* Adds vty option dyn-bsc for ms-power-control -> mode
* Imports power_control.c from osmo-bts project
[at commit 2f3cd4b697972d8484f9a9d3b7ef634086f65fa5]
* Removes unused C/I code from osmo-bts's power_control.c
This patch then calls the power loop on receipt of measurement
reports and updates the MS Power Level accordingly.
Change-Id: Ibc307e758697eb5ca3fb86622f35709d6077db9e
From the nature of the lchan_activate_info.tsc_set and .tsc, it is easy
to forget to set tsc_set,tsc = -1 to use default TSC Set and TSC values.
Handover code is one such instance that forgets to set -1.
Change the semantics of tsc_set and tsc so that this kind of error can
not happen again as easily: use a separate bool to flag whether to use
the default config or explicit values.
Implicitly fix the lchan_activate_infos "launched" in handover_fsm.c as
well as abis_rsl_chan_rqd_queue_poll().
Related: OS#5244 SYS#4895
Related: I1ed6f068c85b01e5a2d7b5f2651498a1521f89af (osmo-ttcn3-hacks)
Change-Id: Iae20df4387c3d75752301bd5daeeea7508966393
Improve the current VTY support to allow enabling/disabling C/I logic
independent from value setting. This way C/I support can be quickly
disabled & enabled.
Reminder: changing power parameters still require VTY Command "bts NR
resend-power-control-defaults" to be excuted prior to new parameters
being applied on the BTS.
Related: SYS#4917
Change-Id: Id1224c2d9a52db2ed805c49e048d3086ed0167f5
These commands return a listing of OML state, RF policy as well as RSL
connection status for each TRX in the form:
<bts_nr>,<trx_nr>,<opstate>,<adminstate>,<rf_policy>,<rsl_status>;<bts_nr>,<trx_nr>,...
For example, the root node 'rf_states' may return:
0,0,operational,unlocked,on,rsl-up;1,0,operational,unlocked,on,rsl-down;2,0,inoperational,locked,on,rsl-down;
A 'bts.N.rf_states' returns the same form of string, but lists only the
TRX for the given BTS nr.
Note, there is already a CTRL command 'bts.N.rf_state' (singular
'rf_state', not plural 'rf_states'), which only reflects the overall
status of all TRX combined. This new command has per-TRX resolution.
The rf-policy is so far always looked up in the global gsm_network flag,
as does the old 'rf_state' command; see osmo_bsc_rf_get_policy_by_bts()
which does not depend on the specific BTS at all. This may be worth
revisiting in the future, so I am already including the rf-policy in the
rf_state string for each TRX, even though it is globally identical.
Related: SYS#5542
Related: I01e6f391a5e71b0606c42be9b57f8a1687d59bcb (osmo-ttcn3-hacks)
Change-Id: I14fa2678fc8f2c11a879c5e9615ac552782c5b7e
While NACC was initially developed, it became clear there was need for
a way to interact PCU<->BSC in order resolve ARFCN+BSIC into CGI-PS
for later RIM usage.
Hence, this resolution was first (until today) implemented using an out
of bands RPC system using the CTRL interface, which required specific
config to be written and matches in osmo-pcu and osmo-bsc VTY (ip+port
of the CTRL interface to use).
However, this has several shortcomings:
* As explained above, specific configuration is required
* Since recently, we do support BSC redundancy in osmo-bts. Hence the BTS
may switch to a BSC other than first one. If that happened, that'd mean
the CTRL interface would still point to the initially configured one,
which may not be the same currently serving the PCU.
During recent development of ANR related features, a similar need for
PCU<->BSC was required, but this time it was decided to extend the IPA
multiplex of the Abis OML connection to pass PCUIF messages,
transparently forwarded to each side by the BTS.
This has the advantage that connection PCU<->BTS is handled by BTS and
both sides send messages transparently.
Let's switch by default to using this new interface, while still
maintaing the old way for a while (announcing them as deprecated) to
avoid breaking existing deployments until they are upgraded to new
versions of osmo-pcu and osmo-bsc.
Change-Id: I9073a121564503f483c84263ac72476041e47c03
Related: SYS#4971
This commit extends existing VTY and RSL infrastructure to configure and
manage MS Power Parameters used in MS Power Control loop, by adding
support to set up Carrier-to-Interference (CI) parameters.
Using C/I instead of existing RxQual is preferred due to extended
granularity of C/I (bigger range than RxQual's 0-7).
Furthermore, existing literature (such as "GSM/EDGE: Evolution and Performance"
Table 10.3) provides detailed information about expected target values,
even different values for different channel types. Hence, it was decided
to support setting different MS Power Parameters for different channel
types.
These MS Power Parameters are Osmocom specific, ie. supported only by
newish versions of osmo-bts. Older versions of osmo-bts should ignore
the new IEs added just fine. The new IEs containing the MS POwer
Parameters are not send for non osmo-bts BTSs, hence this commit is
secure with regards to running osmo-bsc against an ip.access BTS such
as nanoBTS.
Related: SYS#4917
Depends: libosmocore.git Change-Id Iffef0611430ad6c90606149c398d80158633bbca
Change-Id: I7e76ec47b323d469f777624b74b08752d1f5584f
So far we have stat items per BTS. Add stat items summing overall BTS
status.
Add stat items:
- num_bts:oml_connected
- num_bts:all_trx_rsl_connected
- num_bts:total
- num_trx:rsl_connected
- num_trx:total
Related: SYS#5542
Related: Ic1b35b7406547f92818afe399a2383d154576409 (osmo-ttcn3-hacks)
Change-Id: I2057a798e681a169cc03243a09b3d6449734c010
Since the libosmo-mgcp-client now supports MGW pooling, lets use this
feature in osmo-bsc. Large RAN installations may benefit from
distributing the RTP voice stream load on multiple media gateways.
Depends: osmo-mgw Icaaba0e470e916eefddfee750b83f5f65291a6b0
Change-Id: I8f33ab2cea04b545c403a6fe479aa963a0fc0d0d
Related: SYS#5091
To configure temporary overpower, new VTY commands are added. This patch
also addes the logic needed to attach the temporary overpower IE to the
RSL CHANNEL ACTIVATE message.
Change-Id: I488a91bb4ed86f630db56564a0cd293f39f0f690
Related: SYS#5319
We already have MSC connection stat items, but for hysterical raisins
there are separate such stats for each MSC. Hence we have N connection
counters, each being either 0 or 1, for a single MSC.
Add a new stat counting the *overall* MSCs that are connected,
and one indicating the total number of configured MSCs.
Related: SYS#5542
Related: I178dcf4516606aa561d47b06061b8a416d3c40cf (osmo-ttcn3-hacks)
Change-Id: If76bbf9b3adb64c68d5c31c6b526fa71a99996ae
Instead of having static const structs in header files (which end up
duplicated in each and every compile unit!), have one .c file with the
rate_ctr and stat_item descriptions.
Related: SYS#5542
Change-Id: I8fd6380b5ae8ed2d3347e7cfbf674c30b6841ed9
Allow resetting the BSSMAP link from VTY, for BSC_Tests.ttcn.
In the field, detecting that an MSC is lost is done by getting three
connection failures in a row. For the BSC_Tests, it is easier to just
provide a VTY command to reset an MSC's link status.
I want to add tests that verify the stat items reflecting the MSC
connection status. To be able to run a test expecting fewer connected
MSC after a test that launched more MSCs requires the links to be reset.
Related: SYS#5542
Related: Ice3056dc46c94f9399f8379db7aeb7193782f2f2 (osmo-ttcn3-hacks)
Change-Id: I1975941b790d2b30d0904d41e456220cba26ecff
Add experimental 'pre-ts-ack' to the 'immediate-assignment' options:
send the IMM ASS even before a dynamic timeslot is switched. This
possibly saves an Abis roundtrip, but may be racy.
When pre-ts-ack is chosen, already do the IMM ASS before the dyn TS
pchan switch is ACKed.
In Immediate Assignment, in case the dyn TS is not ready yet, get the
pchan kind from lchan->type, which already reflects the target type, and
not from ts->pchan_is, which still reflects the previous pchan type.
Related test is in I2ae28cd92910d4bc341a88571599347a64a18fe5
Related: SYS#5559
Change-Id: I19e6a3d614aa5ae24d64eed96caf53e6f0e8bb74
When 'immediate-assignment pre-chan-ack' is set, send the Immediate
Assignment directly after the Channel Activation, not waiting for the
Activation ACK, to save an Abis roundtrip.
Related test is in If71f4562d532b6c5faf55f5fd073449a8a137ebf
Related: SYS#5559
Change-Id: I56c25cde152040fb66bdba44399bd37671ae3df2
This patch adds only the VTY config option without any effect, to ease
patch review.
The implementation follows in I56c25cde152040fb66bdba44399bd37671ae3df2
The new config option is written so that further variants of Immediate
Assignment sequencing may be added easily.
See also I19e6a3d614aa5ae24d64eed96caf53e6f0e8bb74.
Related: SYS#5559
Change-Id: I710343d1728153faf3db9758ff5a1ef26bb8d3d4
The function gsm48_lchan2chan_desc_as_configured() dups
gsm48_lchan2chan_desc() with merely a different pchan type
(ts->pchan_from_config instead of ts->pchan_is).
In an upcoming patch, I would like to do the same, just with yet another
pchan value (derived from lchan->type, because that reflects the channel
type even before a dynamic timeslot switched its pchan type).
So replace gsm48_lchan2chan_desc_as_configured() by
gsm48_lchan_and_pchan2chan_desc() with explicit pchan arg;
also call this from gsm48_lchan2chan_desc(), reducing code dup.
gsm48_lchan2chan_desc_as_configured() had more concise error logging.
Absorb that into the new gsm48_lchan_and_pchan2chan_desc().
Add gsm_lchan_and_pchan2chan_nr(), like gsm_lchan2chan_nr() just with
explicit pchan arg, to be able to pass the pchan down from the new
functions mentioned above.
Related: SYS#5559
Change-Id: I67f178c8160cdda1f2ab5513ac4f65c027d4012f
Usual allocation mechansim, when some signalling channel is needed,
first tries to reserve an SDCCH, and if all of them are exhausted, then
attempts to reserve a TCH as a last resort.
This, however, may cause TCH starvation under certain situations, for
instance if there high load on other services (LU, SMS, etc.).
Hence, it may be desirable for the operator to forbid reservation
of TCH slots once SDCCH become exhausted. This commit is thus adding a
VTY command which allows forbidding it. The default behavior (allow using
TCH timeslots when SDCCHs are exhausted) is kept as before.
The above mentioned prohibition is applied only to non-voicecall related
signalling services. That's because voicecall services will end up
requiring a TCH anyway, and forbidding reservation of TCH straighaway
when SDCCHs are exhausted would mean no voice calls could be initiated
while still TCHs would be available.
Related: SYS#5548
Change-Id: Ib08027125145df26602069bfb51847063b0ccc0c
Adds gsm_bts_stats_reset() to clear the stats and calls it from the
different models.
