To not modify previous SCCP behavior of OsmoBSC, keep the Lb interface disabled
by default. The following configuration enables the Lb interface:
smlc
enable
Change-Id: I01314a29a2cad6f325d9f4687a9dedca6b90a3ce
Separate the a_reset FSM implementation from BSSMAP and MSC specifics, so that
it can be re-used on the Lb interface.
Move the FSM implementation to bssmap_reset.c and tweak, to match common practices we
have generally established in our osmo_fsm implementations.
Keep a_reset.h and a_reset.c and redirect to bssmap_reset.c.
A difficulty is setting a proper logging category: the FSM definition allows
only one fixed logging category for FSM state transitions and events. Ideally,
the BSSMAP reset fsm would log on DMSC, and the BSSMAP-LE reset fsm would log
on DLCS. Since that is not possible, introduce a separate DRESET logging
category. This in fact matches an item on my wishlist, because if a given MSC
is configured but currently not connected, the previous RESET FSM would
continuously "spam" log LOGL_NOTICE messages indicating that it is resending
RESET, and I often want to silence those messages without silencing the entire
DMSC category. This is now easily possible by setting DRESET logging to
LOGL_ERROR. There is additional "link up" / "link lost" logging on DMSC, so all
interesting info is still visible on DMSC.
Change-Id: Ib3c3a163186c40a93be0dea666230431172136df
Instead of maintaining two variables and re-calculating the bit
position on each iteration, let's use the existing field of the
bit-vector: set it to the first LSB and decrement in the loop.
Change-Id: I1b226a2d5867434c33ae04a0b971dbfd16c4688f
Related: SYS#4868, OS#4545
Ensure that osmo-bsc would not continue to work as usual, if for
some reason we cannot encode or send System Information messages.
Change-Id: I7d3458fb10760e33411f2074a6b2df1c257438d5
According to 3GPP TS 44.018, table 10.5.2.21.1 "Mobile Allocation
information element", in the cell allocation frequency list the
absolute RF channel numbers are placed in increasing order, except
that ARFCN 0, if included in the set, is put in the last position.
This basically means that the last bit of the Mobile Allocation
(MSB on the wire) corresponds to ARFCN 0, if it's included in
the cell allocation frequency list, or the last channel otherwise.
Recently introduced TTCN-3 test cases uncover the following problems:
a) ARFCN 0 is encoded twice: as MSB and LSB of the bit-mask,
b) ARFCN 0 is encoded one bit off its expected location.
Change-Id: I264a66a1405e72940a79e9e20ad6ad8f269a7bbc
Related: SYS#4868, OS#4545
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
Found while playing with "rf_locked 1" on a 2TRX setup with channel
allocator descend. After applying the setting, the 1st TRX is still used
to allocate the channels. After this patch is applied, the BSC correctly
allocates channels from TRX0.
Change-Id: I5201d2749363c9cbd0706177bde09117b163cbe3
Add only a long option to not clutter the cmdline namespace.
To add a long option without a short letter is slightly complex: use the 'flag'
and 'val' mechanism as in 'man 3 getopt' to write an option index to
long_option.
Depends: Ic74bbdb6dc5ea05f03c791cc70184861e39cd492 (libosmocore)
Change-Id: I316efedb2c1652791434ecf14a1e261367cd2fb7
The separate struct osmo_bsc_data is like another separate struct gsm_network
for no reason. It is labeled "per-BSC data". These days, all of this is a
single BSC and there will not be different sets of osmo_bsc_data.
Drop struct osmo_bsc_data, move its members directly into gsm_network.
Some places tested 'if (net->bsc_data)', which is always true. Modify those
cases to rather do checks like 'if (net->rf_ctrl)', which are also always true
AFAICT, to keep as much unmodified logic as possible in this patch.
Change-Id: Ic7ae65e3b36e6e4b279eb01ad594f1226b5929e0
Filtering by IMSI in osmo-bsc is a legacy use case with questionable
usefulness. Remove.
