167 lines
10 KiB
Plaintext
167 lines
10 KiB
Plaintext
OsmoBSC> enable
|
|
|
|
OsmoBSC# show timer
|
|
net: T4 = 5 s Timeout to receive BSSMAP RESET ACKNOWLEDGE from the MSC (default: 5 s)
|
|
net: T7 = 10 s inter-BSC/MSC Handover outgoing, BSSMAP HO Required to HO Command timeout (default: 10 s)
|
|
net: T8 = 10 s inter-BSC/MSC Handover outgoing, BSSMAP HO Command to final Clear timeout (default: 10 s)
|
|
net: T10 = 6 s RR Assignment (default: 6 s)
|
|
net: T101 = 10 s inter-BSC/MSC Handover incoming, BSSMAP HO Request to HO Accept (default: 10 s)
|
|
net: T3101 = 3 s RR Immediate Assignment (default: 3 s)
|
|
net: T3103 = 5 s Handover (default: 5 s)
|
|
net: T3105 = 100 ms Physical Information (default: 100 ms)
|
|
net: T3107 = 5 s (unused) (default: 5 s)
|
|
net: T3109 = 5 s RSL SACCH deactivation (default: 5 s)
|
|
net: T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
net: T3113 = 7 s Paging (default: 7 s)
|
|
net: T3115 = 10 s (unused) (default: 10 s)
|
|
net: T3117 = 10 s (unused) (default: 10 s)
|
|
net: T3119 = 10 s (unused) (default: 10 s)
|
|
net: T3122 = 10 s Wait time after RR Immediate Assignment Reject (default: 10 s)
|
|
net: T3141 = 10 s (unused) (default: 10 s)
|
|
net: T3212 = 5 Periodic Location Update timer, sent to MS (1 = 6 minutes) (default: 5)
|
|
net: X4 = 60 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|
|
net: X5 = 5 s Timeout to switch dynamic timeslot PCHAN modes (default: 5 s)
|
|
net: X6 = 5 s Timeout for RSL Channel Activate ACK after sending RSL Channel Activate (default: 5 s)
|
|
net: X7 = 5 s Timeout for RSL IPA CRCX ACK after sending RSL IPA CRCX (default: 5 s)
|
|
net: X8 = 5 s Timeout for RSL IPA MDCX ACK after sending RSL IPA MDCX (default: 5 s)
|
|
net: X9 = 5 s Timeout for availability of MGW endpoint (default: 5 s)
|
|
net: X10 = 5 s Timeout for fully configured MGW endpoint (default: 5 s)
|
|
net: X11 = 5 s Timeout for Perform Location Response from SMLC (default: 5 s)
|
|
net: X12 = 5 s Timeout for obtaining TA after BSSLAP TA Request (default: 5 s)
|
|
net: X13 = 5 s Timeout for RR Channel Mode Modify ACK (BSC <-> MS) (default: 5 s)
|
|
net: X14 = 5 s Timeout for RSL Channel Mode Modify ACK (BSC <-> BTS) (default: 5 s)
|
|
net: X16 = 1000 ms Granularity for all_allocated:* rate counters: amount of milliseconds that one counter increment represents. See also X17, X18 (default: 1000 ms)
|
|
net: X17 = 0 ms Rounding threshold for all_allocated:* rate counters: round up to the next counter increment after this many milliseconds. If set to half of X16 (or 0), employ the usual round() behavior: round up after half of a granularity period. If set to 1, behave like ceil(): already increment the counter immediately when all channels are allocated. If set >= X16, behave like floor(): only increment after a full X16 period of all channels being occupied. See also X16, X18 (default: 0 ms)
|
|
net: X18 = 60000 ms Forget-sum period for all_allocated:* rate counters: after this amount of idle time, forget internally cumulated time remainders. Zero to always keep remainders. See also X16, X17. (default: 60000 ms)
|
|
net: X25 = 5 s Timeout for initial user data after an MSC initiated an SCCP connection to the BSS (default: 5 s)
|
|
net: X3111 = 4 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
net: X3210 = 20 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
mgw: X2427 = 5 s timeout for MGCP response from MGW (default: 5 s)
|
|
|
|
OsmoBSC# show timer T3111
|
|
T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
|
|
OsmoBSC# # specifically test legacy timers that are moved to X timers
