All config file examples must be listed in EXTRA_DIST unconditionally.
Adding them conditionally results in incomplete release tarballs,
containing only 'osmo-bts-virtual.cfg' and failing to build.
Change-Id: I167027afde3cee40a3b52adfaec7bde91ba896da
Related: OS#6349
* Remove deprecated configuration options:
'osmotrx timing-advance-loop' is deprecated, Timing Advance loop is now active by default
'osmotrx ms-power-loop <-127-127>' is deprecated, MS Power Control is now managed by BSC
* Adjust 'ipa unit-id' (1801 -> 6969) to match the one from the example osmo-bsc.cfg
* Set clock advance values to known working values:
+ 'osmotrx fn-advance' -> 20
+ 'osmotrx rts-advance' -> 5
* Set 'nominal-tx-power' since the calypso-bts tranceiver does not support NOMTXPOWER
Change-Id: I69436b914cf1bec57f9fe7acea4a896e7c46b3a9
This is not the right place to ship configuration examples for
other projects, and definitely not for abandoned ones.
Change-Id: Ib165b16f948126df8023bb42ad5d6d4b2fc11e6a
The sample configs supplied within the doc/trx directory set the
rx-gain parameter to 1. A low value like this may cause a noticeable
degration of rx performance (For an USRP B200 an rx-gain of 38dbm is
recommended). Lets remove this seting from the sample configuration to
allow the default settings in osmo-trx to be applied.
Change-Id: I76be1739b638b3c1b0de5ac667eed53397631caa
Related: OS#4467
Fix error while starting osmo-bts-virtual with the example config:
"This BTS model has no DSP/HW MS Power Control support"
Fixes: c693067b7e ("Introduce BTS feature BTS_FEAT_MS_PWR_CTRL_DSP")
Change-Id: I4f9a06e85d58294719a24197eb1c42a69fbd03d6
We used to permit multiple spaces to enter a new node in the config,
but modern osmo* code writes config files well-formed where every node
equals exactly one indent level.
Change-Id: I3da56b34e87503c46e6bf3c7505b83ec5e6aaa20
Change cfg file names so they don't overlap when installing different
osmo-bts versions, and make systemd services look for correct new name.
Remove unneeded duplicated EXTRA_DIST files from root dir Makefile.am
Change-Id: I75fdd06cc52ce50628efb1f9b007d2e3926db27d
Files from doc/examples/foo/bar.cfg are install to
/usr/share/doc/osmo-bts/examples/osmo-bts-foo/bar.cfg.
Change-Id: I7525d5a3e1a3c83a54f919cce9096303dd506f35
CalypsoBTS is a regular osmo-bts-trx with specific config options, so
let's move the cfg file to correct place. This also makes it easier to
install and package example files later on.
Change-Id: Ie2b968c478f1cf4d3e4cb36e4fb743e413cc93f0
Despite the CalypsoBTS transceiver is similar to OsmoTRX, there
are some changes required to make it work with OsmoBTS. Let's
add a new configuration example for that.
Change-Id: Ia4b1797de576ab987b05046aa9a9828858023ed3
I was unable to start osmo-bts-lc15 with this config file until this
change was made, it said this command didn't exist.
Change-Id: Iae80e2ed504b5e26d748d57be7558ce470555f97
On 'write file':
- Write 'osmotrx' before 'maxdly' and 'maxdlynb' (broken since "Introduce new
phy_link and phy_instance abstraction"
d784e50747)
- Fix indenting of 'write file' output, command 'osmotrx timing-advance-loop',
had a stray space in case there is not a 'no' preceding it.
Add some missing instances of OSMOTRX_STR doc strings.
examples/osmo-bts.cfg:
- Drop 'settsc', the command no longer exists.
- Fix indenting of 'osmotrx rx-gain' command.
osmo-bts does not feature VTY tests, so it is pointless to add example files to
test these fixes. We should probably add VTY tests separately. However, I have
briefly tested manually (and hence found all of these issues).
Change-Id: I018eaef40345bfa26e12eb7d09e83a52596c1000
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
* copy sysmobts-mgr.cfg to sysmo/ directory
* add lc15bts-mgr.cfg
The configuration is BTS-specific so it should be located inside
appropriate subdirs.
Note: the old copy of sysmobts-mgr.cfg can be removed once the image
build recipes are adjusted.
Change-Id: Ic81197464809ba508b2572e86dd978a994f4b116
Related: SYS#3686
Harald is right and that the code is generally not ready
for inclusion. I fell victim of trying to finish it while
the code is not ready at all. It is better to re-introduce
the patches in a smaller and more tested way.
The right way would have been a branch were ready things
are split-off the main/wip commit until everything is ready.
Revert "sysmobts: Have a common prefix for the enum"
This reverts commit 44980347f3.
Revert "utils: Used the enum manuf_type_id in the parameter of add_manufacturer_id_label"
This reverts commit 7d36e5ed46.
Revert "utils: Classify the OML message using the return type"
This reverts commit afee0b7929.
Revert "sysmobts: Do not access out of bound string"
This reverts commit f5f41e8051.
Revert "sysmobts: Separate IPA and OML check into two methods"
This reverts commit 13a224063d.
Revert "screenrc: osmobts-mgr now needs a config file"
This reverts commit 0a1699ff8a.
Revert "make sure osmobts-mgr.cfg file is included in tarballs"
This reverts commit 14c60b425f.
Revert "sysmobts-mgr: Add VTY support for configuring it"
This reverts commit c5fedd24c9.
Revert "sysmobts: Add beginnings of an OML router and create Failure Messages in the sysmobts-manager"
This reverts commit c6ab90b270.
This patch allows to configure the warning temperature threshold,
the severe temperature threshold of the board and the PA and the
actions like the relative value power that we want to reduce the
transmit power to and the part that we want to switch off or not.
Signed-off-by: Alvaro Neira Ayuso <anayuso@sysmocom.de>
Vadim Yanitskiy
Andreas Eversberg
Martin Hauke
Philipp Maier
Oliver Smith
Daniel Willmann
Harald Welte
Pau Espin