Do not keep deprecated VTY commands: those could be dangerous, since
(presumably non-existing) users might assume that the filtering would still be
in place. Rather fail to start osmo-bsc for config with an IMSI ACL.
The IMSI filtering did, if present, provide the logging with an IMSI to print
for the bsc_subscriber. TMSIs should have ended up in logging likewise, which
has never been implemented. The proper way to learn the IMSI would be by the
Common Id message from the MSC. Furthermore, the upcoming MSC pooling feature
will extract the mobile identity again, and will hence make sure that both IMSI
and TMSI identities, as available, end up in the bsc_subscriber and will be
logged again.
So long, IMSI ACL, and thanks for all the fish.
Change-Id: I89727af5387e8360362e995fdee959883c37d89a
This logging category has been removed in [1], what caused test
case execution failures on our Jenkins (since build #930). The
problem is that configuration files may still contain this
category in 'logging' section (see [2], [3], [4]), and
osmo-bsc would refuse to start because of that.
[1] Id965295dfe04f8bd5ce831db70c86f67b8dc290b
[2] Ie2afacfc15589c26238214cddc00baaf80e993c1
[3] I266d6f6ed54d1457b1ca63b87fc1c29f6dd40caf
[4] If02272c08ba2df37d1295d09c104d11f96abbe1e
Change-Id: I111362d19aba325889bada5a46eea62343c30033
This dates back to a time where osmo-bsc_nat was in the same repository,
which is a long time ago.
Change-Id: Id965295dfe04f8bd5ce831db70c86f67b8dc290b
Refuse to start with mutually exclusive codec settings, unless
allow-unusable-timeslots is set in the network section of the config.
The checks were already implemented and fill the error log if the config
is invalid.
Related: OS#3739
Change-Id: I3ccfc3b0a8641400cb97a23b24d7ed92d2ad25cd
The loglevels of DNM, DFILTER and DPCU are set to low, lets set them all
to NOTICE
Change-Id: I03a5426b341e9908ffc89240f97d6d3ea791b4a8
Related: OS#2577
Since osmo-bsc uses the MGCP client FSMs, it is required to enable this new
feature to guarantee safe operation. The issue is described in detail in commit
logs linked below.
Depends: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78 (libosmocore),
I0adc13a1a998e953b6c850efa2761350dd07e03a (libosmocore)
Related: I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3 (osmo-mgw)
Change-Id: Ib7fce7b7d54dfb87af97544796680919e5929a50
As can be seen from include/osmocom/bsc/gsm_data.h:
- pchan_from_config - channel configuration from the VTY/config
(can be changed from the VTY at runtime, should not affect
the existing RSL/OML connections);
- pchan_on_init - channel configuration after the OML link is
established (pchan_from_config is copied here);
- pchan_is - the *actual* channel configuration currently active.
Since we call bootstrap_bts() during the initialization, even before
establishing any OML/RSL connections, neither pchan_on_init nor
pchan_is can be used. Let's use pchan_from_config instead.
This change fixes the problem discovered by @mqng2 and reported
together with https://gerrit.osmocom.org/c/osmo-bsc/+/15909:
CCCH_CONF in System Information Type 3 does not reflect the
actual channel configuration, and always indicates a single
CCCH combined with SDCCH. This also misleads the lchan
allocation algorithm during the MO connection establishment.
Change-Id: I8f9d7aa27f24b55732a4de933bc834ed930806fd
Do not count the number of additional CCCHs if TS0 is using combined
channel configuration (CCCH+SDCCH4), because they are only allowed
if TS0 is not combined with SDCCH.
Get rid of the 'switch' statement using the following formula:
CCCH_CONFIG = (N << 1)
where N is the number of additional CCCHs.
Change-Id: I1430500999389e9b30e55ea89a8a5ea5071f7957
As per 3GPP TS 45.002, section 3.3.2.3, and table 3 of clause 7,
the following limitations apply mapping of CCCH/BCCH channels:
- TS0/C0 shall be configured as CCCH/BCCH (optionally combined);
- combined CCCH (CCCH+SDCCH4) can only be used on TS0;
- additional CCCHs can be on TS2, TS4, and TS6;
- additional CCCHs are not allowed if TS0 is combined.
