This daemon is taking care of counting the number of hours in operation
and to watch the system temperature as determined by internal
temperature sensors.
Later, it will export an external interface for firmware reload, as well
as a way to raise OML ALARMs in case of temperature issues or other
problems.
It has been tested with the OCXO and the network listen mode of the
firmware. For other sources we are not required to synchronize to
the network and the tool needs to be adjusted.
Check that adding a paging command works, check that it is expired
after the first call to paging_gen_msg. The test will be extended
to test the scheduling and selection of the various paging messages.
This code re-works osmo-bts to add support for the upcoming sysmocom BTS.
It also tries to add some level of abstraction between the generic
part of a BTS (A-bis, RSL, OML, data structures, paging scheduling,
BCCH/AGCH scheduling, etc.) and the actual hardware-specific bits.
The hardware-specific bits are currently only implemented for the sysmocom
femtobts, but should be (re-)added for osmocom-bb, as well as a virtual
BTS for simulation purpose later.
The sysmocom bts specific parts require hardware-specific header files
which are (at least currently) not publicly distributed.
Holger Hans Peter Freyther
Harald Welte