* copy-paste gsm_data_shared.* from OpenBSC master
* remove corresponding configure check and option
* remove .deb dependency
Actual refactoring with removal of unnecessary structures/parts, moving
common OpenBSC/OsmoBSC parts into libraries etc. are left for further
patches.
Current patch will make coexistence with *BSC easier and will simplify
our build infrastructure.
Change-Id: I9f004fb5c4c1db29d4792dfd281d388c7063da13
Related: OS#1923
* do not deactivate lchan when called with LCHAN_REL_ACT_REACT
* add fixme comment
It's unclear yet if any special steps are required for osmo-bts-trx so
let's just make it compatible with setups [1] using BS_AG_BLKS_RES != 1
for now.
Background: CCCH is auto activated by some OsmoBTS - before we receive
SI3, see 4a85828462. To accommodate for
that we deactivate CCCH in common/rsl.c, which triggers BTS-model
specific callback sapi_deactivate_cb() which updates parameters and
activates it again.
In case of osmo-bts-trx there is no auto-activation and (seems to be) no
need in special interaction with hw to activate channel (no
lchan_activate()) hence we can just skip entire
deactivate/setup/activate again routine.
[1] "channel-descrption bs-ag-blks-res N" in OpenBSC config file.
Related: OS#1575
Change-Id: I20b89ba1e43d1414180b083cd1e085eeffe5d513
If SI13 becomes unavailable in runtime than send 0-length message with
BCCH SAPI to PCU to indicate that SI13 have to be removed.
Change-Id: I72aef8bd98f21c4b5ea6eed21fc56b30d85bfc1b
Related: OS#2400
* explicitly set SAPI when sending data_ind to PCU
* drop unused receiving code for BCCH SAPI
* send SI13 when PCU is connected
* send SI13 when new SI is received
Change-Id: I9e83ef792585aa962f99897d9973cef12f186bcf
Related: OS#2400
* move TA related globals into phy_link
* move power loop related globals into phy_link
* prefix corresponding vty vars with osmotrx
Change-Id: I01d7c1abad67e51b886a4ecf2de072929d67da27
Related: OS#1848
Whether or not we are talking to an OpenBTS (SETBSIC) or OsmoTRX
(SETTSC) transceiver is a property of the phy_link, and not a property
of the BTS. Also, we *really, really* should never use global
variables. I'm very happy this is being cleaned up, finally.
Change-Id: I51aeb17661dfd63ff347f7b2c0d7ffa383ec814c
So far, L1SAP code is hiding RSL_CHAN_OSMO_PDCH from the bts specific
code below L1SAP. This is some kind of a hack/workaround, making code
and debug output / logs more difficult to understand.
So let's teach the lower layer how to treat RSL_CHAN_OSMO_PDCH and
remove the "hiding" code from the common l1sap.c code.
Change-Id: Iaaa833febe45b82166d3901f10cc5466a7591c19
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
This patch adds a virtual physical layer designed to simulate the
Um air interface between BTS and MS. It does so by encapsulating MAC
blocks (Layer 2 PDUs) via GSMTAP and sending them through multicast UDP
streams, both in uplink and in downlink.
The purpose of this is enable testing without any radio hardware or
related licenses.
OsmocomBB has recently received as similar patch-set, adding a virty_phy
executable that can be run on a PC instead of the classic 'layer1'
firmware on a real phone.
Using GSMTAP means that one can use unmodified wireshark to decode the
messages exchanged on the virtual Um layer.
This code was originally started by Harald in January 2016, continued
by Sebastian Stumpf in late 2016 and early 2017, and finally completed
by Harald in July 2017.
Change-Id: I1bf7670975b1e367c1c62983020865a043542622
We want to always call l1if_tch_rx and l1sap_up in order to avoid losing triggering
events on the upper layer.
With this change, the upper layer will increase correctly seq + ts for
RTP. It will then send an RTP packet with only the header and no payload, which is
not correct but at least we avoid drifting the RTP clock. Upcoming patch
in the series solves this issue.
This patch assumes that we are not lossing data events from the physical
layer and that we receive an event every 20ms, even if the MS is not
transmitting due to DTX.
