In cases where a codec has no fixed (IANA) payload type number, a
dynamically coosen payload type number is used. For the route between
BSC and MSC 3GPP as designated certain payload type numbers. However,
beond that, those payload type numbers may not necessarly apply. The
RTP communication between BTS and BSC still might run on a completely
different payload type number.
libosmo-netif contains a header file which payload type numbers
shall be used. Lets use those in order to signal the same payload type
numbers as we actually use in the RTP packets to the MGW.
Change-Id: I507a1b1446c8f140b2950d73cf737797604c1ac3
Related: OS#2728
Related: OS#3384
The function mgcp_pick_codec is responsible to set the codec
information. In cases whee the codec type can not be determined
correctly it sets verb_info->codecs_len = 0, indicating to the caller
that no codocs are set. However, after that it does not return, it sets
an invalid codec anyway.
- Add missing return to keep the no-codec setting in case of error.
Change-Id: I8d1f8553357b6ad328ab1e5d4525fad0dd282a42
I often see "ERROR [ST_CLEARING] Entering ST_CLEARING not permitted!", avoid
the bogus error messages by checking entering ST_CLEARING only if not in it
yet. Still don't allow re-entering, to not restart the timeout.
Change-Id: Ia1f171c08dcbc529f907a20eed43bf5ee3a452b3
Remove as much as possible from bsc_api.h. Use '#pragma once'. Tweak head
comment.
BSC_API_CONN_POL_{ACCEPT,REJECT}: only user is static complete_layer3(), just
use a bool return value instead.
msc_connected(): only used in osmo_bsc_api.c, make static there.
Instead of including gsm_data.h, declare structs opaquely, include stdint.h.
codec_pref_test.c used this as indirect gsm_data.h include via osmo_bsc.h,
include gsm_data.h there directly.
osmo_bsc.h: instead of including bsc_api.h, declare opaque structs.
gsm_04_08_rr.h: declare opaque structs to replace indirect include of
gsm_data.h.
Change-Id: Ia9c0f9828317236048e40ec9ecf9990592e2190a
gsm0808_page() is just a thin wrapper for rsl_paging_cmd(), the only caller is
page_ms() from paging.c. Directly call rsl_paging_cmd() instead.
Move gsm0808_cipher_mode() to the only caller in osmo_bsc_bssap.c, make static.
Change-Id: Ib7ce026b52d4ba3e53a8b2824e74ea92432c48c5
The 'handover any' VTY command is only useful for testing. It is even more
useful if it doesn't always pick the first used lchan but produces more random
handovers.
The algorithm takes a random number as input, iterates over used lchans once,
and if the random number is larger, takes modulo of the nr of used lchans
counted. A second iteration will then produce a match.
Instead of figuring out the lchan type logic in bsc_vty.c, just use
lchan_select_by_type();
Change-Id: I50b70e02d665b967e401db65581e110bc83101e7
If a release event is being handled, ignore other ricocheting release events
until that release handling has concluded.
For example, if an lchan is regularly released, it signals the lchan RTP FSM to
release, which then calls back to say "RTP is released" on termination -- this
should not trigger other state changes than the initial release intends.
Change-Id: Iec41e006b6ab9d0f618d36925341f9536353e5d8
In various FSMs, some events may appear later or earlier without need of
action. Do not indicate these as 'ERROR' (event not permitted), but allow and
ignore them.
Debug-log about some of those.
From the old code, we've taken over the habit to change into
WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still
receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error
message, just silently accept it.
Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab
If PDCH ACT sending fails and we go back to UNUSED, the UNUSED onenter goes
right back to PDCH ACT and we loop. Avoid by going straight to broken state.
Actually, if we can't send messages, the timeslot is obviously broken, so also
enter the broken state if PDCH deactivation fails to be sent out.
Change-Id: Iebaffd0547a9651c5ba435b54dedab99c2cfdd31
Noticed by ttcn3-bsc-test: after TC_ms_rel_ind_does_not_cause_bssmap_reset the
test TC_dyn_pdch_ipa_act_deact would fail because RSL was still indicated as
available, and only OML was properly signalled as down.
Before recent commit I4843d03b3237cdcca0ad2041ef6895ff253d8419 to fix nanobts
and use only flags for RSL and OML presence, the timeslot FSM actually checked
RSL link presence and the lacking RSL DOWN event was not noticed.
Change-Id: I66c7fc5fcc676f4960f3d089b8c2ae5bce37ed99
Before this patch, the timeslot FSM receives OML and RSL ready events.
Afterwards, it relies on examining the RSL and OML status to match the received
events. This doesn't work for the ip.access nanobts, which fails to change the
CHANNEL OM's operational status even though it has sent an Opstart ACK. We
receive OML CHANNEL Opstart ACK, but the mo's state left at OP_STATE=Disabled.
We apparently cannot rely on the gsm_abis_mo state as assumed before this
patch, since changing the state depends on each BTS vendor's OML
implementation.
