Make it obvious for compilers and for coverity, that the sapi value used
to shift a bit for the sapi_mask is always <= 31. The sapi value is an
index of the value string l1sap_common_sapi_names, which has 24 entries.
Fixes: CID#205067, CID#205068
Change-Id: Id8be0ab67479b1f76a4f624bd3a5242e4fe59f4b
Change uint8_t sapi to int, so we can properly assert on errors from
get_string_value().
Fixes: CID#205066, CID#205069
Change-Id: I4d30afacfab93051868ae8f462cee9ad3dbc7fd0
Before this patch, if due to whatever reason the TRX started fine (RSP
POWERON 0) and sockets were created but no CLOCK IND was ever received
by the BTS, it wouldn't notice since the timerfd timeouts
(bts_shutdown("no clock")) are only checked after the first CLOCK IND is
sent by the TRX.
As a result, the BTS would be kept on forever saying everything is fine
but it would be sending no DL burst at all to the TRX (tested with a
modfied osmo-trx dropping clock indication).
With this patch, new APIs are added to indicate the scheduler_trx code
the timeframes where clock ind are expected (between RSP POWERON 0 and
RSP POWEROFF 0); if TRX sends clock indications out of that timeframe,
BTs lower layers will drop them (controlled by "powered" bool).
Hence, the scheduler_trx can now place a timeout (reusing same timerfd
because its new use is exclusive in time with its other previous use)
when it is told that CLOCK IND should start appearing, and if none
arrives in considerable time, then the BTS can be shut down to notify
the rest of the network.
Related: OS#4215
Change-Id: Iba5dbe867aff10e70ec73dbf1f7aeeecb15c0a4d
Add a new common L1 SAPI enum, to unify all the BTS specific SAPIs.
Translate to this enum, and set the context for uplink messages in
each BTS specific implementation.
Set the context for downlink messages in the common l1sap code, by
converting the osmo_phsap_prim back to the SAPI value (mostly looking at
chan_nr). The new functions for doing this conversion,
get_common_sapi_by_trx_prim() and get_common_sapi_ph_data(), are based
on the existing to_gsmtap() and gsmtap_ph_data() functions.
Note that we can't set the uplink SAPI context in the common code,
because then we can't set it as early as possible. In this patch, the
SAPI context is set for the PHYs where the SAPI is readily available.
With additional conversion from the RSL channel, the SAPI context could
be set for osmo-bts-trx in a follow up patch.
Related: OS#2356
Depends: (libosmocore) I814cb3328d99faca9220adb5a80ffb934f219d7d
Change-Id: I6b7bb2e1d61502b61214f854a4ec5cbb7267545b
The ticket has been closed, BER and C/I measurements are now being
sent to OsmoPCU (see Ia58043bd2381a4d34d604522e02899ae64ee0d26).
Change-Id: I1909a70b82421802f32c1bc4f69a2e4210db5b2d
We don't know whether a data block on PDCH belongs to PDTCH or PACCH
without parsing it, because the latter one is being allocated on
demand. Let's use GSMTAP_CHANNEL_PDTCH by default, rather than
GSMTAP_CHANNEL_PACCH.
Change-Id: I7639215ef936a8ac05ca417a91f4e12755f318d4
First of all, we also need to apply the same filtering to Access
Bursts on PDCH as for the normal ones on RACH, i.e. filter them
by ToA (Timing of Arrival) and BER (Bit Error Rate).
Secondly, we shall not interpret Access Bursts on PDTCH/U as
handover related ones. Instead, let's print a warning and
ignore them since they are not (yet) supported by OsmoBTS.
Finally, in gsmtap_pdch() we need to set a proper channel type
for Access Bursts received on PDCH (PDTCH/U or PTCCH/U).
Change-Id: I461fde9f4543c45c42b591cd3fd0ff3d98673cec
RACH stands for Random Access CHannel, while in rach_pass_filter()
we're dealing with Access Bursts, that may be received on other
logical channels too (e.g. PTCCH, PDTCH or any other).
Change-Id: I1e5ca9930ab491a6916c972865154d54530cbf51
Currently we don't distinguish between CBCH on BCCH+SDCCH/4 and
CBCH on SDCCH/8, but in libosmogsm we have two independent
(non-standard) RSL channel number values for them. Maybe some day
we will, so let's extend the definition of L1SAP_IS_CHAN_CBCH.
Change-Id: I2f6d501a29edaf89dfb17d5d64f930cdb1943630
After getting rid of transceiver_available, this function is not used
anymore by any code, since its per-trx counterpart
l1if_provision_transceiver_trx() is the one used by other
code.
Change-Id: If5a988eb14658a78dd46234dccc052dc12fb872a
This variable meaning has been changing its exact meaning over time
until finally not being really clear which kind of state it holds.
