cellular-infrastructure
/
osmo-gbproxy
mirror of https://gerrit.osmocom.org/osmo-gbproxy
9
0
Fork 0
Code Issues Releases Wiki Activity
osmo-gbproxy/openbsc/tests/gbproxy/gbproxy_test.ok

1523 lines
36 KiB
Plaintext
Raw Normal View History

gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
===== GbProxy test START
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
--- Initialise SGSN ---
MESSAGE to SGSN at 0x05060708:32000, msg length 12
02 00 81 01 01 82 01 01 04 82 01 00
PROCESSING RESET_ACK from 0x05060708:32000
03 01 82 01 01 04 82 01 00
MESSAGE to SGSN at 0x05060708:32000, msg length 1
0a
result (RESET_ACK) = 1
PROCESSING ALIVE_ACK from 0x05060708:32000
0b
MESSAGE to SGSN at 0x05060708:32000, msg length 1
06
result (ALIVE_ACK) = 1
PROCESSING UNBLOCK_ACK from 0x05060708:32000
07
==> got signal NS_UNBLOCK, NS-VC 0x0101/5.6.7.8:32000
result (UNBLOCK_ACK) = 0
PROCESSING ALIVE from 0x05060708:32000
0a
MESSAGE to SGSN at 0x05060708:32000, msg length 1
0b
result (ALIVE) = 1
Current NS-VCIs:
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Initialise BSS 1 ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x1001(4097), NSEI 0x1000(4096)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 10 01 04 82 10 00
==> got signal NS_RESET, NS-VC 0x1001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 10 01 04 82 10 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x1001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Current NS-VCIs:
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Initialise BSS 2 ---
Setup NS-VC: remote 0x01020304:2222, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:2222
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:2222
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:2222, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 20 01 04 82 20 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:2222, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:2222
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:2222, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:2222
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:2222
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:2222, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:2222
0b
result (ALIVE_ACK) = 0
Setup BSSGP: remote 0x01020304:2222, BVCI 0x2002(8194)
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET from 0x01020304:2222
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:2222
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 20 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 20 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 20 02
MESSAGE to BSS at 0x01020304:2222, msg length 9
00 00 00 00 23 04 82 20 02
result (BVC_RESET_ACK) = 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Move BSS 1 to new port ---
Setup NS-VC: remote 0x01020304:3333, NSVCI 0x1001(4097), NSEI 0x1000(4096)
PROCESSING RESET from 0x01020304:3333
02 00 81 01 01 82 10 01 04 82 10 00
==> got signal NS_RESET, NS-VC 0x1001/1.2.3.4:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 10 01 04 82 10 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:3333
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:3333
06
==> got signal NS_UNBLOCK, NS-VC 0x1001/1.2.3.4:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:3333
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:2222
VCI 0x1001, NSEI 0x1000, peer 0x01020304:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Move BSS 2 to former BSS 1 port ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 20 01 04 82 20 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:1111
VCI 0x1001, NSEI 0x1000, peer 0x01020304:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Move BSS 1 to current BSS 2 port ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 20 01 04 82 20 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:1111
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:1111
VCI 0x1001, NSEI 0x1000, peer 0x01020304:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Move BSS 2 to new port ---
Setup NS-VC: remote 0x01020304:4444, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:4444
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:4444
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:4444, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 20 01 04 82 20 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:4444, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:4444
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:4444, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:4444
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:4444
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:4444, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:4444
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:4444
VCI 0x1001, NSEI 0x1000, peer 0x01020304:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
--- Move BSS 2 to former BSS 1 port ---
