It is possible to change the neighbor-list mode via the VTY from
automatic mode to manual neighbor-list configuration. In the manual
mode, the user can add ARFCN values manually. This command can be found
under the bts node. Lets add pendant of this command on the control
interface as well.
Change-Id: Id97bc0d31a358db6221c385761773fb48670c921
Related: SYS#5641
The VTY allows flexible control over the neighbor cell information via
the neighbor command, which can be found in the configure terminal under
the bts node. Lets add pendant of this command on the control interface
as well.
Change-Id: I343a40e18fa9b91e6c381912c0426a002841e079
Related: SYS#5641
They will gain support to be activated as SDCCH/8 soon too.
Related: OS#5309
Depends: libosmocore.git I56dcfe4d17899630b17f80145c3ced72f1e91e68
Change-Id: Id5b89fe589a52ff88486435ac43809edb4b80f98
This new CTRL interface allows users of this BSC (such as attached PCU)
to gather neighbor information.
This interface is needed for PCU to translate ARFCN+BSIC keys provided
by MS in the Um side into CGI + RAC keys used to identify target cells
in RIM procedures against SGSNs on the Gb interface.
This patch extends the already existing neighbor information storage in
the VTY by allowing storage of CGI + RAC (RAC couldn't be stored
beforehand).
Related: SYS#4909
Depends: libosmocore.git Change-Id If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ib07c9d23026332a207d4b7a0f7b4e76c0094e379
The CTRL connect already includes 30 retries with .1 seconds delay each, so
there is no point in adding a fixed two second delay that unnecessarily drags
out test duration for each test.
Change-Id: I830fabbd037d6e945956a99aa3f5e4d4015ea165
Before they were set with a value of 0, which had no related enum field,
but since in general all comparsions are done against NM_STATE_UNLOCKED
they also hold valid.
The major change in behavior with this patch is upon OML link down,
where gsm_bts_mo_reset() is called on all objects. This way, upon OML
re-establishment we have again all objects as Locked again, which is the
expected default value as per TS 12.21.
Change-Id: I68ae0bc51a565f903b47cf72f3e3dd6f1a2d2651
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I438ca0c4b8e7957d0f347a5b2f5c4cb93f9325e6
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
Expand MCC-MNC test cases: show that the CTRL interface currently does not
preserve the third digit of the MNC if it is zero. These will be fixed by
I8e722103344186fde118b26d8353db95a4581daa
Change-Id: I5b097dbb6329f284e3b4914a744d5c3ad628f715
The ipa.py has been moved to osmo-python-tests as osmo_ipa - use it for
vty and ctrl tests instead of local copy. The soap.py and twisted_ipa.py
are not BSC-specific: leftovers from repository split which are now
available in osmo-python-tests as well.
Change-Id: Ia4285b18b152b070c148228604d1e61a8adedba1
According to documentation (and personal experience), AM_PATH_PYTHON
selects the highest version of python, no matter if major version is
different, which means if both python2 and 3 are available, 3 will be
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
As {vty,ctrl}_test_runner.py require python2 and are incompatible with
python3, let's instead rely on the system having a "python2" binary
available, which is the case in most distros.
Change-Id: Id22e157d1bee453babdfa7ed04c506390b0f17bb
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
arehbein
Philipp Maier
Pau Espin
Oliver Smith
Harald Welte
Neels Hofmeyr