play nice with clang sanitizer builds at all.
For those builds LD shoud be set to clang too (and LDFLAGS needs the
sanitizer flags as well), because the clang compiler driver knows how
linking to the sanitizer libs works, but then at a later stage libtool
fails to actually produce the shared libraries and the build fails. This
is fixed by this patch.
Addtionally LD_LIBRARY_PATH has no effect on conftest runs during
configure time, so the rpath needs to be set to the asan library path to
ensure the configure run does not fail due to a missing asan library,
i.e.:
SANS='-fsanitize=memory -fsanitize-recover=all -shared-libsan'
export CC=clang-10
ASANPATH=$(dirname `$CC -print-file-name=libclang_rt.asan-x86_64.so`)
export LDFLAGS="-Wl,-rpath,$ASANPATH $SANS $LDFLAGS"
Change-Id: I7402b019c191304f639806a3c29e6bb698b398ed
Add 'cs7' default configuration, link to the
osmo-gsm-manuals/common/cs7-config.adoc chapter to fully explain the 'cs7'
client configuration.
Related: OS#2767
Depends: Ia2508d4c7b0fef9cdc57e7e122799a480e340bf7 (osmo-gsm-manuals)
Change-Id: If0f7c8fc4b94eb40b62570cf90999d5074dc00ee
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I8c07d99c1bc9f0383e4bce17544e0998998cc54d
Do not only update the VTY reference and counters of osmo-sgsn, but also
the VTY reference of gbproxy.
This was not possible with the old code path of calling "regen_doc.sh"
inside docker-playground.git, as it expects the program to be updated to
have the same name as the docker image. Using the docker-playground
script also has the disadvantage, that one must push the development
branch to git.osmocom.org before updating the VTY reference/counters,
because that script would build a new docker container with a freshly
cloned repository, check out the same commit that we have already
locally, build that and then finally regenerate the docs.
So instead of adding another parameter for the docker image to the
script in docker-playground.git and calling it twice, simplify the
process by rewriting the regen_doc.sh script in osmo-sgsn.git. Make it
start the locally installed osmo-sgsn and osmo-gbproxy binaries and
call osmo_interact_vty.py on them.
Related: OS#4292
Change-Id: I8b5bd5347ea34266ad650383372630f2a84d5cce
This adds a very basic manual consisting of nothing more than
the common chapters and a high-level description of what it is
all about.
Change-Id: I80d4ea016376c59995ccfcd8685c7c0e86745bd2
The N201 values are negotiated per SAPI, and there are default values
per each SAPI. Let's use those rather than hard-coded values.
Closes: OS#3954
Change-Id: I447a3c6dd85311772a6e219c62dc820d2726857f
Otherwise lower layers will end up using a TLLI from PTMSI which was not
yet announced to the MS if it is still not in GMM attached state, as
showcased by SGSN_Tests.TC_attach_req_id_req_ra_update.
Related: OS#3957, OS#4245
Change-Id: Ide51726abb82f5784eca4ab8d62b2ad8512be843
Output:
20191107021548500 DMM <0002> gprs_gb.c:40 MM_STATE_Gb(2596296189)[0x6120000084a0]{Idle}: Received Event E_MM_PDU_RECEPTION
20191107021548500 DMM <0002> gprs_gmm.c:1531 MM(/d4b6d7af) -> GMM RA UPDATE REQUEST type="RA updating"
20191107021548501 DMM <0002> gprs_gmm.c:1615 MM(/d4b6d7af) The MM context cannot be used, RA: 901-70-2758-208
Assert failed mmctx->gb.llme == NULL gprs_gmm.c:1620
Scenario reproducing the crash can be triggered with TTCN3
SGSN_Tests.TC_attach_req_id_req_ra_update.
Basically, SGSN first receives an ATTACH REQ with a given RA ID, then
SGSN switches to state CommonProcedureInitiated and sends GMM ID REQ,
and MS/PCU answers immediatelly with a RA Update instead with a new RA
ID.
Related: OS#3957, OS#4245
Change-Id: I64fa5cf1b427d3abb99e553e584897261a827ce6
Since osmo-ggsn.git c94837c6a401bf0f80791b619a9b4cfbe9160afd, those
APIs are a no-op since timers are tracked internally through osmocom
APIs (and at the same time, new implementation fixes some timing related
bugs).
As a result, osmo-sgsn depends now on at least that libgtp commit. Since
it's not yet avaiable on latest libgtp release, let's track it down in
TODO-RELESE to not forget to update libgtp requirements during osmo-sgsn
release.
Related: OS#4178
Change-Id: Ia9a93d4a6ed63cd0c736f9a99d81d730b958d82e
When the MS is in MM_STANDBY, the Routing Area is known,
but not the exact cell.
Start the paging procedure. (Even this is only supported
for the last known cell, not the Routing Area. Routing Area
paging is not yet supported.)
Change-Id: Icc2c6ba70f8f74054546a1e31741fc90b232a23c
GCC warns us that 'pmm_state_fsm_timer_cb' is defined but not used.
This function was introduced in [1], but was not assigned to the FSM.
[1] I66c2ac0350cb074aefd9a22c5121acf723f239d3
Change-Id: Ib040befc87b2676aad2b8fe3671404fb3f5b030b