Setup NS-VC: remote 0x01020304:3333, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:3333
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_REPLACED: 0x2001/1.2.3.4:4444 -> 0x1001/1.2.3.4:3333
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 9
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
03 01 82 20 01 04 82 20 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:3333
0a
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:3333
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:3333
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:3333
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x00000000:0
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
--- Move BSS 1 to original BSS 1 port ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x1001(4097), NSEI 0x1000(4096)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 10 01 04 82 10 00
==> got signal NS_RESET, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 9
03 01 82 10 01 04 82 10 00
MESSAGE to BSS at 0x01020304:1111, msg length 1
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
MESSAGE to BSS at 0x01020304:1111, msg length 1
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 1
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
--- Reset BSS 1 with a new BVCI ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1012(4114)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 12 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 12 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 12 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 12 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 12
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 12
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 12
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 12
result (BVC_RESET_ACK) = 9
--- Reset BSS 1 with the old BVCI ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
--- Reset BSS 1 with the old BVCI again ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
--- Send message from BSS 1 to SGSN, BVCI 0x1012 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to SGSN, BVCI 0x1012, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 12
result (UNITDATA) = 4
--- Send message from SGSN to BSS 1, BVCI 0x1012 ---
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to BSS, BVCI 0x1012, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 12
result (UNITDATA) = 4
--- Send message from BSS 1 to SGSN, BVCI 0x1002 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to SGSN, BVCI 0x1012, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 12
result (UNITDATA) = 4
--- Send message from SGSN to BSS 1, BVCI 0x1002 ---
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to BSS, BVCI 0x1012, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 12
result (UNITDATA) = 4
--- Send message from BSS 2 to SGSN, BVCI 0x2002 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to SGSN, BVCI 0x2002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 20 02
result (UNITDATA) = 4
--- Send message from SGSN to BSS 2, BVCI 0x2002 ---
PROCESSING UNITDATA from 0x05060708:32000
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
MESSAGE to BSS at 0x01020304:3333, msg length 4
00 00 20 02
result (UNITDATA) = 4
--- Reset BSS 1 with the old BVCI on BSS2's link ---
Setup BSSGP: remote 0x01020304:3333, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:3333
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
result (BVC_RESET) = 26
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:3333
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4114, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add global and per peer counters This adds counters that are incremented when errors are detected. It also modifies the VTY command 'show gbproxy' so that 'show gbproxy stats' shows the counters. Sponsored-by: On-Waves ehf
2013-10-18 12:34:55 +00:00
NSEI mismatch : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add global and per peer counters This adds counters that are incremented when errors are detected. It also modifies the VTY command 'show gbproxy' so that 'show gbproxy stats' shows the counters. Sponsored-by: On-Waves ehf
2013-10-18 12:34:55 +00:00
NSEI mismatch : 1
gbproxy: Test invalid BVCI from SGSN This adds a test with a UNITDATA SGSN message that is addressed to an invalid (unknown) BVCI. The test shows, that the message is echoed to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:16 +00:00
Gbproxy global:
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
MESSAGE to BSS at 0x01020304:3333, msg length 9
gbproxy: Extended test program to simulate SGSN, too This adds a simulation of the SGSN side of the Gbproxy. The VC is set up correctly and several combinations of BSSGP messages are sent. Sponsored-by: On-Waves ehf
2013-10-18 11:04:47 +00:00
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