Also, implementation wise, it is better to not include assumptions on RSL and
OML implementations in the timeslot FSM. Simply receive the OML and RSL ready
events and remember that they arrived in dedicated flags.
Remove the no longer needed oml_is_ts_ready() callback from struct
gsm_bts_model added in:
commit 91aa68f762
"dyn TS: init only when both RSL and the Channel OM are established"
I99f29d2ba079f6f4b77f0af12d9784588d2f56b3
This keeps osmo-bts operational while fixing ip.access nanobts, where the
CHANNEL OM's state prevented the timeslot FSM from entering operation.
Change-Id: I4843d03b3237cdcca0ad2041ef6895ff253d8419
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
Rationale: bsc_api.c used to be a kind of kitchen sink for various
implementations, we want to dissolve it. Also, combining 0808 and 0408 in the
same c file causes "weird" linking dependencies for utility and test programs.
bsc_api.c will be completely dissolved in upcoming
Ib7ce026b52d4ba3e53a8b2824e74ea92432c48c5.
Change-Id: Ie8ee334145bf7bc3a601d395ea7ab9b2009b61c7
"utils" suggests thin helpers to aid using a proper API, while this .c file
actually *is* the proper RR API. Rename from "utils" to "rr".
Change-Id: I0ffff63d57f03cb324df8e40e41caea5b55a2c85
In certain situations like handover or assignment, DTAP must not go out via RSL
directly but is cached to be submitted later. Make sure that all RSL DTAP
sending adheres to this:
gscon_submit_rsl_dtap() is the new "public" API to request an RSL DTAP to be
sent. Depending on the gscon's state, this ends up in the cache or is sent
directly. When caching, there is no way to tell whether sending will succeed or
not, so semantically it does not make sense to even return a result code. Just
return void. Change all "public" callers to gscon_submit_rsl_dtap().
Merge gsm0808_submit_dtap() and submit_dtap() guts to gsm0808_send_rsl_dtap(),
static in bsc_subscr_conn_fsm.c: directly send DTAP, assume a conn->lchan to be
present, or otherwise trigger a BSSMAP Clear Request.
The static submit_dtap() becomes a thin convenience wrapper.
Move ho_dtap_cache* functions to bsc_subscr_conn_fsm.c and rename to
gscon_dtap_cache_* -- they are not only for handover, also for assignment.
Function gsm0808_submit_dtap() m
Introduce function gscon_submit_rsl_dtap()
Change-Id: I6ffd7aa641c8905292c769400048c96aa0949585
9-bit BSIC exist in the 3GPP specs, but we don't use them anywhere. Rather
remove that choice from the API and UI.
Change-Id: I29b92f47da2636d3a19f073755f9382fa98f9010
The payload constants for AMR, EFR, GSM-FR, and GSM-HR are already
defined in libosmo-netif, there is no need to re-define them locally.
- include rtp.h from libosmo-netif in abis_rsl.c
- remove duplicate payload type constants
Change-Id: Ib6a866b29d863d6875c67748dbe6b6468941ab29
Related: OS#2728
Legacy compat: we used to not check the BTS codec-pref settings upon assignment
until we added checks for the BTS codec-pref in osmo-bsc
5bc43cd107, change-id
I285234e9c81de74d9fb9907fca2c443b08537435, "codec_pref: check bts codec
support". From that commit onwards, config setups without a 'codec-pref'
potentially stop working (like all osmo-gsm-tester runs just did), because with
no codec-pref settings, now only FR is permitted, while before the patch, we
would allow any codecs as long as MSC and the overall BSC config agree on them.
So, upon BTS initialization, enable all codecs. These get reset to a more fine
grained selection IF a 'codec-support' config appears in the config file (see
bsc_vty.c).
Change-Id: I4650a1f8e350c6f74f48391f43ddfe771be01e1b
The function lchan_free() is supposed to reset the lchan so that
it can be used by another connection. This function does not yet
reset the struct memebers in lchan->abis_ip. This may lead to
confusion if some other end re-uses that lchan and finds old RTP
voice port/ip settings there. Those data must be reset to
ensure it does accidently migrate into an unrelated conext.
- do a memset to 0 on lchan->abis_ip in lchan_free()
Change-Id: I0c99494292cd1d058a19a21413d0ddb51471c6be
Related: OS#3396
The vty option bts->codec-support allows the user to set the supported
codecs per BTS level. However, those values are currently only used to
make the handover decision but the logic that handles the BSSMAP
ASSIGNMENT REQUEST does not check those flags.
- Do not ignore bts->codec-support flags on BSSMAP ASSIGNMENT REQUEST
Change-Id: I285234e9c81de74d9fb9907fca2c443b08537435
Closes: OS#3361
At the moment there are three sources that may advertise a list of
supported audio codec/rate settings. There is the MS that advertises
advertises a speech codec list and the MSC that sends a channel type
information element over A and there are also settings in the bsc
configuration file that may restrict the codec/rate types that are
allowed to use.
The function match_codec_pref() looks at all of the three buckets and
selects a codec that satisfies all three. This is already a somewhat
complicated process, overit is very isolated, so lets give it its own
c-file.
