In the 'lac-ci' and 'cgi' neighbor identity VTY parameters, fix the CI part to
<0-65535>.
Use 65535 as CI in the neighbor_ident.vty test to verify the range.
Change-Id: Ie93bfe176b9d2d9445966e4ab0b928b9aa62a77f
Remove as much as possible from bsc_api.h. Use '#pragma once'. Tweak head
comment.
BSC_API_CONN_POL_{ACCEPT,REJECT}: only user is static complete_layer3(), just
use a bool return value instead.
msc_connected(): only used in osmo_bsc_api.c, make static there.
Instead of including gsm_data.h, declare structs opaquely, include stdint.h.
codec_pref_test.c used this as indirect gsm_data.h include via osmo_bsc.h,
include gsm_data.h there directly.
osmo_bsc.h: instead of including bsc_api.h, declare opaque structs.
gsm_04_08_rr.h: declare opaque structs to replace indirect include of
gsm_data.h.
Change-Id: Ia9c0f9828317236048e40ec9ecf9990592e2190a
gsm0808_page() is just a thin wrapper for rsl_paging_cmd(), the only caller is
page_ms() from paging.c. Directly call rsl_paging_cmd() instead.
Move gsm0808_cipher_mode() to the only caller in osmo_bsc_bssap.c, make static.
Change-Id: Ib7ce026b52d4ba3e53a8b2824e74ea92432c48c5
Before this patch, the timeslot FSM receives OML and RSL ready events.
Afterwards, it relies on examining the RSL and OML status to match the received
events. This doesn't work for the ip.access nanobts, which fails to change the
CHANNEL OM's operational status even though it has sent an Opstart ACK. We
receive OML CHANNEL Opstart ACK, but the mo's state left at OP_STATE=Disabled.
We apparently cannot rely on the gsm_abis_mo state as assumed before this
patch, since changing the state depends on each BTS vendor's OML
implementation.
Also, implementation wise, it is better to not include assumptions on RSL and
OML implementations in the timeslot FSM. Simply receive the OML and RSL ready
events and remember that they arrived in dedicated flags.
Remove the no longer needed oml_is_ts_ready() callback from struct
gsm_bts_model added in:
commit 91aa68f762
"dyn TS: init only when both RSL and the Channel OM are established"
I99f29d2ba079f6f4b77f0af12d9784588d2f56b3
This keeps osmo-bts operational while fixing ip.access nanobts, where the
CHANNEL OM's state prevented the timeslot FSM from entering operation.
Change-Id: I4843d03b3237cdcca0ad2041ef6895ff253d8419
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
"utils" suggests thin helpers to aid using a proper API, while this .c file
actually *is* the proper RR API. Rename from "utils" to "rr".
Change-Id: I0ffff63d57f03cb324df8e40e41caea5b55a2c85
In certain situations like handover or assignment, DTAP must not go out via RSL
directly but is cached to be submitted later. Make sure that all RSL DTAP
sending adheres to this:
gscon_submit_rsl_dtap() is the new "public" API to request an RSL DTAP to be
sent. Depending on the gscon's state, this ends up in the cache or is sent
directly. When caching, there is no way to tell whether sending will succeed or
not, so semantically it does not make sense to even return a result code. Just
return void. Change all "public" callers to gscon_submit_rsl_dtap().
Merge gsm0808_submit_dtap() and submit_dtap() guts to gsm0808_send_rsl_dtap(),
static in bsc_subscr_conn_fsm.c: directly send DTAP, assume a conn->lchan to be
present, or otherwise trigger a BSSMAP Clear Request.
The static submit_dtap() becomes a thin convenience wrapper.
Move ho_dtap_cache* functions to bsc_subscr_conn_fsm.c and rename to
gscon_dtap_cache_* -- they are not only for handover, also for assignment.
Function gsm0808_submit_dtap() m
Introduce function gscon_submit_rsl_dtap()
Change-Id: I6ffd7aa641c8905292c769400048c96aa0949585
9-bit BSIC exist in the 3GPP specs, but we don't use them anywhere. Rather
remove that choice from the API and UI.
Change-Id: I29b92f47da2636d3a19f073755f9382fa98f9010
The vty option bts->codec-support allows the user to set the supported
codecs per BTS level. However, those values are currently only used to
make the handover decision but the logic that handles the BSSMAP
ASSIGNMENT REQUEST does not check those flags.
