In some situations (e.g. when trying to do measurements/testing on the
BTS receiver / uplink) it is useful to have a way to disable the radio
link timeout and keep any channel open until deactivated, irrespective
of whether (valid) data is received or not.
This adds a related feature that can be activated by using an
osmocom-specific value of 0xff for the TS 12.21 Connection Failure
Criterion (9.4.14).
Change-Id: I736f21f6528db5c16fa80cdb905af20673797be5
* use GSM_BTS_HAS_SI() from OpenBSC instead of local copy
* arrange GSM_BTS_HAS_SI() checks to improve readability
* constify SI scheduler parameters
Change-Id: If74bc536fe7d2bfbc976c07d882151873ecda4f2
Related: OS#1660
This is resubmission of 9eeb0b1a13 with
errorneous use of talloc_asprintf() removed which should fix OS#2316.
Change-Id: I02ae6fffdc808c1ea14185dbb4a720d27a62d4bb
Related: OS#1614
Timing advance is currently not taken into account when computing
the measurement results, this commit fixes that
Change-Id: I2e0dfd13b53e8aa2822985f12bf2985e683ab553
This reverts commit 9eeb0b1a13.
This commit caused osmo-gsm-tester test runs for the sysmoBTS to fail with
SIGABRT consistently. See below redmine issues.
In osmo-bts-sysmo/l1_if.c, it uses talloc_asprintf to write to the char
version[MAX_VERSION_LENGTH]; talloc_asprintf() however is intended to work on
string buffers allocated by talloc, and attempts to reallocate version[].
Furthermore, it is not clear why the patch passes a 'data' arg to
app_info_sys_compl_cb() that is not used.
Hence I will revert this instead of trying to fix. Please resolve issues and
re-submit.
Related: OS#2316 OS#1614
Change-Id: I2c9fd5e6739c1750365c0241476ce4b1aa2df3d4
lchan_meas_check_compute() is a static function measurement.c.
In order to distribute the measurement result calculation events,
we need to be able to call lchan_meas_check_compute() from l1sap.c
Change-Id: Ideffe896613e0feda443bc13dac59dcdbbc605aa
add support for the TX/RX antenna-id feature that has been
introduced with release OCTSDR-2G-02.07.00-B1314-BETA. The
user can now set individual ID numbers for the TX and for
the RX antenna.
Change-Id: I872fe3c4d7b593358a4ce2f02cf0726611b9f3aa
In case a system has a high-gain external PA (like a 40dB PA) connected
externally, we cannot simply switch the transceiver to 0 dBm in
trx_init() only to then start the ramping at much lower levels once the
PHJ completes in trx_init_compl_cb(). The result would be a short
0 + 40 dBm spike followed by later ramping. We want to avoid that
spike, particularly its associated inrush current, so let's bring up the
board with smething very conservative like -50 dBm, and then ramp from
there.
Change-Id: I0ad91fce64f65e0213c9fcfde3390ace519055db
Fixes: SYS#3259
The macro L1SAP_IS_PTCCH(fn) only detects a PTCCH channel at fn%52 = 12,
the detection logic has been extended in order to detect PTCCH at fn%52 = 38.
See also 3GPP TS 05.02, Clause 7, Table 6 of 9
Change-Id: Ia6f3333121e5e920c5e1d562a081d0a1b58a1153
The ra parameter indicates the reason for the received rach
request. osmo-bts uses the ra parameter to determine if the
received rach request is packet access related. If yes,
osmo-bts will forward the request to the PCU.
In order to determine if the ra is packet related or not,
the higher 4 bits must be equel to 0x7 and at least one of
the lower 4 bits must be zero.
The current method lacks checking of the lower 4 bits. It
would also accept 0b01111111, which is reserved for future
use. This commit extends the check to take also the last
4 bits into accound.
See also: 3GPP TS 04.08, Table 9.9
Change-Id: I5eb88c42a91e158d9bfa4105ec9636035baf8959
Move rxgain and tx-attenuation (power) parameters from phy_link layer to phy_inst layer.
Rxgain and tx-attenuation parameters should be set for each phy_inst and send for each osmo-trx channel accordingly via control commands.
