In the following commit, we introduced transmitting the
RSL DELETE INDICATION on AGCH overflow:
commit 19da7fdea8
Author: Harald Welte <laforge@gnumonks.org>
Date: Sat Feb 24 04:32:29 2018 +0100
So let's sync the manual with the code.
Change-Id: I988778bdb83271355dc11b1a30a59e1a5dba5fb2
Related: OS#2990
We meanwhile support the SMSCB Channel Indicator IE and hence
can send SMSCB on both BASIC as well as EXTENDED CBCH
Change-Id: I63cc9c8c4c8c80440a61a0687e1f0cb97cc723b7
This reverts commit ad7b8bee71.
Unfortunately the osmo-gsm-manuals-dev package isn't working properly
yet, therefore osmo-bts fails to build on nightly OBS now. My apologies
for not testing enough in my own OBS namespace, before merging. I'll do
that in the future. I'm reverting the patch now, so osmo-bts isn't
missing from the nightly repository until I've fixed the
osmo-gsm-manuals package.
Change-Id: I89c2b92c8ae6331d6fff95a378fb58d82059af13
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I728ebb56ade6dda079a0744c4e592284e1bea4f6
Surrounding with '@' didn't seem to yield the intended result, the
charactars appeared in the compiled document.
Change-Id: I66e7949fa4a6c2164bf9572a2beaf8ace169fa1c
This chapter defines the protocol used between osmo-trx and
osmo-bts-trx.
Most of the text comes originally from osmo-trx.git/README, as it's the
only known documentation of the protocol other than the code itself.
Change-Id: I56c418eef0f826ae1aadbed5b151fbed241c7885
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
Add high level description on and a config example for dynamic timeslots in a
new chapter featured in the OsmoBSC and OsmoNITB manuals.
From the OsmoBTS manual's chapter on dynamic timeslots, add references to the
above.
Change-Id: I44ff1e4c2340c65ff23e85408fc6d6a45ea9e046
Add it to Makefile with proper docinfo so it's build automatically
alongside with other documentation.
Change-Id: Iacd7fadc003ce0f9ffd20aa5b36c7d598b04f882
Add two new chapters contributed by Nutaq:
* TCH/AFS Downlink: Inhibiting a SID_FIRST frame
* TCH/AFS Downlink: FACCH/F During DTX Operation
Change-Id: Ic39d035f9d17bd0634c2df78ae3359a5eb7dfd46
Below commit accidentally removed osmobts-abis.pdf from the Makefile entirely.
The pdf was re-added, but the dependencies are still missing, so that
osmobts-abis.pdf is not rebuilt when abis/* is newer. Fix that.
Culprit: 05f5adbe837f2cbfb9301cdb8c9b454ca0bfc825
"OsmoBTS: add vty reference documentation"
Half-fix: 707827196f0734eefa74ce0c35c2ab2fe754cc4c
"OsmoBTS: generate osmobts-abis.pdf again"
Change-Id: Id2ee8177cfb8eb58409d164bdd994ef5e86ad82b
Split both of the lengthy mscgen generated ladder diagrams in two so that the
diagrams are split over two pages and don't bleed into the page footer.
Change-Id: If90250123a85cd275f07c69ee64c6e10a7269f06
Unfortunately a glob like osmo-x__*.{svg,png} doesn't work, so have the
suffixes in separate globs.
Add dashes to indicate that failure should be ignored.
Change-Id: I6bc4d9ea72b43a573acbc860c23397f748de2c7b
There were two separate sections saying basically the same. Move the
entire 'Dynamic Channel Combinations' section further above and combine
with the 'IPA Style PDCH Management' section to avoid repetition.
Change-Id: Ic370ba34de5cb14f0194ff8c8661e45d7ca98e2b
Generate *.check files from asciidoc output and grep for WARNINGs.
Add *.check files to gitignore and to 'make clean'.
Change-Id: Ibccc83a3415930a528f2e8e4e4dda3b81c6d0b64
The section 'Osmocom Style Dynamic Channels' ended in mid-sentence without
naming any of the hard facts. Complete that.
Add section links.
Change-Id: Ib92895fe1bb89fb1b14dc8fcbd88b98bbb6edeee
Consistently name the PDCH act methid 'IPA style', name ip.access only once
in the 'IPA Style Dynamic Channels' section.
Consistently write 'IPA style' without hyphen (not 'IPA-style').
Capitalize section headers ('IPA Style').
Change-Id: I91112c2d8af9424ebe7e1972fd4ef9c77d24a7b4
In effect, this fixes the dangling references from the table of RSL messages
with additions/limitations to the Chan Act message description.
Change-Id: Ic6f83f016ce9ec90af7eb0af1b1f71a10263915d
Including the required changes of the Makefile which is now simliar
as the other projects Makefile's.
Based on: OsmoBTS 0.3.0.283-f869
Change-Id: Id7362ce1c584b1926330b93770d68453e091c71c
The act ack for switchover to PDCH is now issued immediately, after
commit 'dyn TS: if PCU is not connected, allow operation as TCH'.