Change-Id: Ic42687cd73e3546edaa99fb1268a5960ffa43b12
Related: SYS#5541
It's an easy helper, but it helps in standarizing and finding similar
places in code.
Morevoer, it will be used in follow-up commit where we first use
lchan_avail_by_type and finally we select it in a later stage.
Change-Id: I025a40962a5e5d40543b297a0760e47618fb525c
The VTY handover_vtc.c offers a large number of handover specific
settings. Those settings are (with one exception) auto generated using
macros. Lets add an equivalent for the control interface that uses the
same auto generation mechanisms.
Change-Id: I12f143906818fd6b16e8783157cbb1eb51e49ffc
Depends: libosmocore I53fc207677f52b1dc748b01d58424839cdba807c
Related: SYS#5369
The VTY defun already indicates BSC_VTY_ATTR_RESTART_ABIS_OML_LINK
correctly, but so far we would immediately start using the new values
internally, and wrongly interpret interference levels. Fix that.
Have bts->interf_meas_params twice: interf_meas_params_cfg for the VTY
configured values, and interf_meas_params_used for the values that the
BTS actually knows about, after they were sent via OML.
In a running BSC, when changing the interference level boundaries on the
telnet VTY, the BTS is not immediately told about the change. That would
require a BTS restart. Hence store the cfg values separately in
interf_meas_params_cfg. For comparing/printing interference levels in a
running BTS, only employ the values that were actually sent via OML and
placed in interf_meas_params_used.
Related: SYS#5313
Change-Id: Iad8cf4151ff7f86dc0549158ed5d91d788d40b1f
Hold off re-assignment after an intra-cell re-assignment due to low
rxqual.
Adjust test_amr_tch_h_to_f_rxqual.ho_vty to show the changed behaviour.
Related: SYS#5198
Change-Id: Id00a07313fe04eec509b336c0637b59c707760e0
In an upcoming patch, handover_decision_2.c will use this indicator to
decide whether to start a penalty timer:
"hodec2: add low-rxqual-assignment penalty timer (2/2)"
Id00a07313fe04eec509b336c0637b59c707760e0
Related: SYS#5198
Change-Id: I5de385e0666f716184a62e6e70d656545ac5d2ee
Store the config option whether the channel allocator should try to
avoid lchans with higher interference levels reported in RES IND.
The actual implementation of avoiding interference follows in
I844494092193811dfd9fa4d52983cbaed0fc9248
Related: SYS#5313
Change-Id: I8b62d0b41ad9e908b27713db9219e3dbc1ebaab7
Add TDMA_MEAS_SET_AUTO to indicate automatic choice between FULL and
SUBSET measurements depending on DTX. So far use only in hodec2.
TDMA_MEAS_SET_AUTO looks at each individual measurement report's DTX
flag and for each report chooses FULL if DTX is not used, or SUB if DTX
is used.
The default setting for 'handover2 tdma-measurement' is still 'subset'.
To use the automatic choice, users need configure
handover2 tdma-measurement auto
Change-Id: I67dce55ccf892c8679272ee5dfedc25620f0f725
Cosmetic preparation for enabling automatic choice between FULL and
SUBSET measurements depending on DTX in handover decision 2.
Change the internal API to pass separate enums for the choices {RXLEV,
RXQUAL}, {UL, DL} and {FULL, SUB}.
Change-Id: I283e03126a6bc1f5f1b35f9801e841053edd2947
They will gain support to be activated as SDCCH/8 soon too.
Related: OS#5309
Depends: libosmocore.git I56dcfe4d17899630b17f80145c3ced72f1e91e68
Change-Id: Id5b89fe589a52ff88486435ac43809edb4b80f98
BS Power Control is not allowed on the BCCH/CCCH carrier, unless
the BTS is operating in the BCCH carrier power reduction mode.
Allow constrained BS power reduction (up to 6 dB) on active logical
channels iff BCCH carrier power reduction mode is enabled.
Take into account that the maximum power difference between a timeslot
used for BCCH/CCCH and the timeslot preceding it shall not exceed 3 dB.
Change-Id: I2cc6a86731984f586ef35b43a8d3de631f7d8a2f
Related: SYS#4919, SYS#4918
The BCCH carrier (sometimes called C0) of a BTS shall maintain
discontinuous Downlink transmission at full power in order to
stay 'visible' to the mobile stations. Because of that, early
versions of 3GPP TS 45.008 prohibited BS power reduction on C0.
However, starting from version 13.0.0 (2015-11) there is a feature
called 'BCCH carrier power reduction operation'. This is a special
mode of operation, where the variation of RF level for some
timeslots is relaxed for the purpose of energy saving.
In BCCH carrier power reduction operation, for timeslots on the
C0 carrier, except timeslots carrying BCCH/CCCH, the output power
may be lower than the output power used for timeslots carrying
BCCH/CCCH. In this case the maximum allowed difference in output
power actually transmitted by the BTS is 6 dB.
Introduce a VTY command to turn on and off the BCCH carrier power
reduction operation. Also introduce a CTRL command. On the
A-bis/RSL, abuse the BS POWER CONTROL message by setting
the Channel Number IE to 0x80 (RSL_CHAN_BCCH).
Currently, only osmo-bts-trx is supported. A value greater than
zero makes it reduce the power on *inactive* timeslots of the
BCCH carrier. Sending zero disables the BCCH power reduction
mode completely.
For more details, see 3GPP TS 45.008, section 7.1, and 3GPP TR 45.926.
Change-Id: I047fce33d4d3e4c569dd006ba17858467a2f4783
Related: SYS#4919
inter-BSC into this BSC: from BSSMAP Handover Request, parse and store
Kc128. All else is already implemented: depending on the chosen
encryption algorithm, Kc128 will end up in the Channel Activation.
inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP
Handover Required message does not contain any encryption related
information. The MSC already knows the chosen algorithm.
Related: SYS#5324
Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
Receive and store the Kc128 key from MSC, and use as key sent to BTS if
A5/4 is the chosen encryption algorithm.
(A5/4 in handover will follow in a separate patch)
Related: SYS#5324
Change-Id: I7c458c8a7350f34ff79531b3c891e1b367614469
Add VTY command to trigger an intra-cell re-assignment, also allowing to
re-assign to a secondary VAMOS lchan.
Related: SYS#5315 OS#4940
Change-Id: If006f5caaf83b07675f57e5665cfa79328da55e6
Add the Osmocom-specific extension to indicate VAMOS shadow lchans in
RSL, in lchan lookup and RSL message transmission.
Note that RR messages containing cbits (Assignment Command, Handover
Command, ...) must *not* send Osmocom specific cbits to the MS. Only the
RSL messages directed to the BTS send Osmocom specific bits.
Related: SYS#5315 OS#4940
Depends: If33c1695922d110c0d2c60d5c0136caf2587194e (libosmocore)
Change-Id: I957eff0d2c33ec795eda75a4bff21965b0179f73
It's bad to abort the program for an incompatible chan_nr. Instead of
OSMO_ASSERT(), make sure that error handling happens all they way to the
original callers of gsm_lchan2chan_nr etc.
This is also preparation to add further error causes: Osmocom specific
cbits needed for a non-Osmo BTS.
Related: SYS#5315 OS#4940
Change-Id: I71ed6437c403a3f9336e17a94b4948fca295d853
Change gsm_lchan_name_compute() to a function that in-place updates the
lchan->name. That allows calling it numerous times with the talloc
handled internally. Rename it to lchan_update_name().
Add 'shadow' to lchan_update_name() and lchan_fsm_update_id() for VAMOS
shadow lchans, and also print the lchan index that it is a shadow for,
instead of the index in the lchan array.
When set_pchan_is() updates the VAMOSness of the lchans, call
lchan_fsm_update_id(). From lchan_fsm_update_id() also call
lchan_update_name().
This is a bit convoluted for legacy reasons. There are utility programs
and C tests using bts_trx.c but not lchan_fsm.c. lchan_update_name()
lives in gsm_data.c for that reason. This patch calls
lchan_update_name() from lchan_fsm_update_id() and not vice versa to
avoid having to add stubbed lchan_fsm_update_id() functions to all
utility programs and C tests.
We can't easily unify the lchan->name and lchan->fi->id without lots of
refactoring rippling through all those little utility programs and C
tests.
Change-Id: I7c2bae3b895a91f1b99b4147ecc0e3009cb7439a
So far there is a bunch of code setting a primary lchan in VAMOS mode.
This patch now adds the actual secondary "shadow" lchans that may be
combined with a primary lchan in VAMOS mode to form a multiplex.
VAMOS lchans are put in the same ts->lchan[] array that keeps the
primary lchans. They are at most two additional usable lchans (for a
TCH/H shadow) added to either TCH/F or TCH/H.
Keeping these in the same array allows looping over all lchans easily.
The ts->max_primary_lchans indicates the index of the first VAMOS shadow
lchan.
Related: SYS#5315 OS#4940
Change-Id: I928af99498bba488d317693f3144d4fccbbe9af3
lchan->activate.info.ch_mode_rate should remain unchanged, it is the
immutable request data. However, for VAMOS, we will want to
automatically see that the chan_mode is chosen correctly.
As a first step, place a mutable ch_mode_rate copy at
lchan->activate.ch_mode_rate, i.e. not in .activate.info, but in
.activate. Use that everywhere.
This is mostly a non-functional change, preparing for a subsequent patch
that adds handling of VAMOS shadow lchans.
As side effect of adding lchan_activate_set_ch_mode_rate_and_mr_config()
after MODE_MODIF_ACK (enabling the voice stream after a channel mode
modify), fix AMR config: the call to lchan_mr_config() was missing.
Change-Id: Icc9cc7481b3984fdca34eef49ea91ad3388c06fe
VAMOS shadow lchans do not exist yet, but add the indicator flag that
tells whether an lchan pointer is a primary or a shadow lchan.
In Mode Modify: based on the flag, choose a different default TSC Set
for shadow lchans; do BTS type compat checking for shadow lchan use.
Actual lchans with vamos.is_secondary == true will be introduced by
patch: 'add VAMOS secondary lchans to timeslot struct'
I928af99498bba488d317693f3144d4fccbbe9af3
Change-Id: I4072fc7703c592df699fe8e27c02df09acde0909
Put a (primary) lchan in VAMOS speech mode.
This is not yet about activating shadow lchans, this merely puts any
lchan in a VAMOS capable channel- and speech mode.
Protocol:
In RR Channel Mode Modify, send a spec conforming VAMOS channel mode as
well as an Extended TSC Set, wich adds the TSC Set to the training
sequence code value.
In RSL MODE MODIFY, send Osmocom specific extensions to indicate the TSC
Set and TSC, as well as the VAMOS channel mode; only to OsmoBTS type
cells.
- Set the Channel Mode's Channel Rate to Osmocom specific
RSL_CMOD_CRT_OSMO_TCH_VAMOS_Bm / RSL_CMOD_CRT_OSMO_TCH_VAMOS_Lm
- Add the Osmocom specific Training Sequence IE containing both TSC Set
and TSC.
(These are documented in the Abis manual.)
Implementation:
The internal API to request a Mode Modify is lchan_modify(info). Add to
this info the 'vamos' bool, set to true when the modification should put
the lchan in VAMOS channel mode or not.