Let's make sure that OsmoBSC is properly configured before starring.
Change-Id: I758ef80f7884ba35cdf59d671ee30222ffb9d68b
This adds code to handle CBSP (Cell Broadcast Service Protocol)
from the CBC (Cell Broadcast Centre), as well as BSC-internal data
structures for scheduling the various SMSCB on the CBCH of each BTS.
There are currently one known shortcoming in the code: We don't yet
verify if keepalives are received within repetition period.
Change-Id: Ia0a0de862a104d0f447a5d6e56c7c83981b825c7
osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example
I92a9944acc96398acd6649f9c3c5badec5dd6dcc.
Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
Since we actually want to match by IMSI as specified by filter in VTY.
It will allow to match based on other information later.
Change-Id: Ia73fd2f38e42396db8f6d2cc6b2c163aa8f67f3f
In networks with a couple of different BTSs it may be likely that one
accidently sets up a codec configuration (codec-support)) that will be
mutually exclusive towards the codec configuration for the MSC
(codec-list). We need a check that validates the configuration before
start to catch such configuration flaws quickly.
- Add a check that checks each MSC codec-list against each BTS
codec-support setting.
Change-Id: Ice827896bab1a2330741e0fccc731a04f1a07d38
Related: OS#3625
main() was missing a call to rate_ctr_init(). Without it, the counters
increased properly, but the times per second / minute / hour etc. values
would always stay at zero.
Change-Id: I4466a7aec51673c79b67614c9dde987633e379e0
Related: OS#3579
ipaccess_drop_oml was being called inside an osmo_fd cb context, were
-EBADF must be returned if the structure holding the osmo_fd is freed.
In the middle of the path (see OS#3495 for path tree) it goes through a
signal dispatch, so it's impossible to make sure we return some value to
the osmo_fd cb. As a result, it is required to defer dropping the OML
Link from current code path and do it through a timer.
Fixes following ASan report:
20180822124927913 <0004> abis_nm.c:787 OC=RADIO-CARRIER(02) INST=(00,00,ff): CHANGE ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
20180822124927913 <0004> osmo_bsc_main.c:186 Got CHANGE ADMINISTRATIVE STATE NACK going to drop the OML links.
20180822124927913 <0015> bts_ipaccess_nanobts.c:406 (bts=0) Dropping OML link.
...
=================================================================
==17607==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000060a68 at pc 0x7f5ea8e27086 bp 0x7ffde92b6d80 sp 0x7ffde92b6d78
READ of size 8 at 0x62e000060a68 thread T0
#0 0x7f5ea8e27085 in handle_ts1_write input/ipaccess.c:371
#1 0x7f5ea8e27085 in ipaccess_fd_cb input/ipaccess.c:391
#2 0x7f5ea9147ca8 in osmo_fd_disp_fds libosmocore/src/select.c:217
#3 0x7f5ea9147ca8 in osmo_select_main libosmocore/src/select.c:257
#4 0x555813ab79d6 in main osmo-bsc/osmo_bsc_main.c:922
#5 0x7f5ea76d02e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#6 0x555813ab84e9 in _start (/bin/osmo-bsc+0x34d4e9)
Fixes: OS#3495
Change-Id: I7c794c763481c28e8c35dc9b11d27969e16feb3c
libosmocore recently had the new API introduced for this purpose.
Depends: libosmocore Change-Id Id58ca18eb826b8f4183a7cf0dbb2b38cba702a09
Change-Id: Id07260635327617f8da5050af1e906891a89c530
Noticed by ttcn3-bsc-test: after TC_ms_rel_ind_does_not_cause_bssmap_reset the
test TC_dyn_pdch_ipa_act_deact would fail because RSL was still indicated as
available, and only OML was properly signalled as down.
Before recent commit I4843d03b3237cdcca0ad2041ef6895ff253d8419 to fix nanobts
and use only flags for RSL and OML presence, the timeslot FSM actually checked
RSL link presence and the lacking RSL DOWN event was not noticed.