Adjust the chart accordingly.
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
We used to permit multiple spaces to enter a new node in the config,
but modern osmo* code writes config files well-formed where every node
equals exactly one indent level.
Change-Id: I3da56b34e87503c46e6bf3c7505b83ec5e6aaa20
Change cfg file names so they don't overlap when installing different
osmo-bts versions, and make systemd services look for correct new name.
Remove unneeded duplicated EXTRA_DIST files from root dir Makefile.am
Change-Id: I75fdd06cc52ce50628efb1f9b007d2e3926db27d
Files from doc/examples/foo/bar.cfg are install to
/usr/share/doc/osmo-bts/examples/osmo-bts-foo/bar.cfg.
Change-Id: I7525d5a3e1a3c83a54f919cce9096303dd506f35
CalypsoBTS is a regular osmo-bts-trx with specific config options, so
let's move the cfg file to correct place. This also makes it easier to
install and package example files later on.
Change-Id: Ie2b968c478f1cf4d3e4cb36e4fb743e413cc93f0
Completely drop bts_log_init(), call osmo_init_logging2() directly instead: all
callers of bts_log_init() passed NULL as category string, so all it ever did
was call osmo_init_logging(). The bts_log_info is already declared in the .h.
Here and there also define a proper talloc root context instead of using NULL.
Change-Id: Ic049f77bef74123b95350bcae182a468e0086b9c
Despite the CalypsoBTS transceiver is similar to OsmoTRX, there
are some changes required to make it work with OsmoBTS. Let's
add a new configuration example for that.
Change-Id: Ia4b1797de576ab987b05046aa9a9828858023ed3
I was unable to start osmo-bts-lc15 with this config file until this
change was made, it said this command didn't exist.
Change-Id: Iae80e2ed504b5e26d748d57be7558ce470555f97
On 'write file':
- Write 'osmotrx' before 'maxdly' and 'maxdlynb' (broken since "Introduce new
phy_link and phy_instance abstraction"
d784e50747)
- Fix indenting of 'write file' output, command 'osmotrx timing-advance-loop',
had a stray space in case there is not a 'no' preceding it.
Add some missing instances of OSMOTRX_STR doc strings.
examples/osmo-bts.cfg:
- Drop 'settsc', the command no longer exists.
- Fix indenting of 'osmotrx rx-gain' command.
osmo-bts does not feature VTY tests, so it is pointless to add example files to
test these fixes. We should probably add VTY tests separately. However, I have
briefly tested manually (and hence found all of these issues).
Change-Id: I018eaef40345bfa26e12eb7d09e83a52596c1000
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
* copy sysmobts-mgr.cfg to sysmo/ directory
* add lc15bts-mgr.cfg
The configuration is BTS-specific so it should be located inside
appropriate subdirs.
Note: the old copy of sysmobts-mgr.cfg can be removed once the image
build recipes are adjusted.
Change-Id: Ic81197464809ba508b2572e86dd978a994f4b116
Related: SYS#3686
Also remove related cruft: .gitignore, msc-README and adjust an in-code
comment that referenced dyn_pdch.msc.
Change-Id: Ie41a453bb5070c1f18793f646dc053a978f43fba
Harald is right and that the code is generally not ready
for inclusion. I fell victim of trying to finish it while
the code is not ready at all. It is better to re-introduce
the patches in a smaller and more tested way.
The right way would have been a branch were ready things
are split-off the main/wip commit until everything is ready.
Revert "sysmobts: Have a common prefix for the enum"
This reverts commit 44980347f3.
Revert "utils: Used the enum manuf_type_id in the parameter of add_manufacturer_id_label"
This reverts commit 7d36e5ed46.
Revert "utils: Classify the OML message using the return type"
This reverts commit afee0b7929.
Revert "sysmobts: Do not access out of bound string"
This reverts commit f5f41e8051.
Revert "sysmobts: Separate IPA and OML check into two methods"
This reverts commit 13a224063d.
Revert "screenrc: osmobts-mgr now needs a config file"
This reverts commit 0a1699ff8a.
Revert "make sure osmobts-mgr.cfg file is included in tarballs"
This reverts commit 14c60b425f.
Revert "sysmobts-mgr: Add VTY support for configuring it"
This reverts commit c5fedd24c9.
Revert "sysmobts: Add beginnings of an OML router and create Failure Messages in the sysmobts-manager"
This reverts commit c6ab90b270.
This patch allows to configure the warning temperature threshold,
the severe temperature threshold of the board and the PA and the
actions like the relative value power that we want to reduce the
transmit power to and the part that we want to switch off or not.
Signed-off-by: Alvaro Neira Ayuso <anayuso@sysmocom.de>
Harald Welte
Oliver Smith
Daniel Willmann
Neels Hofmeyr
Pau Espin
Philipp Maier
Neels Hofmeyr