- Do not ignore bts->codec-support flags on BSSMAP ASSIGNMENT REQUEST
Change-Id: I285234e9c81de74d9fb9907fca2c443b08537435
Closes: OS#3361
At the moment there are three sources that may advertise a list of
supported audio codec/rate settings. There is the MS that advertises
advertises a speech codec list and the MSC that sends a channel type
information element over A and there are also settings in the bsc
configuration file that may restrict the codec/rate types that are
allowed to use.
The function match_codec_pref() looks at all of the three buckets and
selects a codec that satisfies all three. This is already a somewhat
complicated process, overit is very isolated, so lets give it its own
c-file.
Due to the lack of unit-tests it is very hard to make changes here so
lets add also unit-test to make sure that regressions are catched early.
- Put match_codec_pref() and all its helper functions into a separate
c-file.
- Add a unit test.
Change-Id: Iabedfdcec8b99a319f2d57cbea45c5e36c7b6e29
Related: OS#3361
Instead of silently setting the use count to 1, instead increment with an
explicit bsc_subsct_get(), which then logs the event along with the place that
created the subscriber.
Change-Id: Ia72f8010b7b2e1ca44e3b005c0f2c05f3eeae8d5
struct bsc_api was used to provide an abstract API for both osmo-bsc and
osmo-msc, between BSC and MSC. That's no longer needed, so get rid of it, to
prevent code turbulences it creates for no reason.
Change-Id: I3fd5888c63a0b4f95520a498320aa105a6d60579
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
The TEST_SCAN_TO_MSC is completely unused, but still the code linked
bsc_scan_bts_msg() for the unused code path. This is unlikely to ever be
expanded. Remove TEST_SCAN_TO_MSC and reduce linking requirements.
(I am this close to dropping the test entirely to avoid continuous linking
annoyance, but ok, since nothing else tests timezones AFAIK, keeping it.)
Change-Id: I27521950432e412f919cde811c9473557d0ec25e
Rationale: channel_test is trivial and useless, probably only exists as a
legacy from openbsc.git.
- it tests two printf()s of "(bts=45,trx=0,ts=3,ss=4)", hardly useful.
- it tests ts_subslots() behavior for dyn ts, which will soon be replaced by a
most trivial mapping that does no longer need complex dyn ts state
evaluation (when introducing the new timeslot FSM to handle dyn TS switchover).
Change-Id: Ib2232da8e7fa964b92492d7b778320401dc97703
Rationale:
- All it does is compose four Paging Requests and feed it into the osmo-bsc
bssap_udt, and expects the cell identifier to be decoded properly.
- To do so it employs a comparatively huge linking effort. This linking effort
is becoming annoying in my ongoing work and is just not worth it.
- We have comprehensive cell identifier tests in ttcn3, verifying that the
proper cells are paged, and that actually for *all* cell identifier types.
Change-Id: I07cf23b66de36cfa1142a11b9f85e9c0190ee314
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
osmo-bsc_nat is too heavily tied into legacy SCCPlite code, as it
is not using libosmo-sigtran/osmo_ss7 so far. It's also full of
customer-specific code and it's shared use of some libbsc code here
has been complicating osmo-bsc development.
The current plan is to continue to use osmo-bsc_nat from openbsc.git
for those legacy users that need it, and not use osmo-bsc_nat in
new 3GPP AoIP setups. Should we ever get a strong demand for an AoIP
based bsc_nat, we can still revisit this later.
Change-Id: Ia05dc76336a64a7f08962843b9a7cc19f2c83387
At this point, meas-feed is usable again, however, osmo-bsc is not able to
include the IMSI in every report like osmo-nitb did.
In consequence, the meas-vis and meas-web tools are unable to handle the
current measurement reports: these so far use the IMSI to list reports, and all
reports without an IMSI are collapsed onto the same line, swapping values.
So though osmo-bsc now sends usable measurement reports via meas-feed, two
avenues to improve should be pursued:
OS#3192: the visualization tools should use bts,ts,ss numbers, not IMSI.
OS#2969: osmo-bsc should always know a mobile identity.
Related: OS#2968
Change-Id: I186c7a995dd2b81746c32a58b55da64ed195a1ce
There is a lot of dead code in osmo_bsc_msc.c that used to handle
the IPA multiplexed SSCP lite A interface.
- remove portions of the dead code
- remove IPA Ping related VTY commands
Change-Id: I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
gsm_bts_alloc() ought to do all static initialization, so that e.g. unit tests
can use an initialized bts struct that is fully usable, just not registered at
the gsm_network.
