If no target cell got selected in a handover attempt, enum value NO_HANDOVER is
used. In that case, do not log a lot of errors saying
"invalid enum handover_scope value: none" -- they are misleading.
Change-Id: I98e748bea58ebb02812b6aaa6431c7d4b813242d
Clarify some in-code comments.
Fix descriptions of some handover timers, which still talked of "MO" and "MT"
handover -- which we now call "inter-BSC out" or "inter-BSC in" instead.
Change-Id: I8429a830edd0325893ac90f22fcc05309617bd2d
Run "make maintainer-clean" after publishing manuals, not the other way
around. Otherwise jenkins.sh fails when running for the master branch,
because docs/manuals/Makefile gets deleted although it is still needed
to publish the manuals.
Related: OS#3047
Fixes: 471fd92170 ("contrib/jenkins.sh: run "make maintainer-clean"")
Change-Id: I8ba5369b0948b61c68f43d807312c52465119aa5
If a handover fails when the new lchan is already fully established, osmo-bsc
so far caused two BSSMAP Clear Requests to be sent out to the MSC: one caused
by detaching the lchan from the gscon, one from returning the gscon back to
ST_ACTIVE, which detects that no lchan is present and Clears. In fact only one
of those is necessary.
Checking for the presence of an lchan when entering ST_ACTIVE is an earlier
attempt to catch insane situations. Since then, osmo-bsc has acquired other
logic that will ensure sending a Clear Request in all cases, see
gscon_forget_lchan(). Sending another BSSMAP Clear Request in ST_ACTIVE's
onenter is simply not necessary. Drop gscon_fsm_active_onenter() entirely.
Note: the double Clear Request is currently hit by
TC_ho_out_fail_no_ho_detect(), which currently fails and will pass again after
this patch; however, osmo-bsc should actually not release the lchan at all
during this test, see OS#4093. In other words, osmo-bsc behavior for this
scenario as well as TC_ho_out_fail_no_ho_detect() need to be changed, and the
test will, once fixed, not be useful to trigger this issue anymore.
Related: OS#4078
Change-Id: Iac1519eb8b24e8523caec682f9ac8e6dcf1327ce
bsc_clear_request() is in fact used only within gsm_08_08.c, make it static to
that file.
Since the gscon FSM, "real" BSSMAP Clear are sent only by gscon_bssmap_clear().
bsc_clear_request() remains in use for legacy code paths in gsm_08_08.c:
- the bsc_filter, i.e. for IMSI filtering;
- in move_to_msc(), from handle_cc_setup(), a code path that is in fact not
entirely clear to me. It seems to be an old functionality to serve multiple
MSCs?
Both of which I personally haven't seen in use, are not tested and should
probably be completely removed.
For now contain legacy code in the static context.
Adjust comment.
Change-Id: Ic89d0afad42e4b11183a13d2dc6b7bbf0b822fd9
Old osmo-bsc-sccplite already supported this, but in the migration
over to libosmo-sigtran and to real 3GPP AoIP, this functionality
got lost.
We now create a UDP proxy socket. Any MGCP commands received via IPA
from MSC (or rather: bsc_nat) are retransmitted to the MGW via UDP on
this socket. Any responses back from the MGW received on the UDP
socket are retransmitted back to MSC/bsc_nat as MGCP inside the IPA
multiplex.
Closes: OS#2536
Change-Id: I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
The library has the declarations since 2011, so it's time to
get them removed from here.
Depends: libosmocore d61d517a2e35f482519561bd325652ee7144679a
Change-Id: I5c8d02605a78c6792f616ad423b4491b83f42545
Run it like this:
COMMIT=master DOCKER_PLAYGROUND=~/scm/osmo/docker-playground OSMO_INTERACT_VTY=~/scm/osmo/osmo-python-tests/scripts/osmo_interact_vty.py ./regen_doc.sh
COMMIT will default to current HEAD.
Change-Id: Iedd1f55d021231d86c19b6f14ff296e3a55148c8
Related: OS#1700
Having different names for the same config setting is misleading, so
let's stick to the one used by osmo-bts.
Change-Id: Ide5ceb5db7403a70313405752579e30d7bb94eac
Since in SCCPlite the BSC-attached MGW is controlled by the MSC, we
don't need this kind of signalling. It's only needed for AoIP.
Related: OS#2551
Change-Id: I802fc65c593e42aaa7a15cecab7a2f2b77ade3ea
Having the helper makes it easier to read/find for transport type checks. It
will be ifurther re-used in forthcoming commits.
Change-Id: Ic0ee4c472e29ec3092049e5e23b744395613616d
the 'p_val' variable should represent he 'probabl cause value' and
nothing else. Let's use other local variables for other things.
Change-Id: Ie79279fc1d42cd57e7478820493b250fe38c2f4f
Add a new VTY command "ccch load-indication-threshold <0-100>"
by which the user can configure the threshold after which the BTS
shall send CCCH LOAD IND. It used to be hard-coded to a
default value of 10.
Change-Id: I059fe4627438e26a06e00d84e342b736ab7af440
When displaying the channel (lchan) load, we are interested in the
dedicated channels as available for communication with mobile
stations. If CBCH is enabled, it "steals" one of the SDCCH slots,
so we have to exclude this channel from the count of available
dedicated channels.
