The radio link quality is defined by C/I (Carrier-to-Interference
ratio), which is computed from the training sequence of each
received burst, by comparing the "ideal" training sequence with
the actual (received) one.
Link quality measurements are used by L1SAP to filter out "ghost"
Access Bursts, and by the link quality adaptation algorithms. One
can define minimum link quality values using the VTY interface.
On the VTY interface we expect integer C/I values in centiBels
(cB, 10e-2 B), while the internal structures are using float
values in deciBels (dB, 10e-1 B). Some PHYs (sysmo, octphy,
oc2g, and litecell15) expose C/I measurements in deciBels,
while on the L1SAP interface we finally send then in centiBels.
Let's avoid this confusion and stick to a single format, that
will be used by the internal logic of OsmoBTS - integer values
(int16_t) in centiBels. This will give us the range of:
-32768 .. 32767 centiBels, or
-3276.8 .. 3276.7 deciBels,
which is certainly sufficient.
Change-Id: If624d6fdc0270e6813af8700d95f1345903c8a01
This will generate the VTY/counter documentation for osmo-bts-virtual so
it will be missing documentation for device-specific commands/counters.
Change-Id: Idebb099b69924d6212db119f7a2f2861d4150d7e
Related: OS#1700
In the following commit, we introduced transmitting the
RSL DELETE INDICATION on AGCH overflow:
commit 19da7fdea8
Author: Harald Welte <laforge@gnumonks.org>
Date: Sat Feb 24 04:32:29 2018 +0100
So let's sync the manual with the code.
Change-Id: I988778bdb83271355dc11b1a30a59e1a5dba5fb2
Related: OS#2990
We meanwhile support the SMSCB Channel Indicator IE and hence
can send SMSCB on both BASIC as well as EXTENDED CBCH
Change-Id: I63cc9c8c4c8c80440a61a0687e1f0cb97cc723b7
This reverts commit ad7b8bee71.
Unfortunately the osmo-gsm-manuals-dev package isn't working properly
yet, therefore osmo-bts fails to build on nightly OBS now. My apologies
for not testing enough in my own OBS namespace, before merging. I'll do
that in the future. I'm reverting the patch now, so osmo-bts isn't
missing from the nightly repository until I've fixed the
osmo-gsm-manuals package.
Change-Id: I89c2b92c8ae6331d6fff95a378fb58d82059af13
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I728ebb56ade6dda079a0744c4e592284e1bea4f6
Surrounding with '@' didn't seem to yield the intended result, the
charactars appeared in the compiled document.
Change-Id: I66e7949fa4a6c2164bf9572a2beaf8ace169fa1c
This chapter defines the protocol used between osmo-trx and
osmo-bts-trx.
Most of the text comes originally from osmo-trx.git/README, as it's the
only known documentation of the protocol other than the code itself.
Change-Id: I56c418eef0f826ae1aadbed5b151fbed241c7885
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
Add high level description on and a config example for dynamic timeslots in a
new chapter featured in the OsmoBSC and OsmoNITB manuals.
From the OsmoBTS manual's chapter on dynamic timeslots, add references to the
above.
Change-Id: I44ff1e4c2340c65ff23e85408fc6d6a45ea9e046
Add it to Makefile with proper docinfo so it's build automatically
alongside with other documentation.
Change-Id: Iacd7fadc003ce0f9ffd20aa5b36c7d598b04f882
Add two new chapters contributed by Nutaq:
* TCH/AFS Downlink: Inhibiting a SID_FIRST frame
* TCH/AFS Downlink: FACCH/F During DTX Operation
Change-Id: Ic39d035f9d17bd0634c2df78ae3359a5eb7dfd46
Below commit accidentally removed osmobts-abis.pdf from the Makefile entirely.
The pdf was re-added, but the dependencies are still missing, so that
osmobts-abis.pdf is not rebuilt when abis/* is newer. Fix that.
Culprit: 05f5adbe837f2cbfb9301cdb8c9b454ca0bfc825
"OsmoBTS: add vty reference documentation"
Half-fix: 707827196f0734eefa74ce0c35c2ab2fe754cc4c
"OsmoBTS: generate osmobts-abis.pdf again"
Change-Id: Id2ee8177cfb8eb58409d164bdd994ef5e86ad82b
Split both of the lengthy mscgen generated ladder diagrams in two so that the
diagrams are split over two pages and don't bleed into the page footer.
Change-Id: If90250123a85cd275f07c69ee64c6e10a7269f06
Unfortunately a glob like osmo-x__*.{svg,png} doesn't work, so have the
suffixes in separate globs.
Add dashes to indicate that failure should be ignored.
Change-Id: I6bc4d9ea72b43a573acbc860c23397f748de2c7b
There were two separate sections saying basically the same. Move the
entire 'Dynamic Channel Combinations' section further above and combine
with the 'IPA Style PDCH Management' section to avoid repetition.
Change-Id: Ic370ba34de5cb14f0194ff8c8661e45d7ca98e2b
Generate *.check files from asciidoc output and grep for WARNINGs.
Add *.check files to gitignore and to 'make clean'.
Change-Id: Ibccc83a3415930a528f2e8e4e4dda3b81c6d0b64
The section 'Osmocom Style Dynamic Channels' ended in mid-sentence without
naming any of the hard facts. Complete that.
Add section links.
Change-Id: Ib92895fe1bb89fb1b14dc8fcbd88b98bbb6edeee