The bsc_msc_data->rtp_base has been unused ever since we introduced the exernal
MGW in osmo-bsc [1]. The vty command also still exists. Deprecate the vty
command, remove the member.
[1] "mgcp: use osmo-mgw to switch RTP streams"
commit 39c609b7c9
Change-Id Ia2882b7ca31a3219c676986e85045fa08a425d7a
Change-Id: Id14fa3066ca5d472a817593074a6222f159168a8
I notice that some merges seem to have missed updating the
bsc_vty_reference.xml file. Re-generating it from current master yields these
changes.
Change-Id: I75269cbed8dd62be23293fd2c1470af6f61e6ad2
According to 3GPP TS 44.060, section 12.24, GPRS Cell Options IE
contains two parameters related to 11 bit Access Burst support:
- ACCESS_BURST_TYPE - whether the 8 or 11 bit format shall be
used in the PACKET CHANNEL REQUEST message, the PTCCH/U block,
PACKET CONTROL ACKNOWLEDGMENT and the PS HANDOVER ACCESS
messages on the PRACH (if present).
- EGPRS_PACKET_CHANNEL_REQUEST - whether EGPRS capable MSs shall
use EGPRS PACKET CHANNEL REQUEST message for Uplink TBF
establishment on the RACH or on the PRACH (if present).
The VTY option 'gprs 11bit_rach_support_for_egprs' actually controls
the second parameter - EGPRS_PACKET_CHANNEL_REQUEST, though it may
be hard to understand this from its name and description.
This patch is actually a group of tightly related changes:
- deprecate 'gprs 11bit_rach_support_for_egprs (0|1)':
- update its description to avoid any possible confusion,
- print a warning if it's used in non-EGPRS mode,
- print a warning if it's still used;
- introduce '[no] gprs egprs-packet-channel-request':
- ensure that it can only set / printed in the EGPRS mode;
- take a chance to clean-up / rename the related struct members:
- 'supports_egprs_11bit_rach' -> bool 'egprs_pkt_chan_request',
- remove 'supports_egprs_11bit_rach' from 'gprs_cell_options'
because we already have 'ext_info.use_egprs_p_ch_req' there.
Change-Id: Ied5bd10a806aeeac65ef32339d4ab0e3700e5da9
This adds code to handle CBSP (Cell Broadcast Service Protocol)
from the CBC (Cell Broadcast Centre), as well as BSC-internal data
structures for scheduling the various SMSCB on the CBCH of each BTS.
There are currently one known shortcoming in the code: We don't yet
verify if keepalives are received within repetition period.
Change-Id: Ia0a0de862a104d0f447a5d6e56c7c83981b825c7
Having different names for the same config setting is misleading, so
let's stick to the one used by osmo-bts.
Change-Id: Ide5ceb5db7403a70313405752579e30d7bb94eac
Re-generate bsc_vty_reference.xml from osmo-bsc, including updates to:
- handover and neighbor config
- SCCP timers
- logging
Change-Id: Ia9ba8d5eba531b1156de57573ab42517e0c1ca15
This is the first update since the libosmocore changes to the 'show
online-help' generated output. Hence the produced document now benefits from
the structural improvements:
- not repeating common commands for every node;
- using section names that match the VTY prompt.
Update bsc_vty_additions.xml to match the new node ID scheme.
Change-Id: I0d856563eee88527fda4c6940aa6cea779175aaa
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
Vadim Yanitskiy
Neels Hofmeyr
Oliver Smith
Martin Hauke
Harald Welte
Eric Wild
Daniel Willmann