--- Send message from BSS 1 to SGSN, BVCI 0x1002 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to SGSN, BVCI 0x1012, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 12
result (UNITDATA) = 4
--- Send message from SGSN to BSS 1, BVCI 0x1002 ---
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 12
CALLBACK, event 0, msg length 0, bvci 0x1012
NS UNITDATA MESSAGE to BSS, BVCI 0x1012, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 12
result (UNITDATA) = 4
gbproxy: Test invalid BVCI from SGSN This adds a test with a UNITDATA SGSN message that is addressed to an invalid (unknown) BVCI. The test shows, that the message is echoed to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:16 +00:00
--- Send message from SGSN to BSS 1, BVCI 0x10ff (invalid) ---
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 ff
CALLBACK, event 0, msg length 0, bvci 0x10ff
gbproxy: Reject SGSN UNITDATA messages with an invalid BVCI Currently such messages lead to a creation of a new peer with the SGSN's NSEI, which results in echoing the message back to the SGSN. This patch modifies this by sending a STATUS response (invalid BVCI) instead back to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:17 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 10
41 07 81 05 04 82 10 ff 15 80
gbproxy: Test invalid BVCI from SGSN This adds a test with a UNITDATA SGSN message that is addressed to an invalid (unknown) BVCI. The test shows, that the message is echoed to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:16 +00:00
gbproxy: Reject SGSN UNITDATA messages with an invalid BVCI Currently such messages lead to a creation of a new peer with the SGSN's NSEI, which results in echoing the message back to the SGSN. This patch modifies this by sending a STATUS response (invalid BVCI) instead back to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:17 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 14
00 00 00 00 41 07 81 05 04 82 10 ff 15 80
gbproxy: Test invalid BVCI from SGSN This adds a test with a UNITDATA SGSN message that is addressed to an invalid (unknown) BVCI. The test shows, that the message is echoed to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:16 +00:00
gbproxy: Reject SGSN UNITDATA messages with an invalid BVCI Currently such messages lead to a creation of a new peer with the SGSN's NSEI, which results in echoing the message back to the SGSN. This patch modifies this by sending a STATUS response (invalid BVCI) instead back to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:17 +00:00
result (UNITDATA) = 14
gbproxy: Test invalid BVCI from SGSN This adds a test with a UNITDATA SGSN message that is addressed to an invalid (unknown) BVCI. The test shows, that the message is echoed to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:16 +00:00
Gbproxy global:
gbproxy: Reject SGSN UNITDATA messages with an invalid BVCI Currently such messages lead to a creation of a new peer with the SGSN's NSEI, which results in echoing the message back to the SGSN. This patch modifies this by sending a STATUS response (invalid BVCI) instead back to the SGSN. Sponsored-by: On-Waves ehf
2013-10-18 20:12:17 +00:00
Invalid BVC Identifier : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Initialise SGSN ---
MESSAGE to SGSN at 0x05060708:32000, msg length 12
02 00 81 01 01 82 01 01 04 82 01 00
PROCESSING RESET_ACK from 0x05060708:32000
03 01 82 01 01 04 82 01 00
MESSAGE to SGSN at 0x05060708:32000, msg length 1
0a
result (RESET_ACK) = 1
PROCESSING ALIVE_ACK from 0x05060708:32000
0b
MESSAGE to SGSN at 0x05060708:32000, msg length 1
06
result (ALIVE_ACK) = 1
PROCESSING UNBLOCK_ACK from 0x05060708:32000
07
==> got signal NS_UNBLOCK, NS-VC 0x0101/5.6.7.8:32000
result (UNBLOCK_ACK) = 0
PROCESSING ALIVE from 0x05060708:32000
0a
MESSAGE to SGSN at 0x05060708:32000, msg length 1
0b
result (ALIVE) = 1
Current NS-VCIs:
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
--- Initialise BSS 1 ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x1001(4097), NSEI 0x1000(4096)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 10 01 04 82 10 00
==> got signal NS_RESET, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 9
03 01 82 10 01 04 82 10 00
MESSAGE to BSS at 0x01020304:1111, msg length 1
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
MESSAGE to BSS at 0x01020304:1111, msg length 1
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 1
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x1001, NSEI 0x1000, peer 0x01020304:1111
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
--- Setup BVCI 1 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Setup BVCI 2 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x2002(8194)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 20 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 20 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 20 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 20 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 20 02