When info.vamos == true, make sure the channel mode value is a VAMOS
one: in the copy of info->ch_mode_rate at lchan->modify.ch_mode_rate,
convert to the right VAMOS/non-VAMOS equivalent channel mode.
When the modification is through, set lchan->vamos.enabled
appropriately.
This patch also builds on Ic665125255d7354f5499d10dda1dd866ab243d24
'allow explixit TSC Set and TSC on chan activ / modif / assignment'
placing tsc_set and tsc values in the TSC related IEs.
Related: SYS#5315 OS#4940
Change-Id: Ibf53f4797d7491b17a33946fd7d920f038362b4c
The RSL BS Power IE in measurement reports is encoded as dB / 2.
Instead of using this coding all over the code, converting to dB and
often printing confusing values in logging etc, store as plain dB.
The conversions should be at the points where a "weird" format is
defined: the RSL encoding needs divided-by-two, so apply it there. The
meas_vis is (now unfortunately) defined as div-two, and so on. But
internally we now just store the plain dB value and calculate with it
without duplicating the wire decoding step everywhere.
Rename to bs_power_db to clarify the unit of the stored value.
Change-Id: I229db1d6bcf532af95aff56b2ad18b5ed9d81616
According to 3GPP TS 45.008, the BSS shall monitor the levels of
interference on its IDLE traffic channels. The actual measurements
are performed in the BTS and then reported to the BSC over the
A-bis/RSL link(s) in RF RESource INDication messages.
3GPP TS 45.008 defines the following measurement parameters:
* Intave: Interference Averaging period (see table A.1),
* Interference level Boundaries (see table A.1).
Both parameters are sent to the BTS over the A-bis/OML, and can
now be configured via the VTY interface. Only those BTS models
which 'speak' the OML protocol defined in 3GPP TS 52.021 will
actually get the configured parameters, others will keep using
the hard-coded parameters.
Change-Id: I99ebf57aac1f3ca7e0497c3b4f6b0738c6ed7e47
Related: SYS#5313, OS#1866
This code is available in libosmocore since ~3 years ago
(fdf8b7b1beeb0cda262c5fb060a933aa7edb5e9a). Let's use it instead of
maintaining duplicated code which diverges over time.
Depends: osmo-bsc.git Iae058c35506bc25c9f4790889b89ac46aea664b6
(contains cherry-pick of bug fixed in osmo-bsc.git).
Change-Id: I53ad3067623077b6a8737c2a0aecc8b46bf71a15
lchan->modify.info.ch_mode_rate should remain unchanged, it is the
immutable request data. However, for VAMOS, we will want to
automatically see that the chan_mode is chosen correctly.
As a first step, place a mutable ch_mode_rate copy at
lchan->modify.ch_mode_rate, i.e. not in .modify.info, but in
.modify. Use that everywhere.
This is a non-functional change, preparing for a subsequent patch that
adds handling of VAMOS shadow lchans.
Change-Id: I8a3daac0287f15a59d3688388bb13e55facb2cea
So far we have a couple of macros iterating a specific number of lchans,
depending on dynamic timeslot state etc. With addition of VAMOS lchans,
this would become more complex and bloated.
Instead of separate iteration macros for each situation, only have one
that takes a number of lchans as argument. That allows to more clearly
pick the number of lchans, especially for non-trivial VAMOS scenarios.
Related: SYS#5315 OS#4940
Change-Id: Ib2c6baf73a81ba371143ba5adc912aef6f79238d
So far the number of usable lchans is determined on-the-fly by the
physical channel config. With VAMOS, this becomes more complex, namely
determining whether the BTS is vamos capable.
Instead of calling a function to determine the number of lchans for
every use, rather place the number of valid lchans in int members of the
timeslot struct, and initialize those during timeslot setup.
Actual use of these new fields will follow in a subsequent patch, which
introduces the ts_for_n_lchans() macro to replace current lchan
iteration macros.
Related: SYS#5315 OS#4940
Change-Id: I08027d79db71a23e874b729c4e6173b0f269ee4f
Activating / modifying to a VAMOS mode will require picking specific TSC
Set / TSC. It is a bad idea to pick the TSC in each message encoding
function, rather make this choice centrally.
So far we pick the training sequence code to use based on the timeslot
configuration, and this TSC is determined only upon encoding the RSL
messages.
Instead, pick the TSC to use upon the initial lchan activation /
modification request; store this in the request structs and pass through
the activation / modification code paths.
For VAMOS modes, we also need to pick a TSC Set. Do so also upon activ /
modif request. Note that the TSC Set is not yet applied in this patch,
it will be applied in upcoming VAMOS patches.
The activ / modif request may pass -1 for tsc_set and/or tsc to indicate
no specific choice of TSC Set and TSC, resulting in the same behavior as
before this patch.
For example, lchan->activate.info.tsc* may be passed as -1. The exact
choice for tsc_set and tsc is then stored in lchan->activate.tsc*, i.e.
one level up (the .info sub-struct is considered as immutable input
args). The lchan->activate.tsc* are the values actually encoded in RSL
messages. After the ACK, the lchan->activate.tsc* is stored in
lchan->tsc* to indicate the TSC actually in use. Same for modif.
Note that in 3GPP TS 45.002, the TSC Set are numbered 1 to 4, while the
TSC are numbered 0 to 7. On the wire, though, TSC Set is sent as 0 to 3
value. This is a weird discrepancy, odd choice made by the spec authors.
For conformance with the spec wording, I decided to pass the TSC Set
number as a 1-4 ranged value, and only convert it to the 0-3 on-the-wire
format upon message encoding. So log messages and VTY output will
indicate the first TSC Set as "1", but the first TSC as "0", as defined
in 3GPP TS 45.002, even if that is somewhat weird.
Related: SYS#5315 OS#4940
Change-Id: Ic665125255d7354f5499d10dda1dd866ab243d24
Expose the training sequence code used in the RSL Channel Description IE
as an input parameter.
So far the Channel Description IE is always composed with a training
sequence code from gsm_ts_tsc(). For RSL commands enabling VAMOS mode,
specific training sequence codes are required.
So far, all callers still use gsm_ts_tsc(), making this a patch without
any functional change. Upcoming patches will pass specific TSC as
configured for VAMOS instead, in specific places.
Related: SYS#5315 OS#4940
Change-Id: I49503a6f5d25bb3bc9a0505bd79ed1d5c4f50577
Move the conversion from chan_mode to lchan type out of the
lchan_select_by_chan_mode() function, so that the conversion can be used
by other code paths, coming up in VAMOS patches.
Related: SYS#5315 OS#4940
Change-Id: I296651ebadba81f8b3db0d9bb5b5377877a43677
Prepare for VAMOS, where there will be secondary "shadow" lchans serving
secondary MS on the same timeslots. For those, RSL messages will need to
reflect a different stream ID aka TEI, via an rsl_link_vamos.
Make sure that every code path that sends an RSL message for a specific
lchan selects the RSL link via the new function rsl_chan_link(). When
VAMOS is implemented, this function can select the proper RSL stream.
Rename gsm_bts_trx.rsl_link to rsl_link_primary. This makes sure I'm not
missing any uses of the RSL link, and clarifies the code.
Related: SYS#5315 OS#4940
Change-Id: Ifbf16bb296e91f151d19e15e39f5c953ad77ff17
So far we do all channel reassignments by Handover Command. Since
osmo-bsc now supports rassignment of ongoing voice calls, do intra-cell
congestion resolution by Assignment Command.
In effect, add support for expecting an Assignment Command in
handover_test, and expect assignments instead of handovers for
intra-cell congestion resolution test cases.
Related: SYS#5330 OS#3277
Change-Id: Id56a890106b93fcee67ac9401b890e7b63bba421
So far the assignment FSM always tried to satisfy the channel mode and
rate by either re-using the current lchan or finding a new, unused
lchan. For VAMOS however, we want to pick one specific lchan.
Add target_lchan to struct assignment_request and skip all mode matching
and lchan selection when a specific target_lchan is set.
Related: SYS#5315 OS#4940
Change-Id: I71e0d4ff4746706e0be5266e4574d70ca432e3d7
Firstly, do not store the encoded AMR length-value bits in gsm_lchan->*
before an activation/modify has actually succeeded.
And secondly, do not store the AMR LV structure in struct gsm_lchan at
all, but only generate the TLV exactly when a message is being composed.
In gsm48_multirate_config(), generate the LV directly to a msgb instead
of a static buffer first. gsm0408_test.c expected output verifies that
the generated LV bytes remain unchanged.
In lchan_mr_config(), introduce a target mr_conf argument, so that Chan
Act and Mode Modify may generate the filtered AMR config to different
locations (lchan->{activate,modify}.mr_conf_filtered).
Only after receiving an ACK for Activate/Modify, set
lchan->current_mr_conf from lchan->{activate,modify}.mr_conf_filtered.
Use the properly scoped lchan->activate.mr_conf_filtered for Chan Act,
lchan->modify.mr_conf_filtered for Mode Modify and
new_lchan->current_mr_conf for Handover Command as appropriate.
Related: SYS#5315 OS#4940 OS#3787 OS#3833
Change-Id: Ie57f9d0e3912632903d9740291225bfd1634ed47
The GSM48_CMODE_DATA_* rates are completely unused in OsmoBSC anyway,
but there is some code in abis_rsl.c checking its value, and if we were
to start using it that is the place where it should be.
Related: SYS#5315 OS#4940 OS#3787 OS#3833
Change-Id: Ie0e065a5dca5f4a31d5d81e3528a539214a74170
I noticed during testing that an lchan used as TCH/F in fact still had
its channel mode set to Signalling -- because on Assignment, the Speech
mode used to be placed in the *previous* lchan and the new lchan was
never updated after the Activ ACK. This is unbearable confusion which I
complained about numerous times, so far mostly for cosmetic reasons. But
implementing re-assignment properly actually requires this to be cleaned
up.
Keep all volatile chan mode settings in lchan->activate.* or
lchan->modify.*, and only update lchan->* members when an ACK has been
received for those settings. So a failed request keeps a sane state.
Make sure that those settings are in fact updated in the proper lchan,
upon an ACK, so that subsequent re-assignment or mode-modify know the
accurate lchan state.
Related are upcoming patches that sort out the AMR multirate
configuration in a similar fashion, see
Iebac2dc26412d877e5364f90d6f2ed7a7952351e
Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9
Ie57f9d0e3912632903d9740291225bfd1634ed47.
Related: SYS#5315 OS#4940 OS#3787 OS#3833
Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
So far, only the MSC asked for Assignment via Assignment Request, which
we answer with a BSSMAP Assignment Complete or Assignment Failure when
done.
When Assignment is triggered for any other reason (congestion
resolution, VAMOS, VTY), we will not send any such messages to the MSC.
