The latest octphy firmware release (octsdr-2g-02.11.00-B1927-alpha),
introduces a 16X oversampling option which is not yet supported in
osmo-bts.
- Add oversampling flag in phy_link.h
- Add VTY commands to enable/disable oversampling
- Add phy messages to enable/disable oversampling
- Add conditional compilation to preserve support for legacy
header files and firmware
Change-Id: Ib78f92bfe03ff20aa0a257763c90844fb7b87cf0
Related: SYS#4257
Patch-by: Octasic inc.
* move TA related globals into phy_link
* move power loop related globals into phy_link
* prefix corresponding vty vars with osmotrx
Change-Id: I01d7c1abad67e51b886a4ecf2de072929d67da27
Related: OS#1848
Whether or not we are talking to an OpenBTS (SETBSIC) or OsmoTRX
(SETTSC) transceiver is a property of the phy_link, and not a property
of the BTS. Also, we *really, really* should never use global
variables. I'm very happy this is being cleaned up, finally.
Change-Id: I51aeb17661dfd63ff347f7b2c0d7ffa383ec814c
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
This patch adds a virtual physical layer designed to simulate the
Um air interface between BTS and MS. It does so by encapsulating MAC
blocks (Layer 2 PDUs) via GSMTAP and sending them through multicast UDP
streams, both in uplink and in downlink.
The purpose of this is enable testing without any radio hardware or
related licenses.
OsmocomBB has recently received as similar patch-set, adding a virty_phy
executable that can be run on a PC instead of the classic 'layer1'
firmware on a real phone.
Using GSMTAP means that one can use unmodified wireshark to decode the
messages exchanged on the virtual Um layer.
This code was originally started by Harald in January 2016, continued
by Sebastian Stumpf in late 2016 and early 2017, and finally completed
by Harald in July 2017.
Change-Id: I1bf7670975b1e367c1c62983020865a043542622
This is resubmission of 9eeb0b1a13 with
errorneous use of talloc_asprintf() removed which should fix OS#2316.
Change-Id: I02ae6fffdc808c1ea14185dbb4a720d27a62d4bb
Related: OS#1614
This reverts commit 9eeb0b1a13.
This commit caused osmo-gsm-tester test runs for the sysmoBTS to fail with
SIGABRT consistently. See below redmine issues.
In osmo-bts-sysmo/l1_if.c, it uses talloc_asprintf to write to the char
version[MAX_VERSION_LENGTH]; talloc_asprintf() however is intended to work on
string buffers allocated by talloc, and attempts to reallocate version[].
Furthermore, it is not clear why the patch passes a 'data' arg to
app_info_sys_compl_cb() that is not used.
Hence I will revert this instead of trying to fix. Please resolve issues and
re-submit.
Related: OS#2316 OS#1614
Change-Id: I2c9fd5e6739c1750365c0241476ce4b1aa2df3d4
add support for the TX/RX antenna-id feature that has been
introduced with release OCTSDR-2G-02.07.00-B1314-BETA. The
user can now set individual ID numbers for the TX and for
the RX antenna.
Change-Id: I872fe3c4d7b593358a4ce2f02cf0726611b9f3aa
Move rxgain and tx-attenuation (power) parameters from phy_link layer to phy_inst layer.
Rxgain and tx-attenuation parameters should be set for each phy_inst and send for each osmo-trx channel accordingly via control commands.
Change-Id: I4861a59d10d1ef91954e0c6ea265e66dec08844f
Improve state handling for for lock/unlock of OC_RADIO_CARRIER obj class. in
bts_model_chg_adm_state()
Change-Id: I034114beca95210169429d8ac1eb8648df12fc6c
The multi-trx had to be removed because of build conflicts
with octphy header that lack the struct members for needed
to support multi-trx.
For details see the following revert-commits:
ed6b48e4a5c9a1f284ac
This commit reintroduces multi trx support and ads an ifdef
decision to ensure that header files without multi-trx
support still work.
Change-Id: I7f9b2906cc149c817183745b4c96bcc7f9ebdad0
This reverts commit 06968beab9.
Theoretically, this patch makes a lot of sense, but in order to be able to
build osmo-bts-octphy until the headers version is clarified, revert use of
usCentreArfcn:
Above commit uses an usCentreArfcn member that is never defined in the history
of our octphy-2g-headers.git. This usCentreArfcn does exist in a code snapshot
OCTSDR-2G-02.05.00-B780-DEBUG, which is not (yet?) publicly available.
Also, the current headers version is apparently 02.07, though the octasic
version numbers have been known to cause confusion among osmocom folks.
This along with one other revert fixes this build problem:
make[3]: Entering directory '/n/s/octphy/git/osmo-bts/src/osmo-bts-octphy'
CC l1_oml.o
l1_oml.c: In function ‘l1if_trx_open’:
l1_oml.c:1350:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = plink->u.octphy.center_arfcn;
^
l1_oml.c:1352:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = trx->arfcn;
^
In file included from ../../include/osmo-bts/logging.h:5:0,
from l1_oml.c:33:
l1_oml.c:1365:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn, oc->Config.usTsc, oc->RfConfig.ulRxGainDb,
^
Change-Id: I222766f6961f5f35aa3651e2907e3e908fe9a66e
Previously software activation could have been reported multiple times
which broke proper BTS init. Introduce guard variable to ensure
reporting happens only once.
Note: this is just minimal workaround - ideally proper OML state machine
should be implemented.
Change-Id: Ifffbdb756bc5d2864f985c01a3299b839c4de7af
Related: OS#1648
There is implicit invariant in trx_phy_instance() which is actively used
by various hw-specific implementations to get TRX's phy instance. Let's
make sure there's explicit assertion for this because there's been
segfaults in the past related to it.
At the time the phy link / phy instance level VTY configuration
commands are parsed, we did not yet call l1if_open() and thus
pinst->u.{lc15,sysmobts}.hdl == NULL.
PHY or PHY instance specific configuration must thus be stored inside
the phy_link or phy_instance itself, and not inside the (not yet
existing) handle.
We solve this by moving around some parameters:
* clk_use_eeprom/clk_cal/clk_src/calib_path get replicated in
phy_instance
* min_qual_{rach,norm} are moved into the generic part (which means
that osmo-bts-octphy and osmo-bts-trx should also implement them)
Due to the changes introduced by the phy_link API, it's not easy to set
the default DSP trace flags via a command line argument anymore. We now
rather introduce a persitent VTY configuration command, by which the
default DSP tracing configuration can be set (for each PHY).
The persistent trace flags are stored in the phy_instance, while the
current operational run-time flags are in fl1h->phy_instance.
This includes changes required for
* shared main() function accross all BTS models
* use of the new phy_link / phy_instance infrastructure as the basis
for true multi-TRX operation