result (BVC_RESET_ACK) = 9
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 1 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to SGSN, BVCI 0x1002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to BSS, BVCI 0x1002, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 02
result (UNITDATA) = 4
--- Send message from BSS 1 to SGSN and back, BVCI 2 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to SGSN, BVCI 0x2002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 20 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 20 02
result (UNITDATA) = 4
--- Change NSEI ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x1001(4097), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 10 01 04 82 20 00
==> got signal NS_RESET, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 9
03 01 82 10 01 04 82 20 00
MESSAGE to BSS at 0x01020304:1111, msg length 1
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
MESSAGE to BSS at 0x01020304:1111, msg length 1
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x1001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 1
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x1001, NSEI 0x2000, peer 0x01020304:1111
NS-VC changed NSEI count : 1
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
--- Setup BVCI 1 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
--- Setup BVCI 3 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x3002(12290)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 30 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 30 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 30 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 30 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 30 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 30 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 30 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 30 02
result (BVC_RESET_ACK) = 9
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
--- Send message from BSS 1 to SGSN and back, BVCI 1 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to SGSN, BVCI 0x1002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to BSS, BVCI 0x1002, msg length 0
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 02
result (UNITDATA) = 4
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 2 (should fail) ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to SGSN, BVCI 0x2002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 20 02
result (UNITDATA) = 4
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
PROCESSING UNITDATA from 0x05060708:32000
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
result (UNITDATA) = -22
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
NS Transmission error : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 3 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 30 02
CALLBACK, event 0, msg length 0, bvci 0x3002
NS UNITDATA MESSAGE to SGSN, BVCI 0x3002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 30 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 30 02
CALLBACK, event 0, msg length 0, bvci 0x3002
NS UNITDATA MESSAGE to BSS, BVCI 0x3002, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 30 02
result (UNITDATA) = 4
--- Change NSVCI ---
Setup NS-VC: remote 0x01020304:1111, NSVCI 0x2001(8193), NSEI 0x2000(8192)
PROCESSING RESET from 0x01020304:1111
02 00 81 01 01 82 20 01 04 82 20 00
==> got signal NS_REPLACED: 0x2001/0.0.0.0:0 -> 0x1001/1.2.3.4:1111
==> got signal NS_RESET, NS-VC 0x2001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 9
03 01 82 20 01 04 82 20 00
MESSAGE to BSS at 0x01020304:1111, msg length 1
0a
result (RESET) = 9
PROCESSING ALIVE from 0x01020304:1111
0a
MESSAGE to BSS at 0x01020304:1111, msg length 1
0b
result (ALIVE) = 1
PROCESSING UNBLOCK from 0x01020304:1111
06
==> got signal NS_UNBLOCK, NS-VC 0x2001/1.2.3.4:1111
MESSAGE to BSS at 0x01020304:1111, msg length 1
07
result (UNBLOCK) = 1
PROCESSING ALIVE_ACK from 0x01020304:1111
0b
result (ALIVE_ACK) = 0
Current NS-VCIs:
VCI 0x2001, NSEI 0x2000, peer 0x01020304:1111
NS-VC replaced other count: 1
VCI 0x1001, NSEI 0x2000, peer 0x00000000:0
NS-VC changed NSEI count : 1
VCI 0x0101, NSEI 0x0100, peer 0x05060708:32000
NS-VC Block count : 1
--- Setup BVCI 1 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x1002(4098)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 10 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 10 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 10 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 10 02
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 10 02
result (BVC_RESET_ACK) = 9
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
NS Transmission error : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Setup BVCI 4 ---
Setup BSSGP: remote 0x01020304:1111, BVCI 0x4002(16386)
PROCESSING BVC_RESET from 0x01020304:1111
