nat: Catch up with controlif_setup API change
We now save a control handle reference in the nat
osmo-bsc: Catch up with controlif_setup API change
We now save a control handle reference in the gsm network
so far, osmo-bts/sysmobts used to be entered as "sysmobts" type in the
configuration file. However, there are some differences in the
protocol/behaviour and we should reflect that by a new BTS plugin (with
lots of code reuse from the nanobts driver).
We want to have multiple MSCs but we also have some data
that is only present on a per BSC basis. Right now the
MSC data is not allocated with talloc, so we have some
change in the talloc contexts.
gsm_data_shared.h includes e1_input.h of libosmo-abis, add the
LIBOSMOABIS_CFLAGS to Makefile.am, remove AM_LDFLAGS at the same
time as we only build .a archives.
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
This should not introduce any functional changes, it just re-arranges
some definitions in the header file, and introduces the ROLE_BSC
define that we enable for the BSC-specific fields.
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
The HSL Femtocell seems to be a poor man implementation of the
ip.access Abis/IP protocol, but cutting corners wherever possible.
We try to workaround those corners wherever possible...
This introducecs the new VTY command "neighbor-list mode manual-si5"
in combination with "si5 neighbor-list (add|del) arfcn <0-1024>",
which allows you to (optionally) have neighbor channel lists that
differ in SI5 and in SI2.
So far, all BTS we have interfaced had one OML link per BTS, independent of the
number of TRX. In Ericsson RBS 2000, there is an OML link for the DXU/IXU,
and one additional OML link for each TRX/TRU.
bsc_init.c was a big mess even only for two supported BTS models,
so before adding more BTS types, this needs a cleanup.
All the BTS specific code from bsc_init.c has now moved into
bts_{siemens_bs11,ipaccess_nanobts}.c
This has required that input_event() and nm_state_event() get both
converted to proper libosmocore signals instead of referencing external
symbols.
So far, OpenBSC simply assumed that all BTS's configured in openbsc.cfg are
neighbors of each other. While this is true for small site installations,
it is definitely not true in most real world cases. We now have the
following new commands at the 'configure bts' level:
'neighbor-list mode (auto|manual)' for selecting the mode
'neighbor-list (add|del) arfcn <0-1024>'
for adding/deleting ARFCN in manual mode
Remember if this channel got opened due a paging response and in
that case when we close it down we will call subscr_put_channel
that will try to page the subscriber again. This highlights the
lack of a good subscriber management in the MSC code.
The SMSqueue will be responsible of sending to the user. It will
do so in a loop and will also try not to overload the BTS. This
means the throughput of SMS will be limited.
Start counting the attempts of each paging request and call
the callback with the PAGING_BUSY type when the paging request
timed out but the subscriber was not paged at all. This can
only happen with a huge paging backlog.
In case the system has so many pending paging
This is implemented by not freeing the subscriber when the
reference count becomes smaller than zero. We hope that this
will save many database accesses during the congres.
Instead of sending many messages we will queue the OML
messages and wait for the ACK/NACK before sending the
next message from the queue. We tag the msgb to remember
if we need to wait for an ack or not.
We keep the order of all messages, on ACKs and similiar
occassions we will drown the queue until we reach a message
that needs to be acked and then wait for that ack again.
Possible breakage can appear when we send an OML (e.g.
BS11 specific message) msg which does not need to be acked
through the abis_nm_sendmsg call. The fix will be to use
the _direct version of this method.
Re-Enable as it might have fixed something... who knows.
Conflicts:
openbsc/include/openbsc/abis_nm.h
openbsc/include/openbsc/gsm_data.h
openbsc/src/abis_nm.c
openbsc/src/gsm_data.c
The default values are those where the parameters are encoded
as '0' and they're not output in the config file if that case
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In case of a inflexible network it is better to hardcode
the rtp payload to a given type. E.g. when using AMR5.9 on
a TCH/F and TCH/H having the same payload is helpful. For
now this will be only used by the osmo-bsc.