For several years now we are using line lengths longer than 80chars,
let's re-format this code more in-line with our new style.
Change-Id: I8143280358c0e23ca7e32b882e952eac991e105b
This allows a given BTS model driver to initialize data structures
specific cor this BTS instance (or a TRX for this BTS instance).
Change-Id: Icbad9cdc12221c9ad997267d77e5414edcbac538
Before the recent changes, the MS Power Parameters IE would always
be included empty in RSL CHANnel ACTIVation messages iff the BTS
type is 'osmo-bts'. Then this behavior was changed, so the user
would need to enable dynamic power control explicitly.
This is a regression, let's revert it back to the old behaviour.
Change-Id: Idb453fc894584ccf4f5f8b45a24421db958e9478
Related: SYS#4918
According to 3GPP TS 45.008, section A.3.2.1:
c) Comparison of RXQUAL_XX with L_RXQUAL_XX_P (XX = DL or UL):
Increase XX_TXPWR if at least P3 averaged values out of N3
averaged values are greater (worse quality) than L_RXQUAL_XX_P.
d) Comparison of RXQUAL_XX with U_RXQUAL_XX_P (XX = DL or UL):
Decrease XX_TXPWR if at least P4 averaged values out of N4
averaged values are lower (better quality) than U_RXQUAL_XX_P.
Given that RxQual is a value in range 0 .. 7, where 0 is the best
and 7 is the worst: L_RXQUAL_XX_P must define the worst quality,
while U_RXQUAL_XX_P must define the best quality value.
Change-Id: I0f37b23ed360782f3c1f4275234c4e18a17aa89b
Related: SYS#4918
The meaningful names expose that some of those tests are apparently
quite similar.
With names like this it is far easier to see whether a specific scenario
is already tested or not, and find a test when looking for a specific
scenario.
Change-Id: I6f6d65d818fd1265e8ff94a2e0afba6392c50eb9
The handover_fsm activates voice on a target lchan only when the source
lchan has an osmo_mgcpc_ep_ci pointer for the BTS side. Since that
struct is opaque, set a fake pointer and override the
osmo_mgcpc_ep_ci_name() function so that the pointer is never
dereferenced.
This more accurately models the RTP stream setup events during handover.
Change-Id: Ibc22001bf9e9874dd3f44f0acac8b6a4c1069aa7
Do not show source file and line numbers in the log, so that the log
output remains unchanged for unrelated changes.
Also show the log level.
Change-Id: I8ebcaf16cd14881a3a41616dcff175e173db9ae8
So far we skipped the HO Detection message, because the FSM also accepts
a handover when the Handover Complete arrives without a Detection.
Rather model the real behavior.
Also send the EST IND message and RTP-ready events from the ho
detection.
Change-Id: Ib676e74f23ef9cd1b55262117822b0e110013bdc
Drop the string arrays, and move the 32 handover tests to separate
script files. Instead of the peculiar implementation and instead of
cryptic commands, implement the handover test scripts as a VTY.
handover_test.c now sets up a VTY with handover testing VTY commands. It
also features the complete and unabridged VTY configuration nodes of
osmo-bsc itself. That allows dropping various ho script commands.
Before:
static char *test_case_14[] = {
"Handover to congested cell, if RX level is below minimum\n\n"
"The better neighbor cell is congested, so no handover is performed.\n"
"If the RX level of the current cell drops below minimum acceptable\n"
"level, the handover is performed.\n",
"create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"expect-ts-use", "0", "0", "*", "TCH/F", "-", "-", "-", "-", "-", "-",
"set-min-free", "1", "TCH/F", "4",
"set-min-free", "1", "TCH/H", "4",
"meas-rep", "0","0","1","0", "10","0", "1","0","30",
"expect-no-chan",
"meas-rep", "0","0","1","0", "9","0", "1","0","30",
"expect-chan", "1", "1",
"ack-chan",
"expect-ho", "0", "1",
"ho-complete",
"expect-ts-use", "0", "0", "*", "-", "-", "-", "-", "-", "-", "-",
"expect-ts-use", "1", "0", "*", "TCH/F", "-", "-", "-", "-", "-", "-",
}
After:
# Handover to congested cell, if RX level is below minimum
# The better neighbor cell is congested, so no handover is performed.
# If the RX level of the current cell drops below minimum acceptable
# level, the handover is performed.
create-n-bts 2
set-ts-use trx 0 0 states * TCH/F - - - - - -
network
bts 1
handover2 min-free-slots tch/f 4
handover2 min-free-slots tch/h 4
meas-rep lchan 0 0 1 0 rxlev 10 rxqual 0 ta 0 neighbors 30
expect-no-chan
meas-rep lchan 0 0 1 0 rxlev 9 rxqual 0 ta 0 neighbors 30
expect-ho from lchan 0 0 1 0 to lchan 1 0 1 0
expect-ts-use trx 0 0 states * - - - - - - -
expect-ts-use trx 1 0 states * TCH/F - - - - - -
Note how osmo-bsc's stock vty config nodes seamlessly integrate in the
test steps: just enter a configuration node, modify some values, and
indenting trivially takes care of exiting nodes correctly.