For example, two INIT_LLIST_HEAD() and various system information data pointers
(pointing to proper places within the same bts struct) should definitely never
be omitted.
This fixes the remaining errors of gsm0408_test's SI tests, as revealed by a
sanitizer build using gcc (Debian 7.3.0-12) 7.3.0.
Fixes:
../../../../src/osmo-bsc/src/libbsc/system_information.c:613:3: runtime error: null pointer passed as argument 1, which is declared to never be null
Initializing the bts->si_common.rach_control results in different expected
bytes for SI2. The initialized values are
bts->si_common.rach_control.re = 1; /* no re-establishment */
bts->si_common.rach_control.tx_integer = 9; /* 12 slots spread - 217/115 slots delay */
bts->si_common.rach_control.max_trans = 3; /* 7 retransmissions */
bts->si_common.rach_control.t2 = 4; /* no emergency calls */
Causing a change to e5 04. 04 is t2 = 4, and the remaining values are verified by:
uint8_t re :1,
cell_bar :1,
tx_integer :4,
max_trans :2;
>>> hex(1 + (9 << 2) + (3 << 6))
'0xe5'
Change-Id: I13ef24bbe0f1fbe49465e67a0b67d6fd69fff3b1
Add missing deletion of osmo_stat_item_group_free(bts->bts_statg).
Add missing bts free after test_si_ba_ind().
Log deallocation, update expected test output.
This fixes some of the errors of gsm0408_test's SI tests, as revealed by a
sanitizer build using gcc (Debian 7.3.0-12) 7.3.0.
Fixes:
=================================================================
==19273==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d0000004b8 at pc 0x7f1561a94621 bp 0x7ffe7a7a64a0 sp 0x7ffe7a7a6498
WRITE of size 8 at 0x60d0000004b8 thread T0
#0 0x7f1561a94620 in __llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:75
#1 0x7f1561a94620 in llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:90
#2 0x7f1561a94620 in osmo_stat_item_group_alloc ../../../src/libosmocore/src/stat_item.c:141
#3 0x5574f6a19935 in gsm_bts_alloc ../../../../src/osmo-bsc/src/libbsc/gsm_data.c:728
#4 0x5574f6a12920 in bts_init ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:123
#5 0x5574f6a0ddb3 in test_si2q_e ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:192
#6 0x5574f6a0ddb3 in main ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:824
#7 0x7f156061aa86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21a86)
#8 0x5574f6a10339 in _start (/n/s/dev/make/osmo-bsc/tests/gsm0408/gsm0408_test+0xfc339)
Change-Id: I1ebbd8cc0622ce1a061e933813829b1f770072dc
We deliberately ignore errors from page_subscriber() so there is
no point in having a non-void return value.
Provide more context in the error message logged if paging failed.
Add a comment in an implementation override of base_grace_paging_request()
in the test suite to make return value semantics more clear.
Change-Id: Ie18c2ba53d2055d3eaff8c9ed939eb844af6dd2e
Related: I48f5efbcddd98e15256edfca06ba0ae6acb5bab1
The LAI encoding test in gsm0408_test.c uses deprecated API, and a more
thorough test for LAI encoding has been added in libosmocore/test/gsm0408/.
Change-Id: I8a55d717ab15ba23943a2639accaadc33a4f731a
Fixes following compilation warning:
osmo-bsc/tests/handover/handover_test.c:48:83: warning:
‘struct mgcp_conn_peer’ declared inside parameter list will not be visible outside of this definition or declaration
int __real_mgcp_conn_modify(struct osmo_fsm_inst *fi, uint32_t parent_evt, struct mgcp_conn_peer *conn_peer);
^~~~~~~~~~~~~~
Change-Id: I1b5e91adee3daaec71122a7691a214aa8240bce2
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
Until now, handover_test simply defines an abis_rsl_sendmsg() function to
override the one from libosmo-babis. To me this amounts to implicit linker
magic (aka luck).
The common pattern we're using for this scenario is to explicitly wrap an
existing function by instructing the linker. Also do this for
abis_rsl_sendmsg() in handover_test.c to clarify.
Change-Id: I05ce33a4e42bc82b9ce5060e2f811033f5a1f8d8
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ic16bc0bab3f2d4721e86a1a04f9d9f988d777df2
Move from using deprecated gsm48_construct_ra(), which uses a buf, to
gsm48_encode_ra(), which uses a gsm48_ra_id argument. Pass struct gsm48_ra_id
around instead of a buf.
struct gsm48_ra_id is the "encoded" representation of the bytes in a typical
MCC-MNC-LAC-RAC (04.08 Routing Area Id IE, 3GPP TS 24.008 § 10.5.5.15). Using
the struct spares using magic numbers for byte offsets.