Additional enum values will be added in subsequent commits:
Id56a890106b93fcee67ac9401b890e7b63bba421 ASSIGN_FOR_CONGESTION_RESOLUTION
If006f5caaf83b07675f57e5665cfa79328da55e6 ASSIGN_FOR_VTY
Related: SYS#5315 OS#4940
Change-Id: Ie0cddbdb00abcec78e153f4ae6d04ce75080a111
The Channel Mode Modify procedure is currently implemented for changing
a TCH lchan from signalling to voice mode. For that, however, it is
re-using (abusing) the channel activation structs and state transitions,
and thus always implies activating a voice stream when the mode
modification is done.
I will add a Channel Mode Modify to enable VAMOS mode soon, so I require
separate structs and state transitions which also work on an lchan that
already has a voice stream established: a struct lchan_modify_info and
LCHAN_EV_REQUEST_MODE_MODIFY, and dedicated assignment FSM state
ASSIGNMENT_ST_WAIT_LCHAN_MODIFIED.
For the part where a Channel Mode Modify enables a voice stream after
switching from signalling to speech mode, still use the channel
activation code path, but only once the mode modification is done.
General improvements:
- To ask for a mode modification, emit an FSM event that ensures a mode
modify only happens when the lchan state allows it.
- The new lchan_modify_info struct reflects only those parts that have
an effect during a mode modification (before the lchan_activate_info
was fully populated, many values not having an effect).
- More accurate logging, indicating "Mode Modify" instead of "Channel
Activation"
A TTCN3 test for the Channel Mode Modify procedure is added in
Idf4efaed986de0bbd2b663313e837352cc139f0f, and the test passes both
before and after this patch is applied.
Related: SYS#4895
Change-Id: I4986844f839b1c9672c61d916eb3d33d0042d747
In subsequent patches, I will add enum lchan_modify_for and enum
assignment_for, I prefer to have similar lchan_activate_for naming.
Change-Id: Ia4420fcd1234dbee92e768e5a32eab13fba29ea9
Soon, there will also be enums with ASSIGNMENT_FOR_* and MODIFY_FOR_*
naming. Add the ACTIVATE_ prefix to the existing enum to clarify.
Change-Id: I12190d4d154a1da6a9ebc9a755ccc2fe382ff188
Change lchan_set_last_error() to macro so that the error log reflects
where the error was encountered.
Change-Id: I571fdf2d418c52d120215cf19e57a3c96d67af07
Use a talloc ctx directly without an intermediate static buffer.
A subsequent patch will add a name tweak for VAMOS secondary lchans, so
it felt appropriate to first clean this.
Change-Id: Idb922605c15242a2cdc7c34668c845a179a15660
A crash was reported in bssmap_le_tx_reset() sending a RESET with
sccp_user == NULL. Looking at the issue I noticed that when the
sccp_user is torn down, the RESET FSM should also be terminated.
Add bssmap_reset_term_and_free() to the generic RESET FSM implementation
and call from lb_stop() before sccp_user is set to NULL.
Related: OS#5134
Change-Id: If412ef990fcdde8ff88098a5169e86f05cd1c7f0
Whenever SRVCC EUTRAN->GERAN is performed by the CN, it will set the
Last Used E-UTRAN PLMN Id in order for the BSS to inform the MS
about EUTRAN neighbors once the call is over.
The last part (sending EUTRAN neighs) is already implemented, since same
thing is done as per CSFB. However, we lacked the first part, where the
EUTRAN PLMN Id is recorded for later use.
Actually, in both cases, we end up building the list of neighbors
without taking into accound the PLMN value (hence no filtering of
configured neighs), but it only sends such a list if any PLMN was stored
there, which means this patch is still necessary for a quick fallback to
4G after the call is over.
Related: SYS#5337
Depends: libosmocore.git Change-Id I0e55e947b6fef6dad0cf1a6c16b781bef4cc76c5
Change-Id: Ia5008f11a4c36ef8085a2037d4abddd131086e6e
This patch caused major breakage in my setup, with BSC printing at
startup: "(bts=0,trx=0) Failed to generate System Information".
And bts-trx printing all the time:
"sysinfo.c:162 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES
value as SI3 is not available yet, fallback to 1"
This reverts commit c1a5310a3e.
Change-Id: I5da365c93aedc6668a77b82ee9b68cbec64967e3
The effects of the neighbor configuration depend on the LAC, Cell
Identity, ARFCN, BSIC configuration of neighbor cells. Make sure that
the neighbor ARFCN list in the System Information is updated.
This may seem rather aggressive: updating the SI of all BTS if only one
config item changed. But indeed even modifying one config item of one
BTS may cause a change in the neighbor relations that many other BTS may
have to the changed BTS. For example, if many BTS configure a
'neighbor lac-ci 42 23', and this cell's config changes to LAC 43, all
of those other BTS need to update their neighbor ARFCNs.
Also update the system information even before the BTS are connected and
started up. The main benefit here is that the VTY 'show bts N' command
then already lists the correct neighbor ARFCNs.
In gsm_bts_trx_set_system_infos(), make sure that the updated SI is only
sent to TRXes that are actually usable, otherwise abis_rsl_sendmsg()
spams the log with complaints that a message's dst == NULL. Still return
an error rc in case a TRX is not connected, so that the CTRL command
bts.N.send-new-system-informations accurately returns whether SI were
actually sent to all TRXes.
The desire to have the ARFCNs listed in the VTY before starting up BTSes
came during analysis for Ifb54d9a91e9bca032c721f12c873c6216733e7b1,
which fixes a bug that is now much easier to verify being fixed.
Change-Id: I2222e029fc225152e124ed1e8887f1ffd4a107ef
From 3GPP TS 48.008 sec 3.1.30 "Common ID":
"""
If the SCCP connection is established due to CSFB from E-UTRAN and the MSC supports
return to the last used PLMN after CS fallback, then it should send the COMMON ID message
to the BSS including the Last used E-UTRAN PLMN ID information element if available at
the MSC immediately following the successful SCCP connection setup.
"""
Furthermore, 3GPP TS 48.008 version 16.0.0 Release 16 "3.2.1.21 CLEAR COMMAND",
for field CSFB Indication, states:
"""
NOTE: This information element doesn't serve any useful purpose. MSCs should not send the
information element unless it is required by the recipients (due to the need to interwork
with older versions of the protocol). It is expected that in future versions of the present
document, this information element will be deleted from this message.
"""
Hence, build up the EUTRAN neighbor list based on whether we received
the Last E-UTRAN PLMN ID IE during Common Id. In the future, we should
probably filter the list while populating it based on the received IE.
This change will also allow reusing same mechanism for SRVCC
EUTRAN->GERAN support, where te Last E-UTRAN PLMN ID IE can be found
inside "Old BSS to New BSS information" IE in msg HANDOVER REQUEST.
Related: SYS#5337
Change-Id: I5d290ac55eca5adde1c33396422f4c10b83c03d5
sysmoBTS is a BTS model sold by Sysmocom, which runs osmo-bts.
The later may also work with some other back-ends, including
the genaral purpose SDR hardware. Therefore, it's more
logical to call it 'osmo-bts'.
Change-Id: I93ab4dbf483e0786c35685b75ee4ea83bd591f7b
Calculating the Cell Allocation (basically a bit-vector of all the
frequencies allocated to a cell) on the OML link establishment has
several downsides and potential problems:
* Theoretically, more than 64 ARFCNs can be allocated for a cell
via the VTY interface. The problem here is that the Mobile
Allocation IE cannot contain more than 64 channels.
* The BSC's operator will neither be warned by the interactive
VTY shell during configuration, nor during the startup.
* The BSC will accept such a configuration, but then will be
unable to encode the Mobile Allocation IEs at run-time.
This change aims to improve the situation by separating part of
the logic from generate_cell_chan_list(), and invoking this
part directly from the VTY commands. This way it will become
impossible to configure more than 64 ARFCNs, neither via the
config file, nor interactively from the VTY.
Change-Id: I98211fb0684a973239f5760e1de52a24a1f4c33c
It is observed that a CHANnel ReQuireD with access delay
greater than 63 can be received from the Ericsson RBS.
This results in osmo-bsc sending back a CHANnel ACTIVation with
a Timing Advance IE containing the access delay value.
The RBS NACKs this, leading to a BORKEN Channel.
This patch makes the maximum acceptable access delay vty-configurable
and Ignores CHANnel ReQuireD RSL Messages with Access Delay IE greater
than that configured. Default value is 63.
Related: OS#5096
Change-Id: Ie8987bcc0e43921bc753162b77a0efc68799b3ce
The neighbor configuration storage is fundamentally broken: it requires
all local cells to be configured before being able to list them as
neighbors of each other. Upon config write-back, the neighbor config
however is placed back inline with the other config, and hence a
written-out neighbor config no longer works on program restart.
The cause of this problem is that the config is stored as explicit
pointers between local cells (struct gsm_bts), which of course requires
the pointer to exist before being able to reference it.
Instead, store the actual configuration that the user entered as-is,
without pointers or references to objects that need to be ready. Resolve
the neighbors every time a neighbor is needed.
Hence the user may enter any config at any place in the config file,
even non-working config (like a BTS number that doesn't exist), and the
relation to actual local or remote neighbor cells is made at runtime.
Abort program startup if the initial neighbor configuration contains
errors.
Related: OS#5018
Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
So far the list of penalty timers was stored for an opaque target
pointer. That was either a gsm_bts pointer for a local BTS, or a cell
identifier list pointer for a remote-BSS cell.
Reasons to refactor penalty timers:
- The cell identifier list pointer came from the neighbor configuration
storage, but the way cell neighbor config is stored will change in a
subsequent patch. There will be no more cell identifier lists there.
- Storing object pointers is inherently unsafe -- if an object gets
removed and another gets allocated, the penalty timer could
theoretically remain in force for an unrelated object.
Rather store penalty timers for specific Cell IDs. Since remote-BSS
neighbors can be requested by a cell identifier *list*, use a
gsm0808_cell_id_list2 as key in the list of penalty timers.
Fix handover_test.c: have different CI for each local BTS. So far it was
the same LAC+CI for all BTSes, which now would make the test fail,
because any penalty timer would appear to apply to all local cells.
Related: OS#5018
Change-Id: I72dd6226a6d69c3f653a3174c6f55bf4eecc6885
Allow selection of RX diversity from VTY
Options are a,ab,b
Default is 'a' so there is no change from previous behavior
Change-Id: I430762b8cfa51060841d90ba4446de73bd557c6c
This commit adds support for Selection of syncronization source.
Options are internal for E1 and external for GPS
Change-Id: Ia3d1acd6b3442238b35fc911092e12a6ac989adb
The function is not really handover specific, and will be used in other
places in subsequent patches.
Change-Id: Icae8b9045e497f850f22cb3b6f93acbf61b84746
On lchan activation, we already know the Timing Advance in most
situations: from the Channel Request RACH, or from a previous lchan in
the same cell. Place this information in lchan->activate.info.ta.
So far, the lchan->last_ta (until recently called rqd_ta) was used to
store the initial TA for channel activation -- move the initial TA to
lchan->activate.info.ta, for proper scoping.
Only an inter-cell handover does not yet know a Timing Advance (until
the Handover Detection RACH is received), so indicate
activate.info.ta_known = false for that case.
