Unfortunately a glob like osmo-x__*.{svg,png} doesn't work, so have the
suffixes in separate globs.
Add dashes to indicate that failure should be ignored.
Change-Id: I6bc4d9ea72b43a573acbc860c23397f748de2c7b
There were two separate sections saying basically the same. Move the
entire 'Dynamic Channel Combinations' section further above and combine
with the 'IPA Style PDCH Management' section to avoid repetition.
Change-Id: Ic370ba34de5cb14f0194ff8c8661e45d7ca98e2b
Generate *.check files from asciidoc output and grep for WARNINGs.
Add *.check files to gitignore and to 'make clean'.
Change-Id: Ibccc83a3415930a528f2e8e4e4dda3b81c6d0b64
The section 'Osmocom Style Dynamic Channels' ended in mid-sentence without
naming any of the hard facts. Complete that.
Add section links.
Change-Id: Ib92895fe1bb89fb1b14dc8fcbd88b98bbb6edeee
Consistently name the PDCH act methid 'IPA style', name ip.access only once
in the 'IPA Style Dynamic Channels' section.
Consistently write 'IPA style' without hyphen (not 'IPA-style').
Capitalize section headers ('IPA Style').
Change-Id: I91112c2d8af9424ebe7e1972fd4ef9c77d24a7b4
In effect, this fixes the dangling references from the table of RSL messages
with additions/limitations to the Chan Act message description.
Change-Id: Ic6f83f016ce9ec90af7eb0af1b1f71a10263915d
Including the required changes of the Makefile which is now simliar
as the other projects Makefile's.
Based on: OsmoBTS 0.3.0.283-f869
Change-Id: Id7362ce1c584b1926330b93770d68453e091c71c
The act ack for switchover to PDCH is now issued immediately, after
commit 'dyn TS: if PCU is not connected, allow operation as TCH'.
Adjust the chart accordingly.
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
We used to permit multiple spaces to enter a new node in the config,
but modern osmo* code writes config files well-formed where every node
equals exactly one indent level.
Change-Id: I3da56b34e87503c46e6bf3c7505b83ec5e6aaa20
Change cfg file names so they don't overlap when installing different
osmo-bts versions, and make systemd services look for correct new name.
Remove unneeded duplicated EXTRA_DIST files from root dir Makefile.am
Change-Id: I75fdd06cc52ce50628efb1f9b007d2e3926db27d
Files from doc/examples/foo/bar.cfg are install to
/usr/share/doc/osmo-bts/examples/osmo-bts-foo/bar.cfg.
Change-Id: I7525d5a3e1a3c83a54f919cce9096303dd506f35
CalypsoBTS is a regular osmo-bts-trx with specific config options, so
let's move the cfg file to correct place. This also makes it easier to
install and package example files later on.
Change-Id: Ie2b968c478f1cf4d3e4cb36e4fb743e413cc93f0
Completely drop bts_log_init(), call osmo_init_logging2() directly instead: all
callers of bts_log_init() passed NULL as category string, so all it ever did
was call osmo_init_logging(). The bts_log_info is already declared in the .h.
Here and there also define a proper talloc root context instead of using NULL.
Change-Id: Ic049f77bef74123b95350bcae182a468e0086b9c
Despite the CalypsoBTS transceiver is similar to OsmoTRX, there
are some changes required to make it work with OsmoBTS. Let's
add a new configuration example for that.
Change-Id: Ia4b1797de576ab987b05046aa9a9828858023ed3
I was unable to start osmo-bts-lc15 with this config file until this
change was made, it said this command didn't exist.
Change-Id: Iae80e2ed504b5e26d748d57be7558ce470555f97
On 'write file':
- Write 'osmotrx' before 'maxdly' and 'maxdlynb' (broken since "Introduce new
phy_link and phy_instance abstraction"
d784e50747)
- Fix indenting of 'write file' output, command 'osmotrx timing-advance-loop',
had a stray space in case there is not a 'no' preceding it.
Add some missing instances of OSMOTRX_STR doc strings.
examples/osmo-bts.cfg:
- Drop 'settsc', the command no longer exists.
- Fix indenting of 'osmotrx rx-gain' command.
osmo-bts does not feature VTY tests, so it is pointless to add example files to
test these fixes. We should probably add VTY tests separately. However, I have
briefly tested manually (and hence found all of these issues).
Change-Id: I018eaef40345bfa26e12eb7d09e83a52596c1000
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
* copy sysmobts-mgr.cfg to sysmo/ directory
* add lc15bts-mgr.cfg
The configuration is BTS-specific so it should be located inside
appropriate subdirs.
Note: the old copy of sysmobts-mgr.cfg can be removed once the image
build recipes are adjusted.
Change-Id: Ic81197464809ba508b2572e86dd978a994f4b116
Related: SYS#3686
Also remove related cruft: .gitignore, msc-README and adjust an in-code
comment that referenced dyn_pdch.msc.
Change-Id: Ie41a453bb5070c1f18793f646dc053a978f43fba
Harald is right and that the code is generally not ready
for inclusion. I fell victim of trying to finish it while
the code is not ready at all. It is better to re-introduce
the patches in a smaller and more tested way.
The right way would have been a branch were ready things
are split-off the main/wip commit until everything is ready.
Revert "sysmobts: Have a common prefix for the enum"
This reverts commit 44980347f3.
Revert "utils: Used the enum manuf_type_id in the parameter of add_manufacturer_id_label"
This reverts commit 7d36e5ed46.
Revert "utils: Classify the OML message using the return type"
This reverts commit afee0b7929.
Revert "sysmobts: Do not access out of bound string"
This reverts commit f5f41e8051.
Revert "sysmobts: Separate IPA and OML check into two methods"
This reverts commit 13a224063d.
Revert "screenrc: osmobts-mgr now needs a config file"
This reverts commit 0a1699ff8a.
Revert "make sure osmobts-mgr.cfg file is included in tarballs"
This reverts commit 14c60b425f.
Revert "sysmobts-mgr: Add VTY support for configuring it"
This reverts commit c5fedd24c9.
Revert "sysmobts: Add beginnings of an OML router and create Failure Messages in the sysmobts-manager"
This reverts commit c6ab90b270.
This patch allows to configure the warning temperature threshold,
the severe temperature threshold of the board and the PA and the
actions like the relative value power that we want to reduce the
transmit power to and the part that we want to switch off or not.
Signed-off-by: Alvaro Neira Ayuso <anayuso@sysmocom.de>
Neels Hofmeyr
Neels Hofmeyr
Harald Welte
Pau Espin