Due to the lack of unit-tests it is very hard to make changes here so
lets add also unit-test to make sure that regressions are catched early.
- Put match_codec_pref() and all its helper functions into a separate
c-file.
- Add a unit test.
Change-Id: Iabedfdcec8b99a319f2d57cbea45c5e36c7b6e29
Related: OS#3361
Before this, a handover request in a conn state that disallows it would leave a
lingering handover state in the conn, also thwarting any future handover
attempts. (It would be deallocated on conn teardown, so no memleak.)
Change-Id: I839a05495ae93c5dbbd1616efa2469e5b1990a61
If an invalid phys_chan_config is specified in osmo-bsc.cfg, raise
a parsing error at program startup.
If an invalid phys_chan_config is specified in in the VTY while
the program is running, show a warning to inform the user that
the configuration change was not applied.
Change-Id: I97baa359464a0e94de2497bc9214b99ed2a24041
Related: OS#1876
xua_msg allocations should not go unnoticed by our root ctx. libosmo-sigtran
recently added this API to fix that.
Depends: I618878680a096a7f7fc2d83098590f2e4cb08870 (libosmo-sccp)
Change-Id: I8d5edda17be82e0cb4a1af3e2a62cbcb3a2ddda3
Previous state is harmless because the pointer is stored but not used in
that function. However, it's more clear this way.
Change-Id: I048ebc120306ea30ea973d6ee16ed84c9f341183
While GSCON is setting the codec info when operating on the MGW, LCLS
is not doing that yet. This means that the MDCX messages that are
sent by LCLS do not contain any payload type and also no ptime or
rtpmap fields. This also causes the following TTCN3 tests to fail:
TC_lcls_connect_break
TC_lcls_connect_clear
TC_lcls_gcr_bway_connect
TC_lcls_gcr_bway_dont_connect_csc
- Make mgcp_pick_codec() public as bsc_subscr_pick_codec()
- use bsc_subscr_pick_codec() to set codec info in osmo_bsc_lcls.c
Change-Id: I383d55fa602cda0926dd701ee517a299db578260
Closes: OS#3358
The GSCON FSM does not care about the codec information when performing
interactions with the MGW. Before upgrading the client the codec
information was hardcoded to AMR inside the client. Now the client
offers APIs to set the codec information. Since this feature is new,
osmo-bsc does not set any codec information yet, which causes many of
the TTCN3 tests to fail. So lets add some logic to pick suitable codec
info.
- Hardcode ptime to 20 (is the same for all possible codecs)
- Select a codec according to the flags in userplane
Change-Id: Ibddc3492572b39f166e3a1b8b8120813ce2dadc2
Related: OS#2728
Commit "dyn ts, bts_ipaccess_nanobts.c: init PDCH on Chan OPSTART ACK"
bf7099262a Icf6e25ff068e8a2600562d52726ead65e864ec02
introduced signal S_NM_OPSTART_ACK and passed the FOM header to identify the BTS
by. But the FOM header's BTS number is zero on each Abis/IP link, and the BTS
and TRX are actually identified by msgb->dst == e1inp_sign_link, member trx. So
the initial implementation associated *all* Channel OPSTART ACKs with BTS 0.
Pass the entire msgb as S_NM_OPSTART_ACK signal argument, implement a
abis_nm_get_ts() to retrieve the proper timeslot and use that during timeslot
init.
Related: OS#3351 OS#3205
Change-Id: I45ce5c24cb62d00f350df1af1be6c11104d74193
When we receive a RSL CONN FAIL IND, it may be that this happens
before any RLL is established (and hence a lchan->conn exists),
or after the RLLs have been shut down (and hence a lchan->conn doesn't
exist anymore).
So in this function, it is not legal to unconditionally dereference
lchan->conn.
Change-Id: I6380f5d2cd9364560ce3947517c84247cf4af0d4
Closes: OS#3182
3GPP TS 48.006 section 9.2 states clearly that any SCCP connection
release must be initiated by the MSC.
for bsc_subscr_conn_fsm, this means that even after sending the
BSSMAP CLEAR COMPLETE, we must not terminate the FSM, as this would
cause a N-DISCONNET.req to be sent to the stack for the associated
SCCP connection.
The bsc_subscr_conn_fsm instances will hence stay alive until the MSC
eventually decises to release them.
Change-Id: Iaaca220b598609b77b600fcfc2f9a78b221c1fbb
Closes: OS#3331
We use the newly-introduced logging_vty_add_deprecated_subsys() from
libosmovty to make sure old config files will still parse even after
this change.
Change-Id: Ib4f67bb00e1d5460e643717b53f6a4d81278dc5d
In Change-Id OSI6b7354f3b23a26bb4eab12213ca3d3b614c8154f we introduced
a function called osmo_ss7_asp_rx_unknown() which was supposed ot
override a weak symbol in libosmo-sigtran. However, the related change
in libosmo-sigtran (I8616f914192000df0ec6547ff4ada80e0f9042a2) was
modified later on to use explicit registration of a call-back function
instead of weak symbol override.