If ta_known is false, do not include an Access Delay IE in the Channel
Activation message, ensuring that the BTS does not use an arbitrary TA
that is likely inaccurate.
The effect for OsmoBTS is that we will *not* start the downlink SACCH on
channel activation for inter-cell handover, but will wait for a HO RACH
first, and then use the correct TA when enabling downlink SACCH.
Related: OS#4008 SYS#5192
Change-Id: I986bf93e8acd6aef7eaf63ac962480b680aa894f
Originally, the lchan stored only the Timing Advance from the initial
channel request, hence it was called rqd_ta.
Since quite a while now, rqd_ta also stores the most recent Timing
Advance from each received Measurement Report. So rename to last_ta.
This is cosmetic preparation for an upcoming patch that clarifies
whether the Timing Advance is already known for Channel Activation.
Change-Id: I1049526a173819baeb4978db5bf018ba3f1006a0
This is required in order to tell MS that osmo-pcu now supports
Network Assisted Cell Change (NACC).
Other BTS are not enabled by default since NACC support is not known to
work nor tested there.
Depends: libosmocore.git Change-Id I61991266b95d0c13d51b47906cc07846e9cf1390
Related: SYS#4909
Change-Id: If91d85331d402c3ab9c32b70c2c66cd7ba6ceb28
Add bool log argument to lchan_avail_by_type() and omit logging when
passed as false. From handover_decision_2.c, pass 'log' as false, from
all other callers pass true, i.e. for unchanged behavior.
Rationale:
Usually, we use lchan_avail_by_type() to select a new lchan to initiate
actual service. For that, it is interesting to see how osmo-bsc decides
which lchan will be used.
For handover decision 2, we since recently call lchan_avail_by_type()
for each and every handover candidate, to determine whether it will
occupy a dynamic timeslot or not (to know whether we would congest the
other TCH kind). So this happens for each permutation of source lchan
and target cell. That produces a lot of logging, out of proportion of
being useful to the maintainer.
Change-Id: Ia403f8fc853ca9ea9e81f7a7395df6b23845ebed
This new CTRL interface allows users of this BSC (such as attached PCU)
to gather neighbor information.
This interface is needed for PCU to translate ARFCN+BSIC keys provided
by MS in the Um side into CGI + RAC keys used to identify target cells
in RIM procedures against SGSNs on the Gb interface.
This patch extends the already existing neighbor information storage in
the VTY by allowing storage of CGI + RAC (RAC couldn't be stored
beforehand).
Related: SYS#4909
Depends: libosmocore.git Change-Id If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ib07c9d23026332a207d4b7a0f7b4e76c0094e379
The existing code uses short-lived FSMs which are allocated straight
before START, and which are free'd after DONE state is reached.
While that works, it makes state introspection a bit hard, as one
cannot show the FSM states, etc.
Let's change to a different model where the per-OM2k-MO FSMs are
always around (in state INIT after object creation). While at it,
also introduce a RESET event that can reset each FSM instance back
to INIT state, i.e. in case of OML link failure.
Change-Id: Ia37cffff5c451e1d79a52ccae41ab5718b4661d4
This allows a given BTS model driver to initialize data structures
specific cor this BTS instance (or a TRX for this BTS instance).
Change-Id: Icbad9cdc12221c9ad997267d77e5414edcbac538
This change introduces two optional function pointers:
- power_ctrl_enc_rsl_params() - this function will be called by the
A-bis/RSL code in order to encode MS/BS Power control parameters
for CHANnel ACTIVation and MS/BS POWER CONTROL messages.
- power_ctrl_send_def_params() - this function will be called for
each transceiver on A-bis/RSL link establishment in order to
send default MS/BS Power control parameters.
Change-Id: Iba3ad5d8d549a6676050272f85b21c9b4c219d21
Related: SYS#4918
libosmocore > 1.4.0 is required (master, not yet released) since some
fixes done in osmo-bsc code where not cherry-picked to libosmocore APIs.
Depends: libosmocore.git I2bf5635b8536b11d69774d17ac1908019633e3af
Change-Id: I7d5e5ddd174463c2a3d957c8245d2911ce013681
Steve Langasek <steve.langasek@ubuntu.com> submitted some patches
against downstream osmo-bsc 1.3.0 because some possible null derefences
were detected by the compiler on Ubuntu s390x. Code has eveolved since
then and patch doesn't apply directly anymore, since related code
changed (we now use osmo_count in bsc_subscr_get).
The compiled allegedly claimed some null dereference in gsm_lchan_name.
In general code using that function seems to be doing checks for
existing lchan before calling it, or assuming the lchan pointer is not
null, so I couldn't find any major issue.
However, let's add a OSMO_ASSERT to make sure we can easily identify the
issue if an issue ever happens there, since the gsm_lchan_name should
clearly only be called on non null pointers.
Change-Id: If4d12cb1d95ee2a89244bb8f27df839871667387
This is needed in order to to proper feature support verification for
IPv6 when configuring the NSVC.
Before this patch, there could be a race condition where NSVC FSM
checked for BTS feature BTS_FEAT_IPV6_NSVC before it was negotiated
through BTS Get Attributes (Ack).
Fixes: OS#4870
Change-Id: I7c207eee0e331995ae04acec014fbd13d4d16280
Before this patch, Get Attributes was sent quicklyafter the OML link
became up, even if the BTS/BB_TRANSC objects were still powered off,
which is wrong since attributes should only be available after the
objects transition out of the Power off state.
Furthermore, information about get attr response already received will
be required in future patches to delay NSVC setting.
Related: OS#4870
Change-Id: I8ec39c7e1f956ffce9aecd58a5590c43200ba086
The only real 1-1 relationship between BTS NM objects is the one between
GPRS Cell and BTS (which is actually a BTS cell).
In our current osmo-bts implementation we don't care much since we only
handle 1-cell BTSses, but let's make the data structure organization
more generic.
Implementation notes:
The gsm_bts_sm is moved to its own file, APIs to allocate are added and
the new public object is hooked correctly in the allocation process of
osmo-bsc.
Change-Id: I06461b7784fa2a78de37383406e35beae85fbad8
In order to activate FACCH/SACCH repetition on the BTS, the classmark 3
IE in the CLASSMARK CHANGE message must be parsed and depending on the
Repeated ACCH Capability bit the RSL_IE_OSMO_REP_ACCH_CAP is added to
the RSL CHAN ACT und RSL CHAN MODE MODIFY. Since
RSL_IE_OSMO_REP_ACCH_CAP is a propritary IE, it may only be added for
BTS type osmo-bts.
Change-Id: I39ae439d05562b35b2e47774dc92f8789fea1a57
Related: OS#4796 SYS#5114
To be able to control the FACCH/SACCH repetition behavior inside the
BTS a one byte flag is sent to the BTS together with the
RSL_IE_OSMO_REP_ACCH_CAP IE. This patch adds the necessary VTY commands.
The sending of the flag is implemented in a follow-up patch.
See also: I39ae439d05562b35b2e47774dc92f8789fea1a57
Related: SYS#5114, OS#4796, OS#4794, OS#4795
Depends: libosmocore I6dda239e9cd7033297bed1deb5eb1d9f87b8433f
Change-Id: I083eaa2c30478912426e9c24a506f0b88836e190
A header file should only contain declarations, not entire definitions.
The fact that we have 'static const struct ...' definitions in a header
file means that very C file including this header file will get its own
private copy of the entire definition.
The header file should only include declarations, while the actual
non-static definitions should go to a *.c file. Let's fix this.
Also, take a chance to improve readability and apply more consistent
formatting (similar to 'struct hf_register_info[]' in Wireshark).
Change-Id: Ib5949879902acbe1edda577477d9d51a2cc425d1
Closes: OS#4816
This feature apparently assigned a fixed LAC and CI to a specific MSC, but
looking at the implementation was obviously not useful.
Keep the vty commands for legacy compat, now without effect besides logging an
error via vty_out().
Related: OS#4751
Change-Id: I6bee704e7e5d5b6b86473323bae1fa9fce9241ee
Older osmo-bts versions (before FSMs) tended to mimic broken behavior
from nanoBTS. As so, we detect it because SiteMGr becomes Enabled by
default as in nanoBTS, and hence we can manage them also by expecting no
Offline state and sending Opstart (and hence finally transitting to
Enabled) during Dependency state.
Change-Id: Iaa036a2936f609b9b9721b2b4ad8d6deaf023f42
Previous commits to generalize the a_reset FSM prepare for this commit: use the
same reset FSM for the Lb interface.
Change-Id: I8c03716648f8c69d12d8f0a0bcec14f040d7cff2
To not modify previous SCCP behavior of OsmoBSC, keep the Lb interface disabled
by default. The following configuration enables the Lb interface:
smlc
enable
Change-Id: I01314a29a2cad6f325d9f4687a9dedca6b90a3ce
So far we would cancel ongoing Paging for a given MSC only after receiving a
RESET message from that BSC. However, the typical operation would be that
OsmoBSC *sends* a RESET and receives a RESET-ACK.
Instead, move the call to within osmo_bsc_sigtran_reset(). This is also called
when OsmoBSC considers the A-interface link to be lost, from the a_reset.c
code, after multiple SCCP connection failures.
Change-Id: Ia14b916be56563d18632c69a833084e71799a468
Separate the a_reset FSM implementation from BSSMAP and MSC specifics, so that
it can be re-used on the Lb interface.
Move the FSM implementation to bssmap_reset.c and tweak, to match common practices we
have generally established in our osmo_fsm implementations.
Keep a_reset.h and a_reset.c and redirect to bssmap_reset.c.
A difficulty is setting a proper logging category: the FSM definition allows
only one fixed logging category for FSM state transitions and events. Ideally,
the BSSMAP reset fsm would log on DMSC, and the BSSMAP-LE reset fsm would log
on DLCS. Since that is not possible, introduce a separate DRESET logging
category. This in fact matches an item on my wishlist, because if a given MSC
is configured but currently not connected, the previous RESET FSM would
continuously "spam" log LOGL_NOTICE messages indicating that it is resending
RESET, and I often want to silence those messages without silencing the entire
DMSC category. This is now easily possible by setting DRESET logging to
LOGL_ERROR. There is additional "link up" / "link lost" logging on DMSC, so all
interesting info is still visible on DMSC.
Change-Id: Ib3c3a163186c40a93be0dea666230431172136df
When adding the Lb interface, it is necessary to determine an unused conn id
across *all* SCCP users. Prepare adding Lb by moving conn id creation out of
the gscon code and generalizing.
Change-Id: I12fcb18f6e4380f72929cfe7681bac05330a8c9a
Location Services brings a new scenario to OsmoBSC: the MSC may create an
A-interface conn for a subscriber without an lchan being established (N-CONNECT
from MSC to BSC, so far only for an incoming inter-BSC handover).
If an MS becomes active while an A-interface conn is already established,
associate with an existing conn.
Change-Id: I42290f519a419ed7e8dd02a5ed0a5261b30a51e6
The N-CONNECT.req on the A interface is a possible *consequence* of the event
being handled, namely the incoming RSL ESTablish INDication containing the
Complete Layer 3 message: dispatched by bsc_compl_l3().