In the process, fix a sanitizer warning for unaligned access by using memcpy()
instead of pointer assignment:
osmo-bsc/src/libbsc/abis_nm.c:2857:27: runtime error: store to misaligned address 0x7ffe8e0d6695 for type 'uint16_t', which requires 2 byte alignment
Note that (besides removing a now unnecessary cast) the gsm0408_test and
abis_test tests of RAI / CGI encoding remain stable, which indicates that the
new code is still correct.
Change-Id: I0d3908fb8ca1e2e669d257b5d59b40675fa85d06
Expand MCC-MNC test cases: show that the CTRL interface currently does not
preserve the third digit of the MNC if it is zero. These will be fixed by
I8e722103344186fde118b26d8353db95a4581daa
Change-Id: I5b097dbb6329f284e3b4914a744d5c3ad628f715
In the past we used to set this to "-10 dBm" which means that basically
no RACH ever passed that treshold and in the associated CCCH LOAD IND
the number of busy slots was always zero.
Let's set the default to -90dBm. The user can of course always
configure a different value in the VTY.
This means that now any RACH slot signal level >= 90 dBm counts as
"busy" in those CCCH LOAD IND (RACH).
Change-Id: Ib9cbb786d19acc74f0951930b0dc9284854c6000
Closes: OS#3004
Related: OS#3003
handover_decision_2:
- lchan->conn should never be NULL, but if it is, don't crash in LOGPHO*
macros.
- make certain to avoid modulo-zero. It's cosmetic since that config item is
not allowed to be zero.
handover_test:
- check return value of gsm_generate_si().
- safer evaluation of main()'s argv.
Fixes: CID#182929, CID#182928, CID#182927, CID#182926
Change-Id: I68e8ed3a1e8659edb47ac3e8a10508f17a3f5670
Fix undefined references during link stage when building handover_test.
The archive libbsc.a needs to be listed before the various .so files.
Change-Id: Ie7e1d4815d72b8e0bbc6ccd68078a78de19d73b0
The ALIAS_DEPRECATED causes the legacy commands to no longer show up in the
command listing, hence making it more clear which commands are general and
which are for hodec1 only:
== BEFORE: ==
OsmoBSC(config-net)# list
...
handover (0|1|default)
handover algorithm (1|2|default)
handover1 window rxlev averaging (<1-10>|default)
...
handover2 window rxlev averaging (<1-10>|default)
...
handover2 retries (<0-9>|default)
handover window rxlev averaging (<1-10>|default) <-- legacy
handover window rxqual averaging (<1-10>|default)
handover window rxlev neighbor averaging (<1-10>|default)
handover power budget interval (<1-99>|default)
handover power budget hysteresis (<0-999>|default)
handover maximum distance (<0-9999>|default)
handover2 congestion-check (disabled|<1-999>|now)
OsmoBSC(config-net)# handover ?
0 Disable in-call handover
1 Enable in-call handover
default Enable/disable handover: Use default (0), remove explicit setting on this node
algorithm Choose algorithm for handover decision
window Measurement averaging settings <-- legacy
power Neighbor cell power triggering
maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO
OsmoBSC(config-net)# handover?
handover Handover general config <-- unchanged
== AFTER: ==
OsmoBSC(config-net)# list
...
handover (0|1|default)
handover algorithm (1|2|default)
handover1 window rxlev averaging (<1-10>|default)
...
handover2 window rxlev averaging (<1-10>|default)
...
handover2 retries (<0-9>|default)
handover2 congestion-check (disabled|<1-999>|now) <-- no more legacy
OsmoBSC(config-net)# handover ?
0 Disable in-call handover
1 Enable in-call handover
default Enable/disable handover: Use default (0), remove explicit setting on this node
algorithm Choose algorithm for handover decision
<-- no more legacy
OsmoBSC(config-net)# handover?
handover Handover general config <-- unchanged
The "Legacy" doc string actually never shows on the VTY console, but it will
show in the reference manual.
(Even with ALIAS(), a 'handover?' would only show the "Handover general config"
doc string, so no loss there from using ALIAS_DEPRECATED().)
Change-Id: I86be674d82242f9ca73a4d0040015c1c79f2422d
Neels Hofmeyr
Philipp Maier
Harald Welte
Pau Espin
Keith Whyte