Let's adopt the osmo-bsc code to make use of this explict call-back
registration.
Change-Id: Id5880ec90dfa00b29cbb0ffea8c8dd50e24742bd
Related: OS#2012
In Change-Id I6b7354f3b23a26bb4eab12213ca3d3b614c8154f we removed
the "dest" vty command, but we should simply ignore it and print
a related warning during start.
Change-Id: I531825061031918bbb1380e1b485b711e81bcd75
Do not invoke OSMO_STRINGIFY() with arbitrary names, just quote instead.
The idea was that OSMO_STRINGIFY() avoids typos by ensuring well-defined names
are stringified, but this highlights that OSMO_STRINGIFY() is in fact usable
with completely arbitrary arguments and actually lacks the validation part :/
Change-Id: I458cd2cd0d6ddb0e6db3bb8d546a20336ae8c5f1
Another small step towards being aware of the subscriber identity.
Any connection initiated by paging will subsequently log the subscriber's
identity -- of course not necessarily the IMSI, if paging was done by TMSI.
This is only for Paging, not the Paging Response; for that see, L3 Complete.
Related: OS#2969
Change-Id: I0ab7bedfe693bb4e42a04fb0585b94a730ff2d9b
This is a tiny step towards being aware of a connection's subscriber identity.
Iff the Layer 3 Complete message contains an IMSI, associate a bsc_subscr with
the conn, so that subsequent logging and possibly meas_feed contains the IMSI.
For any L3 Complete using TMSI, this has no effect whatsoever.
Related: OS#2969
Change-Id: I3b696a0c0932e3abcb682ba231db65755d8c27a6
Keep the bsc_subscr associated with the conn as long as possible, to benefit
logging, which then contains the subscriber identity (if any).
Change-Id: Ifa528b58842a02509bfe0af6915c64bd67058bcd
Instead of silently setting the use count to 1, instead increment with an
explicit bsc_subsct_get(), which then logs the event along with the place that
created the subscriber.
Change-Id: Ia72f8010b7b2e1ca44e3b005c0f2c05f3eeae8d5
The guts of bssap_speech_from_lchan() and lchan_to_chosen_channel() have been
moved to libosmocore; call those instead.
The return value of bssap_speech_from_lchan() used to be -1 on error, now the
error value is 0. The only caller did not handle -1 properly, but fed it
directly to a uint8_t.
On gsm0808_chosen_channel() error, log the error. Proper handling is missing.
Fixing the error handling in send_ass_compl() is a separate issue: currently it
is limited to logging, there is no way to return an error yet, nor any actions
to take on error.
Depends: Icca23940791f97fa64dbc3f2734270b99f9550c1 (libosmocore)
Change-Id: Ib5c940a9dae11c5e26d4b47fa9d95fef889ad2f6
In each code path within rsl_rx_chan_act_nack(), do separate logging of the
NACK to ensure proper termination of each log line.
When receiving a Chan Act NACK, we possibly mixed a LOGP() within an
unterminated other LOGP() that had not been ended with a LOGPC() yet.
Change-Id: Icd2772b21ef3a2ff5af11b7c92dff0ecb4d87ff0
When the BTS responds with a Chan Act NACK, i.e. the lchan could not be
activated, immediately signal Assignment Failure to the MSC (in
handle_chan_nack()).
In handle_chan_nack(), adjust log: instead of waiting for timeout, we now
signal Assignment Failure.
Drop misleading logging from bsc_assign_fail(): instead of transmitting the
Assignment Failure message, it actually signals an FSM event. Leave logging of
that to the FSM logging.
Change-Id: Ib204b4a5272f9b7b60ca5f932cd8a4c857316270
struct bsc_api was used to provide an abstract API for both osmo-bsc and
osmo-msc, between BSC and MSC. That's no longer needed, so get rid of it, to
prevent code turbulences it creates for no reason.
Change-Id: I3fd5888c63a0b4f95520a498320aa105a6d60579
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
If we receive a BSSMAP ASSIGNMENT REQ for a speech channel
containing only a CIC but no AoIP transport layer address, then that's
illegal and must be rejected.
In Change-Id If362a0084de452727cd063063dfb645eca2f9beb we re-introduced
accepting CIC-only ASSIGNMENT REQ, but we failed to verify that this
actually only happens over a SCCPlite A interface.
This fixes the BSC_Tests.TC_assignment_cic_only testcase.
Change-Id: Ia6e3897edca48b9f838ea69939d9b8be7185abf8
The user might not want to enable LCLS support for administrative
reasons. So let's keep it disabled by default, until somebody
explicitly enables it with "lcls-mode mgw-loop".
In the future, we may want to introduce a "lcls-mode bts-loop" where we
don't loop at the BSC-colocated MGW, but where we instruct the BTSs to
feed the RTP directly to each other. This would require a
falt/transparent IP routing between the BTSs in the RAN.