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 40 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
CALLBACK, event 0, msg length 22, bvci 0x0000
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 40 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NS UNITDATA MESSAGE to SGSN, BVCI 0x0000, msg length 22
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
22 04 82 40 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
MESSAGE to SGSN at 0x05060708:32000, msg length 26
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
00 00 00 00 22 04 82 40 02 07 81 08 08 88 11 22 33 40 50 60 10 00 00 00 00 00
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
result (BVC_RESET) = 26
PROCESSING BVC_RESET_ACK from 0x05060708:32000
00 00 00 00 23 04 82 40 02
CALLBACK, event 0, msg length 5, bvci 0x0000
23 04 82 40 02
NS UNITDATA MESSAGE to BSS, BVCI 0x0000, msg length 5
23 04 82 40 02
MESSAGE to BSS at 0x01020304:1111, msg length 9
00 00 00 00 23 04 82 40 02
result (BVC_RESET_ACK) = 9
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 1
NS Transmission error : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 1 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to SGSN, BVCI 0x1002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 10 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 10 02
CALLBACK, event 0, msg length 0, bvci 0x1002
NS UNITDATA MESSAGE to BSS, BVCI 0x1002, msg length 0
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 10 02
result (UNITDATA) = 4
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 2 (should fail) ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to SGSN, BVCI 0x2002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 20 02
result (UNITDATA) = 4
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 2
NS Transmission error : 1
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
PROCESSING UNITDATA from 0x05060708:32000
00 00 20 02
CALLBACK, event 0, msg length 0, bvci 0x2002
NS UNITDATA MESSAGE to BSS, BVCI 0x2002, msg length 0
result (UNITDATA) = -22
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 2
NS Transmission error : 2
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
--- Send message from BSS 1 to SGSN and back, BVCI 3 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 30 02
CALLBACK, event 0, msg length 0, bvci 0x3002
NS UNITDATA MESSAGE to SGSN, BVCI 0x3002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 30 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 30 02
CALLBACK, event 0, msg length 0, bvci 0x3002
NS UNITDATA MESSAGE to BSS, BVCI 0x3002, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 30 02
result (UNITDATA) = 4
--- Send message from BSS 1 to SGSN and back, BVCI 4 ---
PROCESSING UNITDATA from 0x01020304:1111
00 00 40 02
CALLBACK, event 0, msg length 0, bvci 0x4002
NS UNITDATA MESSAGE to SGSN, BVCI 0x4002, msg length 0
MESSAGE to SGSN at 0x05060708:32000, msg length 4
00 00 40 02
result (UNITDATA) = 4
PROCESSING UNITDATA from 0x05060708:32000
00 00 40 02
CALLBACK, event 0, msg length 0, bvci 0x4002
NS UNITDATA MESSAGE to BSS, BVCI 0x4002, msg length 0
MESSAGE to BSS at 0x01020304:1111, msg length 4
00 00 40 02
result (UNITDATA) = 4
Gbproxy global:
Peers:
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 16386, not blocked, RAC 112-332-16464-96
NSEI 8192, BVCI 12290, not blocked, RAC 112-332-16464-96
NSEI 4096, BVCI 8194, not blocked, RAC 112-332-16464-96
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
NSEI mismatch : 2
NS Transmission error : 2
gprs/test: Use valid MCC/MNC for BVC RESET The code currently uses an encoded sequence of (hex) 10 20 30 40 50 60 as RAI, for which no bijective mapping to the set of representations MCC-MNC-LAC-RAC exists. This patch changes the hard-coded RAI to 11 22 33 40 50 60 which maps to 112-332-16464-96 (and vice-versa). Sponsored-by: On-Waves ehf
2014-06-02 08:48:59 +00:00
NSEI 8192, BVCI 4098, not blocked, RAC 112-332-16464-96
gbproxy: Fix handling of NSEI changes The gbproxy looses NSEI changes on BVC_RESET and then tries to send later messages to the wrong (not longer existing) destination. This patch fixes this by updating the peer's nsei field on BVC_RESET. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:56 +00:00
NSEI mismatch : 1
gbproxy: Add test for NSEI and NSVCI changes This checks the behavior of the gbproxy when the BSS peer changes the NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA messages after these changes between BSS and SGSN and vice versa (via the gbproxy). Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-24 10:48:55 +00:00
===== GbProxy test END
gbproxy: Add test program to test gbproxy message handling This program tests the gbproxy implementation by passing NS messages to a modified gbproxy that dumps the resulting messages, signals, and state. It focusses on testing abnormal situations like port changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15 10:00:26 +00:00