Depends on libosmocore If4ae20c22b881e94585dad710f17b9e37f77bf82
Change-Id: If5df8940fab833eb4e3ed851880b66987d356031
We used to have trx_meas_check_compute() and call that from the
bts-specific code in order to iterate over all timeslots and all lchans
in the timeslots if we have to send measurement reports. This was
executed once per frame, and created unequal CPU load over time, which
in turn might increase different per-ts jitter.
Since 2f028c4e2c in April 2017 we have
lchan_meas_check_compute(), which performs this on a per-lchan basis,
and hence CPU load is distributed over all active timeslots.
Change-Id: I6308cefe4a51e55719ea4ed4d613d3782b805c08
In some situations (e.g. when trying to do measurements/testing on the
BTS receiver / uplink) it is useful to have a way to disable the radio
link timeout and keep any channel open until deactivated, irrespective
of whether (valid) data is received or not.
This adds a related feature that can be activated by using an
osmocom-specific value of 0xff for the TS 12.21 Connection Failure
Criterion (9.4.14).
Change-Id: I736f21f6528db5c16fa80cdb905af20673797be5
* use GSM_BTS_HAS_SI() from OpenBSC instead of local copy
* arrange GSM_BTS_HAS_SI() checks to improve readability
* constify SI scheduler parameters
Change-Id: If74bc536fe7d2bfbc976c07d882151873ecda4f2
Related: OS#1660
This is resubmission of 9eeb0b1a13 with
errorneous use of talloc_asprintf() removed which should fix OS#2316.
Change-Id: I02ae6fffdc808c1ea14185dbb4a720d27a62d4bb
Related: OS#1614
Timing advance is currently not taken into account when computing
the measurement results, this commit fixes that
Change-Id: I2e0dfd13b53e8aa2822985f12bf2985e683ab553
This reverts commit 9eeb0b1a13.
This commit caused osmo-gsm-tester test runs for the sysmoBTS to fail with
SIGABRT consistently. See below redmine issues.
In osmo-bts-sysmo/l1_if.c, it uses talloc_asprintf to write to the char
version[MAX_VERSION_LENGTH]; talloc_asprintf() however is intended to work on
string buffers allocated by talloc, and attempts to reallocate version[].
Furthermore, it is not clear why the patch passes a 'data' arg to
app_info_sys_compl_cb() that is not used.
Hence I will revert this instead of trying to fix. Please resolve issues and
re-submit.
Related: OS#2316 OS#1614
Change-Id: I2c9fd5e6739c1750365c0241476ce4b1aa2df3d4
lchan_meas_check_compute() is a static function measurement.c.
In order to distribute the measurement result calculation events,
we need to be able to call lchan_meas_check_compute() from l1sap.c
Change-Id: Ideffe896613e0feda443bc13dac59dcdbbc605aa
add support for the TX/RX antenna-id feature that has been
introduced with release OCTSDR-2G-02.07.00-B1314-BETA. The
user can now set individual ID numbers for the TX and for
the RX antenna.
Change-Id: I872fe3c4d7b593358a4ce2f02cf0726611b9f3aa
In case a system has a high-gain external PA (like a 40dB PA) connected
externally, we cannot simply switch the transceiver to 0 dBm in
trx_init() only to then start the ramping at much lower levels once the
PHJ completes in trx_init_compl_cb(). The result would be a short
0 + 40 dBm spike followed by later ramping. We want to avoid that
spike, particularly its associated inrush current, so let's bring up the
board with smething very conservative like -50 dBm, and then ramp from
there.
Change-Id: I0ad91fce64f65e0213c9fcfde3390ace519055db
Fixes: SYS#3259
The macro L1SAP_IS_PTCCH(fn) only detects a PTCCH channel at fn%52 = 12,
the detection logic has been extended in order to detect PTCCH at fn%52 = 38.
See also 3GPP TS 05.02, Clause 7, Table 6 of 9
Change-Id: Ia6f3333121e5e920c5e1d562a081d0a1b58a1153
The ra parameter indicates the reason for the received rach
request. osmo-bts uses the ra parameter to determine if the
received rach request is packet access related. If yes,
osmo-bts will forward the request to the PCU.
In order to determine if the ra is packet related or not,
the higher 4 bits must be equel to 0x7 and at least one of
the lower 4 bits must be zero.