Change-Id: Ied7985056c8cd182bf16119007a08cc5be14459b
Related: OS#1602
This code contains the following code:
* receive/parse/interpret LCLS specific BSSMAP IEs and PDUs
* osmo_fsm handling the various states and their transitions
* call leg correlation (finding the other subscr_conn with same GCR)
* communication between the two call-leg LCLS FSMs
* detection of supported / unsupported LCLS configurations
* display of GCR / LCLS information in "show conns"
* switch the media streams locally using MDCX to the MGW
Closes: OS#1602
Change-Id: I614fade62834def5cafc94c4d2578cd747a3f9f7
It's not a good idea to keep extern declarations copied over
half a dozen C files. Let's move it to a header.
Change-Id: I6f643f1393ba0955d9c0cf1cf78d5c604e7b9451
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
osmo-bsc_nat is too heavily tied into legacy SCCPlite code, as it
is not using libosmo-sigtran/osmo_ss7 so far. It's also full of
customer-specific code and it's shared use of some libbsc code here
has been complicating osmo-bsc development.
The current plan is to continue to use osmo-bsc_nat from openbsc.git
for those legacy users that need it, and not use osmo-bsc_nat in
new 3GPP AoIP setups. Should we ever get a strong demand for an AoIP
based bsc_nat, we can still revisit this later.
Change-Id: Ia05dc76336a64a7f08962843b9a7cc19f2c83387
Also: Move mgcp_timeslot_to_port() next to it, as they are
more or less the inverse transformation of each other.
Change-Id: Ica908e2bb8fc4e59e0d146b428c93a9efc385688
We used to have hard-coded M3UA. Let's allow the user to configure
this per MSC using a new "asp-protocol (m3ua|sua|ipa)" VTY command.
For SUA this should just work 1:1 without any trouble. For IPA,
this of course only changes the underlying transport without reflecting
the various differences in terms of BSSMAP ASSIGNMENT, MGCP handling,
etc.
Change-Id: I0800c709e574cedd7f5dd98be81c78782245cd13
Related: OS#2544
The function a_reset_free() is not used anywhere at the code. The
reason for this is that a BSC instance is never cleared once it
is started up. Also the timer number is not according to the spec.
- Remove a_reset_free()
- Fix timer identification number (T4)
- use fi->priv to hold context info
- Fix sourcecode formatting
Change-Id: I72095d52304c520e383755eee6c889bce492cbd4
Related: OS#3102
Previously the MGW configuration was ignored during writing
of the MSC configuration. Let's fix this by calling the
mgcp_client_config_write() function.
Change-Id: I7d1eedb782a4f30bd089838969ce54f27cde060d
Legacy VTY commands were removed in commit
c74a5616bf
== I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Removing the dead VTY commands currently breaks our ttcn3-bts-test and is
likely to create problems with users of osmo-bsc, when their config osmo-bsc
stops working with a mere upgrade.
Instead, add deprecated dummy commands that don't do anything, to not break
existing configs.
Catch all of these legacy commands:
timeout-ping <number>
timeout-pong <number>
timeout-ping advanced
no timeout-ping
no timeout-ping advanced
by defining
timeout-ping ARG
timeout-pong ARG
no timeout-ping [ARG]
I verified manually that starting osmo-bsc with all the abovementioned VTY
commands in the config file works (and produces the deprecation messages).
Change-Id: I95a5bad1ade66ded849cfc20bebb7fc522aecc38
There is a lot of dead code in osmo_bsc_msc.c that used to handle
the IPA multiplexed SSCP lite A interface.
- remove portions of the dead code
- remove IPA Ping related VTY commands
Change-Id: I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
We deliberately ignore errors from page_subscriber() so there is
no point in having a non-void return value.
Provide more context in the error message logged if paging failed.
Add a comment in an implementation override of base_grace_paging_request()
in the test suite to make return value semantics more clear.
Change-Id: Ie18c2ba53d2055d3eaff8c9ed939eb844af6dd2e
Related: I48f5efbcddd98e15256edfca06ba0ae6acb5bab1
Correctly compute the TS 48.008 "speech mode" (codec) for AMR on TCH/F.
There are way too many different ways how to express a given voice
codec. There are two different schemes in TS 48.008 alone, plus one
on TS 48.058 and one in 04.08 / 44.018. Let's avoid unneeded
conversion (that we might get wrong) and avoid storing information in
a sub-struct of the lchan if we can simply derive it from the lchan
at the time we need it.
Also, move BSSAP related encoding/conversion functions closer to the
user (osmo_bsc_bssap), rather than in libbsc.
Without this patch, TCH/F with AMR was erroneously reported as TCH/H
with AMR in the BSSMAP ASSIGNMENT COMPLETE. After this patch, it's
reported correctly.
Change-Id: I6feebfae77fdc93a7ce333a25dd9b9267c5a4a2e
Related: OS#3094
Related: OS#3095
Related: OS#3096
In AMR-type cahnels, the gsm0808_speech_codec doesn't only include
the codec (like EFR/FR/AMR) but also the specific codec configuration,
i.e. the sub-set of AMR modes.