|
|
OsmoBSC# show timer T993111
|
|
% Legacy: timer T993111 is now X3111
|
|
X3111 = 4 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
OsmoBSC# show timer T993210
|
|
% Legacy: timer T993210 is now X3210
|
|
X3210 = 20 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
OsmoBSC# show timer T999
|
|
% Legacy: timer T999 is now X4
|
|
X4 = 60 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|
|
|
|
OsmoBSC# configure terminal
|
|
OsmoBSC(config)# network
|
|
OsmoBSC(config-net)# timer
|
|
net: T4 = 5 s Timeout to receive BSSMAP RESET ACKNOWLEDGE from the MSC (default: 5 s)
|
|
net: T7 = 10 s inter-BSC/MSC Handover outgoing, BSSMAP HO Required to HO Command timeout (default: 10 s)
|
|
net: T8 = 10 s inter-BSC/MSC Handover outgoing, BSSMAP HO Command to final Clear timeout (default: 10 s)
|
|
net: T10 = 6 s RR Assignment (default: 6 s)
|
|
net: T101 = 10 s inter-BSC/MSC Handover incoming, BSSMAP HO Request to HO Accept (default: 10 s)
|
|
net: T3101 = 3 s RR Immediate Assignment (default: 3 s)
|
|
net: T3103 = 5 s Handover (default: 5 s)
|
|
net: T3105 = 100 ms Physical Information (default: 100 ms)
|
|
net: T3107 = 5 s (unused) (default: 5 s)
|
|
net: T3109 = 5 s RSL SACCH deactivation (default: 5 s)
|
|
net: T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
net: T3113 = 7 s Paging (default: 7 s)
|
|
net: T3115 = 10 s (unused) (default: 10 s)
|
|
net: T3117 = 10 s (unused) (default: 10 s)
|
|
net: T3119 = 10 s (unused) (default: 10 s)
|
|
net: T3122 = 10 s Wait time after RR Immediate Assignment Reject (default: 10 s)
|
|
net: T3141 = 10 s (unused) (default: 10 s)
|
|
net: T3212 = 5 Periodic Location Update timer, sent to MS (1 = 6 minutes) (default: 5)
|
|
net: X4 = 60 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|
|
net: X5 = 5 s Timeout to switch dynamic timeslot PCHAN modes (default: 5 s)
|
|
net: X6 = 5 s Timeout for RSL Channel Activate ACK after sending RSL Channel Activate (default: 5 s)
|
|
net: X7 = 5 s Timeout for RSL IPA CRCX ACK after sending RSL IPA CRCX (default: 5 s)
|
|
net: X8 = 5 s Timeout for RSL IPA MDCX ACK after sending RSL IPA MDCX (default: 5 s)
|
|
net: X9 = 5 s Timeout for availability of MGW endpoint (default: 5 s)
|
|
net: X10 = 5 s Timeout for fully configured MGW endpoint (default: 5 s)
|
|
net: X11 = 5 s Timeout for Perform Location Response from SMLC (default: 5 s)
|
|
net: X12 = 5 s Timeout for obtaining TA after BSSLAP TA Request (default: 5 s)
|
|
net: X13 = 5 s Timeout for RR Channel Mode Modify ACK (BSC <-> MS) (default: 5 s)
|
|
net: X14 = 5 s Timeout for RSL Channel Mode Modify ACK (BSC <-> BTS) (default: 5 s)
|
|
net: X16 = 1000 ms Granularity for all_allocated:* rate counters: amount of milliseconds that one counter increment represents. See also X17, X18 (default: 1000 ms)
|
|
net: X17 = 0 ms Rounding threshold for all_allocated:* rate counters: round up to the next counter increment after this many milliseconds. If set to half of X16 (or 0), employ the usual round() behavior: round up after half of a granularity period. If set to 1, behave like ceil(): already increment the counter immediately when all channels are allocated. If set >= X16, behave like floor(): only increment after a full X16 period of all channels being occupied. See also X16, X18 (default: 0 ms)
|
|
net: X18 = 60000 ms Forget-sum period for all_allocated:* rate counters: after this amount of idle time, forget internally cumulated time remainders. Zero to always keep remainders. See also X16, X17. (default: 60000 ms)
|
|
net: X25 = 5 s Timeout for initial user data after an MSC initiated an SCCP connection to the BSS (default: 5 s)
