'trx-calibration-path' is the new VTY command indicating the path
name where the calibration files can be found.
Calibration is only implemented for SUPERFEMTO API version 2.4.0 or
later.
In v2 the calibration value is the clock error in ppb that needs
to be compensated. Create a V2 specific implementation. Write the
clock value unconditionally as it is initialized to 0 by default
and not 0xffff.
The old firmware does not expose separate queues for PDCH and TCH. The change
appears to be too intrusive and I will try to find a more elegant solution.
Using osmo-bts-sysmo and this code, it is now possible to do FR and AMR
based voice calls on TCH/F.
A lot of CPU is wasted in the conversion between the RTP formats and the
L1 specific formats for the codec frames. All data needs to be shifted
by four bits, and the order of bits needs to be reversed in every byte.
when we activate the SCH in the DSP, we start a 5-second timer. If
we ever do not receive any MPH-TIME.ind primitives from L1 within
that time frame, we stop the process (and will be re-spawned)
This code re-works osmo-bts to add support for the upcoming sysmocom BTS.
It also tries to add some level of abstraction between the generic
part of a BTS (A-bis, RSL, OML, data structures, paging scheduling,
BCCH/AGCH scheduling, etc.) and the actual hardware-specific bits.
The hardware-specific bits are currently only implemented for the sysmocom
femtobts, but should be (re-)added for osmocom-bb, as well as a virtual
BTS for simulation purpose later.
The sysmocom bts specific parts require hardware-specific header files
which are (at least currently) not publicly distributed.
Harald Welte
Holger Hans Peter Freyther