Hence, we cannot convert from a channel type (just the codec) to the
full gsm0808_speech_codec and then memcmp() that with the codec config
received from the MSC. Rather, we must only compare the *type*.
Change-Id: I0a3f362667a689135d5b62d151d491490dfd2976
Related: OS#3094
This error message suggested that parsing a cell identifier list
failed because the list was too short. While, in fact, this code
has no insight into the reason behind the parsing failure.
A generic error message is more appropriate.
Change-Id: I033747e2183984159f1505e772d7c9494b759058
Related: OS#3073
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
This replaces custom cell identifier parsing in the paging code with
calls to the new cell identifier parser implementation in libosmocore
(which was derived from the code that is now being replaced here).
The bssap tests will fail unless this other change is merged to
libosmocore as well: https://gerrit.osmocom.org/#/c/7288/
Related: OS#2847
Change-Id: I9e2002fbbe135287e9ce09caa3f0a85a84529463
Depends: I7f3e8ace26176e9cbfe2542961d2a95662aa4d97
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
The rate counter BSC_CTR_PAGING_ATTEMPTED does not increment when
a paging request is sent to the BSC. The reson for this is that the
function call to rate_ctr_inc() is located in a dead code section.
- Move the function call to rate_ctr_inc() to osmo_bsc_bssmap.c.
incremanet on any paging attempt (valid or not) that is recived
on the A-Interface.
- Remove dead code from paging.c
Change-Id: Iec3eb6724bc655806c3ce3c28448069590d99f91
When the cell identifier list of the BSSMAP paging contains an
"No cell is associated with the transaction." entry then the
paging is dropped and no paging is started at all. This is not
correct. When no cell is associated, the BSS should page the
whole BSS instead.
- Replace respective error case with a paging request to all
bts.
Change-Id: Id85e3a7540bdc13cd0e780e7870f16c35c6a6a50
The BSSMAP Cause value should give a clear indication of why a given
operation failed. Previously we were unconditionally sending
GSM0808_CAUSE_NO_RADIO_RESOURCE_AVAILABLE even in cases where mandatory
IEs were missing or other errors occurred unrelated to resource
availability.
Closes: OS#2759
Change-Id: I86adcae2950cbea6dcac4551cfde1054cb0abad1
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
The bit-mask of permitted ciphers from the MSC (sent in ASSIGNMENT
COMMAND) is intersected with the vty-configured mask a the BSC.
Finally, the best (highest) possible cipher is chosen.
Change-Id: I1d1c8131855bcab2392b4f27f6216bdb2fae10e0
Closes: OS#2461
About half of our log categories/subsystems were inherited from
OsmoNITB, and are no longer used but may confuse the user.
Change-Id: I8b39429f71c0faefdf8158a82093cfb19f44809e
osmo_bsc_sigtran.c uses DRANAP instead of DMSC in two places,
this is not correct.
- change wrong DRANAP to DMSC
Change-Id: I1594d1906cf7d053d00fff52e9dc0ddfd097ed6e
Once upon a time, in the old osmo-bsc-sccplite, there was a restriction
of not being able to handle configurations with both TCH/F and TCH/H
type codecs. This time is long gone, so let's remove this constraint.
Change-Id: Iba0822f57c41cedeeb7f069be540f3a851752a23
Closes: OS#2763
There was always a 1:1 correspondence between gsm_subscriber_connection
and osmo_bsc_sccp_con, so there's really no point in having two separate
dynamically allocated data structures with pointers back and forth and
another linked list around.
Let's merge osmo_bsc_sccp_con into gsm_subscriber_connection for
simplicity.
The resulting code might not be elegant in places, but I've tried to
do only the most simple changes in this patch, while further
simplifications can be done in later subsequent patches.
As a side-effect, this patch also fixes lchan clearing if the MSC
(or the local SCCP provider) hard-disconnects the SCCP connection.
Change-Id: Idd2b733477ee90d24dec369755a00f1c39c93f39
On BSSMAP Assignment Request received from the MSC, store the Speech Codec List
in the subscr conn, so that we may evaluate available codecs during handover
decision. (Will be used, e.g., by handover_decision_2.)
Change-Id: I8222d73085eb777696e365c94214c05d56e6d129
These functions were originally shared between libmsc and libbsc in the old
openbsc.git; now osmo-bsc.git has its own copies, so move them into libbsc.
Change-Id: Ie411c2ce8008accee54782a442d6361e50777a54
Move gsm_data.c and handover_cfg.c to libbsc, where they belong.
This leaves libcommon utterly empty, drop it.
Change-Id: I6178061fa30c7e1a4c22c29d3c8f508b1033569f
Interestingly enough, talloc_ctx_init() actually had not a single caller.
While dropping it, see to it that the few contexts that are actually used in
osmo-bsc.git are indeed initialized in all the main scopes.
Also initialize two void* ctxts as NULL explicitly, to allocate under the NULL
context in case some main scope forgets to branch it off another root context.