Change-Id: I66c7fc5fcc676f4960f3d089b8c2ae5bce37ed99
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
xua_msg allocations should not go unnoticed by our root ctx. libosmo-sigtran
recently added this API to fix that.
Depends: I618878680a096a7f7fc2d83098590f2e4cb08870 (libosmo-sccp)
Change-Id: I8d5edda17be82e0cb4a1af3e2a62cbcb3a2ddda3
Previous state is harmless because the pointer is stored but not used in
that function. However, it's more clear this way.
Change-Id: I048ebc120306ea30ea973d6ee16ed84c9f341183
We use the newly-introduced logging_vty_add_deprecated_subsys() from
libosmovty to make sure old config files will still parse even after
this change.
Change-Id: Ib4f67bb00e1d5460e643717b53f6a4d81278dc5d
struct bsc_api was used to provide an abstract API for both osmo-bsc and
osmo-msc, between BSC and MSC. That's no longer needed, so get rid of it, to
prevent code turbulences it creates for no reason.
Change-Id: I3fd5888c63a0b4f95520a498320aa105a6d60579
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
This code contains the following code:
* receive/parse/interpret LCLS specific BSSMAP IEs and PDUs
* osmo_fsm handling the various states and their transitions
* call leg correlation (finding the other subscr_conn with same GCR)
* communication between the two call-leg LCLS FSMs
* detection of supported / unsupported LCLS configurations
* display of GCR / LCLS information in "show conns"
* switch the media streams locally using MDCX to the MGW
Closes: OS#1602
Change-Id: I614fade62834def5cafc94c4d2578cd747a3f9f7
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
About half of our log categories/subsystems were inherited from
OsmoNITB, and are no longer used but may confuse the user.
Change-Id: I8b39429f71c0faefdf8158a82093cfb19f44809e
Interestingly enough, talloc_ctx_init() actually had not a single caller.
While dropping it, see to it that the few contexts that are actually used in
osmo-bsc.git are indeed initialized in all the main scopes.
Also initialize two void* ctxts as NULL explicitly, to allocate under the NULL
context in case some main scope forgets to branch it off another root context.
(That's bsc, fle and paging, all others actually come in from other libraries.)
Change-Id: I344a3d07e146999e154824837ed95db2b9879356
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
Move bsc_vty_go_parent() to osmo_bsc_main.c and bsc_nat.c, and drop those nodes
that aren't used in the respective main scope.
Change-Id: I22ebb76742e9c5ab9dd608ac089a5c558aceeb36
A subsequent patch will add registration of a signal; cosmetically prepare by
creating a common mgcp_init() function. It makes sense for the FSM registration
to move to it.
Change-Id: I510e1081171706eb3d9fb2db50a9aa4f768929b5
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
osmo-bsc currently negotiates the RTP stream directly with the
BTS and reports back the RTP IP/Port on the BTS. This works fine
for a single BTS, but for Handover the port/ip pointing to the
MSC side must not change, so an entity in between the BTSs and
the MSC is required.
Integrate the mgcp-client and use osmo-mgw to switch the RTP
streams.
Depends: osmo-mgw Ib5fcc72775bf72b489ff79ade36fb345d8d20736
Depends: osmo-mgw I44b338b09de45e1675cedf9737fa72dde72e979a
Depends: osmo-mgw I29c5e2fb972896faeb771ba040f015592487fcbe
Change-Id: Ia2882b7ca31a3219c676986e85045fa08a425d7a
The library code for rate counter initialization, which is called
from the descendants of bsc_network_alloc() might already want to
log something (particularly after Change-Id
Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 in libosmocore), so the
logging framework must be initialized before.
Change-Id: I1e893c97e023e63489fe8c46539b5e507d3cec8f
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Neels Hofmeyr
Vadim Yanitskiy
Philipp Maier
Pau Espin
Harald Welte
Oliver Smith
Martin Hauke
Keith Whyte