If an (LCS related) connection is already present on the A-interface when the
lchan is established, there will be no N-CONNECT but an N-DATA sending the
Complete Layer 3. See BSC_Tests.TC_cm_service_during_lcs_loc_req().
Change-Id: Ic43aabeb0d3c58ac62249ad9d3718363d32508f9
During LCS development, I'm getting use count bugs and would like to see use
token strings to figure it out.
Change-Id: I29bf60059d4cf7bb99a00753e6cdc149baf95f94
To distinguish between the CN requiring a Complete Layer 3 response, or just
the BSC requiring a TA, allow recording a separate for-LCS paging reason.
Change-Id: Ib28d1599ae4e483727398859d07de4490fbc31f0
Allow starting a paging from elsewhere than a BSSMAP Paging Request. For
upcoming Location Services (LCS), a BSSLAP TA Request from the SMLC may require
triggering a Paging.
Change-Id: Iaff91584699d163bd1963927280ff3a8ddd43073
For LCS, I would like to add an enum indicating the paging reason. Instead of
modifying extremely many function signatures to pass the reason across all
levels of paging, introduce a struct combining these.
Change-Id: I27ca78fc6ff8ef1101554c0a8429e34945ca6f3c
Instead of iterating the llist of gsm_paging_requests first to find an MSC, and
then again right away to mark the paging as served, do both in the same step.
Change-Id: I447e61afc9934f3a5a82f6076e41c155d3328041
Move conn allocation to bsc_compl_l3(), from gsm0408_rcvmsg().
Drop dispatch of GSCON_EV_A_DISC_IND, because a) we did not receive such
DISC.IND, and b) the lchan release will discard the conn in the regular
fashion.
In upcoming LCS patch, bsc_compl_l3() will decide whether to allocate a new
conn or whether a conn from a Perform Location Request already exists for the
subscriber.
In this patch, it becomes clear that the conn->bsub is always NULL in
bsc_compl_l3(), and that the 'log_set_context(LOG_CTX_BSC_SUBSCR, conn->bsub);'
never has the intended effect. An upcoming patch will change that.
Change-Id: I92af0f0d54c4282d782f2b29d524a64006c3b674
Introduce a address_type in the NSVC configuration pass the given
protocol. The remote_ip is network byte order, the default
encoding for in_addr and in6_addr.
Related: Iae854875a45dbc29cd46a267ccaf60f1f2ac2973
Related: SYS#4915
Change-Id: I740be0a401612bb5ed4e8ccd7f4be8176b936449
The protocol 9 was extended (compatible) with
* app info request
* suspend request (ETWS)
* rach indition (add fields ts / trx)
Only copy the relevant parts but no implementation.
Related: OS#4766, OS#4767, OS#4768
Change-Id: Ia81310326b093a8e473b6c69045304667b3b60f1
During the A-bis/OML bootstrapping, osmo-bsc sends Opstart to the
Radio Carrier MO twice. The first Opstart is triggered by the
State Changed Event Report, originated by the Radio Carrier itself.
The second is triggered by Software Activated Report.
According to 3GPP TS 12.21, figure 2, we shall send it only once,
after the "Attribute setting" step. Therefore, the first Opstart
is premature, and we shall not send it.
Related: SYS#5063, OS#4755
Change-Id: If69393551117266ecb726d8961153560b2b3cc59
Backwards compatibly, introduce timer groups in OsmoBSC, and move some
non-specified T timers to new X timers:
T993111 -> X3111
T993210 -> X3210
T999 -> X4
Why X4? because there already is an X3 used elsewhere in Osmocom, and I find
it less confusing if X-numbers don't repeat across programs. See
https://osmocom.org/projects/cellular-infrastructure/wiki/List_of_Timer_numbers
Drop unused timers from g_mgw_tdefs. Only X2427 has an actual effect.
(libosmo-mgcp-client recently moved T2427001 to X2427.)
Put libosmo-mgcp-client related timers to the 'mgw' group, like in osmo-msc.
This makes the MGCP timeout configurable for the first time.
Keep previous timer commands as DEFUN_HIDDEN, and also translate the moved T
timers to X timers on-the-fly. All previous VTY commands still work, and new
'timer [(net|mgw)] ...' commands are added. timer.vty shows this.
Remove the "_OPTIONAL" from the legacy "timer" and "show timer" commands, so
that they don't ambiguously overload the new "timer [(net|mgw)] ..." commands.
Related: OS#4539
Related: If097f52701fd81f29bcca1d252f4fb4fca8a04f7 (osmo-mgw)
Change-Id: I4beec47502afa193dee343869c4be55dc6a4b536
It does not make sense to set the bsc_subscr's LAC from a Paging Request,
especially since the paging code has loops that possibly kick off several
pagings.
At this point, there remains no code setting bsub->lac anywhere. We could set
it during rx of Complete Layer 3, but since there is no use for it besides a
vty dump, let's just drop the bsub->lac completely, and the vty dump of it.
Change-Id: Id017bd494d329b6fc254d7135b4074ac2b224d66
RF-locking: simply ask bsc_grace_allow_new_connection() at the start of
page_subscriber(). Before this patch, we would log an INFO of "Paging request
failed" when RF-locked, for each BTS. Instead log "RF-locked". (An upcoming
patch will introduce a LOG_PAGING() macro that will trivially add more log
context there, so not bothering now.)
Drop LAC condition: since Stefan introduced page_subscriber() starting 2018
Ic3c62ff0fccea586794ea4b3c275a0685cc9326e, matching a requested LAC to a
specific BTS is done *before* calling page_subscriber().
BTW: the msc->core_lac (config 'core-location-area-code') has not had an effect
on Paging maybe ever. I opened OS#4751.
Change-Id: Ic8696414a1db8f4b1be502d6434599f684746ed6
when an emergency call arrives while all TCH are busy, the BSC should
pick an arbitrary (preferably the longest lasting) call / lchan and
release it in favor of the incoming emergancy call.
The release of the existing call is a process that can not be done
synchronously while the ChanRQD is handled sonce multiple messages are
exchanged between BTS and MSC and multiple FSMs need to do their work.
To be able to release one lchan while handling a ChanRQD a queue is
implemented in which the incomming channel requests are collected. If
an emergency call is established while all channels are busy, an
arbitrary lchan is picked and freed. When freeing the lchan is done,
the queue is checked again and the emergency call is put on the free
lchan (TCH/H or TCH/F).
Change-Id: If8651265928797dbda9f528b544931dcfa4a0b36
Related: OS#4549
osmo-nitb supports the modification of an lchan if the lchan is
compatible but in the wrong mode. This feature was dropped in the
transition to AoIP/bsc-split. However, osmo-bsc still has code to
generate and parse the messeages, but the FSMs do not support a mode
modify yetm
Lets add handling for mode-modify to the lchan_fsm and assignment_fsm in
order to support mode modify again
Change-Id: I2c5a283b1ee33745cc1fcfcc09a0f9382224e2eb
Related: OS#4549
During handover cleanup due to a Clear Command from the MSC, do not send
another Clear Request to the MSC. Only send that when no Clear Command was
received yet.
Add a flag rx_clear_command per gscon instance, indicating whether a Clear
Command was received, and exit early in gscon_bssmap_clear() when true.
This is part of patches fixing the rate counters around handover, which uncover
some bugs:
- Another patch enables proper handover result handling when receiving a Clear
Command.
- After that, the handover_end() handling would always cause sending a Clear
Request, even if a Clear Command was already received.
- This patch removes the extraneous Clear Request, for this scenario and for
all other corner cases that might still exist.
Related: OS#4736
Change-Id: Iab82cac0a7ffa7d36338c8ff7c0618a813025f13
So far, during inter-BSC outgoing handover, when receiving an RR Handover
Failure from the MS, it would be counted as 'error'. Instead, add the 'failed'
counter like for all other HO types.
It may make sense to omit the 'failed' counter for inter-BSC *incoming*
handover, because then we won't receive an RR Handover Failure message. I
probably got those two mixed up during initial development.
Related: OS#4736
Change-Id: I9a61d5cc7273a830ba4e66e43e4aac6cdb707471
Firstly, make CBSP server and client mutually exclusive: Do not allow osmo-bsc
to be configured as CBC client *and* CBC server at the same time.
cbsp_link.c expects at most one CBSP link to be established, and, upon sending
CBSP messages, probes whether to send the message to a CBSP server or client
link. When both listen-port and remote-ip are configured (regardless of an
actual CBSP connection), osmo-bsc gets confused about where to send CBSP
messages.
One solution would be more accurate probing for an actual established TCP
connection. But the simpler and less confusing solution is to force the user to
configure only server or only client mode, never both.
Introduce 'cbc' / 'mode (server|client|disabled)'.
Secondly, clarify the 'cbc' config structure into distinct 'server' and
'client' subnodes. Refactor the 'cbc' VTY node in such a way that the IP
addresses for server and client mode can remain configured when the CBSP link
is switched between server/client/disabled modes.
To implement the above, switch the struct bsc_cbc_link to use osmo_sockaddr_str
for address configuration.
Related: OS#4702
Related: I7eea0dd39de50ed80af79e0f10c836b8685d8644 (osmo-ttcn3-hacks)
Related: I9e9760121265b3661f1c179610e975cf7a0873f1 (docker-playground)
Change-Id: Icaa2775cc20a99227dabe38a775ff808b374cf98
As 3GPP TS 48.058 clearly states, an RLL RELease INDication is only
sent if the datalink is released by the MS. Thre's no cause value
giving further diagnostics, but if the MS releases the link, it is
clearly not the BSS's fault, and hence "BSS not equipped" is wrong.
Change-Id: I38222e60071841abcd06046a472ddb35907164a4
Related: OS#4728
In some (error-) cases we might be unable to determine which BTS to use
when counting handover events. We don't want to loose these events
because then ctr(bsc) == sum(ctr(bsc->bts)) would not be true anymore.
Those events are now counted by a counter in struct gsm_network which
uses an index that is out of range for regular BTS (65536).
Change-Id: Ic0f3edd5dc014c4eac5e8423133633a3e5d4c13e
Related: SYS#4877
Currently the counters don't distinguish between intra-cell and
intra-bsc handover.
Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track
intra-cell/bsc handover separately.
Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547
Related: SYS#4877
Our current handover counters only count success/failures per BSC. It
would be nice to also count which BTS is part of a (successful/failed)
handover.
This patch duplicates the BSC counters for the BTS and changes the
ho_count and related macros to also count per BTS. If a BTS is NULL
(when conn->lchan is NULL) counting for the BTS is ignored.
Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296
Related: SYS#4877
The MSC may at any time send a BSSMAP CommonID message via a
SCCP connection to inform us of the IMSI of the subscriber. Let's
make use of that information by associating a related bsc_subscr
and updating the identity of the bsc_subscr_conn_fsm for improved
logging / filtering.
Closes: OS#2969
Change-Id: I52c43fb940f0db796adf4c0adb2260321c721c39
When the BTS is is not an ipaccess BTS, the BTS can only be an E1 bts.
In that case E1 endpoints must be used and there will be no RTP stream
setup towards the BTS.
