The example config file lacks a default port setting for the local
mgcp client port. Lets update that.
Change-Id: I6b1c5097d98ec2ab97d51f99b1105db3de85c75f
Related: OS#2874
These reflect the plan for refactoring, and will be implemented by
I82e3f918295daa83274a4cf803f046979f284366 and
Id7a4407d9b63be05ce63f5f2768b7d7e3d5c86fb
Change-Id: I29e31b753e23a4207662e0e385a337e7df836f45
Add lchan and timeslot FSM charts to illustrate planning of how osmo-bsc should
handle lchan assignment and release.
Modify assignment, handover, lchan-release charts according to the new plan.
Change-Id: I18d60de5ee932c962aad0a532965a55d570bb936
In doc/, add two message sequence charts with lots of implementation specifics,
to clarify the current code state. Mark various problems in red notes.
This chart and others should help to illustrate future code changes as I go
along refactoring handover, lchan allocation and adding inter-BSC handover.
Change-Id: I20999e938441d4fed2d37462b262b74a696f616d
osmo-bsc_nat is too heavily tied into legacy SCCPlite code, as it
is not using libosmo-sigtran/osmo_ss7 so far. It's also full of
customer-specific code and it's shared use of some libbsc code here
has been complicating osmo-bsc development.
The current plan is to continue to use osmo-bsc_nat from openbsc.git
for those legacy users that need it, and not use osmo-bsc_nat in
new 3GPP AoIP setups. Should we ever get a strong demand for an AoIP
based bsc_nat, we can still revisit this later.
Change-Id: Ia05dc76336a64a7f08962843b9a7cc19f2c83387
There is a lot of dead code in osmo_bsc_msc.c that used to handle
the IPA multiplexed SSCP lite A interface.
- remove portions of the dead code
- remove IPA Ping related VTY commands
Change-Id: I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Handover decision 2 arguments are now configured by 'handover2 foo'. To match
that scheme, rename the previously 'handover foo' args for handover decision 1
to 'handover1 foo'.
For backwards compatibility, still provide aliases of the original VTY
commands. Writing back the config will result in 'handover1' though.
Change-Id: I7305ae7c04cc70082cd80d42b2ba32ffa399f51a
RRLP is handled in OsmoMSC after the split from NITB, so let's remove
any bogus VTY commands left over in the BSC.
Change-Id: Ib626f43a3a3ca69dfc127afe5832eb58f7fb6a38
authentication (optional|required) is no longer needed, the
related decisions are now made in the HLR.
Change-Id: Ib6c6331cc86004c4862067031e4fcb12a6975b63
An upcoming VTY test requires a cfg that doesn't have handover values set.
Prepare for that by adding a minimal BSC config. It is a version further
stripped down from the Osmocom Network In The Box wiki page.
Prepares-for: I00870a5828703cf397776668d3301c0c3a4e033a
Change-Id: Ib68b550a0e9fbb7041e554f358054c0a7931404e
Authentication is no longer done in the BSC, the variables that
set the authentication policy and the IMSI regex have no longer
any effect.
Remove auth policy and authorized-regexp
Change-Id: Ie31b921b5fd0af5501ec0c77c0f08089c10075e2
osmo-bsc now uses osmo-mgw to switch the RTP streams, but there
is no example configuration yet.
Add the missing example configuration.
Change-Id: I4d4ed401bee6c3dfdec2b584bf7248ffb02bddbf
Now osmo-bsc.cfg's SCCP addresses work by internal defaults, while
osmo-bsc_custom-sccp.cfg shows how to use custom STP IP address and SCCP point
codes.
Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd
These either remain from openbsc.git or slipped in while applying recent
patches from openbsc.git and do not belong in osmo-bsc.
Empty out contrib: remove things that are either obviously unrelated to
osmo-bsc, or seem old and/or esoteric.
osmoappdesc.py: drop nitb_e1_configs (and some ws)
Change-Id: Ib20064f35e623d99c7d59496a3156e84b8a0d07a
In SGSN, actually place the port in the SGSN config by default, so that the
gsup port may now be omitted in the VTY config (the IP address suffices).
Adjust the osmo-sgsn.cfg example.
Depends: I4222e21686c823985be8ff1f16b1182be8ad6175 (libosmocore)
Change-Id: I50f2040e2eb0baacb43849e93cfed10cbc2fc156
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
A number of the GSM timers (including T3109) had no reasonable
default values if not specified in the VTY / config file. Together
with unconditional writing to the config file, this created
config files with a persistent setting for important timers as '0'.
To make things worse, many of our example cofig files suffered from the
same problem.
Let's avoid this from happening by
* having reasonable defaults if nothing specified in the config file
* conditionally savingg timers only if they differ from default
* reject any timer values that state zero during start-up (see previous
commit)
Change-Id: Iaac0bfca423852b61d8b9eb1438157ef00d0d8c8
Closes: OS#2380
For the vty tests, add osmo-sgsn-accept-all.cfg (that does not need an HLR) and
use in vty_test_runner.py, otherwise the 'show sgsn' command will reply that it
could not connect to the HLR, failing the vty test which expects empty.
Change-Id: Ie3b2013198d3e2b780a4e31c36b89b58129dcacd
This helps in providing 3G software packages for the sysmoNITB hardware, which
uses 10.23.24.1 for SGSN and 10.23.24.2 for GGSN.
However, in order to not break the python tests, the osmo-sgsn.cfg example
still uses 127.0.0.1 as local address.
Change the GGSN address to 127.0.0.2, because SGSN and GGSN cannot co-exist on
the same address (the GTP port number is fixed by spec: no IE to communicate a
differing port, so it has to be the standard GTP port for both).
Change-Id: Ie3a25f6771ed6e620cb2b315638c622a9a24e530
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
- bscs.config needed by the vty tests was not picked up as a dist file, because
its suffix is not 'cfg'. Rename to *.cfg. Apply this rename in
vty_test_runner.py and osmo-bsc_nat.cfg.
- Remove restart counters after external tests, otherwise distcheck complains
about uncleaned files.
- Add contrib/ipa.py to EXTRA_DIST, hence add a Makefile.am to contrib/.
Otherwise the python tests cannot find that dependency.
Change-Id: I42b55cb1125099afc3a8e3f87c0e398426b2e2a9
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Philipp Maier
Neels Hofmeyr
Harald Welte
Neels Hofmeyr
Daniel Willmann