Change-Id: I4861a59d10d1ef91954e0c6ea265e66dec08844f
It seems more user friendly to look at a calibration table in terms of
the delta (positive or negative) compared to the nominal gain value,
rather than a collection of absolute gain values. It has the added
benefit that the (API/data model) user doesn't have to specify a gain
value for each ARFCN, but rather can rely on the default nominal gain in
absence of a calibration table for this specific unit.
Change-Id: I7311815902a88d2fc9d211cf4c62fa6fdc5e86ad
Improve state handling for for lock/unlock of OC_RADIO_CARRIER obj class. in
bts_model_chg_adm_state()
Change-Id: I034114beca95210169429d8ac1eb8648df12fc6c
Fix SID_FIRST_INH detection during speech and when SID_FIRST is interrupted by FACCH.
Fix SID_UPDATE_INH detection during silence and when SID_UPDATE is interrupted by FACCH.
Add a delay for SID_FIRST to appear at the right time after FACCH.
Fix extra byte sent in downlink for SID_FIRST and SID_UPDATE.
Change-Id: Ia811305e15541f2376005df736bd610e8b0d2f69
* make oml_tx_failure_event_rep() static and use osmo_signal_dispatch()
wrapped into oml_fail_rep() to trigger event reports outside of oml.c
instead of directly calling into OML layer
* remove unnecessary formatting from text messages
Related: OS#1615
Change-Id: I738555c547926e97b325ab53763c0076c42309bc
Currently the IP address where the control interface is bound
to is hardcoded to 127.0.0.1. This leads to problems with
multiple instances on one and the same machine. This commit
integrates the ctrl interface bind option into the VTY, so
that we can bind the ctrl interface to any IP address, just
like we do it with the VTY already.
Change-Id: If51e0c645c0789a4f4a8c51737fb81fb12f80829
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
* add vty option to manually enable adaptive RTP jitter
buffering (disabled by default) on per-bts level
* use this setting on per-lchan level when setting jitter parameters via
vty at runtime
* check and log result of osmo_rtp_socket_set_param()
* note: older libosmo-abis will ignore this setting which will be
properly detected via return value
* if jitter buffer is disabled by configuring "rtp jitter-buffer 0" than
adaptive buffering is disabled as well but it will be used if jitter
buffer is set to different value for a givel lchan via vty
Change-Id: I489f3c419039f40b57c2ef0641c176478b8d3566
Having RTP metadata is useful for debugging - save Sequence Number and
Timestamp next to Marker bit from RTP header.
Change-Id: I359b3bcb74fbfc071547fe2f9d837829374fe997
Do not assume that 1 == BS_AG_BLKS_RES but take that information from
SI3. Note: due to current implementation quirks we activate channels
before SI3 obtained, than we deactivate channels upon receiving SI3 and
activate them again. This might not be necessary once we migrate to
proper OML state machines.
This affects lc15 and sysmo hw.
Change-Id: I11377b12680ac3b2f77f80e742b6f0af63fc9c1e
Related: OS#1575
Remove lchan deactivation related code duplication to facilitate future
use for dynamic CCCH re-activation.
Change-Id: Id0d3b19dbfaa16d1734321a07a6eb0355bfd77c9
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
It was moved to OpenBSC in 582e4f627674f46310a90d9061e82fb342051b42 as
it's used by both projects.
Change-Id: I8aba987e3cdaa840cf3e14913a8455b0ba759889
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
SDCCH occupy lchan 0..3 in combined configuration so for CCCH we've
always used lchan[4] - replace it with CCCH_LCHAN define and add
comment.
Change-Id: Ic5d742c292d638f119c6b4672120c1950adeb7f0
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33b)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
Use "impossible" dummy value to initialize last_fn to prevent dropping
of 1st RTP frame due to timestamp jump.
Fixes: OS#1803
Change-Id: I485af21f6761048d12dc7f5552fcdd46daf786ed
The multi-trx had to be removed because of build conflicts
with octphy header that lack the struct members for needed
to support multi-trx.
For details see the following revert-commits:
ed6b48e4a5c9a1f284ac
This commit reintroduces multi trx support and ads an ifdef
decision to ensure that header files without multi-trx
support still work.
Change-Id: I7f9b2906cc149c817183745b4c96bcc7f9ebdad0
Move code from tch.c (lc15, sysmo) into generic function which:
- check if talkspurt is happening
- cache SID if necessary or invalidate cache
- fill in CMR & CMI prefix
This also fixes the problem when SID FIRST was cached without sending
just like SID UPDATE instead of being sent right away.
Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
* consolidate AMR CMR and CMI handling in common/amr.c
* use it in save_last_sid()
* remove dead code
* properly compute RTP payload length for AMR
* use save_last_sid() for FR & HR as well
* invalidate cached SID if SPEECH frame is received
Fixes: OS #1800, #1801
Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
Note: this also require changes to properly link against libosmocodec -
see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore.
Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
If Marker bit is set than it's a talkspurt which we have to explicitly
indicate to L1 by first sending ONSET message and than actual voice
data in a separate message.
This change affect sysmobts and LC15 hw.
Change-Id: I88c41568bcb0d82699f617adc4ad192603dd1bb6
Related: OS#1750
Previously SID retransmission was scheduled incorrectly based on GSM
frames instead of voice frames. Fix this by using GSM Fn only as elapsed
time estimation:
* move saved SID retransmission into generic function from lc15 and sysmo
specific code
* split retransmission time check into separate generic function
* compute estimation for elapsed time since last retransmission using
GSM Fn
Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8
Fixes: OS#1799
This reverts commit 06968beab9.
Theoretically, this patch makes a lot of sense, but in order to be able to
build osmo-bts-octphy until the headers version is clarified, revert use of
usCentreArfcn:
Above commit uses an usCentreArfcn member that is never defined in the history
of our octphy-2g-headers.git. This usCentreArfcn does exist in a code snapshot
OCTSDR-2G-02.05.00-B780-DEBUG, which is not (yet?) publicly available.
Also, the current headers version is apparently 02.07, though the octasic
version numbers have been known to cause confusion among osmocom folks.
This along with one other revert fixes this build problem:
make[3]: Entering directory '/n/s/octphy/git/osmo-bts/src/osmo-bts-octphy'
CC l1_oml.o
l1_oml.c: In function ‘l1if_trx_open’:
l1_oml.c:1350:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = plink->u.octphy.center_arfcn;
^
l1_oml.c:1352:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = trx->arfcn;
^
In file included from ../../include/osmo-bts/logging.h:5:0,
from l1_oml.c:33:
l1_oml.c:1365:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn, oc->Config.usTsc, oc->RfConfig.ulRxGainDb,
^
Change-Id: I222766f6961f5f35aa3651e2907e3e908fe9a66e
Prepare for a dyn TS patch that needs to call rsl_tx_chan_act_ack() directly
without the rel_act_kind decision.
Add function rsl_tx_chan_act_acknack() to wrap rsl_tx_chan_act_ack() and
rsl_tx_chan_act_nack(). Move the decision whether to drop the ack/nack, based
on lchan->rel_act_kind, to the new function, losing some code dup.
Change all callers to use the new function; drop the two older ones from rsl.h
and make them static.
Note: for nack, the exception for dyn TS in PDCH mode was missing
(rsl_tx_chan_act_nack() had only the rel_act_kind != LCHAN_REL_ACT_RSL
condition, but should also have had the dyn TS exception as in
rsl_tx_chan_act_ack()). I already know that this exception will again be
removed in an upcoming commit, but for patch readability it logically makes
sense to add it here. To easily include the nack case, drop the check for which
pchan the dyn TS is operating as, because a rel_act_kind == LCHAN_REL_ACT_PCU
implies that it is either already in or trying to become PDCH mode.
Change-Id: I57ba60c670730c6d7877a6a9b96ece0a7679a0bb
Have one common ts_is_pdch(), placed in lchan.c, since this file is pretty
empty and pretty close to ts. Publish in gsm_data.h.
Remove the if-style implementation from l1sap.c, and instead implement in a
switch statement.
This prepares for upcoming ts_is_pdch() usage in ph_data_req() for sysmo and
lc15.
Change-Id: Ib78d663fdbac5a1d7053f1b9d543649b66da00e2
Interface structure between osmo-bts and osmo-pcu is updated with the
parameters to differentiate the type of RACH and further support 11 bit
RACH. The function prototype and definitions are changed accordingly.
Interface version number is increased.
Change-Id: I4f4c501b2d86d77c78de32a84b1804172ffb6f4d
Harald Welte
Vadim Yanitskiy
Philipp Maier
Pau Espin
Neels Hofmeyr