Initially it seemed to be used to identfy whether CLOCK IND were being
received. However, over time both osmo-bts and osmo-trx have evolved and
were fixed so that clock indications are only sent by osmo-trx after
POWERON command is sent. As a result, this state can be checked simply by
looking at the "powered" phy_link variable, which is only set to true
once the TRX has confirmed the POWERON command, and hence it is sending
CLOCK IND.
On the other hand, at some point in time "available" started to be set to 1
in bts_model_phy_link_open(), which means available is nowadays almost
always 1 from startup until the end (only dropped during bts_shutdown(),
when we are already exiting the process anyway).
As a result, !available condition in scheduler_trx.c:trx_fn_timer_cb can
almost never happen, because available is set to true already. Only
possibility would be if an old process of osmo-trx (not set up by this
BTS process) is still sending CLOCK INDs, but in that case we for sure
don't want to configure the BTS based on that, but ignore them until
this BTS process has again configured the TRX. So that whole check can
be dropped. We are better checking for "powered" state, which is far
more accurate, and we better do that in trx_if.c before calling
trx_fn_timer_cb().
Other uses of "transceiver_available" being used can be changed to use
plink->state!= PHY_LINK_SHUTDOWN, since available was already being set
to 1 at the same time the plink->state was being set to
PHY_LINK_CONNECTING.
As a result of this state handling re-arrangement, OS#4215 is fixed
since trx_if_powered() is used instead of previous state condition to
check whether data frames should be sent.
Related: OS#4215
Change-Id: I35f4697bd33dbe8a4c76c9500b82c16589c701d4
It can be dropped since bts_shutdown() ends up calling immediatelly
bts_model_trx_close() which in turn calls bts_model_trx_close() which
sets enabled = false and calls l1if_provision_transceiver_trx() to
power off the TRX.
Related: OS#4215
Change-Id: If8b3d2379d7ae102e1c338f4558ac1352de761cc
Use of variables in each code is confusing and mixing configuration with
POWERON/POWEROFF state (which is at least per phy inst and not per TRX,
since those commands are only expected on the 1st phy inst).
* field "poweron" becomes "enabled", and is used as an indicator for
actions to take during TRX provisioning (hether to power it on and
configure it or to power it off).
* poweron/poweroff state becomes "powered", and it is shared by all trx
in same phy_link, and is updated only after confirmation by TRX.
* poweron_set becomes poweronoff_set (because it's used by both POWERON
and POWEROFF), and becomes shared by all trx in same phy_link, since
those CMDs are usually sent by first phy instance of the link (the first
trx).
Related: OS#4215
Change-Id: Icd0b482f1454236432e1952220bbec9d178b8607
check_transceiver_availability() is a loop over every trx, same to what
trx_set_bts() does, so let's call the per-trx version directly.
Change-Id: I8843c1438c6af700631aba7b7e72aae0bdb7ec3a
Currently there's bts-virtual specific fields in gsm_bts which is not used
by other models and are always allocated.
An alternative would be having a union with different structs inside,
one per model, but since we already have the bts_model abstraction, in this
case it makes more sense to use that abstraction instead of filling code
with preprocessor ifdefs to guard against non-defined types, etc.
Existing model specific data is moved there.
This new infra will be user further in forthcoming commits.
Related: OS#4215
Change-Id: Ib17a752cdbaa7d5eb8c5dfa0b197f80a4f38b38e
QTA is a Timing Advance value in units of 1/4 of a symbol. Let's
use ToA256 (1/256 of a symbol) field of L1SAP RACH.ind as a base
for QTA calculation in order to achieve better precision.
Change-Id: I6e6fa7985c430a9bdbd12af2a8b2a5a66f11a41c
If a logical channel, on which an Access Burst has been received,
is not either of RACH, PDTCH or PTCCH, then this is a handover
Access Burst, which is always encoded as 8-bit and shall contain
the generic training sequence (TS0).
Access Bursts on a PDCH time-slot are not related to handover.
Change-Id: If7d6135d6c4d7f9bd71d9fab6f8adc3f8cfd10ea
According to 3GPP TS 45.010, section 5.6.2, for packet-switched
channels the BTS shall monitor the delay of the Access Bursts
sent by the MS on PTCCH and respond with timing advance values
for all MS performing the procedure on that PDCH.
According to 3GPP TS 45.002, section 3.3.4.2, PTCCH (Packet Timing
advance control channel) is a packet dedicated channel, that is
used for continuous Timing Advance control (mentioned above).
There are two sub-types of that logical channel:
- PTCCH/U (Uplink): used to transmit random Access Bursts
to allow estimation of the Timing Advance for one MS in
packet transfer mode.
- PTCCH/D (Downlink): used by the network to transmit
Timing Advance updates for several MS.
As per 3GPP TS 45.003, section 5.2, the coding scheme used for
PTCCH/U is the same as for PRACH as specified in subclause 5.3,
while the coding scheme used for PTCCH/D is the same as for
CS-1 as specified in subclause 5.1.1.
