Osmocom Base Transceiver Station (BTS)
https://osmocom.org/projects/osmobts
![]() It's useful to know RTP statistics (number of packets lost, jitter, etc) when looking at voice call quality issues. Right now this information is not avialable anywhere and this looks like the best place to start. Change-Id: Ife9f27c43157b4a1bf71aba41cd7b0f5f41ac99f |
||
---|---|---|
contrib | ||
debian | ||
doc | ||
include | ||
src | ||
tests | ||
.gitignore | ||
.gitreview | ||
.mailmap | ||
COPYING | ||
Makefile.am | ||
README | ||
configure.ac | ||
git-version-gen |
README
= Repository for the Osmocom BTS implementation. = For most complete and accurate information, please refer to https://osmocom.org/projects/osmobts/wiki To submit patches, please refer to https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit (Note: github pull requests are rejected by a bot) == Summary == This code implements Layer 2 and higher of a more or less conventional GSM BTS (Base Transceiver Station) - however, using an Abis/IP interface, rather than the old-fashioned E1/T1. Specifically, this includes * BTS-side implementation of TS 08.58 (RSL) and TS 12.21 (OML) * BTS-side implementation of LAPDm (using libosmocore/libosmogsm) * A somewhat separated interface between those higher layer parts and the Layer1 interface. Several kinds of BTS hardware are supported: * sysmocom sysmoBTS * Octasic octphy * Nutaq litecell 1.5 * software-defined radio based osmo-bts-trx (e.g. B210) == Known Limitations == As of August 20, 2015, the following known limitations exist in this implementation: === Common Core === * No Extended BCCH support * System Information limited to 1,2,2bis,2ter,2quater,3,4,5,6,9,13 * No RATSCCH in AMR * No OML (TS 12.21) alarms yet (temperature, ...) * Only single-TRX BTS at this point * Will reject TS 12.21 STARTING TIME in SET BTS ATTR / SET CHAN ATTR * No support for frequency hopping * No reporting of interference levels as part of TS 08.58 RF RES IND * No error reporting in case PAGING COMMAND fails due to queue overflow * No use of TS 08.58 BS Power and MS Power parameters * No support of TS 08.58 MultiRate Control * No support of TS 08.58 Supported Codec Types * No support of Bter frame / ENHANCED MEASUREMENT REPORT === osmo-bts-sysmo === * No CSD / ECSD support (not planned) * GSM-R frequency band supported, but no NCH/ASCI/SoLSA * All timeslots on one TRX have to use same training sequence (TSC) * No multi-TRX support yet, though hardware+L1 support stacking * Makes no use of 12.21 Intave Parameters and Interference Level Boundaries * Doesn't yet include MAC address in Abis/IP Identity message * MphConfig.CNF can be returned to the wrong callback. E.g. with Tx Power and ciphering. The dispatch should take a look at the hLayer3.