Change-Id: I4f1f39bf90b0a7c9ea448dab255daf99cd36bb4a
Related: OS#2547
Prior to this patch, ACC ramping was only used to go 0->N in the
number of allowed ACCs during BTS startup. It could optionally
dynamically stretch or extend the ramping time based on channel load.
With this patch, ACC ramping is kept alive during the entire time the
BTS is active, and subset of allowed ACCs can now be incresed or
decreased based on channel load. A new VTY command
"access-control-class-ramping-chan-load" is added to configure a lower
and an upper threshold. Channel load under the low threshold will
potentially trigger an increment of the subset size of allowed ACCs,
while a channel load over the upper threshold will potentially trigger
the opposite (a decrease in size).
The time between checks is kept fixed per VTY command (reusing old
"access-control-class-ramping-step-size"), but the "dynamic" option
is deprecated and ignored from now on since it provides nothing valuable
in the new implementation, because the size always dynamically changes
based on channel load (configured thresholds).
Related: SYS#4912
Change-Id: Id17f947c92cdfc0eb9541a9bf066338169caaeb5
See updated documentation section in manuals/chapters/bts.adoc regarding
an explanation on how the system works.
Related: SYS#4911
Change-Id: I952c9eeae02809c7184078c655574ec817902e06
With upcoming next commit, the file will contain far more code that
simply ramping, so rename it to be more generic.
Change-Id: I8c368ab87e264439dea4ccf556821a44664cdbb0
In the big mess of gsm_data we reached a point where we have multiple
functions doing the same thing, most probably because it's hard finding
stuff in there. Let's drop one of them (the one which less callers) and
move it to bts.*, where it belongs.
Change-Id: I9071a0ab250844619280fbe2be63ed99f2c87eb1
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
In various places that receive an error cause from RSL and place it in
lchan.release.rsl_error_cause, translate it to an RR cause and place that in
the recently added lchan.release.rr_cause. Hence the RR Channel Release message
now reflects more specific error causes when the reason for the error was
received in an RSL message's cause value.
Change-Id: I46eb12c91a8c08162b43dd22c7ba825ef3bbc6ac
In lchan.release, add 'cause_rr', and set RR Channel Release message's cause
value to lchan.release.cause_rr.
In lchan_release(), do not set lchan.release.rsl_error_cause to the RR cause
value, these are unrelated. Store in new lchan.release.cause_rr instead. The
rsl_error_cause is apparently only used for logging, except for one place in
lchan_fsm_wait_activ_ack() that compares it to RSL_ERR_RCH_ALR_ACTV_ALLOC, so
there should not be a functional difference by this fix.
Propagate the BSSMAP Clear Command cause to the RR Channel Release:
Add struct gscon_clear_cmd_data as event data for GSCON_EV_A_CLEAR_CMD -- so
far it sent the is_csfb flag, add the gsm0808_cause; invoking the event happens
in bssmap_handle_clear_cmd().
Adjust event handling in gscon_fsm_allstate(); there, pass the cause to
gscon_release_lchans(). In gscon_release_lchans(), pass the cause to
gscon_release_lchan(), and then lchan_release(), which sets the new
lchan.release.cause_rr to the passed cause value.
As soon as the lchan FSM enters the proper state, it calls
gsm48_send_rr_release(). There, set the cause value in the encoded message to
lchan.release.cause_rr.
Interworking with osmo-msc: so far, osmo-msc fails to set the Clear Command
cause code for normal release, it just passes 0 which amounts to
GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE. Before this patch, osmo-bsc
always sent GSM48_RR_CAUSE_NORMAL in the RR Channel Release, and after this
patch it will receive 0 == GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE from
osmo-msc and more accurately translate that to GSM48_RR_CAUSE_PROT_ERROR_UNSPC.
This means in practice that we will now see an error cause in RR Channel
Release instead of GSM48_RR_CAUSE_NORMAL when working with osmo-msc. For
changing osmo-msc to send GSM0808_CAUSE_CALL_CONTROL instead (which translates
to GSM48_RR_CAUSE_NORMAL), see OS#4664 and change-id
I1347ed72ae7d7ea73a557b866e764819c5ef8c42 (osmo-msc).
A test for this is in Ie6c99f28b610a67f2d59ec00b3541940e882251b
(osmo-ttcn3-hacks).
Related: SYS#4872
Change-Id: I734cc55c501d61bbdadee81a223b26f9df57f959
Up to 16 SI2quater are multiplexed; each fits 3 EARFCNS, so the practical
maximum is 48 (of course depending on how many bits are used by other SI2quater
elements).
Change-Id: Iabeed10053ee5899b4def3509aedd25abb2410a9
Starting from ttcn3-bsc-test-sccplite build #777, it was noticed
that osmo-bsc crashes with the following message:
Assert failed conn->lchan include/osmocom/bsc/gsm_data.h:1376
The cause of this is a recently merged patch that calls conn_get_bts() during
assignment_fsm rate counter dispatch:
"Count assignment rates per BTS as well"
commit b5ccf09fc4
Change-Id I0009e51d4caf68e762138d98e2e23d49acc3cc1a
The root cause being that the assignment_fsm attempts to count an Assignment
event for a BTS after the lchan has already been released and disassociated
from the conn.
The assertion is found in conn_get_bts(), which is used in various places. In
fact, each caller is a potential DoS risk -- though most are in code paths that
are guaranteed to have an lchan and bts present, having an OSMO_ASSERT() on the
relatively volatile presence of an lchan is not a good idea for osmo-bsc's
stability and error resilience.
- Change conn_get_bts() to return NULL in the lack of an lchan.
- Adjust all callers of conn_get_bts() to gracefully handle a NULL return val.
- Same for cgi_for_msc() and callers, closely related.
Here is a backtrace:
Program received signal SIGABRT
pwndbg> bt
0x0000555555be6e52 in conn_get_bts (conn=0x622000057160) at include/osmocom/bsc/gsm_data.h:1376
0x0000555555c1edc8 in assignment_fsm_timer_cb (fi=0x612000060220) at assignment_fsm.c:758
0x00007ffff72b1104 in fsm_tmr_cb (data=0x612000060220) at libosmocore/src/fsm.c:325
0x00007ffff72ab062 in osmo_timers_update () at libosmocore/src/timer.c:257
0x00007ffff72ab5d2 in _osmo_select_main (polling=0) at libosmocore/src/select.c:260
0x00007ffff72abd2f in osmo_select_main_ctx (polling=<optimized out>) at libosmocore/src/select.c:291
0x0000555555e1b81b in main (argc=3, argv=0x7fffffffe1b8) at osmo_bsc_main.c:953
0x00007ffff6752002 in __libc_start_main () from /usr/lib/libc.so.6
0x0000555555b61bbe in _start ()
In the case of the assignment_fsm counter, we now miss a chance to increase a
BTS counter for a failed Assignment, but this is a separate problem. The main
point of this patch is that osmo-bsc must not crash.
Related: OS#4620, OS#4619
Patch-by: fixeria
Tweaked-by: neels
Fixes: I0009e51d4caf68e762138d98e2e23d49acc3cc1a
Change-Id: Id681dfb0ad654bdb4b71805d1ad4f39a8bf6bbd1
If the BTS downlink CCCH (PCH + AGCH) queue is full, it sends
us an RSL DELETE INDICATION. So far, osmo-bsc logs this as
<0004> abis_rsl.c:2026 Unimplemented Abis RSL TRX message type 0x14
which is not very helpful. Instead, make the log message more
descriptive and add a rate counter for monitoring.
Change-Id: I9bd2966db90e39ccca442d6bc9abc91e9a9147d4
Closes: OS#3190
Tests for these counters are added in I2006f1def5352b4b73d0159bfcaa2da9c64bfe3f
(osmo-ttcn3-hacks).
Change-Id: I2ded757958dfa62b502efbab765203bcadf899e2
As in 3GPP TS 23.236, to offload an MSC, the BSC must be able to avoid
attaching new subscribers to it:
4.5a.1: "UEs being moved from one CN node are stopped from registering to the
same CN node again by an O&M command in BSCs and RNCs connected to the pool."
Change-Id: I6249201c15d0f6565aca643c21d2375c9ca58584
Use the new osmo_mobile_identity API to shed some code dup and simplify.
gsm48_paging_extract_mi() is now unused, drop.
(More refactoring to use osmo_mobile_identity follows in subsequent patch.)
Depends: If4f7be606e54cfa1c59084cf169785b1cbda5cf5 (libosmocore)
Change-Id: Id6cccaac64392b737b3bba8f3a22a88009adb23b
This adds the assignment counters for the BTS as well and changes the
assignment_count() macro to increase both the counters for the BSC as
well as the BTS.
Related: SYS#4877
Change-Id: I0009e51d4caf68e762138d98e2e23d49acc3cc1a
Prepare for MSC pooling by NRI. Before introducing actual NRI decoding and MSC
matching, fix the bsc_find_msc() implementation.
(Indicate the places relevant for NRI by "TODO" comments).
bsc_find_msc() puts an MSC to the end of the internal list of MSCs when it was
used. This has problems:
- Modifying the list affects VTY output, e.g. 'show running-config' and
'show mscs' change their order in which MSCs are shown, depending on how
often a round-robin selection has taken place.
- Emergency calls and normal calls potentially pick quite different sets of
eligible MSCs. When the round-robin choices between these sets affect each
other, the choice is not balanced. For example, if only the first MSC is
allow_emerg == true, every emergency call would reset the round-robin state
to the first MSC in the list, also for normal calls. If there are regular
emergency calls, normal calls will then tend to load more onto the first few
MSCs after those picked for emergency calls.
Fix: Never affect the ordering of MSCs in the internal list of MSCs. Instead,
keep a "next_nr" MSC index and determine the next round-robin target like that.
Keep a separate "next_emerg_nr" MSC index so that emergency call round-robin
does no longer cause normal round-robin to skip MSCs.
Further problems in current bsc_find_msc():
- The "blind:" label should also do round-robin.
- The "paging:" part should not attempt to use disconnected MSCs.
- Both should also heed NRI matches (when they are added).
Fix: instead of code dup, determine Paging Response matching with an earlier
Paging Request right at the start. If that yields no usable MSC, continue into
the normal NRI and round-robin selection.
The loop in this patch is inspired by the upcoming implementation of MSC
pooling by NRI, as indicated by the two TODO comments. The point is that, in
the presence of an NRI from a TMSI identity, we always need to iterate all of
the MSCs to find possible NRI matches. The two round-robin sets (Emergency and
non-Emergency) are determined in the same loop iteration for cases that have no
or match no NRI, or where a matching MSC is currently disconnected.
Change-Id: Idf71f07ba5a17d5b870dc1a5a2875b6fedb61291
The separate struct osmo_bsc_data is like another separate struct gsm_network
for no reason. It is labeled "per-BSC data". These days, all of this is a
single BSC and there will not be different sets of osmo_bsc_data.
Drop struct osmo_bsc_data, move its members directly into gsm_network.
Some places tested 'if (net->bsc_data)', which is always true. Modify those
cases to rather do checks like 'if (net->rf_ctrl)', which are also always true
AFAICT, to keep as much unmodified logic as possible in this patch.