|
|
net: X3111 = 4 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
net: X3210 = 20 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
mgw: X2427 = 5 s timeout for MGCP response from MGW (default: 5 s)
|
|
|
|
OsmoBSC(config-net)# # Using the legacy 'timer Txxx' still works:
|
|
OsmoBSC(config-net)# timer T3111
|
|
T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
OsmoBSC(config-net)# timer T3111 23
|
|
OsmoBSC(config-net)# timer T3111
|
|
T3111 = 23 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
OsmoBSC(config-net)# timer T3111 default
|
|
OsmoBSC(config-net)# timer T3111
|
|
T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
|
|
OsmoBSC(config-net)# # Using the new timer group commands also works:
|
|
OsmoBSC(config-net)# timer net T3111
|
|
net: T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
OsmoBSC(config-net)# timer net T3111 42
|
|
OsmoBSC(config-net)# timer net T3111
|
|
net: T3111 = 42 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
OsmoBSC(config-net)# timer net T3111 default
|
|
OsmoBSC(config-net)# timer net T3111
|
|
net: T3111 = 2 s Wait time before RSL RF Channel Release (default: 2 s)
|
|
OsmoBSC(config-net)# timer mgw
|
|
mgw: X2427 = 5 s timeout for MGCP response from MGW (default: 5 s)
|
|
OsmoBSC(config-net)# timer mgw X2427
|
|
mgw: X2427 = 5 s timeout for MGCP response from MGW (default: 5 s)
|
|
OsmoBSC(config-net)# timer mgw X2427 42
|
|
OsmoBSC(config-net)# timer mgw X2427
|
|
mgw: X2427 = 42 s timeout for MGCP response from MGW (default: 5 s)
|
|
OsmoBSC(config-net)# timer mgw X2427 default
|
|
OsmoBSC(config-net)# timer mgw X2427
|
|
mgw: X2427 = 5 s timeout for MGCP response from MGW (default: 5 s)
|
|
|
|
OsmoBSC(config-net)# # specifically test legacy timers that are moved to X timers
|
|
OsmoBSC(config-net)# timer T993111
|
|
% Legacy: timer T993111 is now X3111
|
|
X3111 = 4 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
OsmoBSC(config-net)# timer T993111 1
|
|
% Legacy: timer T993111 is now X3111
|
|
OsmoBSC(config-net)# timer T993111
|
|
% Legacy: timer T993111 is now X3111
|
|
X3111 = 1 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
OsmoBSC(config-net)# timer T993111 default
|
|
% Legacy: timer T993111 is now X3111
|
|
OsmoBSC(config-net)# timer T993111
|
|
% Legacy: timer T993111 is now X3111
|
|
X3111 = 4 s Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
|
|
|
|
OsmoBSC(config-net)# timer T993210
|
|
% Legacy: timer T993210 is now X3210
|
|
X3210 = 20 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
OsmoBSC(config-net)# timer T993210 2
|
|
% Legacy: timer T993210 is now X3210
|
|
OsmoBSC(config-net)# timer T993210
|
|
% Legacy: timer T993210 is now X3210
|
|
X3210 = 2 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
OsmoBSC(config-net)# timer T993210 default
|
|
% Legacy: timer T993210 is now X3210
|
|
OsmoBSC(config-net)# timer T993210
|
|
% Legacy: timer T993210 is now X3210
|
|
X3210 = 20 s After L3 Complete, wait for MSC to confirm (default: 20 s)
|
|
|
|
OsmoBSC(config-net)# timer T999
|
|
% Legacy: timer T999 is now X4
|
|
X4 = 60 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|
|
OsmoBSC(config-net)# timer T999 3
|
|
% Legacy: timer T999 is now X4
|
|
OsmoBSC(config-net)# timer T999
|
|
% Legacy: timer T999 is now X4
|
|
X4 = 3 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|
|
OsmoBSC(config-net)# timer T999 default
|
|
% Legacy: timer T999 is now X4
|
|
OsmoBSC(config-net)# timer T999
|
|
% Legacy: timer T999 is now X4
|
|
X4 = 60 s After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
|