The way we used to handle both PTCCH/U and PTCCH/D is absolutely
wrong - they have nothing to do with xCCH coding. Instead, we
need to use tx_pdtch_fn() for Downlink and rx_rach_fn() for Uplink.
In l1sap_ph_rach_ind() we need to check if an Access Burst was
received on PTCCH/U and forward it to OsmoPCU with proper SAPI
value (PCU_IF_SAPI_PTCCH). To be able to specify a SAPI, a new
parameter is introduced to pcu_tx_rach_ind().
Change-Id: I232e5f514fbad2c51daaa59ff516004aba97c8a3
Related: OS#4102
Otherwise using "logging level set-all info" makes it impossible to see
anything in VTY due to tons of those two lines appearing.
Change-Id: I9c7500c1e56db0c4dcb474f93c882a9c7c004d55
If VTY cmd "osmotrx trxd-max-version 0" is used, max version 0 is used
(default starting one) and hence no need to send SETFORMAT (this is
useful in order to avoid sending SETFORMAT to old TRX implementations
not supporting the command). In this case, let's inform the user that
indeed osmo-bts won't send SETFORMAT because version 0 is assumed.
Change-Id: I7136ea6745c2275278bc400676b58fb4b10da966
libosmocodec has recently introduced a generic ECU abstraction layer
which supports (pluggable) Error Concealment Units for not only the
FR codec, but potentially any other codec, too.
Change-Id: I001005aae6de76d4e045b8dc572239f057bb150d
Depends: libosmocore I4d33c9c7c2d4c7462ff38a49c178b65accae1915
We call _sched_compose_tch_ind() after the switch statement, so
there is no need to send it from case 'GSM48_CMODE_SPEECH_AMR'.
Change-Id: I0488082494120157ac438d7763b52e3998f0eac7
When sending an AMR BFI, we need to call osmo_amr_rtp_enc() with
AMR_BAD as the last parameter. This function returns the length
of encoded payload, which needs to be at least 2 octets long.
If osmo_amr_rtp_enc() returns a length value lower than 2 octets
(what should not happen in general), we should neither call
memset() on it, nor call _sched_compose_tch_ind().
Change-Id: I70ce98c5697b9ce6fac7ab57a5d70f3201db29d9
Fixes: CID#178648, CID#178637, CID#178651
All MS/UE must be notified of ETWS Primary Notifiations.
Depending on their state, the notification goes different paths:
* CS dedicated mode: BSC sends it as L3 message over LAPDm / DCCH
* CS/PS idle mode: BTS sends paging messages on PCH
* PS TBF active: PCU send Packet Application Info
This enables the last of the three methods by passing any
ETWS Primary Notifications received over RSL via the PCU socket into
the PCU.
Change-Id: Ic0b3f38b400a0ca7e4089061ceb6548b0695faa6
Related: OS#4047, OS#4048
The ETWS (Earthquake and Tsunami Warning System) uses a so-called
ETWS Primary Notification which is sent
* to phones in dedicated mode (via DCCH from the BSC)
* to phones in idle mode (via P1 Rest Octets on PCH/CCCH)
This patch implements the second part of the functionality, i.e.
transmitting the related ETWS Primary Notification via PCH. As
3GPP doesn't specify how this is communicated over Abis, we use
a new, vendor-specific RSL message type.
Closes: OS#4047
Depends: libosmocore I89c24a81ada6627694a9632e87485a61cbd3e680
Depends: libosmocore I36fc2ffc22728887d1cb8768c7fcd9739a8ec0fc
Change-Id: I18c60cdb86b9c19e09f5ec06d66e9b91608880e6
Convert the cell identity to LE when sending it to the PCU via unix
socket, just like we do it with the location area code.
In the Osmocom stack, the CellID is configured in OsmoBSC, sent as BE
via RSL to OsmoBTS, then with a socket to OsmoPCU (where OsmoPCU expects
it to be LE in a LE system). OsmoBTS was always sending the CellID as
BE to OsmoPCU. In March 2018, a regression in OsmoPCU [1] caused an
endianness swap in the CellID on LE systems, resulting by chance in the
correct, LE encoded, CellID as it should have been sent from OsmoBSC
(for LE systems). This regression was fixed in March 2019 [2].
I've verified this fix with a TTCN3 test [3].
[1] I787fed84a7b613158a5618dd5cffafe4e4927234 (osmo-pcu)
[2] I2f6cc930c5dbf8dac386b24b0756df2efe8199e4 (osmo-pcu)
[3] I6516808f4b9e9a2301f9ccc1e55ded14e7334c33 (osmo-ttcn3-hacks)
Related: OS#3854
Change-Id: I68faf4558f0686fb2a3db24077dceaae05bf0262
Oliver Smith
Martin Hauke
Pau Espin
Vadim Yanitskiy
Harald Welte