Change-Id: Ic7ae65e3b36e6e4b279eb01ad594f1226b5929e0
Another legacy feature. All that this setting effectively does is prevent MSCs
from being contacted for non-emergency calls. To select which MSCs shall handle
emergency calls, there is the allow_emerg flag.
Change-Id: I7fc630d9c35be9a69a0d378d3de2b2312c69690d
The BSC is the wrong network component to originate USSD messaging, as can be
seen in the hacks in the USSD code: for example, the BSC would send a CM
Service Accept message as if an MSC had accepted the connection, dispatch a
USSD and directly send some RR release message (without proper tear down
messaging like the lchan_fsm does these days). This made sense in the osmo-nitb
world, but by now we are aiming for solid 3GPP compliance. The BSC shall not
originate USSD messages.
Deprecate all VTY and CTRL commands related to USSD:
VTY
[no] bsc-welcome-text
[no] bsc-msc-lost-text
[no] bsc-grace-text
[no] missing-msc-text
(the commands with 'no' are ignored, without 'no' lead to an error)
CTRL
ussd-notify-v1
Drop (already unused) ussd.h.
Drop gsm_04_80.h, gsm_04_80_utils.c, and all calling code.
Drop "RF grace" notification, where osmo-bsc was able to notify active
subscribers that the RF was being turned off.
Change-Id: Iaef6f2e01b4dbf2bff0a0bb50d6851f50ae79f6a
It is not entirely clear to me what this used to do once, but I've stumbled
upon this before. By now I am certain that this is a non-standard legacy
feature. The BSC does *not* redirect connections during CC transactions.
Along with this, a bunch of legacy utility functions can be dropped. All of
this is unused code.
(Preparing for MSC pooling.)
Change-Id: Id54afe8ccf0e11b9121a733224054c9565eafb58
Filtering by IMSI in osmo-bsc is a legacy use case with questionable
usefulness. Remove.
Do not keep deprecated VTY commands: those could be dangerous, since
(presumably non-existing) users might assume that the filtering would still be
in place. Rather fail to start osmo-bsc for config with an IMSI ACL.
The IMSI filtering did, if present, provide the logging with an IMSI to print
for the bsc_subscriber. TMSIs should have ended up in logging likewise, which
has never been implemented. The proper way to learn the IMSI would be by the
Common Id message from the MSC. Furthermore, the upcoming MSC pooling feature
will extract the mobile identity again, and will hence make sure that both IMSI
and TMSI identities, as available, end up in the bsc_subscriber and will be
logged again.
So long, IMSI ACL, and thanks for all the fish.
Change-Id: I89727af5387e8360362e995fdee959883c37d89a
The bsc_msc_data->rtp_base has been unused ever since we introduced the exernal
MGW in osmo-bsc [1]. The vty command also still exists. Deprecate the vty
command, remove the member.
[1] "mgcp: use osmo-mgw to switch RTP streams"
commit 39c609b7c9
Change-Id Ia2882b7ca31a3219c676986e85045fa08a425d7a
Change-Id: Id14fa3066ca5d472a817593074a6222f159168a8
We decode the mesage and print it to the log files at ERROR log level.
We also count it in the BSSMAP message counters. There is not much
else we could do about it.
Depends: If8afd2d096fb66c6c2f255a08fc1129de3d09cec (libosmocore)
Change-Id: Ib4cd94f185f751b2384842222678ff671ac413c4
This is a corner case but still we should count the events to
know when is this happening. And for the number of paging requests
to match the number of paging responses.
Change-Id: I1755be40d29980b75353cb4b8087d1ce0d92854a
We already have counters for Rx side, now we also count Tx side.
See comments in the msc_ctr_description array implementation for
the details.
Change-Id: I89a173f6bdd9a3c21233fe01d07ab2ff0442bb10
It's useful to know how many BTS are actually configured to compare
it to a number of connected BTS's.
Change-Id: I41cb60f9cb962003227e4a7b63db05acbcdb6f4c
Currently only supports a single MCTR with fixed configuration
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I96b8bb2c01c05bf153fc924f62bd6aafa96725ee
Starting from G12R13 the MCTR swiches to BSC controlled mode. And
although we think we know how to configure it (via MCTR Conf Req),
something doesn't work right and the timeslot configuration is not
accepted. (TS Conf Result shows "Data not according to request").
So as a workaround for now, we use this version of the protocol where
we don't configure the MCTR (it's in "BTS controlled mode") and with
this protocol, the BTS accepts our timeslot config and we can bring
the system up.
This commit add a generic option to limit either OML or RSL IWD
version to any value. It also keeps track of the actual negotation
version so we can react to it in other places of the code.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I8f0b0ba72056ea4250fe490e7a38630c77c04f65
better version limit
Change-Id: Ia789f8ede3eab7eeca6c759da0109e0b53398f60
The existing Nokia *Site code destroyed the LAPD SAP instance for OML
while processing an OML message. Once the stack frame returned back
to the LAPD code, the LAPD SAP was gone -> segfault.
Let's work around this by moving deletion of the LAPD SAP out-of-line
by starting a timer 0ms in the future. Not particularly nice, but
effective.
Change-Id: I6270c7210f600e53f845561898245d2fd30a368d
Closes: OS#1761
/usr/bin/ld: bsc_subscr_conn_fsm.o:/home/laforge/projects/git/osmo-bsc/src/osmo-bsc/../../include/osmocom/bsc/handover.h:26: multiple definition of `mr'; abis_rsl.o:/home/laforge/projects/git/osmo-bsc/src/osmo-bsc/../../include/osmocom/bsc/handover.h:26: first defined here
See also https://alioth-lists.debian.net/pipermail/debian-mobcom-maintainers/Week-of-Mon-20200413/000649.html
Change-Id: Ic21af84f2a6de48d220940f30dad02a0e7683ce8
According to 3GPP TS 44.060, section 12.24, GPRS Cell Options IE
contains two parameters related to 11 bit Access Burst support:
- ACCESS_BURST_TYPE - whether the 8 or 11 bit format shall be
used in the PACKET CHANNEL REQUEST message, the PTCCH/U block,
PACKET CONTROL ACKNOWLEDGMENT and the PS HANDOVER ACCESS
messages on the PRACH (if present).
- EGPRS_PACKET_CHANNEL_REQUEST - whether EGPRS capable MSs shall
use EGPRS PACKET CHANNEL REQUEST message for Uplink TBF
establishment on the RACH or on the PRACH (if present).
The VTY option 'gprs 11bit_rach_support_for_egprs' actually controls
the second parameter - EGPRS_PACKET_CHANNEL_REQUEST, though it may
be hard to understand this from its name and description.
This patch is actually a group of tightly related changes:
- deprecate 'gprs 11bit_rach_support_for_egprs (0|1)':
- update its description to avoid any possible confusion,
- print a warning if it's used in non-EGPRS mode,
- print a warning if it's still used;
- introduce '[no] gprs egprs-packet-channel-request':
- ensure that it can only set / printed in the EGPRS mode;
- take a chance to clean-up / rename the related struct members:
- 'supports_egprs_11bit_rach' -> bool 'egprs_pkt_chan_request',
- remove 'supports_egprs_11bit_rach' from 'gprs_cell_options'
because we already have 'ext_info.use_egprs_p_ch_req' there.
Change-Id: Ied5bd10a806aeeac65ef32339d4ab0e3700e5da9
This dates back to a time where osmo-bsc_nat was in the same repository,
which is a long time ago.
Change-Id: Id965295dfe04f8bd5ce831db70c86f67b8dc290b
Save OML failure reports from each BTS. Add a VTY command to display them
conveniently and optionally clear the list.
OsmoBSC> show bts 0 fail-rep
[2020-03-23 14:51:22] Type=processing failure, Severity=minor failure, Probable cause=Manufacturer specific values: Software warning, Additional text=test message sent from VTY
[2020-03-23 14:51:19] Type=processing failure, Severity=minor failure, Probable cause=Manufacturer specific values: Software warning, Additional text=test message sent from VTY
Related: OS#1605
Change-Id: I18aa17a721cd5eb1c98926dc2367229c0a50bc78
Separate raw input parsing from handling the failure report. A follow-up
patch will use the new parsing function to print saved failure reports
to the VTY.
While at it, put struct tlv_parsed inside struct nm_fail_rep_signal_data
instead of a pointer, so we don't need an additional alloc. Also add
error handling to the abis_nm_tlv_parse() call.
Related: OS#1605
Change-Id: Ia51004faf620aa4d40435d58c70d758c9d0054d8
Refuse to start with mutually exclusive codec settings, unless
allow-unusable-timeslots is set in the network section of the config.
The checks were already implemented and fill the error log if the config
is invalid.
Related: OS#3739
Change-Id: I3ccfc3b0a8641400cb97a23b24d7ed92d2ad25cd
OM2000 is not only used for the venerable RBS2000 family, but also
for the more modern RBS6000 family, specifically the DUG 20 GSM
baseband unit.
In RBS6000, there are some protocol extensions which are not yet fully
understood. However, we are understanding some bits around the MCTR
(multi carrier transceiver?), a new MO that appears to be present for
every physical RUS (Radio Unit) attached to the DUG 20.
Let's add what we have learned so far.
Thanks to Sylvain Munaut for his help with this.
Change-Id: Ib868358eca12b94c4fcca58e94ec8ab1a4edfda2
Let's not just pass around the raw msgb, but also all other metadata,
such as the decoded parts of the TS 12.21 message.
As there's no current consumer of that signal, this creates no
compatibility issues.
Change-Id: I5d4d9d422b4e23348ffbe69c6e87a31d5574f90d
As per 3GPP TS 45.002, section 3.3.2.3, and table 3 of clause 7,
the following limitations apply mapping of CCCH/BCCH channels:
- TS0/C0 shall be configured as CCCH/BCCH (optionally combined);
- combined CCCH (CCCH+SDCCH4) can only be used on TS0;
- additional CCCHs can be on TS2, TS4, and TS6;
- additional CCCHs are not allowed if TS0 is combined.
Let's make sure that OsmoBSC is properly configured before starring.
Change-Id: I758ef80f7884ba35cdf59d671ee30222ffb9d68b
In addition to transmission of the ETWS Primary Notification via all
dedicated channels, we also need to send it to the BTS for transmission
via PCH (P1 Rest Octets) and for forwarding to PCU for PACCH
transmission.
Change-Id: I7e45b0373458a4348b12b92dd92861062532548b
As soon as we have received an ETWS primary notification message from
the CBC, we should transmit it as "RR Application Information" to all
dedicated channels.
Change-Id: I913d0237cffdcb95037da8489acef5f32a7fc02e
This adds code to handle CBSP (Cell Broadcast Service Protocol)
from the CBC (Cell Broadcast Centre), as well as BSC-internal data
structures for scheduling the various SMSCB on the CBCH of each BTS.
There are currently one known shortcoming in the code: We don't yet
verify if keepalives are received within repetition period.
Change-Id: Ia0a0de862a104d0f447a5d6e56c7c83981b825c7