Running a test manually:
./handover_test test_0123.ho_vty
Instead of calling each test separately in testsuite.at, have a
handover_tests.sh script that picks up new tests just by presence of
files named test*.ho_vty.
Rationale:
It was considered to move handover tests to the TTCN suite, but there is
an advantage in having these C tests: they run super fast and catch bugs
even in the gerrit verification job, potentially saving a lot of time.
It is a reality that I need more of these tests, for dynamic timeslots
and TCH/F <-> TCH/H switches. The way the handover tests are written, as
arrays of strings containing cryptic fixed-argument script commands, has
been a pain to work with from the start, and now I am no longer willing
to endure that pain.
Change-Id: Ie238ebe41039d3fa44c9699937589e000883e052
If the user doesn't specify any CON connection groups in the config
file, then the CON is not used. The current code runs into an error
condition, as abis_om2k_tx_con_conf_req() never sends the CON CONF REQ
if the groups list is empty, but we still wait in the FSM for the
arrival of a CFG REQ ACCEPT. The CON FSM eventually times out in T10
and we proceed with the IS, ignoring the error.
With this patch, we simply skip the entire CON MO in case there is no
related configuration.
Change-Id: Ia4d5bd96734686381f04aa3b380b17a161a31174
In I68ae0bc51a565f903b47cf72f3e3dd6f1a2d2651 we started to
initialize all (TS 12.21) NM MO state to LOCKED by default,
which means BTSs not using TS 12.21 are stumbling across
a general check in bts_isdn_sign_link() and will fail to
process and uplink RSL messages.
Change-Id: I4450cc47ede4005bf4bbd4af8d5a22c78377d4cd
Related: OSE4914
Thanks to this message, there is no need to include MS/BS Power
Control parameters in every RSL CHANnel ACTIvation message.
Instead, we send them only once, and then send empty IEs.
Change-Id: I46ae4e6003a1839ee57f8e941a54bf479f7e532d
Related: SYS#4918
This change introduces two optional function pointers:
- power_ctrl_enc_rsl_params() - this function will be called by the
A-bis/RSL code in order to encode MS/BS Power control parameters
for CHANnel ACTIVation and MS/BS POWER CONTROL messages.
- power_ctrl_send_def_params() - this function will be called for
each transceiver on A-bis/RSL link establishment in order to
send default MS/BS Power control parameters.
Change-Id: Iba3ad5d8d549a6676050272f85b21c9b4c219d21
Related: SYS#4918
libosmocore > 1.4.0 is required (master, not yet released) since some
fixes done in osmo-bsc code where not cherry-picked to libosmocore APIs.
Depends: libosmocore.git I2bf5635b8536b11d69774d17ac1908019633e3af
Change-Id: I7d5e5ddd174463c2a3d957c8245d2911ce013681
Steve Langasek <steve.langasek@ubuntu.com> submitted some patches
against downstream osmo-bsc 1.3.0 because some possible null derefences
were detected by the compiler on Ubuntu s390x. Code has eveolved since
then and patch doesn't apply directly anymore, since related code
changed (we now use osmo_count in bsc_subscr_get).
The compiled allegedly claimed some null dereference in gsm_lchan_name.
In general code using that function seems to be doing checks for
existing lchan before calling it, or assuming the lchan pointer is not
null, so I couldn't find any major issue.
However, let's add a OSMO_ASSERT to make sure we can easily identify the
issue if an issue ever happens there, since the gsm_lchan_name should
clearly only be called on non null pointers.
Change-Id: If4d12cb1d95ee2a89244bb8f27df839871667387
This is needed in order to to proper feature support verification for
IPv6 when configuring the NSVC.
Before this patch, there could be a race condition where NSVC FSM
checked for BTS feature BTS_FEAT_IPV6_NSVC before it was negotiated
through BTS Get Attributes (Ack).
Fixes: OS#4870
Change-Id: I7c207eee0e331995ae04acec014fbd13d4d16280
Before this patch, Get Attributes was sent quicklyafter the OML link
became up, even if the BTS/BB_TRANSC objects were still powered off,
which is wrong since attributes should only be available after the
objects transition out of the Power off state.
