Change the whole vty configuration for NS to be more flexible
and support more setups. Old configurations are invalid.
API change which must be synchronized with libosmocore
For further information see:
https://osmocom.org/projects/libosmocore/wiki/Network_service_(NS)
Depends-on: I8c3f2afecc74b78f7f914f7dce166cbcb63444eb (libosmocore)
Change-Id: Ie9306ab4d4738c2c57a69987086e22771b30657e
It may be useful to have 'remote' authorization policy, but do not
require authentication in GERAN at the same time, e.g. in combination
with 'subscriber-create-on-demand' feature of OsmoHLR.
This change introduces a new VTY parameter similar to the one
that we already have in OsmoMSC:
authentication (optional|required)
Please note that 'required' only applies if 'auth-policy' is 'remote'.
Change-Id: I9909145e7e0af587c28827e16301a61b13eedaa9
60 seconds is used by default, which is the minimum accepted value for
this timer as per 3GPP TS 29.060 section "7.2.1 Echo Request".
Having it low by default is good for lab use in which a lot of stuff
changes over time.
Change-Id: Ia1898d172482bf6a25d829f8fc9a47824f49456f
In SGSN, actually place the port in the SGSN config by default, so that the
gsup port may now be omitted in the VTY config (the IP address suffices).
Adjust the osmo-sgsn.cfg example.
Depends: I4222e21686c823985be8ff1f16b1182be8ad6175 (libosmocore)
Change-Id: I50f2040e2eb0baacb43849e93cfed10cbc2fc156
For the vty tests, add osmo-sgsn-accept-all.cfg (that does not need an HLR) and
use in vty_test_runner.py, otherwise the 'show sgsn' command will reply that it
could not connect to the HLR, failing the vty test which expects empty.
Change-Id: Ie3b2013198d3e2b780a4e31c36b89b58129dcacd
This helps in providing 3G software packages for the sysmoNITB hardware, which
uses 10.23.24.1 for SGSN and 10.23.24.2 for GGSN.
However, in order to not break the python tests, the osmo-sgsn.cfg example
still uses 127.0.0.1 as local address.
Change the GGSN address to 127.0.0.2, because SGSN and GGSN cannot co-exist on
the same address (the GTP port number is fixed by spec: no IE to communicate a
differing port, so it has to be the standard GTP port for both).
Change-Id: Ie3a25f6771ed6e620cb2b315638c622a9a24e530
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Alexander Couzens
Pau Espin
Neels Hofmeyr
Daniel Willmann