The current method lacks checking of the lower 4 bits. It
would also accept 0b01111111, which is reserved for future
use. This commit extends the check to take also the last
4 bits into accound.
See also: 3GPP TS 04.08, Table 9.9
Change-Id: I5eb88c42a91e158d9bfa4105ec9636035baf8959
Move rxgain and tx-attenuation (power) parameters from phy_link layer to phy_inst layer.
Rxgain and tx-attenuation parameters should be set for each phy_inst and send for each osmo-trx channel accordingly via control commands.
Change-Id: I4861a59d10d1ef91954e0c6ea265e66dec08844f
It seems more user friendly to look at a calibration table in terms of
the delta (positive or negative) compared to the nominal gain value,
rather than a collection of absolute gain values. It has the added
benefit that the (API/data model) user doesn't have to specify a gain
value for each ARFCN, but rather can rely on the default nominal gain in
absence of a calibration table for this specific unit.
Change-Id: I7311815902a88d2fc9d211cf4c62fa6fdc5e86ad
Improve state handling for for lock/unlock of OC_RADIO_CARRIER obj class. in
bts_model_chg_adm_state()
Change-Id: I034114beca95210169429d8ac1eb8648df12fc6c
Fix SID_FIRST_INH detection during speech and when SID_FIRST is interrupted by FACCH.
Fix SID_UPDATE_INH detection during silence and when SID_UPDATE is interrupted by FACCH.
Add a delay for SID_FIRST to appear at the right time after FACCH.
Fix extra byte sent in downlink for SID_FIRST and SID_UPDATE.
Change-Id: Ia811305e15541f2376005df736bd610e8b0d2f69
* make oml_tx_failure_event_rep() static and use osmo_signal_dispatch()
wrapped into oml_fail_rep() to trigger event reports outside of oml.c
instead of directly calling into OML layer
* remove unnecessary formatting from text messages
Related: OS#1615
Change-Id: I738555c547926e97b325ab53763c0076c42309bc
Currently the IP address where the control interface is bound
to is hardcoded to 127.0.0.1. This leads to problems with
multiple instances on one and the same machine. This commit
integrates the ctrl interface bind option into the VTY, so
that we can bind the ctrl interface to any IP address, just
like we do it with the VTY already.
Change-Id: If51e0c645c0789a4f4a8c51737fb81fb12f80829
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
* add vty option to manually enable adaptive RTP jitter
buffering (disabled by default) on per-bts level
* use this setting on per-lchan level when setting jitter parameters via
vty at runtime
* check and log result of osmo_rtp_socket_set_param()
* note: older libosmo-abis will ignore this setting which will be
properly detected via return value
* if jitter buffer is disabled by configuring "rtp jitter-buffer 0" than
adaptive buffering is disabled as well but it will be used if jitter
buffer is set to different value for a givel lchan via vty
Change-Id: I489f3c419039f40b57c2ef0641c176478b8d3566
Having RTP metadata is useful for debugging - save Sequence Number and
Timestamp next to Marker bit from RTP header.
Change-Id: I359b3bcb74fbfc071547fe2f9d837829374fe997
Do not assume that 1 == BS_AG_BLKS_RES but take that information from
SI3. Note: due to current implementation quirks we activate channels
before SI3 obtained, than we deactivate channels upon receiving SI3 and
activate them again. This might not be necessary once we migrate to
proper OML state machines.
This affects lc15 and sysmo hw.
Change-Id: I11377b12680ac3b2f77f80e742b6f0af63fc9c1e
Related: OS#1575
Remove lchan deactivation related code duplication to facilitate future
use for dynamic CCCH re-activation.
Change-Id: Id0d3b19dbfaa16d1734321a07a6eb0355bfd77c9
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
It was moved to OpenBSC in 582e4f627674f46310a90d9061e82fb342051b42 as
it's used by both projects.
Change-Id: I8aba987e3cdaa840cf3e14913a8455b0ba759889
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
SDCCH occupy lchan 0..3 in combined configuration so for CCCH we've
always used lchan[4] - replace it with CCCH_LCHAN define and add
comment.
Change-Id: Ic5d742c292d638f119c6b4672120c1950adeb7f0
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33b)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
Max
Harald Welte
Pau Espin
Philipp Maier
Neels Hofmeyr