Furthermore, information about get attr response already received will
be required in future patches to delay NSVC setting.
Related: OS#4870
Change-Id: I8ec39c7e1f956ffce9aecd58a5590c43200ba086
There's no real need to retrieve the trx before passing it to the
function, we can do that in the function itself and hence also simplify
the function itself.
Related: OS#4870
Change-Id: I7181510c5021ff2712c09ebc6ec8b13fdd8e8dc2
The condition was set in st_op_disabled_notinstalled_on_enter():
"""
site_mgr->peer_has_no_avstate_offline = (bts->type == GSM_BTS_TYPE_NANOBTS);
"""
However, at startup of the FSM the oneneter func of the default initial
state is not called. In any case, if called it would be too early since
the type is not known yet (because its parsed later on at the VTY with
the "type" command, that's after the "bts X" node is called and the
bts_sm is allocated.
So we need to make sure to always enable it, also for nanobts.
Change-Id: Ic6049a44ae3fca1b8e968fe800c268f579e7cad4
The only real 1-1 relationship between BTS NM objects is the one between
GPRS Cell and BTS (which is actually a BTS cell).
In our current osmo-bts implementation we don't care much since we only
handle 1-cell BTSses, but let's make the data structure organization
more generic.
Implementation notes:
The gsm_bts_sm is moved to its own file, APIs to allocate are added and
the new public object is hooked correctly in the allocation process of
osmo-bsc.
Change-Id: I06461b7784fa2a78de37383406e35beae85fbad8
MS Classmark 3 is optional, and thus can be NULL.
Change-Id: I4f1455a3db4972ea9843564b590e405c51083b47
Fixes: I39ae439d05562b35b2e47774dc92f8789fea1a57
Fixes: CID#215593 "Explicit null dereferenced"
The CTRL connect already includes 30 retries with .1 seconds delay each, so
there is no point in adding a fixed two second delay that unnecessarily drags
out test duration for each test.
Change-Id: I830fabbd037d6e945956a99aa3f5e4d4015ea165
In order to activate FACCH/SACCH repetition on the BTS, the classmark 3
IE in the CLASSMARK CHANGE message must be parsed and depending on the
Repeated ACCH Capability bit the RSL_IE_OSMO_REP_ACCH_CAP is added to
the RSL CHAN ACT und RSL CHAN MODE MODIFY. Since
RSL_IE_OSMO_REP_ACCH_CAP is a propritary IE, it may only be added for
BTS type osmo-bts.
Change-Id: I39ae439d05562b35b2e47774dc92f8789fea1a57
Related: OS#4796 SYS#5114
To be able to control the FACCH/SACCH repetition behavior inside the
BTS a one byte flag is sent to the BTS together with the
RSL_IE_OSMO_REP_ACCH_CAP IE. This patch adds the necessary VTY commands.
The sending of the flag is implemented in a follow-up patch.
See also: I39ae439d05562b35b2e47774dc92f8789fea1a57
Related: SYS#5114, OS#4796, OS#4794, OS#4795
Depends: libosmocore I6dda239e9cd7033297bed1deb5eb1d9f87b8433f
Change-Id: I083eaa2c30478912426e9c24a506f0b88836e190
When ICMI becomes zero for 'start-mode auto', the smod bits will remain
whatever start-mode was set in the previous osmo-bsc config. Instead, osmo-bsc
should clear the smod bits for 'start-mode auto' so that its MultiRate Config
does not vary depending on what was previously configured.
Change-Id: I1ec5bad0bce01cc425ee05ecf70c83ec662a226a
So far, the smod bits reflecting the start mode never made it to the
MultiRate Config IE: gsm48_mr_cfg_from_gsm0808_sc_cfg() always sets them
to zero, and the mode filtering fails to carry the BTS set bits.
Set smod bits according to BTS config after the filtering of available
modes.
Change-Id: I49691df01745a7c485bf165e897872c35fc4b147
Send the proper ICMI value, instead of always sending ICMI=1 regardless
of the AMR start-mode setting.
To avoid test fallout from the fix, we should first merge
osmo-ttcn3-hacks I4cff01c37d5c7e301e9a01f773b7e009a789519b
Change-Id: I577ff590d7588fd7e3ee4846c7955ab8f84cf2b1
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: Iff920ff3dbeb48bd871b7578470f27fe9d0f9516
Fixes: OS#4865
Harald Welte
Vadim Yanitskiy
Neels Hofmeyr
Philipp Maier
Pau Espin