osmo-bsc currently negotiates the RTP stream directly with the
BTS and reports back the RTP IP/Port on the BTS. This works fine
for a single BTS, but for Handover the port/ip pointing to the
MSC side must not change, so an entity in between the BTSs and
the MSC is required.
Integrate the mgcp-client and use osmo-mgw to switch the RTP
streams.
Depends: osmo-mgw Ib5fcc72775bf72b489ff79ade36fb345d8d20736
Depends: osmo-mgw I44b338b09de45e1675cedf9737fa72dde72e979a
Depends: osmo-mgw I29c5e2fb972896faeb771ba040f015592487fcbe
Change-Id: Ia2882b7ca31a3219c676986e85045fa08a425d7a
3GPP TS § 08.08 defines various types of Cell Identifier List IEs, but we only
implement "entire BSS" and "one LAC". If the MSC sends a Cell Identifier List
that we don't implement, it is best for interoperability to page the entire BSS
and post a log message instead of rejecting the paging altogether. Apart from
resource management, it is not harmful to page more than the MSC requested; if
use of resources becomes an issue, the log message will guide towards the
solution of providing an actually implemented Cell Identifier List IE.
Upon IE length that is other than we expect, log the error, but also fall back
to paging the entire BSS. Overall message length correctness has been checked
earlier.
The particular case observed is that a Huwaei MSC sends a LAI for Cell
Identifier List (MCC+MNC in bcd, followed by a LAC), parsing of which we may
want to add later.
Improve logging: identify the subscriber that is being paged.
Coding style: use a switch() statement to clarify flow and provide a place to
add more implementations later.
Add regression test bssap_test.c: fabricates BSSAP Paging messages with the two
implemented Cell Identifier List IEs as well as the unimplemented LAI
identifier, verify the resulting paging LAC in wrapped function and stderr.
Change-Id: Ie934c5d229140a89763bf2efff86d6a3766cd351
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: If2edf59a687a78d6db6bc73117a27509374b0fc6
We output a hexdump for each sccp message we receive, but not when
sending.
Also log the hexdump of sccp messages when sending.
Change-Id: Ibfe52a0b7dbca4c569c603a008d73d0d99d1c345
We already log the message type of sccp messages we receive, but
for transmitting the log output is missing.
Also log the message type for tramsitted sccp messages.
Change-Id: I6736f15ddc03e5f70c3504abffbae6cbf766c9d7
A FSM doesn't need "FSM" in its name, as it is obvious that it is a
FSM. Also, having two that are called RESET is confusing, so let's
try to come up with better names.
Also, after Change-Id I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2 in
libosmocore, we now enforce that no FSM identifiers contain spaces
or other illegal characters.
Change-Id: I1b44d26cebc4a47094d7b8b3983e5737b88bf003
The library code for rate counter initialization, which is called
from the descendants of bsc_network_alloc() might already want to
log something (particularly after Change-Id
Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 in libosmocore), so the
logging framework must be initialized before.
Change-Id: I1e893c97e023e63489fe8c46539b5e507d3cec8f
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Philipp Maier
Neels Hofmeyr
Harald Welte
Pau Espin
Neels Hofmeyr