(That's bsc, fle and paging, all others actually come in from other libraries.)
Change-Id: I344a3d07e146999e154824837ed95db2b9879356
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
Move bsc_vty_go_parent() to osmo_bsc_main.c and bsc_nat.c, and drop those nodes
that aren't used in the respective main scope.
Change-Id: I22ebb76742e9c5ab9dd608ac089a5c558aceeb36
The decision on how to further process the request depends significantly
on the contents of the only mandatory IE of the ASSIGNMENT REQ. Let's
decode it first.
Change-Id: I030b5ad6f4fc33da9155c8a6061fd982312b20fb
There's nothing wrong with passing the TLVP_VAL/TLVP_LEN directly into
the gsm0808 decoder functions, let's avoid variables that get assigned
and used only once - particularly with such generic names.
Change-Id: I8557b4a9ff4de28b76c7d618631a4700176a8669
This error message is now contained in a loop, and the current iteration
does not know whether paging will fail entirely or if later iterations
will succeed. Update the error message accordingly.
This also makes the error message consistent with the one in page_cgi().
Change-Id: I8ec229702343343dedcbb242b6d0ed170c858511
Do not instruct the MGW to move the RTP to the new lchan before we have
received a HANDOVER DETECT.
Before:
Chan Activ
Chan Activ Ack
IPACC-CRCX
-ACK
IPACC-MDCX
-ACK
MGCP MDCX --> MGW
...
HANDOVER DETECT
Call continues on new lchan
In above sequence, if the HANDOVER DETECT times out, the MGW has moved to the
new lchan which never becomes used and is released. Furthermore, from the IPACC
MDCX until the HANDOVER DETECT, the RTP stream would break off momentarily.
After:
Chan Activ
Chan Activ Ack
IPACC-CRCX
-ACK
IPACC-MDCX
-ACK
...
HANDOVER DETECT
MGCP MDCX --> MGW
Call continues on new lchan
If the HANDOVER DETECT times out, the call happily continues on the old lchan.
This change is inspired by Ivan Kluchnikov's HO work, who implemented a similar
fix in the openbsc.git codebase (branch fairwaves/master-rebase): his patch
moves ipacc_mdcx() to connect RTP to the new lchan from switch_for_handover()
(which triggered on S_ABISIP_CRCX_ACK, i.e. creation of the new lchan) to later
on in ho_detect() a.k.a. the S_LCHAN_HANDOVER_DETECT signal handler:
http://git.osmocom.org/openbsc/commit/?h=fairwaves/master-rebase&id=9507a7a1ea627e07370c9d264816bb190b3b91b8
This patch does essentially the same: remove the mgcp_handover() call from the
MDCX-ACK handling (creation of the new lchan), and add a signal handler for
S_LCHAN_HANDOVER_DETECT to osmo_bsc_mgcp.c to effect the MGW switchover.
Note, it would have been possible to call mgcp_handover() directly from rx of
the HANDOVER DETECT message, but that produces linking fallout in some utils/
projects, which then need to link the mgcp code as well. That is because those
aren't properly separated from the more complex parts of libbsc. Using the
signal is a bit bloaty, but saves the linking hell for now. I've faced a
similar problem twice recently, it would pay off to separate out the simpler
utils/ and ipaccess/ tools so that they don't need to link all of libbsc and
osmo-bsc, at some point (TM).
Change-Id: Iec58c5fcc5697f1775da7ec0111135108ed1fc8f
A subsequent patch will add registration of a signal; cosmetically prepare by
creating a common mgcp_init() function. It makes sense for the FSM registration
to move to it.
Change-Id: I510e1081171706eb3d9fb2db50a9aa4f768929b5
This is mostly no-op code refactoring which makes it easier to maintain the
code for each paging case and reduces the scope of several local variables.
Also, ensure that paging failures where no matching BTS was found are logged
consistently in all cases. The log level changes from ERROR to NOTICE since
this is not necessarily a fatal condition.
Change-Id: If8fdf425145791f4904a70e295bdc3c7d0f4d5f6
This is a simple combination of the LAC and CI cases which have
already been implemented.
The BSC_Tests.TC_paging_imsi_nochan_lac_ci ttcn3 test passes.
The switch statement in bssmap_handle_paging() is getting a bit large,
and scoping of local variables could be improved. I will focus on
cleaning this up later once paging functionality is complete.
Change-Id: If7f596663a97a1db1a00f115a366f4a5a271c127
Depends: Id83f8b3b1ce80a39417176d99fd09f3b394fd19c
Related: OS#2752
This is essentially a case which combines paging by LAI and CI.
Depends: Ic1c72c7f83e53988eb9fedf314b1dc459836833d
Change-Id: Id83f8b3b1ce80a39417176d99fd09f3b394fd19c
Related: OS#2751
We can now either page an invidual BTS directly or page several BTS in a
given location area. This decision is taken based on the contents of the
cell identifier list in the paging request. Select a set of BTS for paging
while processing the cell identifier list, rather than requiring the
paging layer to loop over all BTS in the MSC.
