bts_hsl_femtocell.c: In function ‘hsl_sign_link_up’:
bts_hsl_femtocell.c:206:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘uint64_t’ [-Wformat]
bts_hsl_femtocell.c:210:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘uint64_t’ [-Wformat]
When adding the "omit RTCP" the method started to return with
a proper return statement.
mgcp_network.c: In function ‘send_to’:
mgcp_network.c:233:1: warning: control reaches end of non-void function [-Wreturn-type]
abis_nm.c: In function ‘abis_nm_get_attr’:
abis_nm.c:1380:11: warning: unused variable ‘cur’ [-Wunused-variable]
abis_nm.c: In function ‘ipac_parse_bcch_info’:
abis_nm.c:2588:11: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c:1310:6: warning: variable ‘constructed’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c: At top level:
bts_nokia_site.c:1364:12: warning: ‘dump_elements’ defined but not used [-Wunused-function]
gsm_04_08.c: In function ‘mm_rx_loc_upd_req’:
gsm_04_08.c:521:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
osmo_msc.c: In function ‘msc_ciph_m_compl’:
osmo_msc.c:122:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hslfemto_bootstrap_om’:
bts_hsl_femtocell.c:101:11: warning: variable ‘cur’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hsl_drop_oml’:
bts_hsl_femtocell.c:232:21: warning: variable ‘line’ set but not used [-Wunused-but-set-variable]
handover_logic.c: In function ‘ho_chan_activ_ack’:
handover_logic.c:197:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
gcc does not really know the _NR_OF_ELEMENTS_IN_ENUM approach, add
the _NUM_GSM_BTS_TYPE to the handled cases.
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:349:2: warning: enumeration value ‘_NUM_GSM_BTS_TYPE’ not handled in switch [-Wswitch]
We now have a lchan->csd_mode member that determines if RSL should
activate the channel in CSD transparent services or not. The previous
code always assumed CSD is non-transparent.
(This requires libosmocore >= eed26116c96f03c6128fac3dead9054714af6cab)
Some nodes below 'config' didn't have ournode_exit / ournode_end,
and thus were not able to properly perform this function. exit should
always only go back one level, while end drops us back to ENABLE_NODE.
The prompt now represents the nesting level, and there's one consistent
space after the final prompt character (typically #).
This effectively limits the number of BTSs to 256, but I think that's
acceptable for now. Unfortuantely there's no decent way to dynamically
update the valid number range depending on how many BTSs are actually
configured in the system :/
Use the Smalltalk SIP implementation to create a call
and once the call has been established start the replay
using the commoncode. No patching of RTP occurs yet.
Update/Move/Create example configuration files for NiTB, BSC,
MGCP, NAT and the GbProxy. Create a script that starts, generates
the vty reference and terminates the application.
While generally we should log troly unknown RR messages, we can simply
pass along RRLP messages (which aren't unknown!)
In real networks, the RRLP would probably not end up at the MSC, but
well, sometimes we don't care what real/classic networks do.
A crash was obsserved in cb_data_ind() when mm is dereferenced.
This patch adds some safeguards that try to prevent the library handle
back-pointer to the pdp_ctx to be NULL, and print a stack backtrace in
case we are free() ing the sgsn-side pdp_ctx while there's still a
library handle attached.
The Nokia E71 sends a "IMSI Detach" this msc code does not immediately
send the "RR Channel Release", the E71 is impatient and sends a DISC,
the "RELEASE INDICATION" is handled by starting the channel release
procedure. OpenBSC sends a "RR Channel Release" which will never be
answered, during the early release there is no timer and the lchan will
be in "RELEASE REQUESTED" forever.
This commit removes the anchor operation and checks if the channel can
be released immediately. Regarding the channel release handling there
is already a branch that needs to be tested.
We are currently not checking if the BTS actually suports that cipher,
and we particularly don't have any hack for ip.access which apparently
seems to re-use the RSL algorithm identifier for A5/2.
so far, osmo-bts/sysmobts used to be entered as "sysmobts" type in the
configuration file. However, there are some differences in the
protocol/behaviour and we should reflect that by a new BTS plugin (with
lots of code reuse from the nanobts driver).
like in libosmogsm, we separate between header files that are just
reflecting information in the respective specs, and header files that
related to our specific implementation.
Instead of direct function calls to individual functions, we now
generate primitives (osmo_prim) and send them to one
application-provided function "bssgp_prim_cb()"
The ip.access nanoBTS appears to send quite broken NTP timestamps in
the RTCP messages might confuse equipment that uses the sender report
of the BTS. Make it easy to experiment by adding an option to drop RTCP.
In case the connection should not be created/accepted release
the channel by sending a RR Release and de-activating the
SACCH. Phones should deal better with that behavior.
In case the call handling starts on a TCH/H switch to a TCH/F
if fullrate is requested. Add a method that is used to determine
if the mode and current channel are compatible with each other.
control_if.c:521:2: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat]
osmo_bsc_bssap.c:473:3: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘unsigned int’ [-Wformat]
mgcp_main.c:162:4: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformatt]
We want to have multiple MSCs but we also have some data
that is only present on a per BSC basis. Right now the
MSC data is not allocated with talloc, so we have some
change in the talloc contexts.
osmo_bsc_main.c: In function ‘main’:
osmo_bsc_main.c:398:2: warning: implicit declaration of function ‘bts_init’ [-Wimplicit-function-declaration]
osmo_bsc_main.c:399:2: warning: implicit declaration of function ‘libosmo_abis_init’ [-Wimplicit-function-declaration]
osmo_bsc_main.c:418:2: warning: implicit declaration of function ‘bsc_bootstrap_network’ [-Wimplicit-function-declaration]
Daniel Willmann
Harald Welte
Sylvain Munaut