..
Makefile.am
lc15: port lc15bts-mgr changes
2017-07-19 11:47:47 +02:00
abis.c
OML: internalize failure reporting
2017-01-25 13:24:52 +01:00
amr.c
Fix some spelling errors
2016-12-22 14:04:22 +00:00
bts.c
bts: revert trx shutdown order
2017-05-08 07:46:25 +00:00
bts_ctrl_commands.c
Add ctrl command to send OML alert
2017-01-25 13:29:03 +01:00
bts_ctrl_lookup.c
CTRL: make the CTRL-Interface IP address configurable
2017-01-10 15:45:59 +00:00
cbch.c
fix compiler warning: printf format for sizeof()
2016-06-17 15:34:42 +00:00
dtx_dl_amr_fsm.c
Fix AMR HR DTX FSM logic.
2017-02-01 19:13:16 +00:00
gsm_data_shared.c
re-work original osmo-bts with support for sysmocom femtobts
2011-06-27 11:25:35 +02:00
handover.c
Check for suitable lchan type when detecting HO
2017-03-14 14:17:44 +00:00
l1sap.c
L1SAP: Print chan_nr and link_id always as hex
2017-07-30 17:38:37 +02:00
lchan.c
cosmetic: common ts_is_pdch()
2016-08-30 07:35:47 +00:00
load_indication.c
paging: send CCCH load indications even if paging load below threshold
2012-11-24 22:28:44 +01:00
logging.c
add missing DSUM entry to bts_log_info_cat
2016-06-17 15:32:03 +00:00
main.c
OML: internalize failure reporting
2017-01-25 13:24:52 +01:00
measurement.c
measurement: fix measurment report
2017-07-10 15:30:59 +00:00
msg_utils.c
Fix AMR HR DTX FSM logic.
2017-02-01 19:13:16 +00:00
oml.c
OML: move BTS number check into separate function
2017-06-22 10:51:12 +00:00
paging.c
Fix AGCH/PCH proportional allocation
2016-12-01 15:25:26 +00:00
pcu_sock.c
Allow passing low link quality buffers to upper layers
2017-07-10 08:44:00 +00:00
phy_link.c
phy_link: Fix typo in state being printed
2017-05-24 19:26:48 +02:00
power_control.c
move MS power control handling from sysmobts to common part
2015-09-22 16:39:05 +02:00
rsl.c
si2q: do not consider count update as error
2017-07-11 16:22:29 +00:00
scheduler.c
scheduler: Fix wrong log subsystem: L1C is L1 *control* not user data
2017-07-19 16:02:25 +02:00
sysinfo.c
Ensure we don't send dummy UI frames on BCCH for TC=5
2017-07-15 22:36:10 +02:00
tx_power.c
sysmobts: Don't start with 0dBm TRX output power before ramping
2017-04-06 18:41:01 +02:00
vty.c
vty: Remove command for manual channel activation/deactivation
2017-05-29 21:58:51 +02:00