This change requires some adjustment in bssap_test. In particular,
this test must now add a BTS to its network in order to pass.
The purpose of this change is to make the layering a bit cleaner.
There is one functional change: We no longer abort paging if paging fails
for a particular BTS. Instead, we keep trying to page on other BTS.
Change-Id: Ic1c72c7f83e53988eb9fedf314b1dc459836833d
Suggested-by: Harald Welte
Depends: Ic7772e75c3d7fb0df6e17e118bb33b3248352d4d
Related: OS#2753
This builds upon https://gerrit.osmocom.org/#/c/5698/ which implements
support for paging by LAI.
The ttcn3 test TC_paging_imsi_nochan_ci passes with this code when
run in isolation. It does not pass if another paging test (such as
TC_paging_imsi_nochan_lai) is executed beforehand. This problem
looks similar to the scenario tested in TC_paging_imsi_a_reset.
Change-Id: Ic7772e75c3d7fb0df6e17e118bb33b3248352d4d
Depends: Ic3c62ff0fccea586794ea4b3c275a0685cc9326e
Related: OS#2753
do not print an additional log lines when the mgcp FSM gets
halted. This is already done by osmo-fsm
Change-Id: I5aebbcacb68eab3c6afb19991dbf63a02524e4d7
When the FSM runs into an error condition handle_error() is called with
a cause code. The information about the error is then printed by handle_error(),
by this we do not get the sourcecode line of the location where the error
actually happend.
Convey the source code line number of the actual error in handle_error()
Change-Id: Ifa7f2a655474826630988572616cd26e1e2f3464
Add a new control command 'msc.N.connection_status' which can be used
to query the connection status of a particular MSC with number N.
Keep the old control command 'msc_connection_status', which always
queries MSC 0, for backwards compatibility.
Change-Id: Ibd41474a1be80e782b19ec337c856b5efc593fa8
Related: OS#2729
Since 39f62bbcbf the msc_connection_status
variable in osmo_bsc_ctrl.c is no longer updated. Query the connection's
status from the is_connected flag in struct bsc_msc_connection instead.
Makes test BSC_Tests.TC_ctrl_msc_connection_status in ttcn3-bsc-test pass.
However, we only query the connection status of the first MSC. Adapting
the control command to work with mulitple MSCs is left for future work.
Change-Id: I8ab8aac83ef6b7831b6136f7e9e3eddfbb43ecaa
Related: OS#2729
This is a new inline function that hides all accesses to conn->bts.
A follow-up patch will then point this to conn->lchan->ts->trx->bts
to get rid of the bts field.
Change-Id: Ib6cf7097ced34eebe80441c29ab1534f21956a33
The OsmoBSC code contained a refcount leak on bsc_subscr in the paging
code. For every PAGING command received from the MSC we consistently
leaked one refcount, resulting in a resulting memory leak.
Change-Id: I3d0fb406ca2a1042c6c3424e0dd263c1933b0d50
Closes: OS#2780
This command lists the currently-active bsc_subscr and their contents,
the format looks like this:
OsmoBSC> show subscriber all
IMSI TMSI LAC Use
001010123456789 ffffffff 65534 3
001010100000001 a1b2c301 65534 1
Change-Id: Ib9c0c31a0a5a91b42fd832fa0df3460b1a440733
Currently the pasing results from the RTP ip/port are fed into
inet_addr without checking the results.
Check the return code of inet_addr to be sure that the IP-Address
got properly decoded.
Change-Id: I1d0aa7e9b8480e1bef57269e3904399cb99815bb
when a transaction to the MGW times out, then the context
information is freed. Unfortunately the client is not informed
about this and will try to execute the callback anyway.
explicitly cancel the transaction in order to prevent access
to already freed data structures.
Change-Id: I40794dff7d10e2b6a96863a2da7e9fbd5662a1bf
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
Properly match up any A5/N with the MSC's list of permitted algos.
Properly set the reject cause in case of mismatching algorithm choices.
Actually allow choosing A5/1 thru 3 as configured on the VTY, by passing
a5_encryption through to gsm0808_cipher_mode() (instead of a hardcoded 1).
Properly handle failure rc of gsm0808_cipher_mode() by sending a reject
message.
Cosmetically clarify which GSM0808_IE_ENCRYPTION_INFORMATION bits mean what by
means of local variables; add some comments on expected encryption formats; add
comment that the BSC should be able to have more than one a5_encryption.
Related: OS#2745 OS#2755
Change-Id: Ide8a615905555e35be4584b458d4d40345686175
When the MSC has lost its state and issues a RESET, we should not only
clear all ongoing radio connections, but we should also stop any paging.
There's no point in paging a subscriber if the MSC doesn't know about
this paging anymore.
Change-Id: If3f53d3bb66ad2dc02db823cb813590c6b59c700
Closes: OS#2736
Philipp Maier
Neels Hofmeyr
Pau Espin
Harald Welte
Keith Whyte
Neels Hofmeyr