Before this patch, A CBCH would show up as "in use" dedicated channel
(so both the total and the in_use count were incremented).
After this patch, neither "total" nor "use" are affected; The CBCH
slot is completely excluded from load statistics.
Change-Id: I606962e4977f122ff05a2d4e756c04c7f38bdaa0
Now that OsmoBTS is generating CBCH LOAD IND messages, let's avoid
spamming the BSC log with notices about receiving this unimplemented
message.
Change-Id: Ida5045ec7a18c1062a3b80a381db52d5c98e9966
Now that OsmoBTS understands about extended CBCH, let's at least
update the BSC side function to allow for other code to generate
such messages.
Change-Id: I77a16b75ce311d63fb022475c8ff25fbbcee7f55
Commit c997ceb750 which added initial code
did use memset(0) on the structure. However, later commit
b407a8aca4 modifying the code forgot to
initialize it, and as a result most of its fields contain garbage.
This results in an MDCX with strange/incorrect values sent when LCLS
loop breaks, breaking TTCN3 test BSC_Tests_LCLS.TC_lcls_connect_break.
Change-Id: Ib1a7d825690db782a5d14f2d8817acf6cb6a52ea
The CID is sent back to the MSC so it can configure its MGW to send
Osmux frames to the BSC MGW using this CID.
Change-Id: I77dfdd965ae828c39a9818669177aefd22bc02f2
The Osmux CID obtained from the MSC is passed to the co-located BSC MGW
to configure the MSC-side MGW conn of a call leg.
Depends on: osmo-mgw.git I73b4c62baf39050da81d65553cbea07bc51163de
Change-Id: I86e7e13fc7921e3209fb764c0e7797e7ec09b79e
In Change-Id If6d40b2407b87aad2227ea7f15533ef01a3771b3 we introduced
the support for both octet-aligned and bandwidth-efficient mode, and
added a related VTY option about it.
However, we accidentially also changed the default behavior. Without
any explicit configuration, we should behave just like we behaved all
those years before: Continue with octet-aligned mode.
Change-Id: I8b6fd8bec05b35d84ad16275d84f9d363e238d2b
Closes: OS#4002
For AoIP, the AoIP Transport Layer Address IE must be included in the Handover
Request Acknowledge message, so the MSC can send RTP to the right place. Add
this IE for AoIP.
Depends: Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576 (libosmocore)
Depends: Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Change-Id: Ia05e37da125eb6e7b7be9b974b73261bd72de1f4
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
To support the 3 possible preferences, the changes needed were:
- Replace 'full_rate' bool with a 3 option enum to represent
the channels types for signalling
- Switch from _pref/_alt to using an array sorted in preference
order
Originally merged as Change-Id I4c7499c8c866ea3ff7b1327edb3615d003d927d3,
reverted because the change broke voice calls. Re-submitting with the fix:
don't forget to set conn->assignment.requires_voice_stream.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I7513d2cbe8b695ba6f031ad11560c63a6535cf2d
osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example
I92a9944acc96398acd6649f9c3c5badec5dd6dcc.
Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API
and use libosmocore's osmo_tdef* API instead.
The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be
able to use it in osmo-msc for inter-MSC handover.
When adding osmo_tdef, the new concept of timer groups was added to the API. It
would make sense to apply group names here as well, but do not modify the VTY
configuration for timers. The future might bring separate groups (or not).
Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore)
Change-Id: I66674a5d8403d820038762888c846bae10ceac58
This reverts commit 94c9324fe0.
Multiple ttcn3 handover tests were broken due to this commit. Let's
merge this once all the other commits pertaining to that fix can be
merged as well.
Fixes: OS#3942
Change-Id: I01d93778fb19c601c21f99ec4d2a3ab8a4a48f67
This variable does not seem to be used anywere in OsmoBSC, seems to be a
remnant from OpenBSC times.
Change-Id: I5e4aa352fa5f16f6ff64738f25afd1a844fa4fcb
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff
During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the
Handover Request message. Actually parse this Chosen Encryption Algorithm IE.
Place the chosen algorithm and the CK into lchan_activate_info->encr so that
the new lchan will use the same ciphering on this new BSS as it did on the old
BSS.
Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
For intra-BSC handover, the previous encryption is copied from the old lchan,
which of course is not available during inter-BSC handover. Hence the lchan
activation info needs to include an explicit encryption information, and we
must not rely on the presence of the previous lchan to copy encryption
information from.
Add struct lchan_activate_info.encr to allow passing encryption info through
lchan_activate() without requiring a previous struct gsm_lchan to be present.
Instead of copying from the old lchan, always copy encryption info to
lchan_activate_info, and during activation, just before sending the Channel
Activation, copy the lchan_activate_info.encr to the new lchan.
This prepares for upcoming I5b269f50bd2092516bfdf87746196983d3ac49d1 which
obtains the encryption information from an intra-BSC-incoming Handover Request
message.
Related: OS#3842
Related: I5b269f50bd2092516bfdf87746196983d3ac49d1
Change-Id: Ib3d259a5711add65ab7298bfa3977855a17a1642